Standard Atlas | |
---|---|
Overview | |
Manufacturer | Standard Motor Company Leyland Motors Limited British Leyland Motor Corporation Limited (BLMC) Standard Motors India |
Also called | Standard Atlas Major Standard 15/20 Leyland 15/20 Triumph Atlas [1] |
Production | 1958–1980 |
Assembly | United Kingdom India: Chennai |
Body and chassis | |
Class | Light van |
Related | Standard Pennant Standard Vanguard Utility |
Chronology | |
Predecessor | Standard Vanguard Utility |
Successor | Land Rover Series IIA Forward Control and Morris 250 JU (British Leyland models) |
The Standard Atlas is a light van which was produced and sold under various names between 1958 and 1980, initially in Britain and Europe, and subsequently in India. [2]
In 1958 Standard presented the Atlas, their contender in the growing but (in Britain) increasingly crowded small van sector. It was a competitor for BMCs venerable J-Type and the much more modern Morris J2, as well as for the Ford Thames 400E, Commer FC and the market leading Bedford CA. For some export markets, notably Canada and the U.S. the Standard Atlas was badged as a Triumph, reflecting the value of the brand recognition achieved for the Triumph by their sedans and sports models.
Light vans in Britain were at this time frequently identified by their maximum permissible gross payload, and the Atlas was often advertised simply as the Atlas 10 cwt or the Atlas 12 cwt, reflecting allowable load weights (including a driver) of 510 or 610 kg. In addition to the panel van, a pick up truck version was offered. Both hinged doors and sliding doors were offered as was a middle side door. There was also a small flatbed truck version which had rear hinged doors.
Like its competitors, the Atlas shared its engine with a passenger car from its manufacturer's range. In this case the engine in question was firstly the 948 cc (57.9 cu in) petrol engine from the Standard Ten, which was installed under a cowling between the driver and passenger, and delivered power to the rear wheels, although certain parts came from the Standard Vanguard Utility. In this form the van was very slow. That was addressed in 1961 when it became possible to specify the van with a 1,670 cc (102 cu in) petrol. The larger dimensions of this engine meant that the chassis had to be enlarged and the cabin design rearranged. At the same time the smaller engine was enlarged to 1,147 cc (70.0 cu in).
Around 1960 new versions with payload limits raised to 15 cwt (760 kg gross) and 20 cwt (1,020 kg gross) were introduced. These heavier-duty models were provided with the Standard 2,138 cc (130.5 cu in) petrol engine that also powered the Triumph TR4. It was also possible to order the 15/20 cwt vans with a diesel engine. [2] The unit in question was a 2,260 cc (138 cu in)60 hp (45 kW) Leyland OE.138 unit of Massey Ferguson origins; this was also installed in tractors and industrial machinery. [3] Freeman Sanders had developed the diesel engine and it was manufactured by Standard Motors.
After the Standard Company was merged into Leyland Motors in 1961, the Atlas vans' badging was changed to Leyland 15 and Leyland 20 in 1962.
In 1963 Standard was acquired by Leyland Motors Limited and for 1964, the van was renamed Leyland 15 / Leyland 20 (according to capacity).
In 1968, Leyland merged with the British Motor Corporation to form the British Leyland Motor Corporation, and the van was taken out of production in order to avoid direct competition with a range of vans such as the Morris JU 250, now produced by the same company.
After production of the van in the United Kingdom had ended, the tooling and panel presses were exported to southern India where the van re-emerged, to be produced, between 1970 and 1980 by Standard Motors of Chennai.
The Standard Motor Company Limited was a motor vehicle manufacturer, founded in Coventry, England, in 1903 by Reginald Walter Maudslay. For many years, it manufactured Ferguson TE20 tractors powered by its Vanguard engine. All Standard's tractor assets were sold to Massey Ferguson in 1959. Standard purchased Triumph in 1945 and in 1959 officially changed its name to Standard-Triumph International and began to put the Triumph brand name on all its products. A new subsidiary took the name The Standard Motor Company Limited and took over the manufacture of the group's products.
Commer was a British manufacturer of commercial and military vehicles from 1905 until 1979. Commer vehicles included car-derived vans, light vans, medium to heavy commercial trucks, and buses. The company also designed and built some of its own diesel engines for its heavy commercial vehicles.
The Mazda Bongo, also known as Mazda E-Series, Eunos Cargo, and the Ford Econovan, is a cabover van and pickup truck manufactured by the Japanese automobile manufacturer Mazda since 1966. The Bongo name was also used for the Bongo Friendee, which is not a cabover design.
The Thames Trader was a range of trucks manufactured by Ford UK built between 1957 and 1965.
Bedford Vehicles, usually shortened to just Bedford, was a brand of vehicle manufactured by Vauxhall Motors, then a subsidiary of multinational corporation General Motors. Established in April 1931, Bedford Vehicles was set up to build commercial vehicles. The company was a leading international lorry brand, with substantial export sales of light, medium, and heavy lorries throughout the world.
The LDV Pilot was the last of a series of a panel vans that was produced by from 1974 until 2005, originally as the 1974 Leyland Sherpa developed by the Austin-Morris division of British Leyland, which was in turn derived from earlier light commercials produced by the British Motor Corporation.
In 1977 Daimler-Benz introduced a new van/truck, called Mercedes-Benz T1 internally. Other designations were series TN and Bremer Transporter, since the vehicle was built in the Transporter-Plant in Bremen, Germany, first. In the years 1983/1984 production went - piece by piece - to the Transporter-Plant-Düsseldorf. The internal chassis-designations are: 601, 602 and 611.
The Mitsubishi Fuso Canter is a line of light-duty commercial vehicles manufactured by Mitsubishi Fuso Truck and Bus Corporation, part of Daimler Truck, subsidiary of Mercedes-Benz Group. The Canter is manufactured since 1963, now in its eighth generation. The Canter is named after the English word describing the gait of a horse, emphasising the 'thoroughbred' nature of Mitsubishi trucks.
The Morris Commercial J4 is a 10 cwt forward-control van launched by Morris Commercial in 1960 and produced with two facelifts until 1974.
The Isuzu Elf is a medium duty truck produced by Isuzu since 1959. Outside Japan it is known as N series and Q Series. The range was originally mainly available in Japan and other Asian countries. Australia was another important market for the Elf and N series – to the extent that it was manufactured there from the 1970s using many local components. Since the early 1980s, it has also been sold and built in the United States, and also as the Isuzu N-Series. Only North America receives the wide-cab version.
The Nissan Atlas is a series of pickup trucks and light commercial vehicles manufactured by Nissan. It is built by UD Trucks for the Japanese market, and by the Renault-Nissan Alliance for the European market. The lighter range vehicles, weighing from 1 to 1.5 tons, replaced the earlier Cabstar and Homer (F20), while the heavier Caball and Clipper (C340) were replaced by the 2-to-4 ton range Atlas. The Atlas nameplate was first introduced in December 1981, available at Nissan Bluebird Store locations.
The Standard Vanguard is a car which was produced by the Standard Motor Company in Coventry, England, from 1947 until 1963.
The Ford Thames 400E is a commercial vehicle that was made by Ford UK and introduced in 1957. Production of the range continued until September 1965, by which time a total of 187,000 had been built. Publicity for the model included hiring the Cy Laurie band to make the promotional film short 'Band Wagon', in 1958, preserved in the 'Ford Film and Video Collection' at the National Motor Museum, Beaulieu
The Bedford CF is a range of full-size panel vans produced by Bedford - the commercial vehicles division of Vauxhall. The van was introduced in 1969 to replace the CA model, and was sized to compete directly with the Ford Transit, which had entered production four years earlier. Its design was similar to its American counterpart, the Chevrolet Van (1971–1995).
The Morris 250 JU was a forward control light van launched by Morris Commercial in October 1967. It was offered with the familiar B series petrol engine in 1,622 cc (99.0 cu in) form. Claimed power output was 49 bhp, with a compression ratio of 7.2:1.
The Nissan Caball is a light commercial truck manufactured by Nissan Motors from December 1957 until December 1981. The Caball was mainly sold in Japan, Hong Kong, South East Asian countries, Australia, New Zealand, and few European countries and shared the Nissan Junior platform. While the Caball name came to an end in 1981 with the cancellation of the Junior, its larger replacement received the Nissan Atlas name in the domestic Japanese market. These are 2–4 ton trucks, the lighter versions in the Atlas truck range took over after the lesser Cabstar/Homer. In Japan, it was available at Nissan Store locations and replaced by the Nissan Atlas.
The Toyota FA and BA were heavy duty trucks introduced in February 1954. They were facelifted versions of the earlier BX/FX trucks, retaining those trucks Type B and Type F six-cylinder petrol engines. The first letter in the model name indicates the engine family fitted; in 1957 the Type D diesel engine was introduced in a model known as the DA. The second letter indicated the size of the truck, with shorter medium duty versions being coded BC/FC/DC. A second letter "B" was used on bus versions of this chassis. A second generation FA/DA was introduced in 1964 and was built in Japan until 1980, when Hino replaced Toyota's heavier truck lines entirely. The DA, however, was also built in numerous other countries and manufacture continued into the first decade of the 21st century.
The Austin D and K series engines are a straight-six engine made by the British Austin Motor Company between 1939 and 1968. It was developed for the lorry market, but used in a number of automobiles in its later life. It was an overhead valve non-crossflow cylinder head design. Both block and head were made out of cast iron. All engines had a forged four main bearing crankshaft.
The Morris WE/Austin S203/S403/S503 was a bonneted truck produced by the British Motor Corporation from 1955. After a revision in 1964, it was marketed as the Morris WF/Austin S303/S403/S503 and from 1968 as the BMC WF. In the export markets, the Austin model was usually called the Morris, WE/WF. After BMC merged with Leyland Motors to form the British Leyland Motor Corporation, it was produced as the Leyland WF from 1970 to 1981 and replaced by the Leyland Landmaster.
The Leyland OE engine (OE.138/OE.160) is a diesel, pushrod (OHV) straight-four engine based on the Standard 23C design and redesigned by Leyland Motors subsequent to their 1961 takeover of Standard-Triumph. Intended for light trucks and commercials, tractors, and industrial usage, the engine was available in either high speed and low speed designs, in two different displacements. The name means "Oil Engine", followed by the displacement in cubic inches. It was built from 1961 until the late 1960s.