Robot (camera)

Last updated

Robot was a German imaging company known originally for clockwork cameras, later producing surveillance (Traffipax) and bank security cameras. Originally created in 1934 as a brand of Otto Berning, it became part of the Jenoptik group of optical companies in 1999, and specializes in traffic surveillance today.

Contents

The motorized amateur cameras powered by clockwork (spring) motors were first made in 1934, and ended with a special limited edition collector's model, "Star Classic", in 1996. The Robot film cameras used 35 mm film, mostly in square 24 × 24 mm image format, but many used 18 × 24 mm (half-frame) and 24 × 36 mm (standard Leica format), and non-standard formats such as 6 × 24 mm (Recorder 6), 12 × 24 mm (Recorder 12) and 16 × 16 mm (Robot SC).

Camera Models

Robot I

Around 1930 Heinz Kilfitt, a trained watchmaker, designed a new 35 mm film compact camera using a 24×24 mm frame format (instead of the Leica 24×36 mm or cine 18×24 mm formats). The 24×24mm square frame provided many advantages, including allowing over 50 exposures per standard roll of Leica film instead of 36. Kodak and Agfa rejected the design, and it was sold to Hans Berning, who set up the Otto Berning firm.

Otto Berning was granted its first Robot patent in 1934; a US patent was granted in 1936. [1] The camera was originally intended to come in two versions: Robot I, without motor, and Robot II with a spring motor. Its release was delayed and already the first camera "Robot I" included its hallmark spring motor. The first production cameras had a stainless steel body, a spring drive that could shoot 4 frames per second, and a rotary shutter with speeds from 1 to 1/500th second. The camera used proprietary "Type K" cartridges, not the now-standard 35 mm cartridges introduced in the same year by Kodak's Dr. August Nagel Kamerawerk for the Retina. The camera does not have a rangefinder, as it was designed for use mostly with short focal length lenses (e.g. 40 mm) with great depth of field.

The Robot I was quite small, the body measuring 108 mm (4¼ inches) long, 63 mm (2½ inches) high, and 32 mm (1¼ inches) deep. A very sharp zone-focusing f/2.8, 3.25 cm Zeiss Tessar lens added 125mm (1/2 inch) to the camera depth. It was about the size of the much later Olympus Stylus although it weighed about 567 grams (20 ounces), approximately the weight of a modern SLR. The die-cast zinc and stamped stainless steel body was crammed with clockwork. A spring motor on the top plate provided the driving force for a rotary behind-the-lens shutter and a sprocket film drive. The film was loaded into cassettes in a darkroom or changing bag. The cassettes appear to be based on the Agfa Memo cassette design, the now-standard Kodak 35 mm cassette not yet being popular in Germany. In place of the velvet light trap on modern cassettes, the Robot cassette used spring pressure and felt pads to close the film passage. When the camera back was shut, the compression opened the passage and the film could travel freely from one cassette to another.

The rotary shutter and the film drive are like those used in cine cameras. When the shutter release is pressed, a light-blocking shield lifts and the shutter disc rotates a full turn exposing the film through its open sector; when the pressure is released the light-blocking shield returns to its position behind the lens, and the spring motor advances the film and recocks the shutter. This is almost instantaneous. With practice a photographer could take 4 or 5 pictures a second. Each winding of the spring motor was good for about 25 pictures, half a roll of film. Shutter speed was determined by spring tension and mechanical delay since the exposure sector was fixed. The Robot I had an exposure range of 1 to 1/500, and provision for time exposures.

The camera had other features not specifically related to action photography. The small optical viewfinder could be rotated 90 degrees to permit pictures to be taken in one direction while the photographer was facing in another. When the viewfinder was rotated, the scene was viewed through a deep purple filter similar to those used by cinematographers to judge the black and white contrast of an image. The camera had a built-in deep yellow filter which could be positioned behind the lens.

Robot II

Robot II with Xenar 1:2,8/37,5 lens Robot 02 b.JPG
Robot II with Xenar 1:2,8/37,5 lens

In 1938 Berning introduced the Robot II, a slightly larger camera with some significant improvements but still using the basic mechanism. Among the standard lenses were a 3 cm Zeiss Tessar and a 3.75 cm Zeiss Tessar in f/2.8 and 3.5 variations, a f/2.0, 40 mm Zeiss Biotar and f/4, 7.5 cm Zeiss Sonnar. The film cassette system was redesigned, and the 1951 IIa accepted a standard 35 mm cassette. The special Robot cassettes type-N continued to be used for take-up. A small Bakelite box was sold to allow colour film to be rewound into the original cassettes as required by film processing companies. The camera was synchronized for flash. The swinging viewfinder was retained, but now operated by a lever rather than moving the entire housing. Both the deep purple and yellow filters were eliminated in the redesign. Some versions were available with a double-wind motor which could expose 50 frames on one winding. Civilian versions of the Robot were discontinued at the outset of the Second World War, but it was used as a bomb damage assessment camera by the Luftwaffe, mounted in the tail of JU87 (Stuka) dive bombers. This was an electrically driven camera using large cassettes possibly as many as 300 24 x 24mm images. Unlike the central Leica 250GG camera in the JU87, which was switched on automatically when the dive brakes were applied, the Robot camera had to be switched on manually. In the stress of the automatic pull out, when it was not uncommon for the pilot to black out from the g levels, switching on the bomb damage assessment camera was frequently forgotten.


Robot Star and Junior

Robot Star 50 Robot Star 50.jpg
Robot Star 50

In the 1950s Robot introduced the Robot Star. Film could now be rewound into the feed cassette in the camera as in other 35 mm cameras.

Robot then introduced the "Junior", an economy model with the quality and almost all the features of the "Star" but without the angle finder or the rewind mechanism.

In the late 1950s the company, now called Robot-Berning, redesigned the Robot Star and created the Vollautomat Star II. The length stayed the same but the height increased by 125mm (half an inch). The new higher top housing disposed of the right angle finder and instead included an Albada finder with frames for the factory-fitted 38/40 mm and 75 mm lenses. The drive and shutter too were improved. By 1960 the hallmark stamped steel body was replaced by heavier die castings. The camera became, with slight changes, the Robot Star 25 and Star 50. The Robot Star 25 could expose 25 frames on a single winding, and the double-motor Robot Star 50 could expose 50 frames. Since most Robot cameras by then were sold for industrial use where the camera was fixed in position, Robot also introduced versions without a finder, and even without rewind. Although most production dates from the 1950-1960s era, essentially the same camera continued to be manufactured into the late 1990s.

Robot Royal

Robot Royal II viewfinder camera Robot Royal II.jpg
Robot Royal II viewfinder camera
ROBOT ROYAL II W Schneider Kreuznach Tele-Xenar 1:5.5 200mm lens and a TEWE 35-200mm zoom viewfinder 1-ROBOT ROYAL II W TEWE 35-200mm zoom viewfinder.jpg
ROBOT ROYAL II W Schneider Kreuznach Tele-Xenar 1:5.5 200mm lens and a TEWE 35-200mm zoom viewfinder

Robot-Berning also produced enlarged versions of the Robot, the Robot Royal 18, 24 and 36, with built-in rangefinder and with an autoburst mode of operation capable of shooting 6 frames per second. The camera was about the size of a Leica M3 and weighed 907g (almost 2 pounds). It was equipped with a Schneider Xenar 45 mm f/2.8 lens. The Robot Royal 36 took a standard 35 mm still picture but was identical to the Royal 24 in all other regards. They retained the behind-the-lens rotary shutter with speeds from 1/2 to 1/500 s.

Robot Royal II is a larger viewfinder camera, it has no rangefinder, it does not have burst mode, it is a stripped down Robot Royal III.

Robot Royal Model III rangefinder camera Robot Royal model III.jpg
Robot Royal Model III rangefinder camera

Robot Royal III has a main spring, when tightened, the camera can take 4 to 5 pictures in succession. It has a built in rangefinder, eight interchangeable bayonet mount lenses.

There are two versions, Robot Royal 36, produce 36 24x36mm images on a roll of 135 film, Robot Royal 24 makes 50 24x24mm images on 135 film

A version for instrumentation (and traffic) was also created on the basis of the Royal design: the Recorder. These cameras were like the Royal but without viewfinder or rangefinder. They had interfaces to motors and detachable backs to support bulk film cassettes. A special parallel series of the Royal too was available that included these features. While the Royal had only limited market success, the Recorder was well accepted. It became the centerpiece of the company's portable document capture, traffic control and security solutions, and continues to be the standard Robot camera for instrumentation applications.

Military and government models

During the Second World War, specially adapted models were made for the German Luftwaffe.

Robot Luftwaffen Eigentum with Robot 12V solenoid shutter actuator Robot Luftwaffen Eigentum.jpg
Robot Luftwaffen Eigentum with Robot 12V solenoid shutter actuator
Robot Luftwaffen Eigentum Robot Luftwaffen Eigentum black.jpg
Robot Luftwaffen Eigentum

During the Cold War, Robots had a large following in the espionage business. The small camera could be concealed in a briefcase or a handbag, the lens poking though a decorative hole, and activated repeatedly by a cable release concealed in the handle. The company was well aware of this market and produced a variety of accessories which made the camera even more suitable for covert photography.

Sequence photography

While the Robots were capable of sequence photography, the shutter that made this possible placed some constraints upon taking lenses and shutter speeds. To reach speeds as high as 1/500 second the inertia of the thin vulcanite shutter disc had to be kept at a minimum, requiring a small-diameter disc with a minimal sector opening. The screw in lens mount was 26 mm in diameter. The clear lens opening was only 20 mm. In contrast, Leica's mount was almost twice as large at 39 mm. Further, to permit lens interchangeability, the shutter was mounted behind the lens so the disc interrupted the expanding light cone. This placed some limits on lens design. While the 75mm Sonnar could be used with the aperture set to f/22, the Tele-Xenar suffered from some shutter disc vignetting unless opened more.

The maximum focal length lens for general photographic use that could be fitted with acceptable vignetting was 75 mm, although telephotos up to 600 mm were offered. A 150 mm Tele-Xenar was available for long-distance action photography, but it produced a vignetted circular image on the 24 × 24 mm frame. The lack of a rangefinder on the Robot and Robot Star required zone focusing of these long lenses: every shot had to be estimated or pre-measured. All of the mechanical movement made for a noisy camera, although not as noisy as some modern motor drives. For an extra fee, Robot-Berning supplied silenced versions with nylon gears.

Within their limits the Robots did an excellent job of sequence photography. The standard 38 mm f/2.8 Xenar lenses were extremely sharp, even by today's standards, and zone focusing worked well on rapid action with short focal length lenses. The reliable motor drive was as fast, if not faster, than later electrical drives, and there were no batteries to run down. Flash could be used at any speed. The square frame was big enough, with modern films, for A4 (210 x 297 mm, or 8.25"× 11.75") or greater enlargements, and 50 pictures could be taken on a standard 36-exposure roll. The cameras, especially the later ones built to industrial standards, will take much abuse and still keep functioning.

Related Research Articles

<span class="mw-page-title-main">Single-lens reflex camera</span> Camera that typically uses a mirror and prism system

A single-lens reflex camera (SLR) is a camera that typically uses a mirror and prism system that permits the photographer to view through the lens and see exactly what will be captured. With twin lens reflex and rangefinder cameras, the viewed image could be significantly different from the final image. When the shutter button is pressed on most SLRs, the mirror flips out of the light path, allowing light to pass through to the light receptor and the image to be captured.

<span class="mw-page-title-main">Rangefinder camera</span> Camera fitted with a rangefinder

A rangefinder camera is a camera fitted with a rangefinder, typically a split-image rangefinder: a range-finding focusing mechanism allowing the photographer to measure the subject distance and take photographs that are in sharp focus. Most varieties of rangefinder show two images of the same subject, one of which moves when a calibrated wheel is turned; when the two images coincide and fuse into one, the distance can be read off the wheel. Older, non-coupled rangefinder cameras display the focusing distance and require the photographer to transfer the value to the lens focus ring; cameras without built-in rangefinders could have an external rangefinder fitted into the accessory shoe. Earlier cameras of this type had separate viewfinder and rangefinder windows; later the rangefinder was incorporated into the viewfinder. More modern designs have rangefinders coupled to the focusing mechanism so that the lens is focused correctly when the rangefinder images fuse; compare with the focusing screen in non-autofocus SLRs.

<span class="mw-page-title-main">135 film</span> Photographic film format

135 film, more popularly referred to as 35 mm film or 35 mm, is a format of photographic film used for still photography. It is a film with a film gauge of 35 mm (1.4 in) loaded into a standardized type of magazine – also referred to as a cassette or cartridge – for use in 135 film cameras. The engineering standard for this film is controlled by ISO 1007 titled '135-size film and magazine'.

<span class="mw-page-title-main">Nikon F</span> Camera model

The Nikon F camera, introduced in April 1959, was Nikon's first SLR camera. It was one of the most advanced cameras of its day. Although many of the concepts had already been introduced elsewhere, it was revolutionary in that it was the first to combine them all in one camera. It was produced until October 1973 and was replaced by the Nikon F2. Aspects of its design remain in all of Nikon's subsequent SLR cameras, through the current Nikon F6 film and Nikon D6 digital models. The "F" in Nikon F was selected from the term "re-f-lex", since the pronunciation of the first letter "R" is not available in many Asian languages. That tradition was carried all the way through their top line of Nikon cameras until the introduction of the Nikon D1 (digital) cameras decades later.

<span class="mw-page-title-main">Leica Camera</span> German optics company

<span class="mw-page-title-main">Tessar</span> Photographic lens design

The Tessar is a photographic lens design conceived by the German physicist Dr. Paul Rudolph in 1902 while he worked at the Zeiss optical company and patented by Zeiss in Germany; the lens type is usually known as the ZeissTessar. Since its introduction, millions of Tessar and Tessar-derived lenses have been manufactured by Zeiss and other manufacturers, and are still produced as excellent intermediate aperture lenses.

<span class="mw-page-title-main">Zorki</span>

Zorki is the name of a series of 35mm rangefinder cameras manufactured in the Soviet Union between 1948 and 1978.

<span class="mw-page-title-main">Rollei</span> German optical equipment manufacturer

Rollei was a German manufacturer of optical instruments founded in 1920 by Paul Franke and Reinhold Heidecke in Braunschweig, Lower Saxony, and maker of the Rolleiflex and Rolleicord series of cameras. Later products included specialty and nostalgic type films for the photo hobbyist market.

<span class="mw-page-title-main">Rolleiflex</span> Line of twin-lens and single-lens reflex cameras by Rollei

Rolleiflex is the name of a long-running and diverse line of high-end cameras originally made by the German company Franke & Heidecke, and later Rollei-Werke.

<span class="mw-page-title-main">Contax</span> Japanese camera brand

Contax began as a German camera model in the Zeiss Ikon line in 1932, and later became a brand name. The early cameras were among the finest in the world, typically featuring high quality Zeiss interchangeable lenses. The final products under the Contax name were a line of 35 mm, medium format, and digital cameras engineered and manufactured by Japanese multinational Kyocera, and featuring modern Zeiss optics. In 2005, Kyocera announced that it would no longer produce Contax cameras. The rights to the brand are currently part of Carl Zeiss AG, but no Contax cameras are currently in production, and the brand is considered dormant.

<span class="mw-page-title-main">Leica M3</span>

The Leica M3 is a 35 mm rangefinder camera by Ernst Leitz GmbH, introduced in 1954. It was a new starting point for Leitz, which until then had only produced screw-mount Leica cameras that were incremental improvements to its original Leica (Ur-Leica). The M3 introduced several features to the Leica, among them the combination of viewfinder and rangefinder in one bright window, like on the Contax II, a bayonet lens mount, and rapid film advance lever. It was the most successful model of the M series, with over 220,000 units sold by the time production of the M3 model ended in 1966.

<span class="mw-page-title-main">FED (camera)</span> Soviet camera brand and manufacturer

The FED is a Soviet rangefinder camera, mass-produced from 1934 until around 1996, and also the name of the factory that made it.

<span class="mw-page-title-main">Kodak Retina</span> Series of 35mm cameras

Retina was the brand-name of a long-running series of German-built Kodak 35mm cameras, produced from 1934 until 1969. Kodak Retina cameras were manufactured in Stuttgart-Wangen by the Kodak AG Dr. Nagel Werk which Kodak had acquired in December 1931.

<span class="mw-page-title-main">Konica Hexar RF</span> 35 mm rangefinder camera

The Konica Hexar RF is a 35 mm rangefinder camera which was sold by Konica. It was introduced to the market on 13 October 1999. and subsequently discontinued some time before the end of 2003. The camera used the "Bayonet Konica KM-mount", a copy of the Leica M-mount, thus sharing interchangeable lenses with those designed for Leica cameras and others compatible with them. The Hexar RF has a combined rangefinder/viewfinder modeled on that of Leica cameras, a similar body shape and size - and so is similar to Leica M-mount cameras in many aspects of operation.

<span class="mw-page-title-main">35 mm Bessa</span>

The Bessa family of cameras was manufactured in Japan by Cosina as a revival of the Voigtländer brand name between 1999 and 2015.

<span class="mw-page-title-main">Robot II</span> 135 film camera introduced in 1938

The Robot II was a mechanical 135 film camera by Robot introduced in 1938. It was a slightly larger camera than the Robot I, with some significant improvements but still using the basic mechanism. Among the standard objectives were 3 cm Zeiss Tessar and a 334 cm Zeiss Tessar in 1:2,8 and 1:3,5 variations, a 1:2,0/40 mm Zeiss Biotar and 1:4/7,5 cm Zeiss Sonnar.

<span class="mw-page-title-main">Tenax I</span>

The Tenax I is a 24x24 mm fixed lens camera by Zeiss Ikon launched in 1939.

<span class="mw-page-title-main">Leica M5</span>

The Leica M5 is a 35 mm camera by Leica Camera AG, introduced in 1971. It was the first Leica rangefinder camera to feature through-the-lens (TTL) metering and the last to be made entirely in Wetzlar by hand using the traditional "adjust and fit" method.

<span class="mw-page-title-main">Contax I</span>

The Contax I, or Original Contax, is a 35 mm rangefinder camera made between 1932 and 1936 by Zeiss Ikon. The Contax I had six identifiable variants, but fundamentally identical; every aspect was designed to outperform the Leica. For instance, the removable back was for faster loading and reloading, the bayonet lens mount was designed for rapid lens interchangeability, the long-base rangefinder allowed more accurate focusing, and the vertical metal shutter not only gave a faster maximum speed but also banished the problem of shutter blinds burning.

<span class="mw-page-title-main">Tenax II</span>

During the 1930s, Zeiss Ikon (ZI) made a wide range of miniature cameras for the 35mm film format. Most cameras used the standard 24×36 mm frame size, like the Contax, Nettax and Super Nettel. However, the ability to take images in fast sequence was a popular marketing element at the time, and several fast-operating models were made. Among these were the Otto Berning's motor-driven Robot cameras as well as the ZI lever-operated Tenax I and Tenax II. These have the smaller square format of 24×24 mm, enhancing faster frame advance.

References

  1. http://www.vintagephoto.tv/patents.shtml See "Heinz Kilfitt - Photographic Camera, 1936 (Robot Camera)" on this page for Kilfitt's US patent of "a photographic camera in which the feed of the film is effected automatically by a spring mechanism"