Austin 3-Litre | |
---|---|
![]() 1971 Austin 3-Litre | |
Overview | |
Manufacturer | Austin |
Production | October 1967 – May 1971 |
Assembly |
|
Body and chassis | |
Class | Executive car (E) |
Body style | 4-door saloon 5-door estate (Crayford Conversion) |
Layout | |
Related | Austin 1800-2200 |
Powertrain | |
Engine | 2,912 cc (177.7 cu in) C-Series Straight-6 |
Dimensions | |
Wheelbase | 114.5 in (2,908 mm) [1] |
Length | 185.75 in (4,718 mm) |
Width | 67 in (1,702 mm) |
Height | 56.6 in (1,438 mm) |
Curb weight | 3,304 lb (1,499 kg) |
Chronology | |
Predecessor | Austin A110 |
Successor | None |
The Austin 3-Litre is a British saloon car that was introduced by Austin at the London Motor Show in 1967. [2] Codenamed ADO61, the car was intended to be BMC's offering in the 3-litre executive class and was originally designed in the early 1960s, [3] before the British Leyland era. Unlike the visually similar (but smaller) front-wheel drive Morris 1800 range, the 125 bhp 3-litre engine (a 7-bearing modification of the BMC C-Series with twin SU carburettors) drove the rear wheels through a conventional 4-speed gearbox.
The car used Hydrolastic suspension with self-levelling hydraulic rams at the rear and was praised for its excellent ride and handling. Alec Issigonis, who designed the front-wheel drive cars, had no part in the 3-Litre, which he was reportedly keen to point out. [4]
To cater for its intended market, the interior was luxurious, featuring wood veneers and cloth headlining (but leather upholstery was not available, being replaced with a good-quality vinyl) and the boot was longer than that of the 1800, contributing to an overall length of 186 inches (4,700 mm) (the 1800 was 167 inches (4,200 mm) long).
Luxurious Wolseley and Vanden Plas 3-litre versions both reached prototype stage, but went no further.
A small number of estate models were built however, converted by Crayford.
Other body variations of the 3-litre are known to exist including stretch limousines, hearses and ambulances. [5]
It became apparent that BMC were initially not geared up to producing the car: few or none seem to have been sold in 1967, but by July 1968, it was reported that the cars had begun to leave the factory. [6] By that time, the square headlights seen at the 1967 motor show had been replaced by conventional round twin headlamp units, and by the time of the October 1968 show the car had also acquired front quarter lights. [6] In July 1968, with cars beginning to emerge from the plant, the manufacturers were asked to detail improvements reportedly implemented since the car's "launch" the previous October. Mention was made of orifice modifications to hydraulic valves in the rear suspension, and it was stated that there was a "new" final drive ratio of 3.9:1, though this was actually the same final drive ratio included in the launch information the previous October. [7]
In the early days of British Leyland, proposals for a Rover-branded version were considered to replace the Rover P5 3-Litre but these did not progress beyond the drawing board. A number were converted to hearses; the Woodhall Nicholson conversion was voted Hearse of the year in 1968. [8]
Sales were very poor. The standard version had been withdrawn by 1969, while the de-luxe version soldiered on until the model was discontinued completely in May 1971, [6] after fewer than 10,000 had been produced. It suffered from a perception that it was merely an enlarged Morris "Landcrab" (indeed, it gained the nickname "Land-lobster"), with which it shared its central section and doors – a perception that was exacerbated further when the smaller Austin Maxi also used the same bodywork, although the 3-Litre was in fact a quite different car. BMC also failed to take into account the changing tastes in the 'executive' sector of the car market. Cars such as the Rover P6 and the Triumph 2000 had set new standards for handling in the class and had smaller but more efficient engines as well as more fashionable and modern styling. The 3-Litre was very much in the spirit of its Austin Westminster predecessor – a large car with an understressed large-capacity engine that put an emphasis on luxury and ride comfort over handling and economy, although both these last two factors were becoming more important in the sector.
The 3-Litre also arrived on the market just as BMC had taken over Jaguar and had merged with Leyland Motors to create British Leyland (BL). Within the new conglomerate, the 3-Litre was now being sold alongside similarly sized rivals from Jaguar, Rover and Triumph – all perceived as genuine performance/luxury brands compared to Austin, which was seen as a downmarket mainstream brand. For this reason the 3-Litre was not directly replaced, and ultimately Rover and Jaguar models fulfilled the 3-Litre's role in BL's portfolio.
The Mini is a small, two-door, four-seat car produced by the British Motor Corporation (BMC) and its successors, from 1959 until 2000. Minus a brief hiatus, original Minis were built for four decades and sold during five, from the last year of the 1950s into the last year of the 20th century, over a single generation, as fastbacks, estates, and convertibles.
Jaguar is the sports car and luxury vehicle brand of Jaguar Land Rover, a British multinational car manufacturer with its headquarters in Whitley, Coventry, England. Jaguar Cars was the company that was responsible for the production of Jaguar cars until its operations were fully merged with those of Land Rover to form Jaguar Land Rover on 1 January 2013.
Morris Motors Limited was a British privately owned motor vehicle manufacturing company formed in 1919 to take over the assets of William Morris's WRM Motors Limited and continue production of the same vehicles. By 1926 its production represented 42 per cent of British car manufacture—a remarkable expansion rate attributed to William Morris's practice of buying in major as well as minor components and assembling them in his own factory.
The British Motor Corporation Limited (BMC) was a UK-based vehicle manufacturer formed in early 1952 to give effect to an agreed merger of the Morris and Austin businesses.
The Morris Marina is a front-engined, rear-wheel-drive small family car that was manufactured by the Austin-Morris division of British Leyland from 1971 until 1980. It served to replace the Morris Minor in the Morris product line, which had first been built in 1948. The Marina was also sold in some markets as the Austin Marina, the Leyland Marina and the Morris 1700.
The Austin Motor Company Limited was a British manufacturer of motor vehicles, founded in 1905 by Herbert Austin in Longbridge. In 1952 it was merged with Morris Motors Limited in the new holding company British Motor Corporation (BMC) Limited, keeping its separate identity. The marque Austin was used until 1987 by BMC's successors British Leyland and Rover Group. The trademark is currently owned by the Chinese firm SAIC Motor, after being transferred from bankrupt subsidiary Nanjing Automotive which had acquired it with MG Rover Group in July 2005.
British Leyland was a British automotive engineering and manufacturing conglomerate formed in 1968 as British Leyland Motor Corporation Ltd (BLMC), following the merger of Leyland Motors and British Motor Holdings. It was partly nationalised in 1975, when the UK government created a holding company called British Leyland, later renamed BL in 1978. It incorporated much of the British-owned motor vehicle industry, which in 1968 had a 40% share of the UK car market, with its history going back to 1895. Despite containing profitable marques such as Jaguar, Rover, and Land Rover, as well as the best-selling Mini, BLMC had a troubled history, leading to its eventual collapse in 1975 and subsequent part-nationalisation.
British Motor Holdings Limited (BMH) was a British vehicle manufacturing company known until 14 December 1966 as British Motor Corporation Limited (BMC). BMH was created as a holding company following BMC's takeover of both Jaguar Cars and the Pressed Steel Company in that year.
The Austin Princess is a series of large luxury cars that were made by Austin and its subsidiary Vanden Plas from 1947 to 1968. The cars were also marketed under the Princess and Vanden Plas marque names.
The Triumph 1300 is a medium/small 4-door saloon car that was made between 1965 and 1970 by Standard Triumph in Coventry, England, under the control of Leyland Motors. It was introduced at the London Motor Show in October 1965 and intended as a replacement for the popular Triumph Herald. Its body was designed by Michelotti in a style similar to the larger Triumph 2000. It was replaced by the Triumph 1500, though it was also re-engineered in the early 1970s to provide the basis for the Toledo and Dolomite ranges.
BMC ADO17 is the model code used by the British Motor Corporation (BMC) for a range of front wheel drive cars in the European 'D' market-segment of larger family cars, manufactured from September 1964 to 1975. The car was initially sold under the Austin marque as the Austin 1800, then by Morris as the Morris 1800, and by Wolseley as the Wolseley 18/85. Later, it was marketed with a 2.2 L engine as the Austin 2200, Morris 2200 and Wolseley Six. Informally, because of the car's exceptional width and overall appearance, these cars became widely known under the nickname "landcrab"
The BMC ADO16 is a range of small family cars built by the British Motor Corporation (BMC) and, later, British Leyland. Launched in 1962, it was Britain's best-selling car from 1963 to 1966 and from 1968 to 1971. The ADO16 was marketed under various make and model names; however, the Austin 1100 and Morris 1100 were the most prolific of all the ADO16 variants. The car's ubiquity at the height of its popularity led to it simply being known as the 1100 (eleven-hundred) in its home market. Also made with a 1275cc engine, it was then typically called 1300.
The MGB is a two-door sports car manufactured and marketed from 1962 until 1980 by the British Motor Corporation (BMC), later the Austin-Morris division of British Leyland, as a four-cylinder, soft-top sports car. It was announced and its details first published on 19 September 1962. Variants include the MGB GT three-door 2+2 coupé (1965–1980), the six-cylinder sports car and coupé MGC (1967–1969), and the eight-cylinder 2+2 coupé, the MGB GT V8 (1973–1976).
The Rover P6 series is a saloon car produced by Rover and subsequently British Leyland from 1963 to 1977 in Solihull, West Midlands, England, UK.
The Austin Gipsy is an off-road vehicle produced by Austin from 1958 to 1968. It was designed as a lower-cost replacement for the Austin Champ, to compete directly with Rover's Land Rover. Like the Land Rover, it was aimed at both the civilian and military markets.
The BMC E-series engine is a line of straight-4 and straight-6 overhead camshaft automobile petrol engines from the British Motor Corporation (BMC). It displaced 1.5 L or 1.8 L in four-cylinder form, and 2.2 L or 2.6 L as a six-cylinder. The company's native United Kingdom market did not use the 2.6 L version, which was used in vehicles of Australian and South African manufacture. Although designed when the parent company was BMC, by the time the engine was launched the company had become British Leyland (BL), and so the engine is commonly referred to as the British Leyland E-series engine.
The S series is a straight-4 SOHC internal combustion engine developed by the Austin Rover Group, and produced from 1984 until 1993. The engine was used in the Austin Montego, Mark 1 Rover 200-series and the MG Maestro. The engine was used in the Austin Maestro from 1985 onwards.
The Austin Kimberley and Austin Tasman "X6" models are a pair of Leyland Australia-designed front-wheel-drive sedans based on the Austin 1800 (ADO17) platform, that were produced from 1970 to 1972 and sold by Austin. At the time of the X6 being launched onto the Australian market it was quite an advanced design in comparison to the other competitors from Ford, Holden and Chrysler, whose rear-wheel drive, conventionally sprung underpinnings dominated the market at the time.
There have been a number of Mini concept cars, produced to show future ideas and forthcoming models at international motorshows.
The Austin Drawing Office was the design and engineering department of the British Motor Corporation. From the early 1950s, the resulting projects of the office were known by the initials ADO. The numbers were assigned to vehicle and engineering projects, some resulting in production models. The ADO numbering system continued well beyond BMC's absorption into British Leyland, who continued to use the convention until the late 1970s.