Sciaky, Inc.

Last updated

Sciaky, Inc. is an American manufacturer of metal 3D printing systems and industrial welding systems, founded in 1939 and headquartered in Chicago, Illinois. It specializes in electron beam welding systems and services for aerospace manufacturers. [1]

Contents

In 2009, Sciaky entered the 3D Printing field with its electron beam additive manufacturing (EBAM) process for large metal parts and applications. [2] In 2011, this technology was selected to produce [3] titanium components for the F-35 Fighter Jet and, later, satellite propellant tanks. [4] Sciaky's EBAM systems became available for commercial purchase in September 2014. [5] Sciaky is a subsidiary of manufacturing and repair company Phillips Service Industries, Inc. [6] [7]

History

1930s

Sciaky Brothers, Inc. is founded in 1939. [7]

1940s

Sciaky is a key supplier of resistance welding systems [8] used to make warplanes for the U.S. military during World War II.

1950s

Sciaky produces its first Electron Beam (EB) welding system in 1957.

1960s

Sciaky becomes a major supplier of EB welding systems used to make F14 jets in 1969 [9]

1970s

DEC PDP and Data General Nova mini-computer based weld control systems

1980s

DG Eclipse mini-computer based MarkVII weld control system.

Acquired by Allegheny International in 1982.

Dual VME M68000 based W2000 weld control system.

Acquired by Ferranti International in 1988.

1990s

Phillips Service Industries, Inc. acquires Sciaky in 1994.

2000s

Sciaky begins research on a new manufacturing process called Electron Beam Free Form Fabrication (EBFFF) in 2000.

Single VME x86 board W20x0 weld control system

In 2007, Sciaky earns a contract with the National Aeronautics and Space Administration's (NASA) Langley Research Center [10] to create a new EB gun system in the U.S. incorporating the EBFFF system and tested on a microgravity research aircraft and in space. Engineers from NASA assisted in providing supporting hardware to the gun.

In 2009, Sciaky launches its Electron Beam Additive Manufacturing process as a service-only option.

2010s

In 2011, Sciaky was selected by the Department of Defense (DOD), for the Mentor-Protege Program by Lockheed Martin Aeronautics with the focus of this agreement being the additive manufacturing of titanium structural components for Lockheed Martin's F-35 aircraft program.

In 2012, Sciaky entered a partnership with Penn State University, [11] via DARPA (Defense Advanced Research Projects Agency) funding, to advance Direct Digital Manufacturing technology (DDM) with the goal of advancing and deploying DDM technology for highly engineered and critical metallic systems to the Department of Defense (DOD) and U.S. industry.

In 2014, Sciaky begins selling its EBAM systems [12] on the open market.

As of 2019, the company had four EBAM systems: EBAM 300, 300, 150, and 110. [7]

2020s

In 2020, Sciaky deposited more than 12,000 lbs. of titanium with its EBAM systems. [13]

Metal 3D printing system

The company’s EBAM process relies on a wire-based directed energy deposition (DED) process. The systems can print parts from 8 inches to 19 feet long and can deposit up to 25 lbs. of metal per hour. The system can be used with titanium, tantalum, tungsten, Inconel, niobium, copper-nickel, aluminum, molybdenum, zirconium alloy, and stainless steel. Sciaky’s EBAM system uses closed-loop real-time adaptive controls that self-adjusts the metal deposition. [13]

See also

Related Research Articles

<span class="mw-page-title-main">Airframe</span> Mechanical structure of an aircraft

The mechanical structure of an aircraft is known as the airframe. This structure is typically considered to include the fuselage, undercarriage, empennage and wings, and excludes the propulsion system.

Since the mid-20th century, electron-beam technology has provided the basis for a variety of novel and specialized applications in semiconductor manufacturing, microelectromechanical systems, nanoelectromechanical systems, and microscopy.

<span class="mw-page-title-main">3D printing</span> Additive process used to make a three-dimensional object

3D printing or additive manufacturing is the construction of a three-dimensional object from a CAD model or a digital 3D model. It can be done in a variety of processes in which material is deposited, joined or solidified under computer control, with the material being added together, typically layer by layer.

<span class="mw-page-title-main">Space manufacturing</span> Production of manufactured goods in an environment outside a planetary atmosphere

Space manufacturing or In-space manufacturing is the fabrication, assembly or integration of tangible goods beyond Earth's atmosphere, involving the transformation of raw or recycled materials into components, products, or infrastructure in space, where the manufacturing process is executed either by humans or automated systems by taking advantage of the unique characteristics of space. Synonyms of Space/In-space manufacturing are In-orbit manufacturing, Off-Earth manufacturing, Space-based manufacturing, Orbital manufacturing, In-situ manufacturing, In-space fabrication, In-space production, etc. In-space manufacturing is a part of the broader activity of in-space servicing, assembly and manufacturing (ISAM) and is related to in situ resource utilization (ISRU).

Electron-beam physical vapor deposition, or EBPVD, is a form of physical vapor deposition in which a target anode is bombarded with an electron beam given off by a charged tungsten filament under high vacuum. The electron beam causes atoms from the target to transform into the gaseous phase. These atoms then precipitate into solid form, coating everything in the vacuum chamber with a thin layer of the anode material.

<span class="mw-page-title-main">Cold spraying</span> Coating deposition method

Gas dynamic cold spraying or cold spraying (CS) is a coating deposition method. Solid powders are accelerated in a supersonic gas jet to velocities up to ca. 1200 m/s. During impact with the substrate, particles undergo plastic deformation and adhere to the surface. To achieve a uniform thickness the spraying nozzle is scanned along the substrate. Metals, polymers, ceramics, composite materials and nanocrystalline powders can be deposited using cold spraying. The kinetic energy of the particles, supplied by the expansion of the gas, is converted to plastic deformation energy during bonding. Unlike thermal spraying techniques, e.g., plasma spraying, arc spraying, flame spraying, or high velocity oxygen fuel (HVOF), the powders are not melted during the spraying process.

Electron-beam additive manufacturing, or electron-beam melting (EBM) is a type of additive manufacturing, or 3D printing, for metal parts. The raw material is placed under a vacuum and fused together from heating by an electron beam. This technique is distinct from selective laser sintering as the raw material fuses have completely melted. Selective Electron Beam Melting (SEBM) emerged as a powder bed-based additive manufacturing (AM) technology and was brought to market in 1997 by Arcam AB Corporation headquartered in Sweden.

<span class="mw-page-title-main">Rapid prototyping</span> Group of techniques to quickly construct physical objects

Rapid prototyping is a group of techniques used to quickly fabricate a scale model of a physical part or assembly using three-dimensional computer aided design (CAD) data. Construction of the part or assembly is usually done using 3D printing or "additive layer manufacturing" technology.

Electron-beam freeform fabrication (EBF3) is an additive manufacturing process that builds near-net-shape parts. It requires far less raw material and finish machining than traditional manufacturing methods. EBF3 is done in a vacuum chamber where an electron beam is focused on a constantly feeding source of metal, which is melted and applied as called for by a three-dimensional layered drawing - one layer at a time - on top of a rotating metallic substrate until the part is complete.

<span class="mw-page-title-main">Ultrasonic consolidation</span>

Ultrasonic Consolidation (UC) or Ultrasonic Additive Manufacturing (UAM) is a low temperature additive manufacturing or 3D printing technique for metals.

A niobium alloy is one in which the most common element is niobium.

William John Arbegast, Jr. was an American metallurgical engineer, mechanical engineer and friction stir welding expert.

<span class="mw-page-title-main">Selective laser melting</span> 3D printing technique

Selective laser melting (SLM) is one of many proprietary names for a metal additive manufacturing (AM) technology that uses a bed of powder with a source of heat to create metal parts. Also known as direct metal laser sintering (DMLS), the ASTM standard term is powder bed fusion (PBF). PBF is a rapid prototyping, 3D printing, or additive manufacturing technique designed to use a high power-density laser to melt and fuse metallic powders together.

<span class="mw-page-title-main">Powder bed and inkjet head 3D printing</span> 3D printing technique

Binder jet 3D printing, known variously as "Powder bed and inkjet" and "drop-on-powder" printing, is a rapid prototyping and additive manufacturing technology for making objects described by digital data such as a CAD file. Binder jetting is one of the seven categories of additive manufacturing processes according to ASTM and ISO.

Construction 3D Printing (c3Dp) or 3D construction Printing (3DCP) refers to various technologies that use 3D printing as a core method to fabricate buildings or construction components. Alternative terms for this process include "additive construction." "3D Concrete" refers to concrete extrusion technologies whereas Autonomous Robotic Construction System (ARCS), large-scale additive manufacturing (LSAM), and freeform construction (FC) refer to other sub-groups.

<span class="mw-page-title-main">Fused filament fabrication</span> 3D printing process

Fused filament fabrication (FFF), also known as fused deposition modeling, or filament freeform fabrication, is a 3D printing process that uses a continuous filament of a thermoplastic material. Filament is fed from a large spool through a moving, heated printer extruder head, and is deposited on the growing work. The print head is moved under computer control to define the printed shape. Usually the head moves in two dimensions to deposit one horizontal plane, or layer, at a time; the work or the print head is then moved vertically by a small amount to begin a new layer. The speed of the extruder head may also be controlled to stop and start deposition and form an interrupted plane without stringing or dribbling between sections. "Fused filament fabrication" was coined by the members of the RepRap project to give an acronym (FFF) that would be legally unconstrained in its use.

<span class="mw-page-title-main">Applications of 3D printing</span>

In recent years, 3D printing has developed significantly and can now perform crucial roles in many applications, with the most common applications being manufacturing, medicine, architecture, custom art and design, and can vary from fully functional to purely aesthetic applications.

<span class="mw-page-title-main">3D printing processes</span> List of 3D printing processes

A variety of processes, equipment, and materials are used in the production of a three-dimensional object via additive manufacturing. 3D printing is also known as additive manufacturing, because the numerous available 3D printing process tend to be additive in nature, with a few key differences in the technologies and the materials used in this process.

Cold spray additive manufacturing (CSAM) is a particular application of cold spraying, able to fabricate freestanding parts or to build features on existing components. During the process, fine powder particles are accelerated in a high-velocity compressed gas stream, and upon the impact on a substrate or backing plate, deform and bond together creating a layer. Moving the nozzle over a substrate repeatedly, a deposit is building up layer-by-layer, to form a part or component. If an industrial robot or computer controlled manipulator controls the spray gun movements, complex shapes can be created. To achieve a 3D shape, there are two different approaches. First, to fix the substrate and move the cold spray gun/nozzle using a robotic arm; the second one is to move the substrate with a robotic arm, and keep the spray-gun nozzle fixed. There is also a possibility to combine these two approaches either using two robotic arms or other manipulators. The process always requires a substrate and uses only powder as raw material.

Research on the health and safety hazards of 3D printing is new and in development due to the recent proliferation of 3D printing devices. In 2017, the European Agency for Safety and Health at Work has published a discussion paper on the processes and materials involved in 3D printing, potential implications of this technology for occupational safety and health and avenues for controlling potential hazards.

References

  1. ↑ "Standardizing the Art of Electron-Beam Welding" Archived 2016-12-21 at the Wayback Machine Lawrence Livermore National Laboratory. Retrieved 10 June 2015.
  2. ↑ "Electron Beam Additive Manufacturing Technology" Sciaky, Inc. Retrieved 24 May 2015.
  3. ↑ "Lockheed Martin And Sciaky, Inc. Enter Mentor-Protégé Agreement With Initial Focus On Electron Beam Manufacturing Of F-35 Parts" Retrieved 3 September 2014. Lockheed Martin.
  4. ↑ "Lockheed Leaning on 3-D Printing To Bring Tank Work In-house" Space News. Retrieved 10 June 2015
  5. ↑ Thryft, Ann. "Video: Sciaky to Sell Its Huge Metals 3D Printers" Design News. Retrieved 3 September 2014.
  6. ↑ "Sciaky announces increased demand for its DED Additive Manufacturing solutions". Metal Additive Manufacturing. 2020-07-07. Retrieved 2021-04-15.
  7. 1 2 3 "Sciaky Inc. joins ADAPT to develop metal 3D printing". 3D Printing Industry. 2019-03-13. Retrieved 2021-04-15.
  8. ↑ "Welding Timeline Years 1900-1950" A History of Welding. Retrieved 10 June 2015
  9. ↑ "EB Welding the F-14". Welding Journal. Retrieved 10 June 2015
  10. ↑ "Sciaky Earns NASA Contract for Electron Beam Gun System" Welding Journal. Retrieved 10 June 2015.
  11. ↑ McNally, David. "DARPA seeks advanced manufacturing standards", 10 July 2014. Retrieved 3 September 2014.
  12. ↑ "Sciaky Inc. to Introduce EBAM Machines to the Market by September" Engineering.com.
  13. 1 2 "Sciaky's EBAM® Metal 3D Printing Solution deposited over 12,000 pounds of Titanium in 2020". MANUFACTUR3D. 2021-02-09. Retrieved 2021-04-15.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.