Raptor (Gardaland)

Last updated
Raptor
Raptor Gardaland 2011.jpg
Part of Raptor's layout
Gardaland Italy
LocationGardaland Italy
Coordinates 45°27′25″N10°42′43″E / 45.457056°N 10.711949°E / 45.457056; 10.711949 Coordinates: 45°27′25″N10°42′43″E / 45.457056°N 10.711949°E / 45.457056; 10.711949
StatusOperating
Opening dateApril 1, 2011 (2011-04-01)
General statistics
Type Steel  Wing Coaster
Manufacturer Bolliger & Mabillard
Model Wing Coaster
Track layoutTwister
Lift/launch system Chain lift hill
Height108.3 ft (33.0 m)
Length2,526.3 ft (770.0 m)
Speed90 km/h (56 mph)
Inversions 3 (Corkscrew, Zero-G Roll, Inline Twist)
Duration1 minute and 30 seconds
Max vertical angle65°
Height restriction140–195 cm (4 ft 7 in – 6 ft 5 in)
Trains2 trains with 7 cars. Riders are arranged 4 across in a single row for a total of 28 riders per train.
Raptor at RCDB
Pictures of Raptor at RCDB

Raptor is a steel roller coaster at the Gardaland amusement park in Lake Garda, Italy. The ride is a prototype Wing Coaster design by Swiss roller coaster manufacturer Bolliger & Mabillard. Raptor opened to the public on April 1, 2011. The ride begins from an underground station and features two water splash elements. The layout features several roll overs. The trains hang over both sides of the track like X2 at Six Flags Magic Mountain but the seats do not spin. [1]

Contents

Ride experience

After departing from the underground station, the train makes a left turn into the lift hill. After reaching the top of the 108.3-foot (33.0 m) lift, the train drops back to the ground before making a sharp left over-banked turn. The train then enters a corkscrew followed by a slight upward left turn. Next, the train goes back down slightly, also going through a set of trim brakes. The train then makes another sharp left turn leading into a 55.8-foot (17.0 m) zero-gravity-roll. After a sharp left turn, and right turn, the train enters a 32.8-foot (10.0 m) inline twist, going through the supports of the track, a fake tree and a steel rectangle. The train then makes a left turn into the final brake run where the train then enters the station and the next riders board. [2]

The ride lasts about 1 minute and 30 seconds.

See also

Related Research Articles

Superman: Krypton Coaster Roller coaster in Texas, U.S.

Superman: Krypton Coaster is a steel roller coaster located at Six Flags Fiesta Texas amusement park in San Antonio. Manufactured by Bolliger & Mabillard, the Floorless Coaster model opened to the public in 2000 as one of the first of its kind in the world. The well-received ride held the title for the world's tallest vertical loop from its opening until 2013. Superman: Krypton Coaster stands 168 feet (51 m) tall and reaches a maximum speed of 70 mph (110 km/h).

Raptor (Cedar Point) Inverted roller coaster

Raptor is a steel inverted roller coaster designed by Bolliger & Mabillard at Cedar Point in Sandusky, Ohio, United States. When built in 1994, it broke many records and held many firsts when it opened. Instead of having a short layout designed to fit into a compact area like Batman: The Ride, Raptor was designed with a larger, 3,790-foot (1,160 m) layout, making it the tallest, fastest and longest inverted roller coaster in the world when it opened. It features six inversions, including a cobra roll, a first for inverted roller coasters. The ride is themed as a bird of prey.

Patriot (Worlds of Fun) Roller coaster in Kansas City, Missouri

Patriot is an inverted roller coaster located at Worlds of Fun in Kansas City, Missouri. Manufactured by Bolliger & Mabillard, the inverted coaster opened to the public on April 8, 2006. It features four inversions, a height of 149 feet (45 m), and a track length of 3,081 feet (939 m).

Tatsu Flying roller coaster

Tatsu is a flying roller coaster designed by Bolliger & Mabillard at the Six Flags Magic Mountain amusement park located in Valencia, California, United States. Manufactured by Bolliger & Mabillard, it opened as the tallest, fastest, and longest flying coaster in the world on May 13, 2006. It became the park's seventeenth coaster, featuring a height of 170 feet (52 m), a track length of 3,602 feet (1,098 m), and a maximum speed of 62 mph (100 km/h). Tatsu also features the world's tallest pretzel loop and the only zero-gravity roll inversion on a flying coaster model. Nearly a decade later, The Flying Dinosaur opened at Universal Studios Japan in 2016, breaking Tatsu's length record and matching its speed. In its debut season, Tatsu was ranked 40th among steel coasters in the annual Golden Ticket Awards from Amusement Today, peaking with a rank of 28 in 2012.

Steel Vengeance Roller coaster at Cedar Point

Steel Vengeance, formerly known as Mean Streak, is a steel roller coaster at Cedar Point in Sandusky, Ohio. The roller coaster was rebuilt by Rocky Mountain Construction (RMC) and opened to the public on May 5, 2018. It features RMC's patented I-Box Track technology utilizing a significant portion of Mean Streak's former support structure. Upon completion, Steel Vengeance set 10 world records.

The Voyage (roller coaster) Amusement ride

The Voyage is a wooden roller coaster located at Holiday World & Splashin' Safari in Santa Claus, Indiana. Designed and built by The Gravity Group with the help of designers Mike Graham, Korey Kiepert, Larry Bill, Chad Miller, and former park President Will Koch, the roller coaster is themed to the famous voyage of the Mayflower by Pilgrims to North America in 1620. It opened to the public on May 6, 2006. It is widely considered one of the best wooden roller coasters ever built, and was awarded by TIME Magazine as the Best Roller Coaster in the world in 2013.

Goliath (Six Flags Over Georgia) Steel Hyper Coaster

Goliath is a steel roller coaster located at the Six Flags Over Georgia amusement park in Cobb County, Georgia. The Hyper Coaster model manufactured by Bolliger & Mabillard climbs to a height of 200 feet (61 m) and reaches a maximum speed of 70 mph (110 km/h). Prior to its construction, the Great Gasp and Looping Starship attractions were removed to make room for Goliath, which opened to the public on April 1, 2006. It ranked as the fourth-best new ride of 2006 in the annual Golden Ticket Awards publication from Amusement Today and the ninth-best steel roller coaster overall, with its peak ranking of fourth occurring in 2009 and 2011.

Scream (roller coaster) Steel roller coaster

Scream is a steel roller coaster at Six Flags Magic Mountain. Manufactured by Bolliger & Mabillard, the Floorless Coaster model was the park's sixteenth roller coaster and is located in the Screampunk District area of the park. The 150-foot-tall (46 m) ride consists of a series of roller coaster elements including seven inversions ranging from a zero-g roll to interlocking corkscrews. The ride is a mirror image of Medusa at Six Flags Great Adventure.

Batman: The Dark Knight (roller coaster) Roller coaster at Six Flags New England

Batman: The Dark Knight is a steel floorless roller coaster designed by Bolliger & Mabillard located in the Gotham City section of Six Flags New England. The roller coaster has 2,600 feet (790 m) of track, reaches a maximum height of 117.8 feet (35.9 m) and features five inversions. The coaster was announced on February 6, 2002 and opened to the public on April 20, 2002. In 2008, the ride's name was changed to Batman: The Ride to avoid confusion with Six Flags New England's installation of The Dark Knight Coaster that was planned to be built at the park; but after the project was cancelled, the ride's name reverted to Batman: The Dark Knight.

Phantoms Revenge Amusement ride

Phantom's Revenge, formerly named Steel Phantom, is a steel roller coaster at Kennywood amusement park in West Mifflin, Pennsylvania. When it opened as Steel Phantom in 1991, it featured the fastest speed and longest drop of any roller coaster in the world. It features a unique characteristic of having a second drop that is longer than its first. The ride was originally manufactured by Arrow Dynamics but was later modified and renovated by D.H. Morgan Manufacturing for the 2001 season, when it reopened as Phantom's Revenge. The drop and track length were both increased, and its four inversions were removed enabling the ride to remove its unpopular over-the-shoulder restraints.

Talon (roller coaster) Inverted roller coaster at Dorney Park

Talon is an inverted roller coaster located at Dorney Park & Wildwater Kingdom in Allentown, Pennsylvania. Manufactured by Bolliger & Mabillard and designed by Werner Stengel at a cost of $13 million, Talon opened to the public in 2001 and was marketed as the tallest and longest inverted coaster in the Northeast. It stands 135-foot (41 m) tall, reaches a maximum speed of 58 mph (93 km/h), and features four inversions.

Maverick (roller coaster) Launched roller coaster at Cedar Point

Maverick is a steel roller coaster located at Cedar Point in Sandusky, Ohio. Manufactured by Intamin at a cost of $21 million, it was the 500th roller coaster designed by German engineer Werner Stengel and the first to feature a twisted horseshoe roll element. There are two launch points along the 4,450-foot (1,360 m) track that utilize linear synchronous motors (LSM). Maverick features a beyond-vertical drop of 95 degrees and reaches a maximum speed of 70 mph (110 km/h).

Silver Bullet (Knotts Berry Farm) Inverted roller coaster

Silver Bullet is a western-themed steel inverted roller coaster designed by Bolliger & Mabillard located at Knott's Berry Farm, an amusement park in Buena Park, California. The $16 million roller coaster was announced on December 1, 2003 and opened on December 7, 2004. A first rider auction was also held where people would bid on seats to be the first riders. The track is approximately 3,125 feet (952 m) long and the lift hill is about 146 feet (45 m) tall. The ride lasts two minutes and thirty seconds and features six inversions including a vertical loop, cobra roll, zero-g roll, and two corkscrews.

Roller coaster elements are the individual parts of roller coaster design and operation, such as a track, hill, loop, or turn. Variations in normal track movement that add thrill or excitement to the ride are often called "thrill elements".

Diamondback (Kings Island) Steel roller coaster

Diamondback is a steel roller coaster located at Kings Island in Mason, Ohio, United States. Manufactured by Bolliger & Mabillard (B&M), the ride opened in 2009 as the first hypercoaster to feature a splashdown effect and the first B&M roller coaster at Kings Island. It is located in Rivertown just behind International Street and the Eiffel Tower. Diamondback was the biggest investment in Kings Island’s history at the time, costing $22 million to build, but that figure was surpassed in 2014 by Banshee. The coaster features a 230-foot (70 m) lift hill with a 215-foot (66 m) drop and a maximum speed of 80 mph (130 km/h). It is similar to Behemoth at Canada's Wonderland in statistics, layout, and seating.

Intimidator (roller coaster) Steel roller coaster at Carowinds

Intimidator is a steel roller coaster built by Bolliger & Mabillard at Carowinds in Charlotte, North Carolina. The roller coaster is located in the Celebration Plaza section of the park. Intimidator is the thirteenth roller coaster installed at Carowinds and is located on the site of the former Carowinds River Adventure near the entrance of the theme park. It is currently one of the tallest, fastest and longest roller coasters in the Southeast with a 232-foot (71 m) lift hill, a top speed of 75 mph (121 km/h) and a track length of 5,316 feet (1,620 m). It was announced on August 26, 2009, and opened March 27, 2010. The roller coaster's name comes from the nickname of NASCAR driver Dale Earnhardt.

The Swarm (roller coaster) Steel Wing roller coaster

The Swarm is a steel roller coaster located at Thorpe Park in the United Kingdom. The Swarm was the world's second Wing Coaster model designed by Swiss roller coaster manufacturer Bolliger & Mabillard and the only one located in the United Kingdom. Construction commenced in May 2011, and the coaster opened on 15 March 2012. From 2013 until 2015, the last two rows of each train faced backwards, while the first five rows faced forward. This was restored to the original for safety reasons in 2016, with all riders facing forward once again.

Wild Eagle Roller coaster at Dollywood

Wild Eagle is a steel Wing Coaster built by Bolliger & Mabillard at the Dollywood amusement park in Pigeon Forge, Tennessee. It is the first of its kind in the United States and opened to the media on March 23, 2012 before opening to the public on March 24, 2012. The roller coaster reaches a height of 210 feet (64 m) and reaches speeds of 61 miles per hour (98 km/h). In September 2012, the ride was voted as the best new ride of 2012 in Amusement Today's Golden Ticket Awards.

Hair Raiser

Hair Raiser is a steel floorless roller coaster at Ocean Park Hong Kong in Hong Kong Island, Hong Kong. Manufactured by Bolliger & Mabillard, the coaster opened on December 8, 2011, and is the twelfth floorless coaster to be built. The large smiling face entrance is loosely based on Luna Park Sydney in Australia.

Nitro (Imagicaa) Floorless coaster at Imagicaa in India

Nitro is a steel Floorless Coaster at Imagicaa amusement park in Khopoli, Maharashtra, India. Manufactured by Bolliger & Mabillard, the roller coaster reaches a maximum height of 132 feet (40 m) and a maximum speed of 65.2 miles per hour (104.9 km/h). The coaster also features five inversions. Nitro opened to the public in October 2013.

References

  1. Marden, Duane. "Raptor  (Gardaland)". Roller Coaster DataBase . Retrieved 18 November 2010.
  2. "Raptor POV at Gardaland". rudancer85 (YouTube). April 1, 2011. Retrieved December 16, 2012.