Sopwith Snark

Last updated

Snark
Role Fighter aircraft
National origin United Kingdom
Manufacturer Sopwith Aviation Company
First flight1919
Number built3

The Sopwith Snark was a British prototype fighter aircraft designed and built towards the end of the First World War to replace the RAF's Sopwith Snipes. A single engined triplane, the Snark did not fly until after the end of the war, only three being built.

Contents

Development and design

In spring 1918, although the Sopwith Snipe had not yet entered service with the Royal Air Force, the British Air Ministry drew up a specification (RAF Type I) for its replacement. The specification asked for a fighter capable of operations at high altitude and powered by the ABC Dragonfly engine, which was an air-cooled radial engine which had been ordered in large numbers based on promises of high performance and ease of production.

Sopwith produced two designs to meet this requirement, a biplane, the Snapper, and a triplane, the Snark. Sopwith received orders for three prototypes each of the Snapper and Snark, [1] as well as orders for 300 of a Dragonfly powered version of the Snipe, the Sopwith Dragon. The Snark had a wooden monocoque fuselage like that of the Sopwith Snail lightweight fighter, and had equal span single-bay wings with ailerons on each wing. The wings had unequal spacing and stagger, with the gap between the mid and upper wings less than that between the lower and mid wings to minimise the height of the aircraft. [2]

The Snark was fitted with what was, for the time, a very heavy armament for a single-seat fighter. In addition to the normal two synchronised Vickers guns inside the fuselage, it had four Lewis guns mounted under the lower wings, firing outside the propeller disc. These guns were inaccessible to the pilot, and so could not be reloaded or unjammed in flight. [3] [a]

The first prototype was complete by October 1918, but flight-ready engines were not available until March 1919, and the Snark did not make its first flight until July 1919. [4] While it demonstrated reasonable performance and good maneuverability, [3] (although not as good as the earlier Sopwith Triplane [5] ), by this time, it had been realised that the Dragonfly engine had serious problems, being prone to overheating and severe vibration, and plans for production of the Snark had been abandoned. [6] The three Snarks continued in use for trials purposes until 1921. [7]

Specifications

Data from War Planes of the First World War: Fighters Volume Three [5]

General characteristics

Performance

Armament

See also

Aircraft of comparable role, configuration, and era

Related Research Articles

<span class="mw-page-title-main">Sopwith Salamander</span> British WW1 biplane ground attack/close support aircraft

The Sopwith TF.2 Salamander was a British ground-attack aircraft of the First World War designed by the Sopwith Aviation Company which first flew in April 1918. It was a single-engined, single-seat biplane, based on the Sopwith Snipe fighter, with an armoured forward fuselage to protect the pilot and fuel system from ground fire during low level operations. It was ordered in large numbers for the Royal Air Force but the war ended before the type could enter squadron service, although two were in France in October 1918.

<span class="mw-page-title-main">Sopwith Snipe</span> British WW1 biplane fighter aircraft

The Sopwith 7F.1 Snipe was a British single-seat biplane fighter of the Royal Air Force (RAF). It was designed and built by the Sopwith Aviation Company during the First World War, and came into squadron service a few weeks before the end of the conflict, in late 1918.

<span class="mw-page-title-main">Sopwith Triplane</span> British WW1 triplane fighter aircraft

The Sopwith Triplane was a British single seat fighter aircraft designed and manufactured by the Sopwith Aviation Company during the First World War. It has the distinction of being the first military triplane to see operational service.

<span class="mw-page-title-main">Sopwith Dolphin</span> British WW1 biplane fighter aircraft

The Sopwith 5F.1 Dolphin was a British fighter aircraft manufactured by the Sopwith Aviation Company. It was used by the Royal Flying Corps and its successor, the Royal Air Force, during the First World War. The Dolphin entered service on the Western Front in early 1918 and proved to be a formidable fighter. The aircraft was not retained in the postwar inventory and was retired shortly after the war.

<span class="mw-page-title-main">Nieuport Nighthawk</span> Type of aircraft

The Nieuport Nighthawk was a British fighter aircraft developed by the Nieuport & General Aircraft company for the Royal Air Force towards the end of the First World War. Although ordered into production before the aircraft first flew, it did not enter large scale service with the RAF owing to unreliable engines. Re-engined aircraft did see service in Greece, serving from 1923 to 1938.

<span class="mw-page-title-main">Sopwith Dragon</span> British WW1 biplane fighter aircraft

The Sopwith Dragon was a British single-seat fighter biplane developed from the Sopwith Snipe.

The Armstrong Whitworth Ara was an unsuccessful British single-seat biplane fighter aircraft of the First World War built by Armstrong Whitworth.

The Nieuport B.N.1 was a prototype British single-engined fighter aircraft of the First World War. It was a single-engined biplane intended to replace the Sopwith Camel, but only one was built, being destroyed in a crash. The Sopwith Snipe was built instead to replace the Camel.

The Sopwith 8F.1 Snail was a prototype British Fighter aircraft of the First World War. It was unsuccessful, being abandoned due to an unreliable engine.

The Sopwith Snapper was a prototype British fighter aircraft of the First World War. A single-engined biplane designed by the Sopwith Aviation Company to replace the Sopwith Snipe fighter, it first flew after the end of the war, but did not enter service owing to the failure of its engine, only three aircraft being built.

<span class="mw-page-title-main">Austin Osprey</span> Type of aircraft

The Austin A.F.T.3 Osprey was a prototype British fighter triplane of the First World War. Developed by the motor car manufacturer Austin as a replacement to the Sopwith Camel, only one was built, the Sopwith Snipe being preferred.

<span class="mw-page-title-main">BAT Basilisk</span> Type of aircraft

The BAT F.K.25 Basilisk was a prototype British fighter aircraft of the First World War. A single engined biplane intended to meet a requirement to replace the Sopwith Snipe, the Basilisk was unsuccessful, only three being built.

The Sopwith 2FR.2 Bulldog was a prototype British two-seat fighter of the First World War. A single-engined biplane, the Bulldog was a fighter/reconnaissance aircraft intended to replace the Bristol F.2 Fighter, but was unsuccessful, with no replacement for the Bristol Fighter being purchased.

The Armstrong Whitworth F.K.5 and F.K.6 were experimental triplanes built as escort fighters by Armstrong Whitworth during the First World War. They carried two gunners in nacelles mounted on the centre wing. One example of each type was built, with no further development or production following.

The Sopwith Long Range Tractor Triplane (L.R.T.Tr) was a prototype British long-range three-seat triplane escort fighter of the First World War. Its unusual layout had a small gunner's nacelle mounted on the upper wing for an all-round field of fire. Only a single example was built, as other, smaller fighters proved more practicable.

The Sopwith 3F.2 Hippo was a prototype British two-seat fighter aircraft of the First World War. It was a single-engined biplane with considerable negative stagger. It was not successful, the Bristol F.2 Fighter being preferred by the Royal Flying Corps.

<span class="mw-page-title-main">Vickers F.B.16</span> Type of aircraft

The Vickers F.B.16 was a British single-seat fighter aircraft of the First World War. It was originally designed to be powered by an experimental radial engine, development of which was abandoned. When re-engined with more powerful and reliable water-cooled V-8 engines, the F.B.16 demonstrated good performance, but only a few prototypes were built, the type not entering service.

The Sopwith Cobham was a British twin-engined triplane bomber aircraft designed and built by the Sopwith Aviation Company during the First World War. The only twin-engined aircraft built by Sopwith, the Cobham did not fly until after the end of the war, and was unsuccessful due to the failure of its engines, only three prototypes being built.

<span class="mw-page-title-main">Sopwith Swallow</span> British WW1 parasol monoplane fighter aircraft

The Sopwith Swallow was a British parasol wing fighter aircraft of the First World War. A single example was built, but it saw no production, offering no performance advantages over contemporary biplanes.

<span class="mw-page-title-main">Sopwith Rhino</span> British WW1 triplane bomber aircraft

The Sopwith 2B2 Rhino was a British two-seat triplane bomber designed and built by Sopwith Aviation Company as a private venture. The Rhino was powered by a 230 hp (172 kW) Beardmore Halford Pullinger inline piston engine. Only two aircraft were built and the type did not enter production.

References

Notes

  1. Bruce 1969, pp. 52, 56.
  2. Bruce 1969, pp. 51–52.
  3. 1 2 Bruce 1957, p.632.
  4. 1 2 Mason 1992, p.145.
  5. 1 2 Bruce 1969, p.55.
  6. Bruce 1969, p.53.
  7. Robertson 1970, p.229.
  8. Bruce 1957, p. 634.
  9. Robertson 1970, p.105.

Bibliography

  • Bruce, J.M. British Aeroplanes 1914–18. London:Putnam, 1957.
  • Bruce, J.M. War Planes of the First World War: Fighters Volume Three. London:Macdonald, 1969. ISBN   0-356-01490-8.
  • Mason, Francis K. The British Fighter since 1912. Annapolis, USA:Naval Institute Press, 1992. ISBN   1-55750-082-7.
  • Robertson, Bruce. Sopwith-The Man and his Aircraft. Letchworth, UK:Air Review, 1970. ISBN   0-900435-15-1.