Standard Ten

Last updated

A 1934 Standard 10/12 Speedline 1934-Standard10-1237.jpg
A 1934 Standard 10/12 Speedline

The Standard Ten was a model name given to several small cars produced by the British Standard Motor Company between 1906 and 1961. The name was a reference to the car's fiscal horsepower or tax horsepower, a function of the surface area of the pistons. This system quickly became obsolete as an estimate of the power produced by the engine, but it continued to be relevant as a way to classify cars for tax purposes. Like other manufacturers, Standard continued to use the name to define the approximate size of their 'Ten' model long after the origins of the name had, in Britain, become inapplicable.

Contents

An experimental two-cylinder "10" was made in 1906, after which Standard's next car in that category was a four-cylinder 9.5 tax horsepower built between 1914 and 1919. They returned to the 10 tax horsepower market in 1934; this model was replaced in 1937 by a "Flying Ten" that lasted until the outbreak of World War II.

Standard again returned to the 10 tax horsepower market in 1954 with another Ten, which was supplemented in 1957 by an up-market version called the Pennant. The Ten and the Pennant were replaced by the Triumph Herald in 1961.

Edwardian 10 hp cars

Standard 9.5 hp [1]
Overview
ManufacturerStandard Motor Company
Production1914–1915, 1919
Layout FR
Powertrain
Engine inline four side-valve engine
1914–1915: 1087 cc
1919: 1328 cc
Dimensions
Wheelbase 1914–1915: 2,286 mm (90 in)
1919: 2,336.8 mm (92 in)
Length1914–1915: 3,200 mm (126 in)
1919: 3,277 mm (129 in)
Chronology
Successor1934 Standard 10 hp

The name was first used in 1906 on an experimental two-cylinder 10 tax horsepower car. [2] The side-valve [ citation needed ] engine had a 70 mm bore and an 82 mm stroke, giving a capacity of 631 cc. [1]

A 9.5 tax horsepower four-cylinder car was introduced in 1914 and built until 1915. A version of this car, with increases in wheelbase and engine stroke, was offered in 1919. [1]

10 hp (1934–1936)

Standard 10 hp [3]
1933.standard.10.arp.jpg
Overview
ManufacturerStandard Motor Company
Production1934–1936
Layout FR
Powertrain
Engine 1343 cc inline four side-valve engine
Dimensions
Wheelbase base: 2,311 mm (91 in)
optional: 2,388 mm (94 in)
Chronology
Predecessor1919 Standard 9.5 hp
Successor1934 Standard 10 hp

Flying Ten

Standard Flying Ten
Overview
Production1937–1939 [3]
Body and chassis
Body style saloon
2 door coupe utility [4]
Powertrain
Engine 1267 cc Inline-four engine [3]
Transmission Three speed manual
Dimensions
Wheelbase 90 in (2,286 mm) [3]
Length152 in (3,861 mm) [3]
Width56.5 in (1,435 mm) [3]

The Flying Ten was a replacement for the earlier Ten with the semi-streamlined look of the Standard Flying range. The side-valve 1267 cc long stroke (100 mm) engine had a single Zenith carburettor and could produce 33 bhp (25 kW) at 4000 rpm. [3] Drive was to the rear wheels through a 3-speed synchromesh gearbox. The suspension was conventional at first with a solid front axle but this was upgraded to an independent set-up at the front with a transverse leaf spring in 1939. A top speed of around 65 mph (105 km/h) was attainable. Brakes were cable operated using the Bendix system. In early 1941, 150 four-doors were built for the military, after civilian production had ceased.

A sportier version, the Light Flying Ten was also made.

Post-war models

Standard Ten
1954 Standard Ten.jpg
1954 Standard Ten Saloon
Overview
Also calledStandard Companion (estate)
Standard 6 cwt (van & pickup) [5]
Standard Cadet (Australia) [6]
Standard Vanguard Junior (Sweden)
Triumph TR-10 (United States) [7]
ProductionMay 1954 [8] –1960
172,500 made [9]
Assembly United Kingdom
Australia [10]
India
Body and chassis
Body style 4-door saloon
4-door estate car
2-door coupe utility [5]
2-door panel van [5]
Powertrain
Engine 948 cc OHV I4 [11]
Transmission Four speed manual
optional overdrive
Dimensions
Wheelbase 84 in (2,134 mm) [11]
Length144 in (3,658 mm) [11]
Width60 in (1,524 mm) [11]
Height60 in (1,524 mm) [12]

In 1954 the Ten was introduced as a more powerful, better-appointed version of the Standard Eight, with the Eight's Standard SC engine increased in size to 948 cc and sharing a similar frame and transmission. Overdrive (from March 1957) or a temperamental semi-automatic were available as options.

An estate (station wagon) version, the Companion, was launched in June 1955. [8] It was among the first small British estate cars to have rear-passenger doors (like the saloon, and unlike its rivals such as the Ford Squire and Hillman Husky which used the two-door "van" arrangement).

A small number of left-hand-drive Tens were exported to the US and sold as the Triumph TR-10. On these, the two-tone colour arrangement normally reserved for the Pennant was available (though this export model was not tailfinned).

A Ten saloon tested by the British magazine The Motor in 1954 had a top speed of 69.0 mph (111.0 km/h) and could accelerate from 0-60 mph (97 km/h) in 38.3 seconds. A fuel consumption of 34.4 miles per imperial gallon (8.2 L/100 km; 28.6 mpgUS) was recorded. The test car cost £580 including taxes. [13]

In 1955, supported by an inscrutable handicapping régime favouring small cars, a factory-prepared Standard Ten, driven by Jimmy Ray and Brian Horrocks, won the UK's RAC Rally. [14]

For the United States export market the car was badged as the Triumph 10 [7] and in Scandinavia it was sold as the Standard Vanguard Junior. In Australia the Ten was known as the Cadet. [15]

Standard Pennant

Standard Pennant
Standard Pennant.jpg
Overview
Production1957–1960
42,910 made [9]
Body and chassis
Body style saloon, estate
Related Standard Atlas
Powertrain
Engine 948 cc Straight-4 OHV [11]
Transmission Four speed manual
optional overdrive
Dimensions
Wheelbase 84 in (2,134 mm) [11]
Length142 in (3,607 mm) [11]
Width59 in (1,499 mm) [11]
Height60 in (1,524 mm) [16]

A tail-finned (with optional two-tone paint schemes) version of the Ten, the Standard Pennant was launched in October 1957. Engine power was increased to 37 bhp [9] and an overdrive gearbox was offered as an option. other options included a radio, heater, leather upholstery and clutchless two-pedal control. Indian-produced Pennants were branded as "Standard 10", and lacked any bootlid trim other than the branding.

A Pennant tested by British magazine The Motor in 1958 had a top speed of 70.2 mph (113.0 km/h) and could accelerate from 0-60 mph (97 km/h) in 35.3 seconds. A fuel consumption of 40.2 miles per imperial gallon (7.03 L/100 km; 33.5 mpgUS) was recorded. The test car cost £728 including taxes of £243. [16]

A 1957 Pennant StandardPennantVJY401.jpg
A 1957 Pennant

Related Research Articles

<span class="mw-page-title-main">Standard Motor Company</span> British motor vehicle manufacturer

The Standard Motor Company Limited was a motor vehicle manufacturer, founded in Coventry, England, in 1903 by Reginald Walter Maudslay. For many years, it manufactured Ferguson TE20 tractors powered by its Vanguard engine. All Standard's tractor assets were sold to Massey Ferguson in 1959. Standard purchased Triumph in 1945 and in 1959 officially changed its name to Standard-Triumph International and began to put the Triumph brand name on all its products. A new subsidiary took the name The Standard Motor Company Limited and took over the manufacture of the group's products.

<span class="mw-page-title-main">Ford Popular</span> Motor vehicle

The Ford Popular, often called the Ford Pop, is a car from Ford UK that was built in England between 1953 and 1962. When launched, it was Britain's lowest priced car.

<span class="mw-page-title-main">Ford Consul</span> Motor vehicle

The Ford Consul is a car that was manufactured by Ford of Britain from 1951 until 1962. The name was later revived for a model produced by Ford in both the UK and in Germany from 1972 until 1975.

<span class="mw-page-title-main">MG Magnette</span> Motor vehicle

The MG Magnette is an automobile that was produced by MG between 1953 and 1968. The Magnette was manufactured in two build series, the ZA and ZB of 1953 through to 1958 and the Mark III and Mark IV of 1959 through to 1968, both using a modified Wolseley body and an Austin engine.

<span class="mw-page-title-main">Wolseley 4/50</span> Motor vehicle

The Wolseley 4/50 and similar 6/80 were Wolseley Motors' first post-war automobiles. They were put into production in 1948 and were based on the Morris Oxford MO and the Morris Six MS respectively. The 4-cylinder 4/50 used a 1476 cc 50 hp version of the 6/80 engine, while the 6/80 used a 2215 cc 72 hp straight-6 single overhead cam.

<span class="mw-page-title-main">Triumph TR</span> Motor vehicle

The Triumph TR range of cars was built between 1953 and 1981 by the Triumph Motor Company in the United Kingdom. Changes from the TR2 to the TR6 were mostly evolutionary, with a change from a live axle to independent rear suspension in 1965 and a change from a four-cylinder engine to a six-cylinder engine in 1967. An all-new TR7, with a unit body, an overhead camshaft four-cylinder engine, and a live rear axle, was introduced in late 1974. The TR8, a development of the TR7 with a Rover V8 engine, was introduced in 1979 and was sold alongside the TR7 until TR production ended.

<span class="mw-page-title-main">Ariel Motorcycles</span>

Ariel Motorcycles was a British maker of bicycles and then motorcycles in Bournbrook, Birmingham. It was an innovator in British motorcycling, part of the Ariel marque. The company was sold to BSA in 1951 but the brand survived until 1967. Influential Ariel designers included Val Page and Edward Turner. The last motorcycle-type vehicle to carry the Ariel name was a short-lived three-wheel tilting moped in 1970.

<span class="mw-page-title-main">Standard Vanguard</span> Motor vehicle made in England

The Standard Vanguard is a car which was produced by the Standard Motor Company in Coventry, England, from 1947 until 1963.

The Rover 8 was a small single-cylinder 8 hp 1327 cc car made by the British Rover car company. It was Rover's first production car. It was remarkable for being supported by a backbone chassis rather than a conventional ladder frame. The first model was manufactured from 1904 to 1912. A Daimler-Knight sleeve valve engine option was available on the original model in 1911 and 1912.

<span class="mw-page-title-main">Triumph Dolomite (1934–1940)</span> Motor vehicle

The Triumph Dolomite is a car that was produced by Triumph Motor Company from 1934 to 1940. It first appeared in 1934 as a sports car and the name was also used from 1937 on a series of sporting saloons and open cars until 1939 when the company went into receivership. A number were still sold and registered in 1940, though it is uncertain whether the receiver or new owner turned out cars from spare parts, or sold off completed cars. All except the Straight 8 featured a "waterfall" grille styled by Walter Belgrove, versions of the saloons with conventional grilles were sold as Continental models.

<span class="mw-page-title-main">Triumph Mayflower</span> Motor vehicle

The Triumph Mayflower is a British four-seat 1+14-litre small luxury car noted for its razor-edge styling. It was built by the Standard Motor Company and sold by Standard's subsidiary, The Triumph Motor Company. It was announced at the October 1949 British International Motor Show, but deliveries did not commence until the middle of 1950.

<span class="mw-page-title-main">Jowett Bradford</span> Motor vehicle

The Jowett Bradford was a British light van produced from 1946 to 1953 by Jowett Cars Ltd of Idle, near Bradford, England. It was also available as an estate car from 1947 to 1953.

<span class="mw-page-title-main">Standard Eight</span> Motor vehicle made in England

The Standard Eight is a small car produced by the British Standard Motor Company from 1938 to 1959.

The Triumph 20TS was a prototype sports car shown by Standard-Triumph in October 1952 at the London Motor Show. Extensive development of the 20TS led to the introduction of the Triumph TR2 in March 1953 at the Geneva Motor Show, after which the 20TS was unofficially referred to as the Triumph TR1. Only one example of this car was ever made by Triumph.

<span class="mw-page-title-main">Vauxhall Wyvern</span> Motor vehicle

The Vauxhall Wyvern is a medium-sized family car introduced by Vauxhall in 1948 as a successor to the Vauxhall 12. The name comes from the mythical beast the wyvern, and may be due to a misidentification of the heraldic griffin on the Vauxhall badge.

<span class="mw-page-title-main">Triumph Renown</span> Motor vehicle made in England

The Triumph Renown is strictly the name given to the Triumph's large saloon car made from 1949 to 1954 but it is, in reality, part of a three-car series of the 1800, 2000 and Renown models. Together with the Triumph Roadster, they were the first vehicles to carry the Triumph badge following the company's takeover by the Standard Motor Company.

<span class="mw-page-title-main">Triumph I6</span> Motor vehicle engine

The Triumph Six Cylinder or Triumph I6 engine is a cast-iron overhead valve straight-six engine produced by Standard Triumph. It is an evolution of the Standard Motor Company's inline-4 Standard Eight, with the addition of two cylinders and a larger displacement.

<span class="mw-page-title-main">Standard wet liner inline-four engine</span> Motor vehicle engine

The Standard wet liner inline-four engine was an inline four cylinder petrol engine produced by the Standard Motor Company. Originally developed concurrently for passenger car use and for the Ferguson TE20 tractor, it was widely used for Standard passenger cars of the 1950s, most notably the Vanguard. Later it was successfully used in Standard's popular early generation Triumph TR series sports cars.

<span class="mw-page-title-main">Morris Oxford MO</span> Motor vehicle

Morris Oxford Series MO is an automobile produced by Morris Motors of the United Kingdom from 1948 to 1954. It was one of several models to carry the Morris Oxford name between 1913 and 1971.

<span class="mw-page-title-main">Morris Oxford Series II</span> Motor vehicle

Morris Oxford is a series of motor car models produced by Morris Motors of the United Kingdom, from the 1913 bullnose Oxford to the Farina Oxfords V and VI.

References

Footnotes
  1. 1 2 3 Culshaw & Horrobin 2013, p. 282.
  2. Culshaw & Horrobin 2013, p. 281.
  3. 1 2 3 4 5 6 7 Culshaw & Horrobin 2013, p. 284.
  4. 1940 Standard Flying 10 Utility, www.justcars.com.au, as archived at web.archive.org
  5. 1 2 3 British commercial brochures Retrieved on 28 October 2011
  6. Standard Eight Has 'Big Brother', The Advertiser, Thursday 9 September 1954, page 20, as archived at trove.nla.gov.au
  7. 1 2 The Standard 10, vintagetriumphregister.org Retrieved 24 March 2017
  8. 1 2 "Standard 8's and 10's Commission Numbers". Standard Motor Club. Archived from the original on 20 February 2012.
  9. 1 2 3 Robson 2006 , p. [ page needed ]
  10. Australian Motor Industries (AMI) The Start Retrieved on 30 March 2012
  11. 1 2 3 4 5 6 7 8 Culshaw & Horrobin 2013, p. 287.
  12. "Second Hand car guide supplement". Practical Motorist. 6 Nbr 68: between pages 768 & 769. April 1960.
  13. "The Standard Ten". The Motor . 4 August 1954.
  14. Robson 1977, pp. 40–41.
  15. Homer, Phil. "8's and 10's". Standard Motor Club. Archived from the original on 20 February 2012.
  16. 1 2 "The Standard Pennant". The Motor . 10 September 1958.
Bibliography