Rakesh Agrawal | |
---|---|
Alma mater |
|
Known for | Contributions to separations and gas liquefaction, renewable energy |
Scientific career | |
Fields | Chemical engineering |
Institutions |
|
Rakesh Agrawal is the Winthrop E. Stone Distinguished Professor of Chemical Engineering at Purdue University in West Lafayette, Indiana. [1] He is a chemical engineer known for contributions to separations, cryogenic gas separation and liquefaction, and for contributions to renewable energy including the conversion of biomass to chemicals and fuels, inorganic solar cell fabrication, and the synergistic use of solar energy.
Dr. Agrawal received a B.Tech. in chemical engineering from the Indian Institute of Technology in Kanpur, India, in 1975; a M. Ch.E. from the University of Delaware in Dover, Delaware in 1977, and an Sc.D. in chemical engineering from the Massachusetts Institute of Technology (MIT) in Cambridge, Massachusetts in 1980. [2]
In 1980, Rakesh Agrawal joined Air Products in Trexlertown, Pennsylvania, where he was appointed to Air Products Fellow. [3]
In 2002, Agrawal was elected as a member of the National Academy of Engineering for contributions to the development and worldwide implementation of high-efficiency and high-purity cryogenic and non-cryogenic gas separation processes.
While at Air Products, Dr. Agrawal contributed to improvements in the efficiency of natural gas liquefaction, electronic gases manufacturing, cryogenic processing and gas separation. He led the development of the APX process for natural gas liquefaction that more than doubled the production from a single train. [4] [5] For semiconductor applications, Agrawal invented Column-Plus and Double Column-Plus [6] ultra high purity (UHP) nitrogen and UHP liquid oxygen processes that reduce product impurities to less than one part per billion. [7] [8]
He invented an efficient process to recover refrigeration from liquefied natural gas to produce liquid nitrogen and oxygen. [9] [10]
Agrawal introduced several firsts in the arena of separations using distillation. For multicomponent separations, he introduced a new class of satellite column arrangements and a new superstructure that completed the set of basic column configurations available for distillation. [11] [12] [13] He discovered a solution to the long-standing problem of making highly energy efficient thermally coupled columns operable by making vapor flow between columns unidirectional. [14] [15]
Agrawal presented a generalized framework to convert classical two-way thermal coupling to one-way liquid only transfer, thereby eliminating the challenge involved with the intercolumn vapor transfer between the thermally coupled distillation columns. [16] [17] [18] This enabled the creation of multi-effect distillation analogs of thermally-coupled distillation columns resulting in a further potential for up to 50% reduction in the energy consumption of the already efficient thermally coupled configuration. [19] [20]
Contrary to the assumption that fully thermally coupled systems are the most energy efficient among the basic configurations, Agrawal showed that the thermodynamic efficiency of this system can often be worse than the other configurations. [21] [15] [22] In 2001, for process intensification, he introduced a number of dividing wall column schemes including ones for side rectifier and side stripper configurations. [23] [24]
In 2003, Agrawal extended the concept of using dividing wall columns for batch distillation. [25] Later his team introduced a new class of dividing wall columns and a generalized method to draw the corresponding dividing wall column for any given thermally coupled configuration. [26] [27] [20] [28] [29] First, he led the development of the Shah and Agrawal method to elucidate all feasible basic n-1 distillation column configurations for the separation of an n-component non-azeotropic mixture with n greater than 3, [30] and then in collaboration with professor Mohit Tawarmalani, developed optimization methods to rank-list these thousands to millions of configurations according to their heat duty, exergy, and cost. [31] [32] [33] [34]
Agrawal has also published methods to draw membrane cascades using a limited number of compressors for high recovery of products at high purity. [35] [36]
In analogy to multicomponent distillation configurations, he introduced membrane cascade schemes for multi-component gas separation. [37] [38] [39] These membrane cascades can also be utilized for liquid separations by replacing compressors with pumps.
Since joining Purdue University in 2004, Agrawal has focused on creating more energy-efficient and low-cost processes for generating renewable energy. [1] He has outlined novel biomass conversion processes in which no biomass carbon is left unconverted to fuel. [40] [41] He suggested: (i) use of H2 from a renewable energy source in processes such as H2 CAR, and (ii) an H2Bioil process with biomass hydropyrolysis at a high pressure followed by immediate downstream hydrodeoxygenation to yield high energy density oil in two simple steps. [41] [42] [43] [44]
The H2Bioil process was successfully demonstrated through experiments and several companies have adapted the process and its variations. [45]
Agrawal has proposed methods for the solution-based fabrication of thin-film inorganic solar cells. For the nanoparticle ink-based route, his group achieved the highest inorganic solar cell efficiencies for Cu2Zn(Sn,Ge)Se4 (9.4%) and Cu(In,Ga)Se2 (15%). [46] [47] [48]
His team was the first to synthesize (1) Cu2ZnSnS4 nanoparticles [49] [50] and tailor the bandgap of Cu2ZnSnSe4 through partial substitution of Sn with Ge, and Cu with Ag; [51] [52] [53] [54] and (2) promising Cu3AsS4 and their thin films for solar cells. [55] [56]
Agrawal and his team devised an integrated solar thermal power cycle with daytime coproduction of hydrogen and electricity along with H2 storage followed by nighttime combustion of stored H2 using water as a working fluid to supply electricity around the clock with calculated overall sun to electricity efficiencies of 34% to 45%. [57] [58] This cycle stores energy with efficiencies similar to batteries but at a much higher storage density. [59] [58] To address the intermittency of solar energy, for storage of electricity at GWhr levels, Agrawal devised cycles using hydrocarbons and liquid CO2 as circulating fluids to supply electricity around the clock. [60]
Agrawal's current research is on the use of photovoltaic (PV) modules on agriculture land to cogenerate electricity while producing food, the concept of PV aglectric farming. [61] Unlike current PV modules that block sunlight and damage crops, Agrawal's group has suggested new PV modules that divert solar spectrum photons to plants while using the rest for electricity generation. [62] [63]
In collaboration with a team of experts from the Colleges of Agriculture and Engineering at Purdue University, he is leading an experimental and modelling study at the Purdue University's farm to demonstrate the concept of PV aglectric farming for major crops such as corn and soybean. [64]
Agrawal is the recipient of numerous awards. He received the National Medal of Technology & Innovation in 2011 from U.S. President Barack Obama, "[f]or an extraordinary record of innovations in improving the energy efficiency and reducing the cost of gas liquefaction and separation. These innovations have had significant positive impacts on electronic device manufacturing, liquefied gas production, and the supply of industrial gases for diverse industries.” [65] Agrawal has received several distinctions from the American Institute of Chemical Engineers including the Alpha Chi Sigma Award for Chemical Engineering Research (2017); [66] the Founders Award for Outstanding Contributions to the Field of Chemical Engineering (2011); [67] the Fuels and Petrochemicals Division Award (2008); Institute Lecturer (2005); [68] the Chemical Engineering Practice Award (2006); [69] the Clarence G. Gerhold Award, Separations Division (2001); [70] and the Institute Award for Excellence in Industrial Gases Technology (1998). [71] The American Chemical Society has honored Agrawal with the Award in Separations Science and Technology (2017). [72]
Agrawal was the youngest ever recipient of Air Products and Chemicals’ most prestigious Chairman's Award (1992). [73] Other awards he received from Air Products and Chemicals include the Extraordinary Quality Award (1992); the Diamond Award (2001); [74] and the Equipment Innovation Award (2003). In addition, Agrawal received the Industrial Research Institute Innovation Research Achievement Award (2007). [75] Agrawal's international distinctions include the Distinguished Alumnus Award, Indian Institute of Technology, Kanpur (2012), the inaugural Excellence in Gas Processing Award from the Annual Gas Processing Symposium, Qatar (2009), and the J&E Hall Gold Medal, Institute of Refrigeration, UK (2004).
Agrawal is a member of the U.S. National Academy of Engineering (2002); [76] Fellow of the American Academy of Arts and Sciences (2013); [77] Foreign Fellow of the Indian National Academy of Engineering (2011); Fellow of the U.S. National Academy of Inventors (2014); [78] Fellow of the American Institute of Chemical Engineers (AIChE) (2009); Faculty Fellow of the Hagler Institute for Advanced Study, Texas A&M University (2014); [79] Distinguished Member of the National Society of Collegiate Scholars (2014); [80] Member of Sigma Xi (2017), and Honorary Fellow of the Indian Institute of Chemical Engineers (2001).
Agrawal has received numerous awards from Purdue University including the Philip C. Wankat Graduate Teaching Award in Chemical Engineering (2019); [81] the Shreve Award for Excellence in Undergraduate Teaching (2013); and the Morrill Award (2014), [82] which is the highest award Purdue University confers upon a faculty member for excellence in all three dimensions of teaching, research and engagement. [83] Agrawal was also inducted into Purdue's Innovator Hall of Fame (2015). [84]
Agrawal has delivered numerous named lectures at universities including the Regents’ Lecturer, University of California, Los Angeles (2004); the Texas Institute of Advanced Studies, now Hagler Institute for Advanced Studies, Eminent Scholar Lecturer, Texas A&M University (2015); [79] Berkeley Lectures, University of California, Berkeley (2015); [85] the Distinguished Lecture of the Missouri Science & Technology Academy of Chemical Engineers, Rolla, MO, (2019); [86] the Professor B. D. Tilak Visiting Fellowship Lecture, Institute of Chemical Technology, University of Mumbai, India (2004); the Prof. C.V. Seshadri Memorial Distinguished Lecture, IIT Bombay, Mumbai, India, (2014); the Annual KAIST CBE Global Distinguished Lecturer, Korea, (2013). Agrawal was the Allan P. Colburn Honorary Lecturer at E. I. du Pont de Nemours and Company (2013).
Agrawal has delivered numerous named lectures at conferences including the Peter V. Danckwerts Lecture at the 10th World Congress of Chemical Engineering, Barcelona, Spain (2017) [87] and the C. K. Murthy Memorial Lecture, Indian Institute of Chemical Engineers (2008). [88] Honorary Professorships held by Agrawal include the V.V. Mariwala Visiting Professorship, UICT, Mumbai, India (2007); the ExxonMobil Visiting Chair Professor, Department of Chemical and Biomolecular Engineering, National University of Singapore, (2011-2014); and the Dr. Balwant S. Joshi Distinguished Visiting Professorship, Institute of Chemical Technology, Mumbai, India (2019-2020).
Agrawal is married to Manju Agrawal and they have two sons, Udit and Numit.
Agrawal has been a member of the technology boards of Air Products and Chemicals (2004-2007), Dow Chemical (2007-2014), [89] Kyrogen Ltd. (200-2010), [89] Weyerhaeuser (2008-2009), ATMI (2010-2012), and the Engineering Advisory Board of Genomatica (2009-2013). He was also a member of Aspen Tech Academy, Aspen Tech (2012-2017). [90] He has been an Advisory Council member of the Chemical and Biochemical Engineering Department of Cornell University (2002-2007), the Department of Chemical and Biomolecular Engineering of the University of Delaware (2012–present), [91] the Department of Chemical and Biomolecular Engineering of Lehigh University (2016-2020), and Chemical Engineering Department of Worcester Polytechnic Institute, Worcester, MA (2007-2012). [92] He was a Member of the Bourns College of Engineering Council of Advisors, University of California, Riverside (2003-2005). [93] He is a member of the Wanger Institute for Sustainable Energy Research (WISER) Board of Advisors, Illinois Institute of Technology Chicago (2009–present ). [94] He is currently a member of the Technical Review Panel for the Materials, Chemicals, & Computational Science, National Renewable Energy Lab (NREL), Golden, CO, (2019–present).
Agrawal has served on various committees of the U.S. National Academy of Engineering (NAE) including the Peer Committee of the Chemical Engineering Section (2004-2007), and Committee on Membership (CoM) (2017-2020). He served as Vice Chair (2011) and then as Chair (2012) of the Chemical Engineering Section of the NAE. He was a participant in the NAE workshop on ‘Educate to Innovate’, Washington DC, October 2013. [95] He is currently a member of the NAE Energy Working Group (EWG). He served on the National Research Council (NRC) Board on Energy and Environmental Sciences (BEES) (2005–11). [96] He participated on the Committee on Alternatives and Strategies for Future Hydrogen Production and Use (2002-2004) that produced a study report on The Hydrogen Economy, Opportunities, Barriers, and R&D Needs. [97] He also participated in the NRC Committee on Assessment of Resource Needs for Fuel Cell and Hydrogen Technologies (2006-2008) [98] which resulted in the publication of Transitions to Alternative Transportation Technologies – A Focus on Hydrogen. [99] He has served on various NRC panels including National Academies’ Renewables Panel for the Committee on America's Energy Future (2007-2008). [100] - [101]
Agrawal has been a volunteer in many American Institute of Chemical Engineers (AIChE) activities. He served on its Board of Directors (2006-2008); [102] and as a member of the Chemical Engineering Technology Operating Council (CTOC) (1999-2007) and as its Chair in 2002. He has served on several AIChE committees that include: the Awards Committee (1999-2003), Publications Quality Team (1995-1996), AIChE Energy Commission (2005-2007), Search Committee for AIChE Journal’s Chief-Editor (2000), AIChE Board’s Strategy Planning Meeting (2004), AIChE Fellow Review Committee (2006-2008), AIChE Board Award Committee (2008), AIChE International Committee (2008-2009), and Board of Trustees AIChE Foundation (2011). He has been an active member of the AIChE Separations Division and was its chair in 1994. As a chair, he was responsible for the AIChE’s 2nd Topical Conference on Separations (1995).
Agrawal has served on the editorial boards of prominent chemical engineering journals: Consulting Editor, Separations, AIChE Journal (1999-2008); [103] Editorial Advisory Board, Industrial & Engineering Chemistry Research (2010-2012); [104] Editorial Board, Current Opinion in Chemical Engineering (2011- 2021); [105] Editorial Advisory Board, Chemical Engineering Progress (2012-2020); [106] Consulting Editors Board, AIChE Journal (2012–present); [107] Editorial Board, Chemie Ingenieur Technik - Chemical Engineering and Technology – Energy Technology (2012-2023); [108] and Editorial Board member, Journal of Advanced Manufacturing and Processing (2018–present). [109]
He has served on the Programming Committees of several national and international conferences. They include the series of Foundations of Computer-Aided Process Design (FOCAPD), [110] Process Systems Engineering (PSE), [111] and Distillation & Absorption conferences.
Agrawal was a trustee of the Computer-aided Chemical Engineering (CACHE) corporation (1997-2005). [112] He was a U.S. Member of Commission A3 (1996-1999), and Commission A2 (2000-2007) of the International Institute of Refrigeration (IIR). He was also Vice President of Commission A2 from 2003 to 2007. His service to National Science Foundation (NSF) includes serving on the Panel on Process Design and Control (2005), the workshop on Separations (2004), [113] and the international benchmarking study on Systems Engineering for Renewable and Clean Energy Manufacturing (SEEM), (2012). He is a guest member of the European Federation of Chemical Engineering (EFCE) Working Party on Fluid Separations (2010–present). [114]
Agrawal served as a Panel Member that studied the Role of Indian Diaspora in Capacity Building for Affordable Solar Power and made a presentation on solar strategy to Indian Prime Minister Narendra Modi, External Affairs Minister Sushma Swaraj, and Energy Minister R. K. Singh in August 2018. He participated in the discussion of the Role of Indian Diaspora in Capacity Building for Affordable Solar Power at the 15th Pravasi Bharatiya Divas (PBD) Convention, Varanasi, India, January 2019. [115] He was a panelist on Sustainable Fuels as well as Advanced Materials sessions at Vaishvik Bhartiya Vaigyanik (VAIBHAV) Summit, in October 2020. He is a member of the Advisory Board of the Department of Sustainable Engineering, IIT Kanpur, India (2021–present).
Distillation, also classical distillation, is the process of separating the component substances of a liquid mixture of two or more chemically discrete substances; the separation process is realized by way of the selective boiling of the mixture and the condensation of the vapors in a still.
Desalination is a process that removes mineral components from saline water. More generally, desalination is the removal of salts and minerals from a substance. One example is soil desalination. This is important for agriculture. It is possible to desalinate saltwater, especially sea water, to produce water for human consumption or irrigation. The by-product of the desalination process is brine. Many seagoing ships and submarines use desalination. Modern interest in desalination mostly focuses on cost-effective provision of fresh water for human use. Along with recycled wastewater, it is one of the few water resources independent of rainfall.
A fractionating column or fractional column is equipment used in the distillation of liquid mixtures to separate the mixture into its component parts, or fractions, based on their differences in volatility. Fractionating columns are used in small-scale laboratory distillations as well as large-scale industrial distillations.
In chemistry, azeotropic distillation is any of a range of techniques used to break an azeotrope in distillation. In chemical engineering, azeotropic distillation usually refers to the specific technique of adding another component to generate a new, lower-boiling azeotrope that is heterogeneous, such as the example below with the addition of benzene to water and ethanol.
Environmental technology (envirotech) is the use of engineering and technological approaches to understand and address issues that affect the environment with the aim of fostering environmental improvement. It involves the application of science and technology in the process of addressing environmental challenges through environmental conservation and the mitigation of human impact to the environment.
Solar desalination is a desalination technique powered by solar energy. The two common methods are direct (thermal) and indirect (photovoltaic).
Continuous distillation, a form of distillation, is an ongoing separation in which a mixture is continuously fed into the process and separated fractions are removed continuously as output streams. Distillation is the separation or partial separation of a liquid feed mixture into components or fractions by selective boiling and condensation. The process produces at least two output fractions. These fractions include at least one volatile distillate fraction, which has boiled and been separately captured as a vapor condensed to a liquid, and practically always a bottoms fraction, which is the least volatile residue that has not been separately captured as a condensed vapor.
In chemical processing, a packed bed is a hollow tube, pipe, or other vessel that is filled with a packing material. The packed bed can be randomly filled with small objects like Raschig rings or else it can be a specifically designed structured packing. Packed beds may also contain catalyst particles or adsorbents such as zeolite pellets, granular activated carbon, etc.
Molecular distillation is a type of short-path vacuum distillation, characterized by an extremely low vacuum pressure, 0.01 torr or below, which is performed using a molecular still. It is a process of separation, purification and concentration of natural products, complex and thermally sensitive molecules for example vitamins and polyunsaturated fatty acids. This process is characterized by short term exposure of the distillate liquid to high temperatures in high vacuum in the distillation column and a small distance between the evaporator and the condenser around 2 cm. In molecular distillation, fluids are in the free molecular flow regime, i.e. the mean free path of molecules is comparable to the size of the equipment. The gaseous phase no longer exerts significant pressure on the substance to be evaporated, and consequently, rate of evaporation no longer depends on pressure. The motion of molecules is in the line of sight, because they do not form a continuous gas anymore. Thus, a short path between the hot surface and the cold surface is necessary, typically by suspending a hot plate covered with a film of feed next to a cold plate with a line of sight in between.
Batch distillation refers to the use of distillation in batches, meaning that a mixture is distilled to separate it into its component fractions before the distillation still is again charged with more mixture and the process is repeated. This is in contrast with continuous distillation where the feedstock is added and the distillate drawn off without interruption. Batch distillation has always been an important part of the production of seasonal, or low capacity and high-purity chemicals. It is a very frequent separation process in the pharmaceutical industry.
Acetone–butanol–ethanol (ABE) fermentation, also known as the Weizmann process, is a process that uses bacterial fermentation to produce acetone, n-butanol, and ethanol from carbohydrates such as starch and glucose. It was developed by chemist Chaim Weizmann and was the primary process used to produce acetone, which was needed to make cordite, a substance essential for the British war industry during World War I.
Edward L. Cussler is an American chemical engineer and professor in the department of chemical engineering and materials science at the University of Minnesota. He is internationally known for his work in fluid mechanics, transport phenomena, and gas separations, especially in the areas of membranes and gas sorption. Cussler is an author of more than 250 academic papers, dozens of patents, and five books including the acclaimed text: “Diffusion”. He has served as director, vice president and president of the American Institute of Chemical Engineers, and he presented the AIChE Institute Lecture in 2014. Cussler and his wife Betsy, a former teacher at Edina High School, are long-time residents of Minneapolis, Minnesota.
An air separation plant separates atmospheric air into its primary components, typically nitrogen and oxygen, and sometimes also argon and other rare inert gases.
Membrane distillation (MD) is a thermally driven separation process in which separation is driven by phase change. A hydrophobic membrane presents a barrier for the liquid phase, allowing the vapour phase to pass through the membrane's pores. The driving force of the process is a partial vapour pressure difference commonly triggered by a temperature difference.
The use of ionic liquids in carbon capture is a potential application of ionic liquids as absorbents for use in carbon capture and sequestration. Ionic liquids, which are salts that exist as liquids near room temperature, are polar, nonvolatile materials that have been considered for many applications. The urgency of climate change has spurred research into their use in energy-related applications such as carbon capture and storage.
Eugeny Kenig is a Russian-German scientist and head of the chair of Fluid Process Engineering at the Department of Mechanical Engineering at University of Paderborn.
C. Judson King is an American chemical engineer, researcher, administrator and educator. He is professor emeritus at University of California, Berkeley, and UC universitywide provost and senior vice president of academic affairs, emeritus, at University of California. He is the former director of Center for Studies in Higher Education and the former dean of College of Chemistry at UC Berkeley.
Joan F. Brennecke is an American chemical engineer who is the Cockrell Family Chair in Engineering in the McKetta Department of Chemical Engineering at the University of Texas at Austin. Brennecke develops supercritical fluids, ionic liquids and novel spectroscopic methods.
Ignacio E. Grossmann is an American chemical engineer. He is the R. R. Dean University Professor in the department of chemical engineering at Carnegie Mellon University. Grossmann received his B.S. degree from Universidad Iberoamericana in Mexico City in 1974. He did his M.S. and Ph.D. at Imperial College London with Roger W. H. Sargent in 1975 and 1977 respectively. In 2015 he was the first recipient of the Sargent Medal of the Institution of Chemical Engineers, named in honor of his doctoral advisor.
Hilkka Inkeri Kenttämaa is a researcher in organic and bioorganic mass spectrometry, and the Frank Brown Endowed Distinguished Professor of Chemistry at Purdue University. She is a pioneer in distonic radical cation research and laser-induced acoustic desorption.