Skoda (barquentine)

Last updated

Skoda was a barquentine built in Kingsport, Nova Scotia in 1893 by shipbuilder Ebenezer Cox, marking the end of an era as the last vessel built by Cox and the last large vessel built in Kingsport.

Contents

Background

Skoda, a 658-ton barquentine, was built in Kingsport, Nova Scotia, designed by veteran master shipbuilder Ebenezer Cox. The barquentine marked the end of his thirty-year shipbuilding career, and was also the last deep sea vessel built and launched in Kingsport, bringing the shipbuilding era to a close at a yard that built some of the largest sailing ships in Canada. [1]

Skoda was commissioned for C. Rufus Burgess of Wolfville, Nova Scotia, who was the largest builder and owner of ships in the area. [2] The vessel was named a patent medicine factory in Wolfville, also owned by Burgess. Skoda was launched on June 1, 1893. She loaded lumber at nearby Parrsboro after the launch for a maiden voaye to the west of England. [3]

Shipbuilder

In his time, Ebenezer Thomas Cox (b. 19 Dec 1828, d. 8 Sept 1916 [4] ) was one of the leading shipbuilders. He spent thirty years as designer and master builder at the shipyard in Kingsport. He built thirty ships during this span, with his ships averaging at 1,000 tons each. Cox died in Kingsport, Nova Scotia in 1916 at the age of eighty-eight years. [2]

Later Use

Burgess owned the barquentine until 1900 when the Barquentine Skoda Company, Limited [1] of Wolfville, Nova Scotia took ownership. In 1912, the Skoda was sold to Lester Ashley Rodden of Mobile, Alabama and was registered at that port in 1915. [2]

Related Research Articles

Minas Basin

The Minas Basin is an inlet of the Bay of Fundy and a sub-basin of the Fundy Basin located in Nova Scotia, Canada. It is known for its extremely high tides.

Skoda or Škoda may refer to:

William H. Webb

William Henry Webb was a 19th-century New York City shipbuilder and philanthropist, who has been called America's first true naval architect.

Ezra Churchill

Ezra Churchill : Nineteenth-century industrialist, investing in shipbuilding, land, timber for domestic and foreign markets, gypsum quarries, insurance companies, hotels, etc. As a politician he held positions in the Nova Scotia legislature and was appointed a Canadian Senator for the Province of Nova Scotia. Churchill was also a Baptist lay preacher.

MV <i>Kipawo</i>

MV Kipawo is a historic Canadian passenger and freight ferry built to operate in the Bay of Fundy and which later served in Newfoundland and inspired the creation of a theater company. It was the 33rd and last ferry to provide service across Minas Passage, service which had been provided since the Acadian era.

<i>William D. Lawrence</i> (ship)

William D. Lawrence was a full-rigged sailing ship built in Maitland, Nova Scotia, along the Minas Basin and named after her builder, the merchant and politician William Dawson Lawrence (1817–1886).

Green Shipbuilders were based in Bristol, England, during the 19th century, constructing wooden sailing ships at Wapping on the River Avon from 1814, and later at Tombs' Dock in Dean's Marsh and the Butts on the Frome.

Kingsport is a small seaside village located in Kings County, Nova Scotia, Canada, on the shores of the Minas Basin. It was famous at one time for building some of the largest wooden ships ever built in Canada.

Kings County was a four-masted barque built in 1890 at Kingsport, Nova Scotia on the Minas Basin. She was named to commemorate Kings County, Nova Scotia and represented the peak of the county's shipbuilding era. Kings County was one of the largest wooden sailing vessels ever built in Canada and one of only two Canadian four-masted barques. At first registered as a four-masted full-rigged ship, she was quickly changed to a barque after her June 2 launch. More than three thousand people from Kings and Hants counties attended the launch. She survived a collision with an iceberg on an 1893 voyage to Swansea, Wales. Like many of the large wooden merchant ships built in Atlantic Canada, she spent most of her career far from home on trading voyages around the world. In 1909, she returned to the Minas Basin for a refit at Hantsport and loaded a large cargo of lumber. In 1911 she became the largest wooden ship to enter Havana Harbour when she delivered a cargo of lumber and was briefly stranded. She was lost a few months later on a voyage to Montevideo, Uruguay when she ran aground in the River Plate. Too damaged to repair, she was scrapped in Montevideo where her massive timbers were visible for many years.

Hamburg was a three masted barque built in 1886 at Hantsport, Nova Scotia. She was the largest three masted barque ever built in Canada.

Bennett Smith was a shipbuilder and shipowner in Nova Scotia, Canada. Smith briefly served as a member of the Nova Scotia House of Assembly for Hants County in 1858 and 1859 as a Liberal member.

Maitland, Nova Scotia

Maitland, East Hants, Nova Scotia is a village in East Hants, Nova Scotia. It is home to the historic Lawrence House Museum, which is part of the Nova Scotia Museum. The community was part of the Douglas Township until it was named Maitland after Governor General of Nova Scotia Peregrine Maitland (1828–34) when building the Shubenacadie Canal was first attempted (1826–1831). The Canal was supposed to start at Maitland, Nova Scotia and run through the province to Maitland Street, Dartmouth, the canal being "bookended" by two "Maitland" landmarks.

<i>Canada</i> (1891)

Canada was a full-rigged ship built in 1891 at Kingsport, Nova Scotia on the Minas Basin and was the largest sailing ship operated in Canada when launched in 1891. Canada was built and owned by Charles Rufus Burgess of nearby Wolfville, Nova Scotia. Despite the decline in wooden shipbuilding, Burgess saw that there was still potential for very large wooden sailing ships to make profits in the twilight days of the wooden sailing ship era. He had built the barque Kings County, the previous year, the largest four-masted barque ever built in Canada. Burgess planned to make Canada to be the largest sailing ship ever built in Canada, but damage, during harvesting, to a timber intended for the keel caused her length to be trimmed by ten feet making Canada slightly smaller than the ship William D. Lawrence built in 1874. However, as the William D. Lawrence had been sold to Norwegian owners and renamed in 1883, the ship Canada still claimed the honour of being the largest sailing ship under the Canadian flag at the time of her launch. Between 75 and 150 men were employed in building the ship. Canada was designed by master builder Ebenezer Cox who was in charge of the Burgess Shipyard in Kingsport where he had built ships since the 1860s and was regarded at the time to have built more ships than any man in Canada. The construction cost $111,000. Her interior included a finely outfitted captain's cabin, finished in walnut, ash and rosewood with a full dining room, office and bathroom. Her launch at noon on July 6, 1891 attracted 5,000 people from all across Western Nova Scotia, brought by multiple special trains run by the Cornwallis Valley Railway. It was regarded as the biggest event in the history of the village. A tug took the completed hull of Canada from the launch at Kingsport to Saint John, New Brunswick where the masting, rigging and outfitting was completed at the Customs House Wharf. Her immense size attracted hundreds to the Saint John waterfront to see Canada depart on September 1, 1891 for her maiden voyage, carrying with a cargo of lumber worth $144,109 bound for Liverpool, England. Classed A1 by Lloyd's Register for 14 years, Canada made several fast passages between South America and Australia. However by 1900, the ship was facing stif competition for cargoes from the growing numbers of general cargo steamships. Canada was converted to a gypsum barge in 1910, carrying gypsum from Windsor, Nova Scotia to Staten Island, New York for the Gypsum Transportation Company of New York. She was towed a final time from New York to Portland, Maine in 1926 where she was broken up.

<i>Benicia</i> (barquentine)

Benicia was a barquentine built by Matthew Turner in Benicia, California in 1899. She was known for a fast passage from Newcastle, New South Wales to Kehei, Hawaii, of 35 days.

Joseph Salter

Joseph Salter was a Canadian businessman and politician, becoming Moncton’s first mayor and one of the leading shipbuilders in the Maritime Provinces. As a young man employed by John Leander Starr of Halifax, Salter crossed the Atlantic 36 times. He later built some of the finest and largest ships in Westmorland County. He kept a diary which was published in 1996.

Founded in 1836, Frieze and Roy was a shipping, shipbuilding and trading firm located in Maitland, Hants County, Nova Scotia, Canada. The firm was integral to the success of Maitland as a hub of shipbuilding in mid-to-late 19th century Nova Scotia. Its founder, David Frieze is regarded as one of the founding fathers of the community. The firm helped expand and develop local infrastructure, laying the groundwork for Maitland's most famous shipbuilder, William Dawson Lawrence.

Maid of England was a sailing barquentine built in Gross Coques, Digby County, Nova Scotia in 1919 by Omer Blinn. Maid of England was the last square-rigged cargo vessel built in Maritime provinces of Canada. Maid of England was owned by F.K. Warren for nine years, and then later abandoned at sea in 1928.

Morning Light was a wooden sailing ship. Her size was 265.3’ by 44.1’ by 21.1’. Launched in 1856, she weighed 2377 tons. She was registered at Saint John, New Brunswick until 1867. She was made of tamarack, oak, birch and pitch pine. Her last voyage was in 1889. She was wrecked and abandoned. Her last known cargo was iron and oil.

John M. Blaikie

John MacKay Blaikie was a merchant and shipbuilder from Great Village, Nova Scotia. Blaikie ran a supply store and was responsible for the building of many ships in the region. Blaikie is significant as a ship builder for building the first four-masted barque in Canada, and one of only two built in the Maritimes.

Pictou Shipyard

The Pictou Shipyard is a Canadian shipbuilding site located in Pictou County, Nova Scotia, and made famous by its use as an emergency shipbuilding facility in World War II, during which it constructed twenty-four 4,700-ton Scandinavian class freighters.

References

  1. 1 2 Lackey, Charles A. Armour & Thomas (1975). Sailing ships of the Maritimes : an illustrated history of shipping and shipbuilding in the Maritime Provinces of Canada, 1750-1925 . Toronto: McGraw-Hill Ryerson. pp.  180–181. ISBN   007077756X.
  2. 1 2 3 "History - Kingsport Nova Scotia" . Retrieved 11 February 2013.
  3. The Acadian and King's Co. Times Vol. XII, No. 41, June 2, 1893, p. 1
  4. Peppard, Albert L. (1998). The Cox Connection: The Descendants of Captain John Cox (1717– 1789). Greenwood, NS: Valley Genealogies.