Spokane, Portland and Seattle class L-1

Last updated
L-1
Type and origin
Power typeSteam
Builder Schenectady Locomotive Works
Build dateMarch 1889
Specifications
Configuration:
   Whyte 4-4-0
Gauge 4 ft 8+12 in (1,435 mm)
Driver dia.62 in (1,575 mm)
Adhesive weight 64,000 lb (29.0 t)
Loco weight96,380 lb (43.7 t)
Fuel typeOil
Boiler pressure140 lbf/in2 (0.97 MPa)
Cylinders Two
Cylinder size 18 in × 26 in (457 mm × 660 mm)
Performance figures
Tractive effort 16,168 lbf (71.92 kN)
Career
Operators Spokane, Portland and Seattle Railway
Class L-1
Numbers50
Locale United States
RetiredAugust 30, 1928
Sources: [1]

Spokane, Portland and Seattle Railway Class L-1 was a class of 4-4-0 steam locomotives built in 1889 by Schenectady Locomotive Works.

Related Research Articles

<span class="mw-page-title-main">Great Northern Railway (U.S.)</span> Defunct American Class I railroad

The Great Northern Railway was an American Class I railroad. Running from Saint Paul, Minnesota, to Seattle, Washington, it was the creation of 19th-century railroad entrepreneur James J. Hill and was developed from the Saint Paul & Pacific Railroad. The Great Northern's route was the northernmost transcontinental railroad route in the U.S.

<i>Empire Builder</i> Northern U.S. rail service

The Empire Builder is a daily long-distance passenger train operated by Amtrak between Chicago and either Seattle or Portland via two sections west of Spokane. Introduced in 1929, it was the flagship passenger train of the Great Northern Railway and was retained by Amtrak when it took over intercity rail service in 1971.

<span class="mw-page-title-main">Spokane, Portland and Seattle Railway</span> Defunct American Class I railroad (1908–1970)

The Spokane, Portland & Seattle Railway was a railroad in the northwest United States. Incorporated in 1905, it was a joint venture by the Great Northern Railway and the Northern Pacific Railway to build a railroad along the north bank of the Columbia River. The railroad later built or acquired other routes in Oregon. The SP&S was merged into the Burlington Northern in March, 1970. Remnants of the line are currently operated by BNSF Railway and the Portland and Western Railroad.

<i>North Coast Limited</i> Former named passenger train

The North Coast Limited was a named passenger train operated by the Northern Pacific Railway between Chicago and Seattle via Bismarck, North Dakota. It started on April 29, 1900, and continued as a Burlington Northern Railroad train after the merger on March 2, 1970 with Great Northern Railway and the Chicago, Burlington and Quincy Railroad. The next year, it ceased operations after the trains which left their originating stations on April 30, 1971, the day before Amtrak began service, arrived at their destinations.

<span class="mw-page-title-main">Spokane, Portland and Seattle 700</span> Preserved American 4-8-4 steam locomotive

Spokane, Portland & Seattle 700 is the oldest and only surviving example of the class "E-1" 4-8-4 "Northern" type steam locomotive and the only surviving "original" Spokane, Portland and Seattle Railway steam locomotive. It was built by the Baldwin Locomotive Works in May 1938. Nearly identical to the class "A-3" Northerns built for Northern Pacific Railway, it burns oil instead of coal.

<span class="mw-page-title-main">Spokane Intermodal Center</span> Train station in Spokane, Washington, United States

The Spokane Intermodal Center is an intermodal transport facility located in Spokane, Washington, United States. It serves as a service stop for the Amtrak Empire Builder, as well as the Greyhound, Trailways, and Jefferson Lines station for Spokane. The Empire Builder provides service daily between Chicago, Illinois and Spokane before continuing on to Seattle, Washington or Portland, Oregon.

The SP&S Class A-1 steam locomotives were a group of 5 identical locomotives. They were used in the rail yards at Portland, Oregon, and Vancouver, Washington, from 1907 to 1952. They were replaced with diesel-electric switch locomotives.

Spokane, Portland and Seattle Railway No. 6 was the only locomotive in Class A-2. Purchased from the Northern Pacific Railway for A. B. Hammond's Astoria and Columbia River Railway, number 6 came to the SP&S secondhand. It was used as a switch locomotive until 1931 when it was sold to the St Helens Terminal and Dock Co. at St. Helens Oregon.

Spokane, Portland and Seattle Railway's Class A-3 was a class of 0-6-0 steam locomotive switchers.

Spokane, Portland and Seattle Railway's Class L-2 was a class of 4-4-0 steam locomotives.

Spokane, Portland and Seattle Railway's Class L-3 was a class of 4-4-0 steam locomotives.

The Spokane, Portland and Seattle Railway (SP&S) class L-4 steam locomotives were originally used by the Astoria and Columbia River Railroad (AC&R). They became SP&S locomotives when the SP&S acquired the A&CR.

Spokane, Portland and Seattle Railway Class L-5 was a class of 4-4-0 steam locomotives built in 1897 by Schenectady Locomotive Works.

On the American Spokane, Portland and Seattle Railway, locomotive number 525 was the only steam locomotive in SP&S class O-2. It was originally built for Northern Pacific by the Schenectady Locomotive Works. Builders number 46878 was built in February 1910.

<span class="mw-page-title-main">Spokane, Portland and Seattle class E-1</span> Class of American 4-8-4 locomotives

Spokane Portland and Seattle Railway's E-1 class was a class of the only three 4-8-4 locomotives built by the Baldwin Locomotive Works in 1938. The E-1 class "Northerns" were very similar to the A-2 through the A-5 class "Northerns" on the Northern Pacific Railroad built by Baldwin from 1934–1943. Visually, the locos are near-identical. The only difference is that the Northern Pacific Railroad 4-8-4s burn coal and the 4-8-4s on the Spokane, Portland and Seattle Railroad burn oil.

The Great Northern O-1 was a class of 145 2-8-2 "Mikado"-type steam locomotives built by the Baldwin Locomotive Works between 1911 and 1919 and used by the Great Northern Railway until the late 1950s.

<span class="mw-page-title-main">Great Northern 2507</span>

Great Northern 2507 is a 4-8-2 "Mountain" type steam locomotive, a member of the P-2 class. Built for passenger service, the locomotive was assigned to pull the Great Northern's mainline passenger trains such as the Empire Builder and Oriental Limited, until being retired in December 1957 and sold to Spokane, Portland and Seattle Railway. GN 2507 is one of only two surviving examples of a P-2 class locomotive and, since 2003, has been on display at Wishram station in Wishram, Washington.

<span class="mw-page-title-main">Spokane, Portland and Seattle 539</span> Preserved American 2-8-2 locomotive

Spokane, Portland and Seattle Railway No. 539 is the only preserved example of the class O-3 2-8-2 "Mikado" steam locomotive. It was built by the American Locomotive Company in 1917 for the Northern Pacific Railway as engine No. 1762. It was sold to the Spokane, Portland and Seattle Railway and renumbered 539, in August 1944. It was reconfigured and converted to oil burning in January 1946. The locomotive was retired in 1957, and it was displayed in Esther Short Park, Washington, until 1997. That year, it was moved to Battle Ground for a potential restoration that never came to fruition. In 2007, it was acquired by the Grand Canyon Railway and moved to Williams, Arizona for an operational restoration that also never came to fruition. In 2019, No. 539 was purchased again by the Port of Kalama, who moved it back to Washington and put it on static display inside the Port's Interpretive Center that was constructed in 2014.

References

  1. Gartner, John T. (1990). North Bank Road, The Spokane Portland and Seattle Railway. WSU Press. p. 206.