RagWing RW4 Midwing Sport | |
---|---|
Role | Ultralight aircraft |
National origin | United States |
Manufacturer | Ragwing Aircraft Designs |
Designer | Roger Mann |
First flight | 1994 |
Status | Plans available |
Number built | 3 (January 1999) |
Developed from | RagWing RW1 Ultra-Piet |
The RagWing RW4 Midwing Sport is a single seat, strut-braced mid wing, single engine ultralight aircraft designed by Roger Mann and sold as plans by RagWing Aircraft Designs for amateur construction. [1] [2] [3] [4] [5]
The RW4 was derived from the high-wing RagWing RW1 Ultra-Piet as an FAR 103 Ultralight Vehicles compliant aircraft that would have an empty weight within that category's 254 lb (115 kg) empty weight limit. The RW4 was designed to be an ultralight replica of the classic 1931 vintage Church Midwing Sport Monoplane pylon racer. [1] [2] [4]
The RW4 airframe is constructed entirely from wood and covered with aircraft fabric. The landing gear is of conventional configuration with bungee suspension. As on the original Church design the RW4 has a gap between the wing and fuselage to allow the pilot to see downwards. The aircraft's installed power range is 20 to 48 hp (15 to 36 kW) and the standard engine was originally the 30 hp (22 kW) Kawasaki 340. The 35 hp (26 kW) Half VW four-stroke engine, 28 hp (21 kW) Rotax 277 two-stroke and 28 hp (21 kW) 2si 430 two-stroke have also been used. [1] [2] [3]
Partial kits and construction kits were available in the late 1990s, but today the aircraft is offered only in the form of plans. Reported construction time is 400–600 hours, although the designer claims 350 hours. [1] [2] [4] [5]
Data from Kitplanes, Purdy and RagWing [2] [3] [4]
General characteristics
Performance
The Fisher FP-404 is a Canadian single-seat, conventional landing gear, single-engined biplane kit aircraft designed for construction by amateur builders. Fisher Flying Products was originally based in Edgeley, North Dakota, USA but the company is now located in Woodbridge, Ontario, Canada.
The Preceptor N3 Pup is a family of ultralight, tube-and-fabric, high-wing, homebuilt aircraft. Kits were produced and marketed by Preceptor Aircraft, of Rutherfordton, North Carolina. The company was operating on a limited basis, actively selling plans online, but seems to have gone out of business in 2016.
The Hipp's Superbirds J-3 Kitten and related designs are a family of single-engined, single seat, high wing conventional landing gear-equipped aircraft available in kit form or as plans from Hipp's Superbirds of Saluda, North Carolina.
The Hy-Tek Hurricane 103 is a family of single-engined, high wing tricycle gear-equipped aircraft that were available in kit form from Hy-Tek Hurricane of Aurora, Oregon.
The Capella Javelin is a family of American open cockpit, high wing, tractor configuration, conventional landing gear-equipped ultralight aircraft that were produced in kit form by Capella Aircraft of Austin, Texas and intended for amateur construction.
The Kolb Firestar is a family of American open cockpit, high wing, pusher configuration, conventional landing gear-equipped ultralight aircraft that was produced in kit form by Kolb Aircraft of Phoenixville, Pennsylvania and intended for amateur construction.
The Light Miniature Aircraft LM-5 series is a family of American high-wing, conventional landing gear, strut-braced, single-engine ultralight aircraft that are intended to resemble the Piper PA-18 Super Cub. The designs are all available as plans from Light Miniature Aircraft of Okeechobee, Florida for amateur construction.
The RagWing RW1 Ultra-Piet is a family of single seat, parasol wing, single engine ultralight aircraft designed by Roger Mann and sold as plans by RagWing Aircraft Designs for amateur construction.
The RagWing RW7 Duster is a single seat, low wing, strut-braced, single engine ultralight aircraft designed by Roger Mann and sold as plans by RagWing Aircraft Designs for amateur construction.
The RagWing RW8 PT2S is a single or two seat, high wing, strut-braced, single engine ultralight aircraft designed by Roger Mann and sold as plans by RagWing Aircraft Designs for amateur construction.
The RagWing RW2 Special I is a family of biplane, single engine homebuilt aircraft designed by Roger Mann and sold as plans by RagWing Aircraft Designs for amateur construction.
The RagWing RW9 Motor Bipe is a family of single seat, open-frame fuselage, open-cockpit, single engine ultralight aircraft designed by Roger Mann and sold as plans by RagWing Aircraft Designs for amateur construction.
The RagWing RW11 Rag-A-Bond is a two-seat, high wing, strut-braced, conventional landing gear, single engine homebuilt aircraft designed by Roger Mann and sold as plans by RagWing Aircraft Designs for amateur construction.
The RagWing RW19 Stork is a family of two-seat, high wing, strut-braced, conventional landing gear, single-engine homebuilt aircraft designed by Roger Mann and sold as plans by RagWing Aircraft Designs for amateur construction.
The RagWing RW22 Tiger Moth is a two-seats-in-tandem, biplane, conventional landing gear, single engine homebuilt aircraft designed by Roger Mann and sold as plans by RagWing Aircraft Designs for amateur construction.
The Church Midwing JC-1, a.k.a. Church Mid-Wing Sport, is a midwing racing aircraft designed by James Church using the fuselage of a Heath aircraft.
The Aerotique Parasol is an American parasol-wing, strut-braced, conventional landing gear, single-seat, open cockpit, single engine in tractor configuration, ultralight aircraft that was designed as an ultralight version of the 1926 vintage Heath Parasol. It was originally produced by Yesteryear Aviation and later by Aerotique Aviation. The aircraft was supplied as factory-built only.
The Howland H-3 Pegasus is an American ultralight aircraft that was designed by Bert Howland and made available by Howland Aero Design in the form of plans for amateur construction, with kits provided by Aircraft Spruce & Specialty Co. The H-3 first flew in 1988.
The Fletcher Hercules is an American two-seat ultralight trike that was designed by AW Harrison and produced by Fletcher's Ultralights of Turlock, California, in the late 1990s and early 2000s. The aircraft was supplied as a kit for amateur construction and was also available as a completed aircraft.
The Norman Aviation Nordic II is a Canadian advanced ultralight aircraft, designed by Jacques Norman and produced by Norman Aviation of Saint-Anselme, Quebec, first flying in 1986. The aircraft is supplied as a kit for amateur construction or as a complete ready-to-fly-aircraft and remained in production through 2012.