Retina was the brand-name of a long-running series of German-built Kodak 35mm cameras, produced from 1934 until 1969. Kodak Retina cameras were manufactured in Stuttgart-Wangen by the Kodak AG Dr. Nagel Werk which Kodak had acquired in December 1931.
The Retina line included a variety of folding and non-folding models, including the Retina Reflex single lens reflex camera. Retina cameras were noted for their compact size, high quality, and low cost compared to competitors. These cameras retain a strong following today, of both photographers and collectors.
Kodak AG also offered a companion line of less-expensive Retinette cameras, with similar looks and function.
August Nagel was a prolific camera designer and entrepreneur who was one of the founders of Zeiss Ikon, when he merged his company, Contessa-Nettel AG, with Zeiss and others to form that group in 1919. As well as being an owner he was an active designer of fine Zeiss cameras including miniatures. He left Zeiss in 1928 to form his own firm Nagel Camera Werks AG, and produced the Nagel line of cameras, including glass plate, sheet-film, and roll-film cameras. Some of his notable designs are the: Vollenda, Duo-620, Pupille, Ranca, and Recomar cameras.
After selling Dr. August Nagel – Fabrik fuer Feinmechanik Werk in Stuttgart-Wangen to Kodak AG in December 1931, the new firm was designated "Kodak AG – Dr. Nagel Werk". Nagel continued to innovate including developing the Retina folding cameras around the new Kodak 135 preloaded 35mm film cartridge. Prior to this, most 35mm film was loaded by the user into proprietary cartridges in a darkroom or light-tight bag.
In the early 1930s August Nagel was developing a 35mm camera and a preloaded disposable 35mm film cartridge, which would also fit in Leica and Contax cameras. Nagel was an expert in miniature cameras; his Vollenda miniature folder, along with the Ranca and Pupille collapsible cameras were smaller than the Leica and Contax cameras, but could use 50mm f:3.5 Elmar and other similar Tessar formula lenses in Compur shutters to create a larger 30mm x 40mm image on 127 rollfilm. The advantage of 35mm would be the elimination of the paper-backer allowing more images per roll of film.
All of the Kodak Retina cameras from the mid 1930s to the late 1950s were folding cameras with a short self-erecting bellows, lens board, and folding metal door/cover. These folding Kodak Retina cameras are listed below with their respective years of manufacture. While the previous photohistorical literature gave both a pre-war 3-digit "Type" code for each Retina and Retinette model and a post-war 3 digit "Type" code for each Retina or Retinette model, recent research indicates that the term "Type" can only be found for the post-war Retina and Retinette cameras in the contemporary Kodak AG documents. In the pre-war times, a number ( nummer, Nr.) code was used for all Kodak AG cameras, not just the Retina and Retinette models. So, in the interest of historical accuracy, pre-war Retina and Retinette cameras have a "Nr." code and post-war Retina and Retinette cameras have a "Type" code.
Class | 1930s | 1940s | 1950s | 1960 | |||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
4 | 5 | 6 | 7 | 8 | 9 | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | ||
Retina I (viewfinder only) | Retina Nr. 117 | Retina (I) Nr. 119 | Retina I Nr. 148 & 149 | Retina I Type 010 (early) | Retina I Type 013 | Retina Ia Type 015 | Retina IB Type 019 Ausf. I | ||||||||||||||||||||
Retina Nr. 118 | Retina I Nr. 141 | Retina I Nr. 167 | Retina I Type 010 | Retina Ib Type 018 | Retina IB Type 019 Aust. II | ||||||||||||||||||||||
Retina (I) Nr. 126 | Retina I Nr. 143 | ||||||||||||||||||||||||||
Retina II (rangefinder) | Retina II Nr. 122 | Retina IIa Nr. 150 | Retina II Type 011 | Retina IIa Type 016 | Retina IIC Type 029 | ||||||||||||||||||||||
Retina II Nr. 142 | Retina II Type 014 | Retina IIc Type 020 | |||||||||||||||||||||||||
Retina III (rangefinder & exposure meter) | Retina IIIc Type 021 Ausf. I | ||||||||||||||||||||||||||
Retina IIIc Type 021 Ausf. II | |||||||||||||||||||||||||||
Retina IIIC Type 028 |
The first Retina, Nr. 117, was introduced in late July 1934. The successive model: Nr 118 Retina followed in 1935 with minor modifications to the Nr. 117. The Nr. 119 Retina (I) and the more expensive Nr. 126 Retina (I) follow in 1936. Nr. 117, Nr. 118 and Nr. 119 Retina cameras all had black lacquered top housings, black lacquered body edges and nickel-plated control surfaces. Nr. 126 Retina (I) was the first with a chrome-plated finish to the top housing, chrome-plated top deck below the rewind knob and chrome-plated control surfaces with the body edges being polished aluminum alloy with a clear lacquer coat. Nr. 122 Retina II was introduced in 1936 with a separate coupled rangefinder and viewfinder and at this point, Nr. 119 and Nr. 126 Retina cameras were designated as "Retina I" cameras. The Nr. 122 Retina II had a problematic film advance lever and was replaced in June 1937 by the Nr. 142 Retina II with a return to the knob advance. Nr. 141 Retina I is a chrome finished model with a shutter release on the top body which was introduced in late 1937. Nr. 143 Retina I was the black lacquer/nickel-plated version of the Nr. 141 Retina I introduced in early 1938. The identification of Retina I cameras is based on the finish and configuration of the top housings of each camera and should NOT be based on lens/shutter or serial number, as lenses, shutters and back doors can be easily interchanged by repairman. In 1939 a Nr. 150 Retina IIa was introduced to replace the Nr. 142 Retina II, but it was unrelated to the flash capable Type 016 Retina IIa series of the early 1950s. Also in 1939, the Nr. 148 Retina I and the Nr. 149 Retina I with double exposure prevention are introduced. Late versions of the Type 148 Retina I have a black lacquer finish to the body edges. The last pre-war Retina I is the Nr. 167 Retina I which was manufactured in July 1941 and was for export only.
These lens/shutter combinations were available on the following pre-war Kodak Retina cameras:
In January 1951 the Type 015Retina Ia and Type 016Retina IIa Type 016 are introduced with COMPUR-RAPID flash synch. shutters. Synchro-Compur shutters with MX flash synch shutters are introduced on the Type 016 Retina IIa in early spring of 1951 and on the Type 015 Retina Ia in June 1951. Production of these two camera continues until spring of 1954.
The Type 018Retina Ib, Type 020Retina IIc and Type 021 Ausf I.Retina IIIc are introduced in the spring of 1954 at Photokina in Cologne, Germany. Both the Retina IIc and Retina IIIc were equipped with convertible lenses; the front lens elements were interchangeable to create f:5,6 35mm and f:4 80mm lenses; however, the cameras could not be folded closed with the accessory lenses. Both Retina-Xenon C orRetina-Heligon C lenses were offered on the Type 020 and Type 021 Ausf I. Type 021 Ausf II Retina IIIc was introduced in summer of 1957 with a single range exposure meter. Type 019 Ausf. I Retina IB was also introduced at this time.
The fifth and final generation of folding Retina cameras (with capital-letter B or C suffix) was introduced in 1957, the same year as the Type 025 Retina Reflex system. These last Retina folders included the Type 019 Ausf IIRetina IB, Type 029Retina IIC, and Type 028 Retina IIIC. This group had slightly taller top housings, with upgraded single range exposure meters and the addition of a larger, bright-line viewfinder. The fixed-lens Type 019 Ausf I / Ausf II Retina IB featured an exposure meter, which was not included on the Type 018 Retina Ib. The Type 029 Retina IIC had a rangefinder but no meter though it was also taller housing than the Retina IIc; it was of limited production from 1957 to 1958 and not imported to the United States by Eastman Kodak Co.
These lens/shutter combinations were available on the following postwar folding Retina I Models:
These lens/shutter combinations were available on the following postwar folding Retina II Models:
These lens/shutter combinations were available on the following postwar folding Retina III Models:
The Retina Reflex SLR camera systems were introduced in 1957 and produced in several iterations to 1966. The first model, Type 025 Retina Reflex, shared the "C" series interchangeable front element lenses with the interchangeable Type 020 Retina IIc and Type 021 Ausf I Retina IIIc (35mm, 50mm, and 80mm). Type 025 Retina Reflex had the same uncoupled single range exposure meter of the Type 019 Ausf I Retina IB and the Type 021 Ausf. II Retina IIc, which is later mounted on the Type 019 Ausf. II Retina IB and Type 028 Retina IIIC.
The second generation Type 034 Retina Reflex S of 1959 shared "S" type lenses with the Type 027 Retina IIIS (below), and offered fully coupled metering. With these the entire lens detached allowing for a wider range of focal lengths, 28mm to 200mm. At this point economical Japanese SLRs were becoming available and the Nikon F of 1959 would set the standard for future camera system.
The Reflex III of 1961 and Reflex IV of 1964 brought minor improvements with the former offering a metering needle visible in the finder, and the latter allowing shutter and aperture settings to be visible in the finder. The Reflex IV was produced until 1967. From 1968 to 1974 Kodak AG produced an Instamatic Reflex (SLR) based on the Retina Reflex, accepting the S series lenses, but using instamatic 126 film cartridges and instamatic style flash cubes.
Mount | 1950s | 1960s | 1970s | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
7 | 8 | 9 | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | 1 | 2 | 3 | 4 | |
Convertible | Retina Reflex Type 025 | |||||||||||||||||
DKL-mount | Retina Reflex S Type 034 | Retina Reflex IV Type 051 | Instamatic Reflex | |||||||||||||||
Retina Reflex III Type 041 |
Kodak produced a series of non-folding (rangefinder and viewfinder) cameras under the Retina label between 1958 and 1966. The initial models were very similar to the last folding Retinas, 5th generation (capital letters series). The IIIS Type 27 had interchangeable lenses; however these used the S-Type series lenses of the Retina later Reflex SLRs rather than the more limited C series used by the later folders. The IIS was slightly smaller (Retinette frame) with similar features but did not have interchangeable lenses.
Several models of "Automatic" Retinas followed, on the IIS frame, without interchangeable lenses, but with coupled (automatic)metering, where in auto-mode the meter adjusted the aperture. The Automatic II and Automatic III had an upgraded lens and shutter from the Automatic I. The Automatic I and Automatic II did not have a rangefinder, but the Automatic III had a coupled rangefinder.
The last cameras labeled as Retinas were the plastic-bodied viewfinder Type 060 Retina S1 and Type 061 Retina S2, produced from 1966 to 1969. These were reasonable amateur cameras but not of the quality of prior Retina cameras. The fixed lens/shutters are adjustable for speed, aperture, and focus. Neither offers a rangefinder, though the S2 offers coupled metering.
Mount | 1950s | 1960s | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
8 | 9 | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | |
DKL-mount | Retina IIIS Type 027 | |||||||||||
Fixed lens | Retina IIS Type 024 | Retina I BS Type 040 | ||||||||||
Retina Automatic I Type 038 | Retina IF Type 046 | Retina S1 Type 060 | ||||||||||
Retina Automatic II Type 032 | Retina IIF Type 047 | Retina S2 Type 061 | ||||||||||
Retina Automatic III Type 039 |
Kodak also manufactured the Retinette series of lesser-featured cameras from 1939 to 1960 in a variety of folding and rigid models.
A folding camera is a camera type. Folding cameras fold into a compact and rugged package for storage. The lens and shutter are attached to a lens-board which is connected to the body of the camera by a light-tight folding bellows. When the camera is fully unfolded it provides the correct focus distance from the film. The key advantage of folding cameras is their excellent physical-size to film-size ratio when the camera is folded for storage.
A rangefinder camera is a camera fitted with a rangefinder, typically a split-image rangefinder: a range-finding focusing mechanism allowing the photographer to measure the subject distance and take photographs that are in sharp focus. Most varieties of rangefinder show two images of the same subject, one of which moves when a calibrated wheel is turned; when the two images coincide and fuse into one, the distance can be read off the wheel. Older, non-coupled rangefinder cameras display the focusing distance and require the photographer to transfer the value to the lens focus ring; cameras without built-in rangefinders could have an external rangefinder fitted into the accessory shoe. Earlier cameras of this type had separate viewfinder and rangefinder windows; later the rangefinder was incorporated into the viewfinder. More modern designs have rangefinders coupled to the focusing mechanism so that the lens is focused correctly when the rangefinder images fuse; compare with the focusing screen in non-autofocus SLRs.
Robot was a German imaging company known originally for clockwork cameras, later producing surveillance (Traffipax) and bank security cameras. Originally created in 1934 as a brand of Otto Berning, it became part of the Jenoptik group of optical companies in 1999, and specializes in traffic surveillance today.
In photography, flash synchronization or flash sync is the synchronizing the firing of a photographic flash with the opening of the shutter admitting light to photographic film or electronic image sensor.
The Instamatic is a series of inexpensive, easy-to-load 126 and 110 cameras made by Kodak beginning in 1963. The Instamatic was immensely successful, introducing a generation to low-cost photography and spawning numerous imitators.
The Tessar is a photographic lens design conceived by the German physicist Paul Rudolph in 1902 while he worked at the Zeiss optical company and patented by Zeiss in Germany; the lens type is usually known as the Zeiss Tessar.
Graflex was a manufacturer that gave its brand name to several models of camera.
Schneider Kreuznach is the abbreviated name of the company Jos. Schneider Optische Werke GmbH, which is sometimes also simply referred to as Schneider. They are a manufacturer of industrial and photographic optics. The company was founded on 18 January 1913 by Joseph Schneider as Optische Anstalt Jos. Schneider & Co. at Bad Kreuznach in Germany. The company changed its name to Jos. Schneider & Co., Optische Werke, Kreuznach in 1922, and to the current Jos. Schneider Optische Werke GmbH in 1998.
The double Gauss lens is a compound lens used mostly in camera lenses that reduces optical aberrations over a large focal plane.
Edixa is a brand of camera manufacturer Wirgin Kamerawerk which was based in Wiesbaden, West Germany. The product line included several 35mm cameras and 16mm Edixa 16 subminiature cameras designed by Heinz Waaske from the 1950s to the 1970s.
The Contaflex series is a family of 35mm leaf-shuttered SLR cameras, produced by Zeiss Ikon in the 1950s and 1960s. The name was first used in 1935 on a 35mm Twin-lens reflex camera, the Contaflex TLR also by Zeiss Ikon, the -flex part in the name referring to integral mirror for the viewfinder. The first models, the Contaflex I and II have fixed lenses, while the later models have interchangeable lenses, and eventually the Contaflexes became a camera system with a wide variety of accessories.
Heinz Waaske was a German camera designer, notably father of the Rollei 35.
Wirgin was a German company which is still known for its brands Wirgin and Edixa, and for its camera types like the Edina, the Edinex or the Gewirette. It was based in the Hessian capital Wiesbaden and made a line of quite inexpensive 35mm SLRs from the 1950s to the 1970s, including the Edixa Reflex and Edixa-Mat Reflex. Wirgin was West Germany's main producer of SLRs with focal plane shutter. It also produced some of the lenses for its cameras, among them several M42 screw mount lenses.
Kodak Retinette is the name of a classic series of cameras manufactured by the Eastman Kodak company. They were introduced in 1939 as a less expensive alternative to the Kodak Retina series. The first models were of the folding type using bellows and their lenses had three elements as compared to the four element Tessar lenses of the Retina series. The first non-folding (rigid) variant was introduced in 1954 with the model 022. They most often featured Schneider Kreuznach Reomar lenses but, sometimes, Rodenstock Reomar lenses were installed. The Rodenstock lenses were based on the original Schneider Kreuznach triplet design. Kodak Anastigmat Angénieux lenses were also used especially for the French market. Common shutters included Compur–Rapid as well as various Pronto, Vero and Kodak models.
The Kodak Signet series of 35mm cameras was Kodak's top American-made 35mm camera line of the 1950s, into the early 1960s. The designs were by Arthur H Crapsey. The first model was the Signet 35 made between February 1951 - March 1958.
The Kodak Retina Reflex is a discontinued series of four single-lens reflex cameras made by Kodak in Germany between 1957 and 1974, as part of the Kodak Retina line of 35mm film cameras.
H. Bellieni et Fils was a camera maker in Nancy, France, from the late nineteenth century until the early twentieth century. Several jumelle-type cameras, including stereo models, are known to have been produced from the mid-1890s to 1905; older, wooden-bodied cameras are also seen.
The Kodak 35 was introduced in 1938 as the first US manufactured 35mm camera from Eastman Kodak Company. It was developed in Rochester, New York when it became likely that imports from the Kodak AG factory in Germany could be disrupted by war.
Friedrich Deckel GmbH, also known as F.Deckel, was a German company founded by Friedrich Deckel and Christian Bruns in Munich as Bruns & Deckel in 1903. Its most famous product is the Compur line of leaf shutters used on many photographic lenses starting from 1911. Bruns and Deckel previously had worked together at C. A. Steinheil & Söhne; Bruns was an inventor responsible for developing leaf shutters while Deckel was a laboratory mechanic.
Rodenstock Photo Optics traces its origins to a mechanical workshop founded in 1877 by Josef Rodenstock and his brother Michael in Würzburg, Germany. The company relocated to Munich by 1884 and became an important manufacturer of both corrective lenses for glasses and camera lenses by the early 1900s. These two lines began to diverge in the 1960s as the center of photographic lens manufacturing shifted to Japan; the ophthalmic business continued as Rodenstock GmbH while the remaining camera lens business was repositioned to serve the large format and industrial precision optics markets, then spun off in 1996 as Rodenstock Präzisionsoptik. Since then, the precision optics brand has been acquired in succession by LINOS Photonics, Qioptiq Group, and Excelitas Technologies (2013).