Triumph Mayflower | |
---|---|
Overview | |
Manufacturer | Standard Motor Company |
Production | 1949–1953 35,000 were made [1] |
Assembly | Coventry, England Port Melbourne, Australia Nyköping, Sweden (ANA) [2] |
Body and chassis | |
Body style | 2-door saloon 2-door drophead coupé 2-door coupé utility (Australia) |
Powertrain | |
Engine | 1,247 cc (76.1 cu in) side-valve I4 [3] |
Transmission | 3-speed manual [3] |
Dimensions | |
Wheelbase | 84 in (2,134 mm) [4] [5] |
Length | 156 in (3,962 mm) [4] |
Width | 62 in (1,575 mm) [4] |
Height | 60 in (1,524 mm) [6] |
Chronology | |
Successor | Standard 8/Triumph Herald |
The Triumph Mayflower is a small, upscale family car built from 1949 until 1953 by the British Standard Motor Company and sold by their Triumph Motor Company subsidiary. It has a 1+1⁄4-litre engine and was noted for its razor-edge styling. It was announced at the October 1949 British International Motor Show, but deliveries did not commence until the middle of 1950.
One of the nine prototype Triumph Mayflowers, "X488", was factory tested 5000 miles across Europe in 1950, where they used the famous rooftop test track of Impéria Automobiles in Belgium.
The Mayflower's "upscale small car" position did not find a ready market, and sales did not meet Standard's expectations. The company's next small car, the Standard Eight of 1953, was a basic 0.8-litre economy car.
The Mayflower used a version of the pre-war Standard Flying Ten's [7] [8] side-valve engine updated with an aluminium cylinder head [3] and single Solex carburettor. [4] The engine developed 38 bhp (28 kW) [3] [4] at 4200 rpm. [4] The 3-speed gearbox, with column shift, came from the Standard Vanguard [7] and had synchromesh on all the forward ratios. [9] There was independent suspension at the front [4] [7] using coil springs and telescopic dampers, [4] [10] but a solid axle with semi-elliptic leaf springs, [4] also based on the Vanguard's design,[ citation needed ] was at the rear. Lockheed hydraulic brakes were fitted. [9]
The Mayflower was the first car with unitary construction to be manufactured either by Standard or by the Triumph company that existed before Standard bought its assets. The body was designed by Leslie Moore, chief body designer of Mulliners of Birmingham with input from Standard's Walter Belgrove. The body shells were built by Fisher and Ludlow at Castle Bromwich, Birmingham. [8] [11]
The Mayflower had traditional "razor edge" styling similar to that of the Triumph Renown, imitating the style then still used by Bentley and Rolls-Royce cars. [8] [12] [13] Standard's managing director Sir John Black believed this would be especially appealing to the American market. One advantage of the car's upright styling was that it could seat four people in comfort despite its small size, [12] although there were complaints about the rear seat being constrained by the rear axle and being too narrow as a result. [14]
Ten drophead coupés were built in 1950. [1] [3]
Standard Motor Company (Australia) Limited produced a coupé utility variant of the Mayflower at their Port Melbourne plant in Victoria, Australia. 150 examples were built from Mayflower Saloon CKD kits imported from the United Kingdom, with bodywork locally modified to form a rear load area to which a timber floor and side panels were added. [15] The Utility was introduced in 1952. [16]
A Mayflower tested at Brooklands racing circuit, by British magazine The Motor in 1950 had a top speed of 62.9 mph (101.2 km/h) and could accelerate from 0–50 mph (80 km/h) in 26.6 seconds. A fuel consumption of 28.3 miles per imperial gallon (10.0 L/100 km; 23.6 mpg‑US) was recorded.
The Motor's test car cost £505 including taxes. The 1250 cc, 914 kg Mayflower was in a different market from the same year's 803 cc, 775 kg, less well equipped and more aggressively priced Morris Minor advertised at £382. [17] The MSRP in the US was $1750, [18] more than the $1629 asked for a basic 2-door Chevrolet [19] and almost 80% more than a similarly sized, powered and engineered Ford Anglia offered at a rock-bottom $948. [20]
The Mayflower was announced and displayed for the first time on 28 September 1949, the first day of the Earls Court Motor Show. [21] Deliveries, including complete knock down (CKD) kits for overseas markets, began in the middle of 1950. [7] [22]
Despite its low performance, the Mayflower impressed automobile testers, including Tom McCahill from Mechanix Illustrated [8] and The Scribe from Autocar . [23]
The Mayflower had been an attempt to create a small car with an upmarket image, [5] but it failed to meet its sales targets. [3] Standard announced the Mayflower's replacement in a press release in early February 1952; the announcement further stated that the replacement would probably not be on sale until 1953. [24] The Standard Eight, which replaced the Mayflower, had a basic specification and was aimed at a different type of buyer. From the ending of Mayflower production in 1953, there was no small saloon with the Triumph name available in the United Kingdom until the launch of the Triumph Herald in 1959. [25] The Standard Ten saloon and Standard Companion estate were sold as Triumphs in the United States. [26]
The front suspension design from the Mayflower was used on the Triumph 20TS prototype and, with modifications, on the Triumph TR2. [7] [12] [27]
The Mayflower is the subject of a well-known painting by Australian artist John Brack— The Car . [28]
Die-cast models of the Mayflower include Mikansue models from the 1980s, Lansdowne models from 2006, and Oxford Diecast 00 scale models from 2008.[ citation needed ]
{{cite news}}
: |author=
has generic name (help)The Ford Pilot is a medium-sized car that was built by Ford UK from August 1947 to 1951. It was effectively replaced in 1951 with the launch of Ford UK's Zephyr Six and Consul models, though V8 Pilots were still offered for sale, being gradually withdrawn during that year. In its production run 22,155 cars were made.
The Triumph Super 7 is a car manufactured from 1927 until 1934 by the Triumph Motor Company. It was produced as a response to the success of the Austin 7 and was Triumph's first car to be made in large numbers. In 1933 the name was changed to the Triumph Super 8.
The Triumph TR range of cars was built between 1953 and 1981 by the Triumph Motor Company in the United Kingdom. Changes from the TR2 to the TR6 were mostly evolutionary, with a change from a live axle to independent rear suspension in 1965 and a change from a four-cylinder engine to a six-cylinder engine in 1967. An all-new TR7, with a unit body, an overhead camshaft four-cylinder engine, and a live rear axle, was introduced in late 1974. The TR8, a development of the TR7 with a Rover V8 engine, was introduced in 1979 and was sold alongside the TR7 until TR production ended.
The Triumph Roadster is a roadster produced by Britain's Standard Motor Company from 1946 until 1949. It was first available as the Triumph 1800 Roadster (18TR) from 1946 to 1948 and then as the Triumph 2000 Roadster (TRA) from 1948 to 1949.
The Standard Vanguard is a car which was produced by the Standard Motor Company in Coventry, England, from 1947 until 1963.
The Triumph Dolomite is a car that was produced by Triumph Motor Company from 1934 to 1940. It first appeared in 1934 as a sports car and the name was also used from 1937 on a series of sporting saloons and open cars until 1939 when the company went into receivership. A number were still sold and registered in 1940, though it is uncertain whether the receiver or new owner turned out cars from spare parts, or sold off completed cars. All except the Straight 8 featured a "waterfall" grille styled by Walter Belgrove, versions of the saloons with conventional grilles were sold as Continental models.
The Jowett Bradford was a British light van produced from 1946 to 1953 by Jowett Cars Ltd of Idle, near Bradford, England. It was also available as an estate car from 1947 to 1953.
The Standard Eight is a small car produced by the British Standard Motor Company from 1938 to 1959.
The Triumph 20TS was a prototype sports car shown by Standard-Triumph in October 1952 at the London Motor Show. Extensive development of the 20TS led to the introduction of the Triumph TR2 in March 1953 at the Geneva Motor Show, after which the 20TS was unofficially referred to as the Triumph TR1. Only one example of this car was ever made by Triumph.
The Standard Ten was a model name given to several small cars produced by the British Standard Motor Company between 1906 and 1961. The name was a reference to the car's fiscal horsepower or tax horsepower, a function of the surface area of the pistons. This system quickly became obsolete as an estimate of the power produced by the engine, but it continued to be relevant as a way to classify cars for tax purposes. Like other manufacturers, Standard continued to use the name to define the approximate size of their 'Ten' model long after the origins of the name had, in Britain, become inapplicable.
The Vauxhall Wyvern is a medium-sized family car introduced by Vauxhall in 1948 as a successor to the Vauxhall 12. The name comes from the mythical beast the wyvern, and may be due to a misidentification of the heraldic griffin on the Vauxhall badge.
The AC 2-Litre is an automobile that was produced by AC of Thames Ditton in Surrey, England between 1947 and 1956. Two and, from 1952, four-door saloons were sold. In addition, as from 1949, a small number of drophead coupés and "Buckland" tourers were produced.
The Alvis Three LitreTA 21, is an automobile which was produced by Alvis Cars between 1950 and 1953. It was announced to the British public the day it went on display at the opening of the Geneva Motor Show 16 March 1950.
The Triumph Renown is strictly the name given to the Triumph's large saloon car made from 1949 to 1954 but it is, in reality, part of a three-car series of the 1800, 2000 and Renown models. Together with the Triumph Roadster, they were the first vehicles to carry the Triumph badge following the company's takeover by the Standard Motor Company.
The Alvis TA 14, also called the Alvis Fourteen, was the first car that the car maker and defence contractor Alvis cars produced after World War II. The entire car factory had been destroyed on the night of Thursday 14 November 1940. Announced in November 1946, it was made until 1950, when its postwar austerity 1900 cc engine was replaced by the 2993 cc 26.25 HP Alvis Three Litre or TA 21.
The Armstrong Siddeley Lancaster is an automobile which was produced by Armstrong Siddeley Motors Limited from 1945 until 1952. It was the first post-war sports saloon to be made by the company.
The Armstrong Siddeley Hurricane is a two-door, four-seat drophead coupé automobile produced by the British company of Armstrong Siddeley from 1946 until 1953. It was based on the Armstrong Siddeley Lancaster saloon.
The Triumph Six Cylinder or Triumph I6 engine is a cast-iron overhead valve straight-six engine produced by Standard Triumph. It is an evolution of the Standard Motor Company's inline-4 Standard Eight, with the addition of two cylinders and a larger displacement.
The Standard wet liner inline-four engine was an inline four cylinder petrol engine produced by the Standard Motor Company. Originally developed concurrently for passenger car use and for the Ferguson TE20 tractor, it was widely used for Standard passenger cars of the 1950s, most notably the Vanguard. Later it was successfully used in Standard's popular early generation Triumph TR series sports cars.
Morris Oxford Series MO is a car produced by Morris Motors of the United Kingdom from 1948 to 1954. It was one of several models to carry the Morris Oxford name between 1913 and 1971.
Following this in 1949, Triumph Mayflower introduced the combined coil spring/damper unit and strut-type telescopic damper.
Of course the Mayflower was just repeating ancient history, for like the 10/20 and so many Triumphs since, it strove to be a "quality light car," and yet remain, as Holbrook held it, "typically English."
Inside, the rear seat was uncomfortably cramped over the rear axle; I swear that after a journey of any length, if two passengers had occupied it they emerged with one buttock squared into a block, for the interior was knife-edged too.