Smith & Wesson Model 36 | |
---|---|
Type | Revolver |
Place of origin | United States |
Service history | |
In service | 1950–present |
Used by | See Users |
Production history | |
Manufacturer | Smith & Wesson |
Unit cost | $110.00 (blued) (1976) $121.00 (nickel) (1976) |
Specifications | |
Mass | 19.5 oz (550 g) |
Length | 6.22 in (15.8 cm) |
Barrel length | 2 in (5.1 cm) or 3 in (7.6 cm) |
Caliber | .38 Special |
Action | Double Action/Single Action |
Feed system | 5-round cylinder |
Sights | Fixed rear, front blade (Model 36); adjustable rear, fixed front (Model 50) |
The Smith & Wesson Model 36 (also known as the Chiefs Special) is a revolver chambered for .38 Special. It is one of several models of J-frame revolvers. It was introduced in 1950, and is still in production in the classic blued Model 36 and the stainless steel Model 60.
The Model 36 was designed in the era just after World War II, when Smith & Wesson stopped producing war materials and resumed normal production. For the Model 36, they sought to design a revolver that could fire the more powerful (compared to the .38 Long Colt or the .38 S&W) .38 Special round in a small, concealable package. Since the older I-frame was not able to handle this load, a new frame was designed, which became the J-frame.
The new design was introduced at the International Association of Chiefs of Police (IACP) convention in 1950, and was favorably received. A vote was held to name the new revolver, and the name "Chiefs Special" won. [1] [2] A 3-inch (76 mm) barreled version design went into production immediately, due to high demand. It was available in either a blued or nickel-plated finish. [3] It was produced as the "Chiefs Special" until 1957, when it then became the Model 36. The "Chiefs Special" continued to be manufactured as a separate variant.
In 1951, Smith & Wesson introduced the Airweight Model 37, which was basically the Model 36 design with an aluminum frame and cylinder. The aluminum cylinders proved to be problematic and were abandoned in favor of a steel cylinder. [3]
In 1989, Smith & Wesson introduced the LadySmith variant of the Model 36. This was available with 2 in (51 mm) or 3 in (76 mm) barrel and blued finish. This model also featured special grips designed specifically for women, and had "LADYSMITH" engraved on the frame. [4]
Approximately 615 Model 36-6 Target variations were produced. This variant had a 3-inch full lug barrel with adjustable sights and a blued glass finish.
In 2002, Smith & Wesson reintroduced the Model 36 with gold features (hammer, thumbpiece, extractor, and trigger), calling it the "Model 36 Gold". The gold color was actually titanium nitride.
In 2005, Smith & Wesson produced the "Texas Hold 'Em" variant. This was produced with a blued finish, imitation ivory grips, and 24k gold plate engraving.
Many Model 37 variants with a lanyard ring attached were made for Japan. Part of this contract was cancelled, resulting in many of these being sold to a wholesaler, who then re-sold them for civilian use. These entered the civilian market in 2001. In 2006, the Model 37 was dropped from Smith & Wesson's catalog.
Serial number 337 was shipped to J. Edgar Hoover and is engraved with his name.
In 1958, Spanish manufacturer Astra developed a high quality revolver line based on this weapon, under the name of Astra Cadix, Astra 250 and Astra NC6.
Designed to be small and compact, the Model 36 has been produced with 2-inch (1.875 inch actual length) or 3-inch barrels with fixed sights. A version with an adjustable rear sight, the Model 50 Chief's Special Target, was also produced in limited numbers with both 2-inch and 3-inch barrels.
Like nearly all other "J-frame" Smith & Wesson revolvers, it has a 5-round capacity in a swing-out cylinder, and features an exposed hammer. It features a nickel-plated or blued finish and either wood or rubber grips.
Model | Year | Modifications |
---|---|---|
1957 | Before 1957 produced as the Chief Special | |
36 | 1957 | Stamping of model serial number at 125000 |
36 | 1962 | Internal hammer alteration at serial 295000 to mainspring rod junction changed from ball and socket to fork and pin |
36 | 1966 | Thumb piece changed from 3rd style to flat latch for standard latch |
36-1 | 1967 | 3” heavy barrel, changed to forked mainspring strut |
36-1 | 1968 | Delete diamond grip |
36-1 | 1969 | Begin J serial number prefix at J1 |
36-1 | 1975 | Heavy barrel standard |
36-1 | 1982 | Eliminate pinned barrel |
36-2 | 1988 | New yoke retention system tapered barrel |
36-3 | 1988 | New yoke retention system heavy barrel |
36-4 | 1989 | Lady Smith Version 2” barrel standard |
36-5 | 1989 | Lady Smith Version 3” heavy barrel |
36-5 | 1992 | Lady Smith discontinued 3” barrel on LS; Ship w/LS soft case |
36-5 | 1994 | Laminate rosewood grips, change extractor |
36-6 | 1989 | Special production target version, 3” full lug with ribbed barrel, ramp on ramp base, wide smooth trigger |
36-7 | 1990 | New sight width on standard frame and barrel from 1/10” to 1/8” |
36-8 | 1990 | New sight width for heavy barrel frame to 1/8” |
36-8 | 1991 | Limited edition with full lug and target sights |
36-8 | 1992 | 2” and 3” HB round but only |
36-8 | 1994 | Uncle Mike’s grips, change extractor |
36-8 | 1995-96 | Delete square butt features, 2” barrel only in production, begin shipments in foam filled blue plastic case |
36-9 | 1996 | J magnum frame introduced rated for .38+P with 1.6” cylinder, change to MIM hammer and trigger, change to internal lock, ship with Master trigger lock |
36-9 | 1997 | Change to MIM thumbpiece |
36-9 | 1999 | Model 36 Discontinued |
36-10 | 2007 | Model 36 Classic Series begins with blue, nickel and case color in 2” or 3” barrel |
Smith & Wesson Brands, Inc. (S&W) is an American firearm manufacturer headquartered in Maryville, Tennessee, United States.
The Smith & Wesson Model 29 is a six-shot, double-action revolver chambered for the .44 Magnum cartridge and manufactured by the United States company Smith & Wesson.
The Smith & Wesson Model 19 is a revolver produced by Smith & Wesson that was introduced in 1957 on its K-frame. The Model 19 is chambered for .357 Magnum. The K-frame is somewhat smaller and lighter than the original N-frame .357, usually known as the Smith & Wesson Model 27. A stainless steel variant of the Model 19, the Smith & Wesson Model 66, was introduced in 1971.
The Smith & Wesson Model 10, previously known as the Smith & Wesson .38 Hand Ejector Model of 1899, the Smith & Wesson Military & Police or the Smith & Wesson Victory Model, is a K-frame revolver of worldwide popularity. In production since 1899, the Model 10 is a six-shot, .38 Special, double-action revolver with fixed sights. Over its long production run it has been available with barrel lengths of 2 in (51 mm), 3 in (76 mm), 4 in (100 mm), 5 in (130 mm), and 6 in (150 mm). Barrels of 2.5 inches (64 mm) are also known to have been made for special contracts. Some 6,000,000 of the type have been produced over the years, making it the most-produced handgun of the 20th century.
The Smith & Wesson Model 586, is a six- or seven-shot double-action revolver chambered for the .357 Magnum cartridge; it will also chamber and fire .38 Special cartridges. The Model 586 has a carbon steel construction and is available in a blued or nickel finish; it is essentially the same firearm as the Model 686, which has stainless steel construction. It is also known as the Distinguished Combat Magnum.
The Smith & Wesson Model 686 is a six- or seven-shot double-action revolver manufactured by Smith & Wesson and chambered for the .357 Magnum cartridge; it will also chamber and fire .38 Special cartridges. Smith & Wesson introduced the Model 686 in 1981. It is the stainless steel version of the Model 586, which featured a blued steel finish. They are available ported and unported with a choice of 6- or 7-round cylinders.
The Smith & Wesson Model 15, initially the Smith & Wesson K-38 Combat Masterpiece, is a six-shot double-action revolver with adjustable open sights produced by Smith & Wesson on the medium-size "K" frame. It is chambered for the .38 Special cartridge and is fitted with a 4-inch (100 mm) barrel, though additional barrel options have been offered at various times during its production. It is essentially a shorter barrel version of the Smith & Wesson Model 14 and an adjustable-sight version of the seminal Smith & Wesson Model 10 with target shooting features.
The Smith & Wesson K-22 Target Masterpiece Revolver is a six-shot, double-action revolver with adjustable open sights, built on the medium-size "K" frame. When introduced, it was intended for bullseye target shooting competition of the type then most common on the United States, which is today called NRA Precision Pistol, specifically in the "smallbore" or "22" category. It is chambered for the .22 Long Rifle cartridge. It is one of three similar models that Smith & Wesson offered, the other two being intended for the "centerfire" category, the K-32 Target Masterpiece chambered for the .32 S&W Long cartridge and the K-38 Target Masterpiece chambered for the .38 Special cartridge. Most K-22 revolvers were fitted with a 6 in (150 mm) or 8+3⁄8 in (210 mm) barrel, but other lengths have been produced. First produced in 1947 and originally known as the K-22 Target Masterpiece, it was numbered the Model 17 in 1957 when all Smith & Wesson guns were given numerical model numbers. It is built on the same frame as the seminal Smith & Wesson Model 10 revolver.
A snubnosed revolver is a small, medium, or large frame revolver with a short barrel, generally less than 3 inches in length. Smaller such revolvers are often made with "bobbed" or "shrouded" hammers and there are also "hammerless" models ; the point is to allow the gun to be drawn with little risk of it snagging on clothing. Since the external movement of the mechanism is minimal or nil, shrouded and hammerless models may be fired from within clothing. The design of these revolvers compromises range and accuracy at a distance in favor of maneuverability and ease of carry and concealment.
The Colt Detective Special is a six-shot, carbon steel framed, 2-inch (5.1 cm) or 3-inch (7.6 cm) barreled, double-action revolver, and the first example of a class of firearms known as "snubnose revolvers". Made by Colt's Manufacturing Company, this model revolver, as the name "Detective Special" suggests, was intended to be a concealed weapon used by plainclothes police detectives.
The Smith & Wesson Model 13 is a .357 Magnum revolver designed for military and police use. It is based on Smith & Wesson's K-frame—specifically, it is a .357 Magnum version of the heavy-barrel variant of the .38 Special Model 10.
The Smith & Wesson Model 64Military and Police revolver is the stainless steel version of the Model 10.
S&W Centennial is a family of revolvers made by Smith & Wesson on the "J-Frame". Depending upon caliber, the cylinder holds either 5, 6, 7, or 8 cartridges. Centennials feature a fully enclosed (internal) hammer, which makes them Double Action Only (DAO) firearms. Like all other "J-frame" Smith & Wesson revolvers, they have a swing-out cylinder. Centennial models have been made in different versions like PD "Personal Defense" and LS "Lady Smith".
The Colt Trooper is a medium frame, double-action revolver featuring a six-round cylinder, chambered for .22 Long Rifle, .22 Winchester Magnum Rimfire, .38 Special, and .357 Magnum caliber cartridges. Designed as a less expensive alternative to the upscale Colt .357 and the later Colt Python and Colt King Cobra, it was marketed to law enforcement agencies as well as civilians.
The Smith & Wesson Model 57 is an 'N' frame (large), double-action revolver with a six round cylinder, chambered for the .41 Magnum cartridge, and designed and manufactured by the Smith & Wesson firearms company. The gun was designed as a weapon for law enforcement agencies. However, due to size and recoil it found more favor with civilian target shooters and hunters.
The Ruger Security-Six and its variants, the Service-Six and Speed-Six are a product line of double-action revolvers introduced in 1972 and manufactured until 1988 by Sturm, Ruger & Co. These revolvers were marketed to law enforcement duty issue, military, and civilian self-defense markets.
The Smith & Wesson Safety Hammerless or Smith & Wesson New Departure is a double-action revolver that was produced from 1887 to 1940 by Smith & Wesson. Based on the Smith & Wesson Model 2 double-action design, the revolver incorporated an internal hammer and an external grip safety on its back-strap. It was chambered in .32 S&W and .38 S&W calibers; these revolvers were discontinued prior to World War II, being eclipsed by the stronger hand ejector models.
The Smith & Wesson Bodyguard is a family of small J-frame revolvers with shrouded hammers manufactured by Smith & Wesson. They are available chambered in either .38 Special or .357 Magnum.
The Smith & Wesson Model 1+1⁄2 was Smith & Wesson's second .32 caliber revolver, intended to combine the small size and convenience of the .22 caliber Model 1 with the larger caliber of the 6-shot "belt sized" Model 2, which was introduced in 1861. Chambered in .32 Rimfire, its cylinder held 5 shots. It was produced in three varieties from 1865 through 1892, with total production exceeding 223,000.
The Smith & Wesson Model 2, also referred to as the Smith & Wesson .38 Single Action, was a .38 caliber revolver produced in both single and double action by Smith & Wesson. The manufacturer's first of that caliber, its 5-shot cyclinder was chambered in .38 S&W. The single-action was produced in three varieties from 1876 through 1911, with total production exceeding 223,000 units; the double-action in three variants from 1880 to 1913, with total sales somewhat under one-million guns.