Triumph 2000

Last updated

Triumph 2000, 2.5PI, 2500TC & 2500S
Triumph 2000 Mk II (15882371160).jpg
Triumph 2000 Mk 2 Saloon
Overview
Manufacturer Triumph Motor Company
Production1963–1977
324,652 produced
AssemblyUnited Kingdom
Australia [1] [2]
South Africa [3]
New Zealand [4]
Belgium [5]
Designer Giovanni Michelotti
Body and chassis
Class Mid-size executive car
Body style 4-door saloon
5-door estate
Layout Front-engine, rear-wheel-drive layout
Powertrain
Engine 1,998 cc (121.9 cu in) straight-6 (2000)
2,498 cc (152.4 cu in) straight-6 (2.5 PI, 2500TC & 2500S)
Transmission 4-speed manual
4-speed manual with overdrive
3-speed automatic
Dimensions
Wheelbase 106 in (2,692 mm)
Length174 in (4,420 mm) Mk 1
183 in (4,648 mm) Mk 2
Width67 in (1,702 mm)
Height56 in (1,422 mm)
Chronology
Predecessor Standard Vanguard
Successor Rover SD1

The Triumph 2000 is a mid-sized, rear wheel drive automobile which was produced in Coventry by the Triumph Motor Company between 1963 and 1977. It was introduced on 15 October 1963. [6] It was styled by Giovanni Michelotti. [7] [8] [9] [10]

Contents

It competed with the contemporary Rover P6 2000, which initially was offered only with a four-cylinder engine. The Rover was also released in October 1963, just one week before the Triumph. [11] Larger-engined models, known as the Triumph 2.5 PI and Triumph 2500 were also produced from 1968.

Engine

The 2000 used the six-cylinder engine first seen in the Standard Vanguard at the end of 1960. [12] However, the last of the six cylinder Vanguards had applied a compression ratio of 8.0:1 which the increasing availability of higher octane fuels enabled the manufacturers to increase to 8.5:1 for the Triumph. [13] This and the fitting of twin Stromberg 150 CD carburettors made for a claimed power output increased to 90 bhp (67 kW; 91 PS) from the Vanguard's 80 bhp (60 kW; 81 PS).

Running gear

Standard transmission on the original car was a 4-speed manual gearbox: overdrive and Borg-Warner Type 35 3-speed automatic transmission were options. [13] The unitary body had independent suspension all-round with semi-trailing arms at the rear, all using coil springs. The servo-assisted brakes were disc at the front and drums at the rear.

Triumph 2000 Mk 1 & 2.5 PI Mk 1

Triumph 2000 Mk 1
Triumph 2.5 PI Mk 1
1967 Triumph 2000.jpg
1967 Triumph 2000 Mk 1 Saloon
Overview
Production1963–1969 (2000)
120,645 produced
1968–1969 (2.5 PI)
9,029 produced
Body and chassis
Body style 4-door saloon
5-door estate
Powertrain
Engine 1,998 cc straight-6 (2000)
2,498 cc straight-6 (2.5 PI)
Transmission manual 4-speed gearbox (overdrive optional) [14] or
automatic Borg-Warner Type 35 [14]

The Mk 1 was presented to the public at the London Motor Show in October 1963, and volume sales began in January 1964. Continuing in production until 1969, this version came in saloon and, from 1965, estate forms. The estate car body shell was partly built by Carbodies, [15] :119 and in the Mk 1 version was the same length as the saloon. Various minor improvements were made during the period of which the most noteworthy, probably, was a significant upgrade in October 1966 to the "previously rather ineffective" ventilation, with eyeball vents added in the centre of the facia and the heater controls repositioned beneath them. [16]

In October 1968 [17] the 2.5 PI (petrol injection) Mk 1 was launched, fitted with a Lucas Automotive mechanical fuel injection system. Performance was very good, but the PI models (along with the TR6 models) gained a reputation for unreliability and poor fuel economy.

In Australia, these models suffered badly because of the summer heat. The electric fuel pump commonly overheated causing fuel to vaporise and render the engine inoperable until the pump cooled down. The overheating of the pump was caused by a combination of very high pressure fuel loads (over 110 psi (7.6 bar)) and a pump that was adapted from what was originally a windscreen wiper motor. As such, it did not cope well with sustained pressures in moderate to high ambient temperatures. Because of the launch late in the Mk I's life, there are relatively few PIs in the original shape.

Triumph 2000 Mk 2, 2.5 PI Mk 2, 2500TC and 2500S

Triumph 2000 Mk 2
Triumph 2.5 PI Mk 2
Triumph 2500TC
Triumph 2500S
KUU2P 1976 Triumph 2000 TC.jpg
1976 Triumph 2000 TC Saloon
Overview
Also calledTriumph Chicane (South Africa) [3]
Production1969–1977 (2000)
104,580 produced
1969–1975 (2.5 PI)
49,742 produced
1974–1977 (2500TC)
32,492 produced
1975–1977 (2500S)
8,164 produced
Body and chassis
Body style 4-door saloon
5-door estate
Powertrain
Engine 1,998 cc straight-6 (2000)
2,498 cc straight-6 (2.5 PI, 2500TC & 2500S)

In October 1969, [14] the Mk 2 range was launched, styled, like its predecessor, by Michelotti, and preparing the car for the 1970s. The front of the car now followed the lines of the then-upcoming Triumph Stag grand tourer. There were entry-level 2000 models, which were the most plentiful, but the remainder of the range consisted of 2500, 2500 TC and 2500 PI models. Apart from the PI (petrol injection) models, all Triumph 2000 and 2500s had twin Stromberg or SU carburettors, the "TC" suffix on some models can seem misleading in this respect as it stood for a higher equipment level. In June 1975 the 2500S model, with 14 inch (356 mm) wheels and anti-roll bar, was added: it replaced the 2.5PI which had quietly disappeared from the show rooms two months earlier. [18] This marked the end of fuel injected engines for the car, but improved acceleration was claimed for the twin carburettor 2500S and its slightly less expensive 2500TC sibling. [18] These new versions featured an extensive list of other, mostly minor, improvements, of which the most significant were probably those affecting the ride and handling: these resulted from suspension changes including an anti-roll bar. [18] The Estate in the Mk 2 version was 5 inches (125 mm) shorter than the Mk 2 Saloon, because the rear bodywork of the car was carried over unchanged from the Mk 1 version, and as with the Mk 1, built by Carbodies. [15] :125

The Mk 2, the last big Triumph car, ceased production in 1977, supplanted by British Leyland's corporate executive car, the Rover SD1. Six-cylinder 2300 and 2600 versions of the new Rover would nonetheless be powered by engines designed by Triumph, originally intended to replace the older 2000 / 2500 units. [19] [20] The last production car, a 2500S estate (BOL87V) is kept at the Heritage Motor Centre.

Overseas assembly

Various models were assembled in South Africa, with the later 2500TC and 2500S being badged Triumph Chicane in that market between 1973 and 1978. [21]

In New Zealand, CKD production of the Triumph 2000 continued at New Zealand Motor Corporation's Nelson plant, with 2500S models until March 1979. Sir Rob Muldoon, New Zealand's then Prime Minister, privately owned a white 2500S and had been known to drive to work in it. This car is now owned by a member of the Auckland Triumph Car Club.

The 2000 was assembled in Australia by Australian Motor Industries. [22] A special version of the Mk 1 was known as the 2000MD ("Managing Director"), which had special features such as knock-off wire wheels, triple Stromberg carburettors, and the battery moved to the boot. [22] Total production of the 2000MD was approximately 100. [22]

Today

Many of these cars are still on the road, supported by owners clubs and specialist parts. [23]

The 2000 and derivatives are also popular with modifiers owing to common parts and engines shared with other Triumph models such as the TR6, GT6, and Vitesse.

Motor sport

Factory-entered 2.5 PIs finished 2nd and 4th in the 1970 London to Mexico World Cup Rally. [24]

Related Research Articles

<span class="mw-page-title-main">Morris Marina</span> Motor vehicle

The Morris Marina is a front-engined, rear-wheel-drive small family car that was manufactured by the Austin-Morris division of British Leyland from 1971 until 1980. It served to replace the Morris Minor in the Morris product line, which had first been built in 1948. The Marina was also sold in some markets as the Austin Marina, the Leyland Marina and the Morris 1700.

<span class="mw-page-title-main">Princess (car)</span> Car produced in 1975–1982 by Austin-Morris

The Princess is a large family car produced in the United Kingdom by the Austin-Morris division of British Leyland from 1975 until 1981. The car inherited a front-wheel drive / transverse engine configuration from its predecessor, the Austin/Morris 1800 range. This was still unusual in Europe for family cars of this type and gave the Princess a cabin space advantage when compared with similarly sized cars from competing manufacturers.

<span class="mw-page-title-main">Triumph Motor Company</span> British car manufacturing company, 1885–1984

The Triumph Motor Company was a British car and motor manufacturing company in the 19th and 20th centuries. The marque had its origins in 1885 when Siegfried Bettmann of Nuremberg formed S. Bettmann & Co. and started importing bicycles from Europe and selling them under his own trade name in London. The trade name became "Triumph" the following year, and in 1887 Bettmann was joined by a partner, Moritz Schulte, also from Germany. In 1889, the businessmen started producing their own bicycles in Coventry, England.

<span class="mw-page-title-main">Triumph Stag</span> Motor vehicle

The Triumph Stag is a 2+2 sports tourer which was sold between 1970 and 1978 by the British Triumph Motor Company, styled by Italian designer Giovanni Michelotti.

<span class="mw-page-title-main">Standard Motor Company</span> British motor vehicle manufacturer

The Standard Motor Company Limited was a motor vehicle manufacturer, founded in Coventry, England, in 1903 by Reginald Walter Maudslay. For many years, it manufactured Ferguson TE20 tractors powered by its Vanguard engine. All Standard's tractor assets were sold to Massey Ferguson in 1959. Standard purchased Triumph in 1945 and in 1959 officially changed its name to Standard-Triumph International and began to put the Triumph brand name on all its products. A new subsidiary took the name The Standard Motor Company Limited and took over the manufacture of the group's products.

The name Ford Corsair was used both for a car produced by Ford of Britain between 1963 and 1970, and for an unrelated Nissan-based automobile marketed by Ford Australia between 1989 and 1992.

<span class="mw-page-title-main">Leyland P76</span> Motor vehicle

The Leyland P76 is a large car that was produced by Leyland Australia, the Australian subsidiary of British Leyland. Featuring what was described at the time as the "standard Australian wheelbase of 111 inches", it was intended to provide the company with a genuine rival to large local models like the Ford Falcon, the Holden Kingswood, and the Chrysler Valiant. But, due to the first real fuel crisis and demand far exceeding the supply, Leyland rushed the assembly process with the first of the P76s to come off the assembly line, resulting in poor build quality and some reliability problems. The combination of the rushed assembly, fuel crisis and strikes at the component manufacturers' factories, resulted in the Leyland P76 being labelled a lemon, despite being named Wheels Car of the Year in 1973. By 1974, sales of the P76 had slumped and BMC decided to end the production of the P76. Although the P76 has been labelled a lemon in Australian motoring history, it is viewed by some as an iconic Australian car and has a loyal following.

<span class="mw-page-title-main">Ford Consul</span> Car model by Ford (1951-1975)

The Ford Consul is a car that was manufactured by Ford of Britain from 1951 until 1962. The name was later revived for a model produced by Ford in both the UK and in Germany from 1972 until 1975.

<span class="mw-page-title-main">Triumph Spitfire</span> Motor vehicle

The Triumph Spitfire is a British sports car manufactured over five production iterations between 1962 and 1980. Styled for Standard-Triumph in 1957 by Italian designer Giovanni Michelotti, the Spitfire was introduced at the London Motor Show in 1962. It was manufactured at the Standard-Triumph Canley works, with approximately 315,000 produced over 18 years.

<span class="mw-page-title-main">Rover SD1</span> Motor vehicle

The Rover SD1 is both the code name and eventual production name given to a series of executive cars built by the Specialist Division, and finally the Austin Rover division of British Leyland from 1976 until 1986, when it was replaced by the Rover 800. The SD1 was marketed under various names. In 1977 it won the European Car of the Year title.

<span class="mw-page-title-main">Triumph 1300</span> Motor vehicle

The Triumph 1300 is a medium/small 4-door saloon car that was made between 1965 and 1970 by Standard Triumph in Coventry, England, under the control of Leyland Motors. It was introduced at the London Motor Show in October 1965 and intended as a replacement for the popular Triumph Herald. Its body was designed by Michelotti in a style similar to the larger Triumph 2000. It was replaced by the Triumph 1500, though it was also re-engineered in the early 1970s to provide the basis for the Toledo and Dolomite ranges.

<span class="mw-page-title-main">Triumph Herald</span> Motor vehicle

The Triumph Herald is a small two-door car introduced by Standard-Triumph of Coventry in 1959 and made through to 1971. The body design was by the Italian stylist Giovanni Michelotti, and the car was offered in saloon, convertible, coupé, estate and van models, with the latter marketed as the Triumph Courier.

<span class="mw-page-title-main">Triumph Vitesse</span> Motor vehicle

The Triumph Vitesse is a compact six-cylinder car built by Standard-Triumph from 1962 to 1971. The car was styled by Giovanni Michelotti, and was available in saloon and convertible variants.

<span class="mw-page-title-main">BMC ADO16</span> Motor vehicle

The BMC ADO16 is a range of small family cars built by the British Motor Corporation (BMC) and, later, British Leyland. Launched in 1962, it was Britain's best-selling car from 1963 to 1966 and from 1968 to 1971. The ADO16 was marketed under various make and model names; however, the Austin 1100 and Morris 1100 were the most prolific of all the ADO16 variants. The car's ubiquity at the height of its popularity led to it simply being known as the 1100 (eleven-hundred) in its home market. Also made with a 1275cc engine, it was then typically called 1300.

<span class="mw-page-title-main">Rover P6</span> Motor vehicle

The Rover P6 series is a saloon car produced by Rover and subsequently British Leyland from 1963 to 1977 in Solihull, West Midlands, England, UK.

Standard was an Indian brand of automobile which was produced by Standard Motor Products of India Limited (SMPIL) in Madras from 1951 to 1988. Indian Standards were variations of vehicles made in the United Kingdom by Standard-Triumph. Standard Motor Products of India Ltd. (STAMPRO) was incorporated in 1948, a company formed by Union Company (Motors) Ltd. and the British Standard Motor Company. Their first product was the Standard Vanguard. The company was dissolved in 2006 and the old plant was torn down.

<span class="mw-page-title-main">Standard Vanguard</span> Motor vehicle made in England

The Standard Vanguard is a car which was produced by the Standard Motor Company in Coventry, England, from 1947 until 1963.

<span class="mw-page-title-main">Triumph I6</span> Reciprocating internal combustion engine

The Triumph Six Cylinder or Triumph I6 engine is a cast-iron overhead valve straight-six engine produced by Standard Triumph. It is an evolution of the Standard Motor Company's inline-4 Standard Eight, with the addition of two cylinders and a larger displacement.

<span class="mw-page-title-main">Standard SC engine</span> Reciprocating internal combustion engine

The Standard SC engine is a cast-iron overhead valve straight-four engine designed and initially produced by Standard Triumph. Over its production life displacement grew from an initial size of just over 800 cc to nearly 1500 cc. Introduced in the Standard Eight in 1953, it would eventually be used in a wide range of vehicles from Standard, Triumph, and MG.

The Austin D and K series engines are a straight-six engine made by the British Austin Motor Company between 1939 and 1968. It was developed initially for the lorry market; but was used in a number of automobiles in its later life. It was an overhead valve non-crossflow cylinder head design. Both block and head were made out of cast iron. All engines had a forged four main bearing crankshaft.

References

  1. Triumph 2000/2500/2.5 Historical Page Retrieved on 29 March 2012
  2. Australian Motor Industries (AMI) The Start Retrieved on 30 March 2012
  3. 1 2 Class Acts, Part 2: Triumph 2000, 2.5 PI, and 2500 Mk 2, ateupwithmotor.com Retrieved on 10 April 2014
  4. "Motor Assembly Plant Officially Opened - Nelson Photo News - No 67 : May 28, 1966". photonews.org.nz. Retrieved 28 May 2019.
  5. "Malines (Belgium) factory Leyland-Triumph 1972". www.motorgraphs.com. Retrieved 23 February 2020.
  6. New Triumph marks the End of an Era. The Times, Tuesday, 15 October 1963; pg. 16; Issue 55832
  7. Bill Boddy (November 1963). "Driving the new Triumph 2000". Motor Sport . Retrieved 9 February 2021.
  8. Dave Moss (4 December 2015). "Michelotti (and the Triumph Stag) – 'A free pencil…'". 2015 marks the 45th anniversary of the launch of the Triumph Stag. Dave Moss looks back at the car and its talented instigator, Giovanni Michelotti…. Kim Henson, "Wheels Alive". Retrieved 9 February 2021.
  9. "Rover P6". Classic Cars. "Classic Cars", Brentwood, Essex. Retrieved 9 February 2021.
  10. Jonathan Lewis (2010). "The Triumph 2000 Story – The Final Years: 'TC' and 'S' Models, 1974-1977". The Triumph 2000 Register, Wakefield, Yorkshire . Retrieved 9 February 2021.
  11. "Buying Secondhand: Rover 2000/2200". Autocar . 144. Vol. nbr 4155. 26 June 1976. pp. 62–64.
  12. "On the road ... Standard's new 'Luxury Six' Vanguard is based on their Michelotti-styled 'Vignale'. The new 1,998 c.c. (74.7 x 76 mm) six-cylinder engine has push-rod o.h. valves and twin down-draught carburetter ...". Practical Motorist. 7. (nbr 76): 7. December 1960.
  13. 1 2 "Used Car Test: 1967 Triumph 200 Automatic". Autocar . 136. Vol. (nbr 3958). 10 February 1972. pp. 24–25.
  14. 1 2 3 "Used Car Test: 1971 Triumph 2000 Estate Car". Autocar . 138. Vol. (nbr 4019). 7 June 1973. pp. 16–17.
  15. 1 2 Bill Munro (1998). Carbodies The Complete Story. The Crowood Press. ISBN   1-86126-127-6.
  16. "Used Car Test: Triumph 2000 (overdrive)". Autocar . 127. Vol. (nbr 3750). 28 December 1967. pp. 20–21.
  17. "Triumph". The Times . No. 57370. 1 October 1968. p. 9.
  18. 1 2 3 "New from British Leyland: 2.5PI gives way to 2500S". Autocar . 141. Vol. (nbr 4100). 7 June 1975. p. 59.
  19. Keith Adams (26 August 2011). "Engines : Rover SD1 Six ... Leyland's first, Triumph's last". AROnline. Retrieved 18 January 2016.
  20. "The Rover 2300, MK1". THE ROVER SD1 CLUB. Archived from the original on 2 November 2007. Retrieved 18 January 2016.
  21. Time & Tide, Volume 55, Time and Tide Publishing Company, 1974, page 12
  22. 1 2 3 Chambers, Cliff (27 February 2013). "Ones That Got Away". Unique Cars (347): 24. Retrieved 5 March 2013.
  23. "The Triumph 2000 2500 2.5 Register". triumph2000register.co.uk. Retrieved 28 May 2019.
  24. The Triumph 2000 Story - The Big Triumphs in ‘Works’ Competition: 1964-1976, triumph2000register.co.uk Retrieved on 14 April 2014