Spokane, Portland and Seattle 539

Last updated
Spokane, Portland and Seattle 539
Grand Canyon Steam Locomotive Williams 1 (15538801481).jpg
No. 539 on static display at the Williams Depot shortly after its cosmetic repaint, 2014
Type and origin
Power typeSteam
Builder American Locomotive Company (Brooks works)
Serial number57954
Build dateSeptember 1917, Reconfigured January 1946
Specifications
Configuration:
​
 •  Whyte 2-8-2
 •  UIC 1D'1 h
Gauge 4 ft 8+1⁄2 in (1,435 mm) standard gauge
Driver dia.63 in (1,600 mm)
Length77 ft (23 m)
Axle load 64,400 lb (29,200 kg)
Adhesive weight 247,000 lb (112,000 kg)
Loco weight337,000 lb (153,000 kg)
Total weight551,000 lb (250,000 kg)
Fuel typeNew: Coal
Now: Bunker oil
Fuel capacity Coal: 36,000 lb (16,329.3 kg; 16.3 t)
Fuel oil: 4,357 US gal (16,490 L; 3,628 imp gal)
Water cap.New: 10,000 US gal (38,000 L; 8,300 imp gal)
Now: 9,300 US gal (35,000 L; 7,700 imp gal)
Firebox:​
 • Grate area70.3 sq ft (6.53 m2)
Boiler pressure200 lbf/in2 (1.38 MPa)
Cylinders Two
Cylinder size 28 in × 30 in (711 mm × 762 mm)
Valve gear Walschaerts
Valve type Piston valves
Loco brake Air
Performance figures
Maximum speed40 mph (64 km/h)
Tractive effort 57,120 lb (25,910 kg)
Career
Operators Northern Pacific Railway
Spokane, Portland and Seattle Railway
Class W-3(NP)
O-3 (SP&S)
NumbersNP 1762
SP&S 539
GCRY 539
Last run1956
Retired1957
Current ownerPort of Kalama
DispositionOn indoor static display at Interpretive Center

Spokane, Portland and Seattle Railway No. 539 is the only preserved example of the class O-3 2-8-2 "Mikado" steam locomotive. It was built by the American Locomotive Company in 1917 for the Northern Pacific Railway as engine No. 1762. It was sold to the Spokane, Portland and Seattle Railway and renumbered 539, in August 1944. It was reconfigured and converted to oil burning in January 1946. The locomotive was retired in 1957, and it was displayed in Esther Short Park, Washington, until 1997. That year, it was moved to Battle Ground for a potential restoration that never came to fruition. In 2007, it was acquired by the Grand Canyon Railway and moved to Williams, Arizona for an operational restoration that also never came to fruition. In 2019, No. 539 was purchased again by the Port of Kalama, who moved it back to Washington and put it on static display inside the Port's Interpretive Center that was constructed in 2014.

Contents

History

Revenue service years

In the early 1910s, the Northern Pacific Railway (NP), a class I railroad that ran in the Northwestern United States between Washington (state) and Minnesota, had experienced an increase in freight traffic. [1] They consequently decided to design a series of 2-8-2 "Mikado" type locomotives, and the locomotives were built by the American Locomotive Company (ALCO)’s various factories and the NP’s own shops in Brainerd, Minnesota. [2] One of the classes was the W-3, with 135 such locomotives built by ALCO's former Brooks Locomotive Works in Dunkirk, New York, numbered 1700–1834. First, there were fifty-three built between March and May 1913, and then there were nineteen locomotives built in September 1917, and then thirty-nine locomotives in June 1918, and then twenty-four locomotives in November 1920.

No. 539 was numbered 1762 at the time, and was among the second batch of locomotives built in 1917. These enlarged versions of the basic W class 2-8-2s were assigned to pull dual service trains across the NP system, and they showed the effects of superheating on the layout of tubes and flues, and compared to the Q-5 4-6-2 "Pacifics" built by Brooks in 1920, the W-3s had slightly larger boilers, but with less firebox heating surfaces. The 1917 locomotives, as well as the later ones, had 216 tubes, which raised the evaporative heating surface area to 3,634 square feet.

The Spokane, Portland and Seattle Railway (SP&S) was jointly owned by the Northern Pacific and the Great Northern Railroads and was never permitted to design steam locomotives of its own. [3] Rather, it received most of its motive power as hand-me-downs from its two parent companies, or as add-ons to one of its parents' order of locomotives, such as the E-1 class 4-8-4 "Northerns". The SP&S operated twenty-six 2-8-2s, which were all obtained second-hand. Ten of such locomotives were NP W-3s that were acquired between 1926 and 1944; Numbers 1765, 1704, 1727, 1744, 1747, 1702, 1726, 1723, 1751, and 1762, and in that order, they were renumbered 530–539 by the SP&S.

No. 539 was acquired by the SP&S in August, 1944. While on the SP&S, they were reclassified as O-3s, and they were converted to burn oil, since the SP&S preferred that all the steamers on their roster burn oil, as opposed to coal, a common fuel source on the NP. Locomotive No. 539 was converted to oil burning in January 1946 (with the coal stoker returned to NP). No. 539, as well as No. 538, would have their water capacity decreased by 700 gallons in order to hold 4,357 gallons of oil. They also held four more boiler tubes than the other eight. The O-3s were assigned for dual service runs to Wishram and on the Oregon trunk to Bend, Oregon, and after 1954, when Diesel locomotives had completely replaced steam for passenger service, the O-3s were fully relegated to freight service. By 1957, the SP&S, the NP, and the Great Northern Railroads had all retired their steam locomotive fleets, and that same year, No. 539's fire was dropped for the last time, after logging approximately 174,378 miles without any major accidents or derailments.

Preservation

In 1957, the SP&S donated the No. 539 to the City of Vancouver. [4] On September 30 of that year, a lift truck moved 33-foot sections of track in place in front of No. 539 as the locomotive made its 31/2-block run from Seventh and Harney Streets to its new display site at Esther Short Park. About 200 members of the railroad brotherhoods volunteered to move the locomotive, and it was accomplished in about five hours. Reuben E. Brown, a retired SP&S engineer, fireman, and Great Northern employee, was one of the engineers who drove No. 539 to its new home in the park, and he was one of several railroad veterans who showed up for that day's operation. The park with the locomotive was dedicated on October 5, 1957. Gleaming in a new paint job of black and silver, the locomotive would remain in the park as a lasting memorial to railroading's steam age for the next forty years. By 1960, No. 539 became one of only two SP&S steam locomotives that were left to survive, and the only other locomotive is 4-8-4 No. 700.

In the early 1990s, Brian Fleming, a former owner and operator of the Mount Hood Railroad, purchased No. 539 from the city, and he came up with plans to restore the locomotive to operating condition in Montana. [5] [6] Beginning on April 26, 1997, a salvation group removed some components to make moving No. 539 easier, including the connecting rods for smoother motion, and the cowcatcher for easier crane rigging access. Extended temporary rails were also installed behind the locomotive for additional space to position the cranes, since at the time, No. 539's display site was surrounded by trees. On June 21, workers with two trucks and a heavyweight crane arrived to move the locomotive down the street to the Burlington Northern (BN) mainline, and people gathered to watch the process. [7] First, the tender was pulled out and lifted from the rails, and placed onto the flatbed of the first truck. Then, the locomotive itself was backed out of the park and then lifted up and placed onto the second truck. The locomotive and the tender were brought onto BN trackage and then towed to a nearby Power station under a rooftop.

On October 5, the locomotive arrived at a park in Battle Ground. In June 1999, a 120' x 90' steel building has been donated to the group. The building was dismantled and moved to Battle Ground awaiting reconstruction, since it was intended to be used to house the locomotive for restoration. Despite all these plans and donations, however, the potential restoration on No. 539 fell through. Instead, No. 539 sat on static display surrounded by portable metal fences. The locomotive was also missing most of its essential components, including all of its connecting rods, its boiler jacketing, its cylinder coverings, its headlight, and its builder's plates.

No. 539 at the Williams Depot near EMD f40ph No. 295, 2017 Grand Canyon Railway in Williams, Arizona 09.jpg
No. 539 at the Williams Depot near EMD f40ph No. 295, 2017

In 2007, the Grand Canyon Railway (GCRY), a former Atchison, Topeka and Santa Fe branch line that lied between Williams, Arizona and the south rim of the Grand Canyon National Park, was looking for a larger and more powerful locomotive to meet the demand for more tractive effort, since their loaded passenger trains were getting longer. [8] Subsequently, Fleming approached an agreement with the GCRY to trade No. 539 in exchange for Ex-Lake Superior and Ishpeming (LS&I) 2-8-0 "Consolidation" locomotives Numbers 18 and 20. A train was made and tied on a skate of the main line at Battle Ground just before the Portland Vancouver Junction Railroad crew went off duty on April 5, and they expected to deliver No. 539 to the Burlington Northern and Santa Fe (BNSF) the following day. The boiler was separated from the frame and running gear, and they were placed on separate flatcars. The locomotive arrived at Williams in May of the same year. [9] The initial plan was to give No. 539 a thorough rebuild to use it to pull their passenger trains alongside Ex-Chicago, Burlington and Quincy 2-8-2 No. 4960 and Ex-LS&I 2-8-0 No. 29. However, 2007 was also the year the GCRY first became a subsidiary of Xanterra Travel Collection, and they started growing concerns over steam locomotives in terms of fuel costs and environmental hazards. Thus, they ceased steam operations in late 2008. Beginning in 2009, however, they brought back steam operations with Numbers 29 and 4960 being converted to Vegetable oil fuel, and they are limited on when they could run. [10] Despite steam operations still present on the GCRY, No. 539’s rebuild there fell through, since the project on the locomotive was deemed to be too expensive, and two operational steam locomotives was considered to be enough. No. 539 sat idle by the GCRY's locomotive shops until early 2014, when the GCRY gave No. 539 a partial cosmetic restoration to improve its overall appearance as a static display, and then it was put on static display on the platform of the Williams Depot. [11]

In 2014, the Port of Kalama opened an Interpretive Center, and they planned to place a NP steam locomotive inside as an icon that Kalama was created by the NP. However, there are only 20 locomotives from the NP left to survive, and none of them were available at that time. [12] In late 2019, the Port of Kalama approached the GCRY, who agreed to sell No. 539 for shipment back to the Pacific Northwest. On January 23, 2020, No. 539 was separated into flatcars to leave Williams almost the same way it left Battle Ground in 2007. [13] [14] The following day, the 1,200 mile journey began, and on March 18, the locomotive arrived at Kalama. As it was unloaded, the boiler was re-attached to the frame and running gear once again. [15] The locomotive was placed on extended rail and pushed inside the interpretive center without incident. As of 2022, No. 539 is still being given another cosmetic restoration inside the interpretive center. Although, the building is wide enough to fit the locomotive itself inside, it can't fit the locomotive and the tender together. Thus, the tender is being displayed just outside on the extended rail, with plans for a small rooftop to be built over it. As of 2023, No. 539 remains on static display inside the interpretive center at the Port of Kalama, where "Rail meets Sail".

See also

Related Research Articles

<span class="mw-page-title-main">Lamont, Washington</span> Town in Washington, United States

Lamont is a town in Whitman County, Washington, United States. The population was 70 at the 2010 census.

<span class="mw-page-title-main">4-8-4</span> Locomotive wheel arrangement

Under the Whyte notation for the classification of steam locomotives, 4-8-4 represents the wheel arrangement of four leading wheels on two axles, eight powered and coupled driving wheels on four axles and four trailing wheels on two axles. The type was first used by the Northern Pacific Railway, and initially named the Northern Pacific, but railfans and railroad employees have shortened the name since its introduction. It is most-commonly known as a Northern.

<span class="mw-page-title-main">Spokane, Portland and Seattle Railway</span> Defunct American Class I railroad (1908–1970)

The Spokane, Portland & Seattle Railway was a railroad in the northwest United States. Incorporated in 1905, it was a joint venture by the Great Northern Railway and the Northern Pacific Railway to build a railroad along the north bank of the Columbia River. The railroad later built or acquired other routes in Oregon. The SP&S was merged into the Burlington Northern in March, 1970. Remnants of the line are currently operated by BNSF Railway and the Portland and Western Railroad.

<i>North Coast Limited</i> Former named passenger train

The North Coast Limited was a named passenger train operated by the Northern Pacific Railway between Chicago and Seattle via Bismarck, North Dakota. It started on April 29, 1900, and continued as a Burlington Northern Railroad train after the merger on March 2, 1970 with Great Northern Railway and the Chicago, Burlington and Quincy Railroad. The next year, it ceased operations after the trains which left their originating stations on April 30, 1971, the day before Amtrak began service, arrived at their destinations.

<span class="mw-page-title-main">Santa Fe 2926</span> Preserved Santa Fe 2900 class 4-8-4 locomotive

Atchison, Topeka and Santa Fe 2926 is a class "2900" 4-8-4 type steam locomotive built in May 1944 by the Baldwin Locomotive Works for the Atchison, Topeka & Santa Fe Railway (ATSF). It was used to pull passenger and fast freight trains, mostly throughout New Mexico, until it was retired from revenue service in 1953. Three years later, it was donated to Coronado Park in Albuquerque for static display.

<span class="mw-page-title-main">Southern Pacific 4449</span> Preserved SP GS-4 class 4-8-4 locomotive in Portland, Oregon

Southern Pacific 4449, also known as the Daylight, is the only surviving example of Southern Pacific Railroad's "GS-4" class of 4-8-4 "Northern" type steam locomotives and one of only two GS-class locomotives surviving, the other being "GS-6" 4460 at the National Museum of Transportation in St. Louis, Missouri. GS is an abbreviation of "General Service" or "Golden State," a nickname for California.

<span class="mw-page-title-main">Southern Pacific 2472</span> Preserved SP P-8 class 4-6-2 locomotive

Southern Pacific 2472 is a P-8 Class 4-6-2 heavy "Pacific" type steam locomotive built by the Baldwin Locomotive Works for Southern Pacific Railroad (SP) in 1921. No. 2472 is one of three surviving Southern Pacific P-8 class 4-6-2 Pacific locomotives, the other two bring Nos. 2467 and 2479. The 4-6-2 designation means it has four leading wheels, six driving wheels, and two trailing wheels. The locomotive was used by the Southern Pacific Railroad to haul passenger trains until being retired in 1957. The locomotive was then donated to San Mateo County and placed on static display at the San Mateo County Fairgrounds. After being restored to operational condition in the early 1990s, the locomotive would pull excursion trains on the Niles Canyon Railway until being retired in 2015. The No. 2472 was then moved to the Northwest Pacific Railroad, where it is as of 2023, undergoing its Federal Railroad Administration (FRA) mandated 1,472 day inspection and overhaul.

<span class="mw-page-title-main">Southern Pacific 2479</span> Preserved SP P-10 class 4-6-2 locomotive

Southern Pacific 2479 is one of six 4-6-2 heavy "Pacific" type steam locomotives built by Baldwin Locomotive Works in 1923 for the Southern Pacific Railroad (SP), designated the P-10 class. No. 2479 was retired from service in 1956. The locomotive is currently undergoing restoration to operating condition by the Pacific Locomotive Association at Brightside, California.

<span class="mw-page-title-main">Spokane, Portland and Seattle 700</span> Preserved American 4-8-4 steam locomotive

Spokane, Portland & Seattle 700 is the oldest and only surviving example of the class "E-1" 4-8-4 "Northern" type steam locomotive and the only surviving "original" Spokane, Portland and Seattle Railway steam locomotive. It was built by the Baldwin Locomotive Works in May 1938. Nearly identical to the class "A-3" Northerns built for Northern Pacific Railway, it burns oil instead of coal.

<span class="mw-page-title-main">Southern Pacific 745</span> Preserved SP MK-5 class 2-8-2 locomotive

Southern Pacific 745 is a preserved Mikado-type steam locomotive that was fabricated at the Southern Pacific Railroad's Algiers Shops at Algiers Point directly across the Mississippi River from New Orleans. With a 2-8-2 wheel configuration, 745 was built as a freight engine for the Southern Pacific Railroad Company. The locomotive returned to service in 2004 after a restoration period and is now housed on a short spur line in suburban Jefferson Parish. It is currently the only operating steam locomotive in Louisiana.

On the American Spokane, Portland and Seattle Railway, locomotive number 525 was the only steam locomotive in SP&S class O-2. It was originally built for Northern Pacific by the Schenectady Locomotive Works. Builders number 46878 was built in February 1910.

<span class="mw-page-title-main">Oregon Railroad and Navigation 197</span> Preserved 4-6-2 locomotive in Portland, Oregon

Oregon Railroad and Navigation Co. 197 is a 4-6-2 "Pacific" type steam locomotive built by the Baldwin Locomotive Works in 1905 for the Oregon Railroad and Navigation Company (OR&N). Since the OR&N was controlled by E.H. Harriman at the time, this locomotive bears a strong resemblance to Southern Pacific locomotives of the same era, since the Southern Pacific was another E.H. Harriman controlled railroad. It has been owned by the City of Portland since 1958, and since mid-2012 it resides at the Oregon Rail Heritage Center where it can be viewed by the public.

<span class="mw-page-title-main">Oregon Rail Heritage Center</span> Railway museum in Oregon, U.S.

The Oregon Rail Heritage Center (ORHC) is a railway museum in Portland, Oregon. Along with other rolling stock, the museum houses three steam locomotives owned by the City of Portland: Southern Pacific 4449, Spokane, Portland & Seattle 700, and Oregon Railroad & Navigation Co. 197, the first two of which are restored and operable. The center opened to the public on September 22, 2012. The project to establish the center was led by the Oregon Rail Heritage Foundation (ORHF), a non-profit organization, which was renamed from the Oregon Heritage Steam Foundation in 2002. The non-profit Oregon Steam Heritage Foundation was formed in 2000. The museum site is in Southeast Portland.

<span class="mw-page-title-main">Grand Canyon Railway 4960</span> Preserved American CB&Q O-1a class 2-8-2 locomotive

Grand Canyon Railway 4960 is a preserved O-1A class 2-8-2 "Mikado" type steam locomotive built in August 1923 by the Baldwin Locomotive Works for the Chicago, Burlington and Quincy (CB&Q) Railroad. It was used by the CB&Q to pull freight trains, until 1958, when the locomotive pulled its first excursion fantrip, as part of the railroad's steam excursion program.

The Great Northern O-1 was a class of 145 2-8-2 "Mikado"-type steam locomotives built by the Baldwin Locomotive Works between 1911 and 1919 and used by the Great Northern Railway until the late 1950s.

<span class="mw-page-title-main">Grand Canyon Railway 29</span> Preserved American 2-8-0 locomotive

Grand Canyon Railway No. 29 is an SC-3 class 2-8-0 "Consolidation" type steam locomotive, built by ALCO's Pittsburgh Works in 1906 for the Lake Superior and Ishpeming Railroad (LS&I) in Upper Michigan. The locomotive was originally numbered 14, but it was renumbered to 29 in 1924. Having gone through two major rebuilds to upgrade its performance, No. 29 served the LS&I in pulling freight and iron ore trains until being retired in 1956.

<span class="mw-page-title-main">Lake Superior and Ishpeming 18</span> Preserved American 2-8-0 locomotive (LS&I class SC-4)

Lake Superior and Ishpeming Railroad No. 18 is an SC-4 class 2-8-0 “Consolidation” type steam locomotive, built by ALCO’s Pittsburgh Works in 1910 for the Lake Superior and Ishpeming (LS&I) Railroad in Upper Michigan. Originally numbered 11, the locomotive was renumbered to 18 in 1924, and it served the railroad, until it discontinued steam operations in 1962. No. 18 was subsequently sold to the Marquette and Huron Mountain tourist railroad, where it was put into storage alongside other steam locomotives.

<span class="mw-page-title-main">Southern Pacific 1744</span> Preserved SP M-6 class 2-6-0 locomotive

Southern Pacific No. 1744 is a preserved American class "M-6" 2-6-0 "Mogul" type steam locomotive built by the Baldwin Locomotive Works for the Southern Pacific Railroad in November 1901. Originally equipped with Vauclain compound cylinders, it was rebuilt with conventional cylinders in 1912. It operated for many years out of Oakland, California on the Southern Pacific's Western Division and in California's Central Valley where the locomotive and its classmates were fondly called “Valley Mallets” by their crews. The locomotive was made famous in later years by pulling some of the last steam excursions on the SP alongside other steam locomotives, including 4-8-4 4460. In 1959, No. 1744 was donated to the Sons of Utah Pioneers in Corinne, Utah where it remained on static display, until 1980. That year, it was restored by New London Railroad and Village Incorporated to operate on the Heber Valley Railroad in Heber City for the rest of the decade.

<span class="mw-page-title-main">Valley Railroad 40</span>

Valley Railroad No. 40 is a preserved 2-8-2 "Mikado" type steam locomotive that was built by Alco in 1920. It was initially built as No. 101 for the Portland, Astoria and Pacific Railroad as part of their small order of locomotives. However, the order was cancelled, and the locomotive was subsequently sold to the Minarets and Western Railway to pull logging trains. No. 101 subsequently went through several ownerships during revenue service, until it was retired in 1950, and by that time, it was renumbered to 40. After spending several years in storage, No. 40 made its way to the Connecticut Valley Railroad in Essex in 1977. As of 2022, No. 40 is being used to pull tourist trains between Essex and Hartford, Connecticut alongside 2-8-0 No. 97 and 2-8-2 No. 3025.

Southern Pacific 786 is a preserved 2-8-2 "Mikado" type steam locomotive that was constructed at the American Locomotive Company's Brooks Works in New York. It was used to pull mainline freight trains by the Texas and New Orleans Railroad, a subsidiary of the Southern Pacific Railroad, until it was removed from service in 1955, and it was donated to the city of Austin, Texas the following year. Beginning in 1989, No. 786 was leased to the Austin Steam Train Association, who restored it to operating condition, and the locomotive was used to pull excursion trains on the Austin Western Railroad until 1999. Since 2000, crews have been performing an extensive rebuild on No. 786 to bring it back to service, and as of 2023, the rebuild continues to progress.

References

  1. ↑ "Northern Pacific 2-8-2 "Mikado" Locomotives in the USA". www.steamlocomotive.com. Retrieved 2021-01-23.
  2. ↑ "Crow Wing County Historical Society - Northern Pacific Railroad In Brainerd". www.crowwinghistory.org. Retrieved 2021-01-23.
  3. ↑ "Spokane, Portland & Seattle 2-8-2 "Mikado" Locomotives in the USA". www.steamlocomotive.com. Retrieved 2021-01-23.
  4. ↑ "SP&S 539 Locomotive How to move in to the park 1957". www.hoghead.com. Retrieved 2021-01-24.
  5. ↑ "Mount Hood Railroad | Scenic Train Rides & Tours in Hood River, OR". Mt. Hood Railroad. Retrieved 2021-01-26.
  6. ↑ "Whistle Stop". www.hoghead.com. Retrieved 2021-01-25.
  7. ↑ "SP&S 539 - Move from Esther Short Park 1997 - YouTube". www.youtube.com. Retrieved 2021-01-25.
  8. ↑ "Grand Canyon Railway". Grand Canyon Railway. Retrieved 2021-01-26.
  9. ↑ "RailPictures.Net Photo: SPS 539 Spokane, Portland & Seattle Steam 2-8-2 at Williams, Arizona by Mitch Goldman". www.railpictures.net. Retrieved 2021-01-26.
  10. ↑ "Grand Canyon Railway Steam - Powered by WVO - YouTube". www.youtube.com. Retrieved 2021-01-26.
  11. ↑ "Grand Canyon Railway #539". Trainorders.com Discussion. Retrieved 2021-01-26.
  12. ↑ "SP&S 539 come full circle: Port of Kalama buys steam locomotive". The Columbian. Retrieved 2021-01-26.
  13. ↑ "Steam locomotive finds new home in Washington | Williams-Grand Canyon News | Williams-Grand Canyon, AZ". www.williamsnews.com. Retrieved 2021-01-26.
  14. ↑ "San Bernardino Railroad Historical Society : NEWS : FROM THE YARD". www.sbrhs.org. Retrieved 2021-01-26.
  15. ↑ Fairbanks, Katie. "Vintage steam locomotive installed in Port of Kalama's museum". Longview Daily News. Retrieved 2021-01-26.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.