Single-subject research

Last updated

Single-subject research is a group of research methods that are used extensively in the experimental analysis of behavior and applied behavior analysis with both human and non-human participants. This research strategy focuses on one participant and tracks their progress in the research topic over a period of time. Single-subject research allows researchers to track changes in an individual over a large stretch of time instead of observing different people at different stages. This type of research can provide critical data in several fields, specifically psychology. It is most commonly used in experimental and applied analysis of behaviors. This research has been heavily debated over the years. Some believe that this research method is not effective at all while others praise the data that can be collected from it. Principal methods in this type of research are: A-B-A-B designs, Multi-element designs, Multiple Baseline designs, Repeated acquisition designs, Brief experimental designs and Combined designs. [1]

Contents

These methods form the heart of the data collection and analytic code of behavior analysis. Behavior analysis is data driven, inductive, and disinclined to hypothetico-deductive methods. [2]

Experimental questions

Experimental questions are decisive in determining the nature of the experimental design to be selected. There are four basic types of experimental questions: demonstration, comparison, parametric, and component. [3] A demonstration is "Does A cause or influence B?". A comparison is "Does A1 or A2 cause or influence B more?". A parametric question is "How much of A will cause how much change or influence on B?". A component question is "Which part of A{1,2,3} - A1 or A2 or A3... - causes or influences B?" where A is composed of parts that can be separated and tested. [3]

The A-B-A-B design is useful for demonstration questions.

A-B-A-B

A-B-A-B

A-B-A-B designs begin with establishing a baseline (A #1) then introduce a new behavior or treatment (B #1). Then there is a return to the baseline (A #2) by removing B #1. B #2 is a return of the new behavior or treatment.

A-B

An AB design is a two-part or phase design composed of a baseline ("A" phase) with no changes and a treatment or intervention ("B") phase. [4] [5] If there is a change then the treatment may be said to have had an effect. However, it is subject to many possible competing hypotheses, making strong conclusions difficult. Variants on the AB design introduce ways to control for the competing hypotheses to allow for stronger conclusions.

Reversal or A-B-A

The reversal design is the most powerful of the single-subject research designs showing a strong reversal from baseline ("A") to treatment ("B") and back again. If the variable returns to baseline measure without a treatment then resumes its effects when reapplied, the researcher can have greater confidence in the efficacy of that treatment. However, many interventions cannot be reversed, some for ethical reasons (e.g., involving self-injurious behavior, smoking) and some for practical reasons (they cannot be unlearned, like a skill). [6]

Further ethics notes: It may be unethical to end an experiment on a baseline measure if the treatment is self-sustaining and highly beneficial and/or related to health. Control condition participants may also deserve the benefits of research once all data has been collected. It is a researcher's ethical duty to maximize benefits and to ensure that all participants have access to those benefits when possible.

A-B-C

The A-B-C design is a variant that allows for the extension of research questions around component, parametric and comparative questions. [7]

Multielement

Multi-element designs sometimes referred to as alternating-treatment designs are used in order to ascertain the comparative effect of two treatments. [8] Two treatments are alternated in rapid succession and correlated changes are plotted on a graph to facilitate comparison. [9] Multi-element designs are typically used in Single-subject research to accurately test multiple independent variables at once.

Multiple baseline

The multiple baseline design was first reported in 1960 as used in basic operant research. It was applied in the late 1960s to human experiments in response to practical and ethical issues that arose in withdrawing apparently successful treatments from human subjects. [10] In it two or more (often three) behaviors, people or settings are plotted in a staggered graph where a change is made to one, but not the other two, and then to the second, but not the third behavior, person or setting. Differential changes that occur to each behavior, person or in each setting help to strengthen what is essentially an AB design with its problematic competing hypotheses.[ citation needed ]

Multiple baseline tests are used to determine the helpfulness of an intervention. By focusing daily data collection on one participant, researchers can prepare to expand their research. This research method yields a high amount of data that can be analyzed by researchers. This data can then be used to support a researchers hypothesis and/or give insight before moving on to a group research project.

Repeated Acquisition

In addition to multiple baseline designs, a way to deal with problematic reversibility is the use of repeated acquisitions. [11]

Brief

A designed favored by applied settings researchers where logistical challenges, time and other limits make research difficult are variants of multi-element and A-B-A-B type designs. [12] [13]

Combined

Combined Single-subject research is used to gain added knowledge on the research question and are used to make group research run better. The combined design has arisen from a need to obtain answers to more complex research questions. Combining two or more single-case designs, such as A-B-A-B and multiple baseline, may produce such answers. [14]

Multipleprobe

Popular in Verbal Behavior research, the multipleprobe research design has elements of the other research designs.[ citation needed ]

Changing-Criterion

In a changing-criterion research design a criterion for reinforcement is changed across the experiment to demonstrate a functional relation between the reinforcement and the behavior. [15]

See also

Related Research Articles

Analysis of variance (ANOVA) is a collection of statistical models and their associated estimation procedures used to analyze the differences among means. ANOVA was developed by the statistician Ronald Fisher. ANOVA is based on the law of total variance, where the observed variance in a particular variable is partitioned into components attributable to different sources of variation. In its simplest form, ANOVA provides a statistical test of whether two or more population means are equal, and therefore generalizes the t-test beyond two means. In other words, the ANOVA is used to test the difference between two or more means.

<span class="mw-page-title-main">Design of experiments</span> Design of tasks

The design of experiments, also known as experiment design or experimental design, is the design of any task that aims to describe and explain the variation of information under conditions that are hypothesized to reflect the variation. The term is generally associated with experiments in which the design introduces conditions that directly affect the variation, but may also refer to the design of quasi-experiments, in which natural conditions that influence the variation are selected for observation.

<span class="mw-page-title-main">Randomized controlled trial</span> Form of scientific experiment

A randomized controlled trial is a form of scientific experiment used to control factors not under direct experimental control. Examples of RCTs are clinical trials that compare the effects of drugs, surgical techniques, medical devices, diagnostic procedures or other medical treatments.

Experimental psychology refers to work done by those who apply experimental methods to psychological study and the underlying processes. Experimental psychologists employ human participants and animal subjects to study a great many topics, including sensation, perception, memory, cognition, learning, motivation, emotion; developmental processes, social psychology, and the neural substrates of all of these.

Educational research refers to the systematic collection and analysis of data related to the field of education. Research may involve a variety of methods and various aspects of education including student learning, interaction, teaching methods, teacher training, and classroom dynamics.

<span class="mw-page-title-main">Field experiment</span>

Field experiments are experiments carried out outside of laboratory settings.

Applied behavior analysis (ABA), also called behavioral engineering, is a psychological intervention that applies approaches based upon the principles of respondent and operant conditioning to change behavior of social significance. It is the applied form of behavior analysis; the other two forms are radical behaviorism and the experimental analysis of behavior.

<span class="mw-page-title-main">Research design</span> Overall strategy utilized to carry out research

Research design refers to the overall strategy utilized to carry out research that defines a succinct and logical plan to tackle established research question(s) through the collection, interpretation, analysis, and discussion of data.

<span class="mw-page-title-main">Quasi-experiment</span> Empirical interventional study

A quasi-experiment is an empirical interventional study used to estimate the causal impact of an intervention on target population without random assignment. Quasi-experimental research shares similarities with the traditional experimental design or randomized controlled trial, but it specifically lacks the element of random assignment to treatment or control. Instead, quasi-experimental designs typically allow the researcher to control the assignment to the treatment condition, but using some criterion other than random assignment.

Event-related functional magnetic resonance imaging (efMRI) is a technique used in magnetic resonance imaging of medical patients.

In design of experiments, single-subject curriculum or single-case research design is a research design most often used in applied fields of psychology, education, and human behaviour in which the subject serves as his/her own control, rather than using another individual/group. Researchers use single-subject design because these designs are sensitive to individual organism differences vs group designs which are sensitive to averages of groups. The logic behind single subject designs is 1) Prediction, 2) Verification, and 3) Replication. The baseline data predicts behaviour by affirming the consequent. Verification refers to demonstrating that the baseline responding would have continued had no intervention been implemented. Replication occurs when a previously observed behaviour changed is reproduced. There can be large numbers of subjects in a research study using single-subject design, however—because the subject serves as their own control, this is still a single-subject design. These designs are used primarily to evaluate the effect of a variety of interventions in applied research.

Impact evaluation assesses the changes that can be attributed to a particular intervention, such as a project, program or policy, both the intended ones, as well as ideally the unintended ones. In contrast to outcome monitoring, which examines whether targets have been achieved, impact evaluation is structured to answer the question: how would outcomes such as participants' well-being have changed if the intervention had not been undertaken? This involves counterfactual analysis, that is, "a comparison between what actually happened and what would have happened in the absence of the intervention." Impact evaluations seek to answer cause-and-effect questions. In other words, they look for the changes in outcome that are directly attributable to a program.

Repeated measures design is a research design that involves multiple measures of the same variable taken on the same or matched subjects either under different conditions or over two or more time periods. For instance, repeated measurements are collected in a longitudinal study in which change over time is assessed.

Donald M. Baer was an American psychologist who contributed to the science of applied behavior analysis and pioneered the development of behavior analysis at the University of Kansas and the University of Washington. Baer is best known for his contributions at the University of Kansas. Throughout his career, he published over two hundred articles, books, and chapters on various psychological issues. Some of his most noteworthy contributions include literature on behavior-analytic theory, experimental design, and early childhood interventions. Baer received numerous awards during his lifetime which acknowledged his innovation and dedication to his field of research.

Clinical trials are medical research studies conducted on human subjects. The human subjects are assigned to one or more interventions, and the investigators evaluate the effects of those interventions. The progress and results of clinical trials are analyzed statistically.

An N of 1 trial (N=1) is a clinical trial in which a single patient is the entire trial, a single case study. A trial in which random allocation can be used to determine the order in which an experimental and a control intervention are given to a patient is an N of 1 randomized controlled trial. The order of experimental and control interventions can also be fixed by the researcher.

A multiple baseline design is used in medical, psychological, and biological research. The multiple baseline design was first reported in 1960 as used in basic operant research. It was applied in the late 1960s to human experiments in response to practical and ethical issues that arose in withdrawing apparently successful treatments from human subjects. In it two or more behaviors, people or settings are plotted in a staggered graph where a change is made to one, but not the other two, and then to the second, but not the third behavior, person or setting. Differential changes that occur to each behavior, person or in each setting help to strengthen what is essentially an AB design with its problematic competing hypotheses.

One application of multilevel modeling (MLM) is the analysis of repeated measures data. Multilevel modeling for repeated measures data is most often discussed in the context of modeling change over time ; however, it may also be used for repeated measures data in which time is not a factor.

A consecutive controlled case series (CCCS) is a clinical study that involves aggregating multiple cases consecutively encountered wherein an experimentally controlled single-case experimental design was employed with each case. The CCCS design differs from the consecutive case series, because the latter reports on multiple cases where experimental control was not demonstrated, usually because a pre-post non experimental design was used. In contrast, a CCCS includes only cases where the intervention was evaluated using single-case experimental designs, such as a reversal design, where experimental control is demonstrated through the replication of treatment effects for each individual participant. Thus, the CCCS design has better internal validity than a consecutive case series. The CCCS design also address some concerns about the external validity or generality of findings of small-n single-case experimental design studies because it explicitly includes all cases encountered, regardless of outcome. By including all cases, any bias favoring a particular outcome in controlled for, resulting in stronger external validity relative to studies describing fewer cases that were not consecutively encountered. Moreover, when a large number of individuals are included in the series, this provides opportunities to identify variables that may predict treatment outcomes. Consecutive controlled case-series studies examining behavior analytic interventions of late have examined functional communication training. schedule thinning during functional communication training, and functional analysis and treatment using caregivers.

References

  1. ↑ Kennedy, 2005.
  2. ↑ Chiese, Mecca. (2004). Radical Behaviorism: The Philosophy and the Science.
  3. 1 2 Kennedy, 2005, pp 65-66.
  4. ↑ "Introduction to Single Subject Designs: AB (Baseline And Intervention) Design". www.msu.edu, 2000. Archived July 31, 2001, at the Wayback Machine
  5. ↑ Kennedy, 2005, p. 124.
  6. ↑ Kazdin, Alan (1982). Single-Case Research Designs . New York: Oxford University Press. ISBN   0-19-503021-4.
  7. ↑ Kennedy, 2005, p. 132
  8. ↑ Kennedy, 2005, p. 137
  9. ↑ Cooper, J.O.; Heron, T.E.; Heward, W.L. (2007). Applied Behavior Analysis (2nd ed.). Prentice Hall. ISBN   978-0-13-142113-4.
  10. ↑ Hersen, Michael & Barlow, David H. (1976) Single-case Experimental Designs: Strategies for Studying Behavioral Change. Pergamon, New York. ISBN   978-0205474554
  11. ↑ Boren, J. J. (1963). "Repeated acquisition of new behavioral chains". American Psychologist, 18, p. 421.
  12. ↑ Kennedy, 2005, p. 169
  13. ↑ Cooper, Wacker, Sasso, Reimers, and Dunn (1990) "Using Parents as therapists to evaluate appropriate behavior of their children: application to a tertiary diagnostic clinic". Journal of Applied Behavior Analysis, 23, pp. 285-296.
  14. ↑ Baer, Wolf, Risley (1968) "Some still current dimensions of applied behavior analysis". Journal of Applied Behavior Analysis, 1, 91-97.
  15. ↑ Dixon, M.R.; Falcomata, T.S. (2004). "Preference for progressive delays and concurrent physical therapy exercise in an adult with acquired brain injury". Journal of Applied Behavior Analysis. 37 (1): 101–105. doi:10.1901/jaba.2004.37-101. PMC   1284485 . PMID   15154223.

Sources

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.