MG Midget

Last updated

MG Midget
1963 M.G. Midget (6322636050).jpg
MG Midget Mark I (1963)
Overview
Manufacturer MG (BMC, later British Leyland)
Production1961–1979
Assembly
Body and chassis
Class Sports car
Body style 2-door roadster
Layout FR layout
Related Austin-Healey Sprite
Powertrain
Engine
  • MkI: 948 cc A-Series I4
  • MkII: 1.1L (1098 cc) A-Series I4
  • MkIII: 1.3L (1275 cc) A-Series I4
  • MkIV: 1.5L (1493 cc) Standard SC I4
Dimensions
Wheelbase 80 in (2,032 mm) [2]
Length137 in (3,480 mm) [2]
Width
  • Mk I and II 54 in (1,372 mm) [2]
  • Mk III and 1500 55 in (1,397 mm)
Height48.5 in (1,232 mm) (before springs enlarged for 1974 rubber bumper cars)
Curb weight 735 kg (1,620 lb) (approx.)
Chronology
Successor MG F / MG TF

The MG Midget is a small two-seater lightweight sports car produced by MG from 1961 to 1979. It revived a name that had been used on earlier models such as the MG M-type, MG D-type, MG J-type and MG T-type.

Contents

MG Midget MkI (1961–64)

MG Midget Mk 1 (with optional wire wheels) MG Midget Mk 1 (1963) - 15105200957.jpg
MG Midget Mk 1 (with optional wire wheels)

The first version, announced at the end of June 1961, [3] was essentially a slightly more expensive badge-engineered version of the MkII Austin-Healey Sprite deluxe version. The original 'frogeye' Sprite had been introduced specifically to fill the gap in the market left by the end of production of the MG T-type Midget as its replacement, the MGA had been a significantly larger and more expensive car with greater performance. Many existing MG buyers turned to the Sprite to provide a modern low-cost sports car and so a badge-engineered MG version reusing the Midget name made sense. The new Midget differed from the Sprite only in grille design, badging, improved interior trim, better instruments and added external polished trim to justify its higher price. [4]

Mechanically the car was identical to its Austin-Healey counterpart, retaining the rear suspension using quarter-elliptic leaf springs and trailing arms from the 'frogeye'. The engine was a 948 cc A-Series with twin SU carburettors producing 46 hp (34 kW) at 5500 rpm and 53 lb⋅ft (72 N⋅m) at 3000 rpm. Brakes were 7-inch (178 mm) drums all round. A hard top, heater, radio and luggage rack were available as factory-fitted extras.

In October 1962, the engine was increased to 1098 cc, raising the output to 56 hp (42 kW) at 5500 rpm and 62 lb⋅ft (84 N⋅m) at 3250 rpm, and disc brakes replaced the drums at the front.This change greatly improved braking at speed, as the original tiny drum setup originated from the Morris Minor, and was wholly inadequate in that application. 13x4" Wire spoked wheels became available. These early 1098 cc engines were not as reliable as the 948 cc units, as the 1098 cc versions suffered from crankshaft bearing failures when run hard.

The doors had no external handles or locks and the windows were sliding Perspex side-screens. A heater was an optional extra.

Production was 16,080 of the small-engined version and 9601 of the 1098. [5]

A car with the 948 cc engine was tested by the British magazine The Motor in 1962 and had a top speed of 87.9 mph (141.5 km/h) and could accelerate from 0-60 mph (97 km/h) in 18.3 seconds. A fuel consumption of 40.2 miles per imperial gallon (7.03 L/100 km; 33.5 mpgUS) was recorded. The test car cost £689 including taxes on the UK market. [2]

MG Midget MkII (1964–66)

1965 MG Midget Mark II 1965 MG MIdget Mk II 1.1.jpg
1965 MG Midget Mark II

Externally the main changes were to the doors, which gained wind-up windows, swivelling quarter lights (AKA wing windows), external handles, and separate locks. The windscreen gained a slight curvature and was retained in a more substantial frame. The hood (US – top), though modified, continued to have a removable frame that had to be erected before the cover was put on. The rear springs were replaced by more conventional semi-elliptic types, which gave a better ride. The engine block was strengthened and larger main bearings were fitted, increasing the power to 59 hp (44 kW) at 5750 rpm and torque to 65 lb⋅ft (88 N⋅m) at 3500 rpm.

A total of 26,601 were made. [5]

MG Midget MkIII (1966–74)

Round wheel arch MG Midget on Autotest MGMidgetRWA.jpg
Round wheel arch MG Midget on Autotest

The engine grew to 1275 cc using the development seen on the Mini-Cooper 'S'. Enthusiasts were disappointed that this was a detuned version of the 76 bhp (57 kW) at 5800 rpm Cooper 'S' engine, giving only 65 hp (48 kW) at 6000 rpm and 72 lb⋅ft (98 N⋅m) at 3000 rpm. A reduced compression ratio of 8.8:1 was used instead of the 9.75:1 employed on the Cooper S engine. The Midget used the 12G940 cylinder head casting that was common to other BMC 1300 cars, whereas the Cooper 'S' had a special head with not only larger inlet, but also larger exhaust valves; however, these exhaust valves caused many 'S' heads to fail through cracking between the valve seats. The detuned engine was used for reasons of model range placement – with the Cooper 'S' spec engine, the Midget could have been faster than the more expensive MGB. The hydraulic system gained a separate master cylinder for the clutch. The hood was now permanently attached to the car, with an improved mechanism with easier operation.

In late 1967 (1968 model year), US-spec cars received several safety additions: a padded fascia (dashboard) with smaller main gauges, collapsible steering column, scissor-type hood hinges, a third windshield wiper, additional side marker lights, and anti-burst door latches.

In Dec 1968, beginning s/n 66236, the rear axle gear ratio was increased from 4.22:1 to 3.90:1, giving 16.5 mph (26.6 km/h) for every 1000 rpm. This increased final drive ratio gave better fuel economy, but reduced acceleration. [6]

MG made minor facelift changes to the body trim in late 1969 (1970 model year), with the sills painted black, a revised recessed black grille, and squared off taillights as on the MGB. The 13-inch Rubery Owen "Rostyle" wheels were standardized, but wire-spoked ones remained an option, fitted with either 5.20x13 Crossply tyres or 145HR13 Pirelli Cinturato CA67. These revised cars were initially presented with a matte-black-painted windscreen surround which proved so unpopular, the Midget reverted to brushed its original brushed alloy after only a few hundred had been manufactured.

In August 1971, the compression ratio on North American engines was reduced to 8.0:1. Engine power output fell to 54.5 bhp (41 kW) at 5500 rpm and 67 lb⋅ft (91 N⋅m) at 3250 rpm.

Facelift MG Midget with new grille, black sills Arklow, Co Wicklow - Ireland (4572133959).jpg
Facelift MG Midget with new grille, black sills

The square-shaped rear wheel arches became rounded in January 1972. Also in this year, a Triumph steering rack was fitted, giving a gearing that was somewhat lower than earlier Midgets. A second exhaust silencer was also added in 1972. Alternators were fitted instead of dynamos (generators) from 1973 onwards.

Seven months into the 1974 model year, oversized rubber bumper blocks, nicknamed "Sabrinas" after the well-endowed British actress, were added to the chrome bumpers to meet the first US bumper impact regulations.

The round-arch Midgets with chrome bumpers marketed for model years 1972-1974 started leaving the Abingdon factory in late 1971. Between 1966 and the 1969 face lift, 22,415 were made, and a further 77,831 up to 1974. [5]

MG Midget 1500 (1974–80)

1976 MG Midget 1500 1976 mg midget arp.jpg
1976 MG Midget 1500
1979 MG Midget 1500 1979 MG Midget 1.5 Rear.jpg
1979 MG Midget 1500

To meet US federal regulations, large black plastic-covered bumpers were added to the front and rear and the ride heights were increased. The increased ride height affected handling and anti-roll bars were added to help with the higher centre of gravity. The A-Series engine was replaced by the 1493 cc Standard SC engine from the Triumph Spitfire, coupled to a modified Morris Marina gearbox with synchromesh on all four gears. The increased displacement of the new engine was better able to cope with the increasing emission regulations. Although the horsepower ratings were similar at 65 hp (48 kW) in home market specifications with twin SU HS4 carbs, the 1493 cc engine produced more torque. The increased output combined with taller gear ratios resulted in faster acceleration (12 seconds 0–60 compared to 13 for the 1275 cc version) and top speed of just over 100 mph.

In the US market British Leyland struggled to keep engine power at acceptable levels as the engines were loaded with air pumps, EGR valves, and catalytic converters to keep up with new US and California exhaust emission control regulations. The U.S market model's dual SU HS2 carbs were swapped for a single Zenith-Stromberg 150 CD4 unit catalytic converter carb in 1976 and all models after came with the Zenith-Stromberg 150 CD4T. [7] Power fell to 50 hp (37 kW) at 5000 rpm and 67 lb-ft of torque at 2500 rpm. The round rear-wheel arches were now square again, to increase the body strength, [8] and the front arches were lowered to minimize the gap from raising the suspension. The last car was made on 7 December 1979, after 73,899 of the last version had been made. [9] The last 500 home-market cars were painted black.

ADO34

Mini-based MG Midget concept car that never made it to production. (Photo taken in 2003 at the Heritage Motor Centre in Gaydon) MGMidgetConcept.jpg
Mini-based MG Midget concept car that never made it to production. (Photo taken in 2003 at the Heritage Motor Centre in Gaydon)

ADO34 was the name of a project active between 1960 and 1964 that aimed to possibly develop a front-wheel drive Mini-based roadster as a possible new MG Midget or Austin-Healey Sprite. Following the launch of the MG Midget in 1961, it was considered as a possible MG Midget or Austin Healey Sprite replacement. [10] This Pininfarina project was cancelled in about 1964.

MG Midget racing coupés

MG racing driver and garage owner Dick Jacobs persuaded Abingdon to build a pair of special lightweight Midgets with a GT body shape inspired by the Aston Martin DB4. The roof used the front part of the standard Midget hardtop, while the rear portion and the windshield were custom. A quick release fuel filler was placed beneath the rear windshield to the right. [11] The nose was redesigned by Syd Enever to improve the aerodynamic efficiency—wind tunnel tests showed that the new body required 13 hp less to achieve 100 mph than the standard body shape. The cars were registered BJB 770 and BJB 771. A third car was constructed for John Milne of Scotland and all three cars survive. The two loaned to Dick Jacobs were originally fitted with 979 cc A-series engines with twin Webers and approximately 80 hp (60 kW). [11] As campaigned from 1962 to 1963 they received 997 cc (Formula Junior-spec.) BMC A-series engines. For the 1964 season they ran the larger Formula Junior engine at 1139 cc, with a 1287 cc engine using a block derived from the Mini-Cooper 'S' available for events where the coupés ran as prototypes. They were fitted with 18.5-imperial-gallon (84 L) fuel tanks, larger oil coolers, large-bore exhaust systems and dual-circuit brakes. [12] [13]

As the MG Midget model was developed, it gained considerable weight and a higher ride height. Despite larger displacement engines, the later cars are slower and handling is adversely affected. Many in the U.S. consider the 1967 model year to exhibit the best stock performance; the 1275 cc engine was unencumbered by power-sapping smog equipment and the added weight of later giant bumpers.

See also

Related Research Articles

<span class="mw-page-title-main">Austin-Healey Sprite</span> Motor vehicle

The Austin-Healey Sprite is a small open sports car produced in the United Kingdom from 1958 until 1971. The Sprite was announced to the press in Monte Carlo by the British Motor Corporation on 20 May 1958, two days after that year's Monaco Grand Prix. It was intended to be a low-cost model that "a chap could keep in his bike shed", yet be the successor to the sporting versions of the pre-war Austin Seven. The Sprite was designed by the Donald Healey Motor Company, with production being undertaken at the MG factory at Abingdon. It first went on sale for £669, using a tuned version of the Austin A-Series engine and as many other components from existing cars as possible to keep costs down.

<span class="mw-page-title-main">Toyota Supra</span> Sports car and grand tourer manufactured by Toyota Motor Corporation

The Toyota Supra is a sports car and grand tourer manufactured by the Toyota Motor Corporation beginning in 1978. The name "supra" is derived from the Latin prefix, meaning "above", "to surpass" or "go beyond".

<span class="mw-page-title-main">Austin Metro</span> Supermini British economy car

The Metro is a supermini car, later a city car that was produced from 1980 to 1998, first by British Leyland (BL) and later by the Rover Group. It was launched in 1980 as the Austin Mini Metro. It was intended to complement and eventually replace the Mini, and was developed under the codename LC8. The Metro was named by What Car? magazine as "Car of The Year" in 1983 as an MG, and again as the Rover Metro in 1991.

<span class="mw-page-title-main">Austin Maestro</span> Car model

The Austin Maestro is a five-door hatchback small family car that was produced from November 1982 to 1986 by British Leyland, and from 1986 until December 1994 by Rover Group, as a replacement for the Austin Maxi and Austin Allegro, with the van version replacing the corresponding van derivative of the Morris Ital. The car was produced at Morris' former Oxford plant, also known as Cowley, with 605,000 units sold. Today, the redeveloped factory builds the BMW Mini. An MG-branded performance version was sold as the MG Maestro from 1983 until 1991.

<span class="mw-page-title-main">Maserati Bora</span> Motor vehicle

The Maserati Bora is a two-seat, rear mid-engine, rear-wheel drive sports car and grand tourer, manufactured by Maserati from 1971 to 1978. In common with other Maserati cars of the era, it is named after a wind, Bora being the wind of Trieste. The Bora was the company's first mid-engined street car and ended Maserati's reputation for producing fast but technologically out of date cars, also being the first Maserati with four wheel independent suspension. In contrast, competitor Lamborghini had first used full independent suspension in 1964.

<span class="mw-page-title-main">Ferrari 360</span> Italian two-seater sports car

The Ferrari 360 is a two-seater, mid-engine, rear wheel drive sports car manufactured by Italian automotive manufacturer Ferrari from 1999 until 2005. It succeeded the Ferrari F355 and was replaced by the Ferrari F430 in 2004.

<span class="mw-page-title-main">Triumph Spitfire</span> Motor vehicle

The Triumph Spitfire is a British sports car manufactured over five production iterations between 1962 and 1980. Styled for Standard-Triumph in 1957 by Italian designer Giovanni Michelotti, the Spitfire was introduced at the London Motor Show in 1962. It was manufactured at the Standard-Triumph Canley works, with approximately 315,000 produced over 18 years.

<span class="mw-page-title-main">Nissan VQ engine</span> Reciprocating internal combustion engine

The VQ is a family of V6 automobile petrol engines developed by Nissan and produced in displacements varying from 2.0 L to 4.0 L. Designed to replace the VG series, the all-aluminium 4-valve per cylinder DOHC design debuted with Nissan's EGI/ECCS sequential multi-point fuel injection (MPFI) system. Changes from the VG engine include switching to a timing chain from a timing belt, and relocating the water pump from the outside of the engine to inside the timing cover where the pump is driven by the timing chain. Later versions featured various improvements, such as variable valve timing, and NEO-Di designated VQ engines replace MPFI with direct fuel injection.

<span class="mw-page-title-main">Triumph GT6</span> Motor vehicle

The Triumph GT6 is a 6-cylinder sports coupé built by Standard-Triumph, based on their popular Triumph Spitfire convertible. Production ran from 1966 to 1973.

<span class="mw-page-title-main">Sunbeam Rapier</span> Motor vehicle

The Sunbeam Rapier is an automobile produced by Rootes Group from 1955 until 1976, in two different generations, the "Series" cars and the later (1967–76) fastback shape, part of the "Arrow" range.

<span class="mw-page-title-main">Ferrari 308 GTB/GTS</span> Motor vehicle

The Ferrari 308 GTB berlinetta and targa topped 308 GTS are V8 mid-engined, two-seater sports cars manufactured by the Italian company Ferrari from 1975 until 1985. The 308 replaced the Dino 246 GT and GTS in 1975 and was updated as the 328 GTB/GTS in 1985. The similar 208 GTB and GTS were equipped with a smaller, initially naturally aspirated and later turbocharged, two-litre engine, and were sold mainly in Italy.

<span class="mw-page-title-main">Honda E engine</span> Former Japanese automobile engines

The E-series was a line of inline four-cylinder automobile engines designed and built by Honda for use in their cars in the 1970s and 1980s. These engines were notable for the use of CVCC technology, introduced in the ED1 engine in the 1975 Civic, which met 1970s emissions standards without using a catalytic converter.

<span class="mw-page-title-main">BMC A-series engine</span> Reciprocating internal combustion engine

The Austin Motor Company A-series is a British small straight-4 automobile engine. Launched in 1951 with the Austin A30, production lasted until 2000 in the Mini. It used a cast-iron block and cylinder head, and a steel crankshaft with three main bearings. The camshaft ran in the cylinder block, driven by a single-row chain for most applications, and with tappets sliding in the block, accessible through pressed steel side covers for most applications, and with overhead valves operated through rockers. The cylinder blocks are not interchangeable between versions intended for conventional end-on mounted gearboxes and the 'in-sump' transaxle used on British Motor Corporation/British Leyland front wheel drive models such as the Mini. The cylinder head for the overhead-valve version of the A-series engine was designed by Harry Weslake – a cylinder head specialist famed for his involvement in SS (Jaguar) engines and several Formula One-title winning engines. Although a "clean sheet" design, the A-series owed much to established Austin engine design practise, resembling in general design and overall appearance a scaled-down version of the 1200cc overhead-valve engine first seen in the Austin A40 Devon which would form the basis of the later B-series engine.

<span class="mw-page-title-main">MG MGB</span> Motor vehicle

The MGB is a two-door sports car manufactured and marketed from 1962 until 1980 by the British Motor Corporation (BMC), later the Austin-Morris division of British Leyland, as a four-cylinder, soft-top sports car. It was announced and its details first published on 19 September 1962. Variants include the MGB GT three-door 2+2 coupé (1965–1980), the six-cylinder sports car and coupé MGC (1967–69), and the eight-cylinder 2+2 coupé, the MGB GT V8 (1973–76).

<span class="mw-page-title-main">MG MGA</span> Motor vehicle

The MGA is a sports car that was produced by MG from 1955 until 1962.

<span class="mw-page-title-main">MG T-type</span> Motor vehicle

The MG T-Type is a series of body-on-frame open two-seater sports cars that were produced by MG from 1936 to 1955. The series included the MG TA, MG TB, MG TC, MG TD, and MG TF Midget models. The last of these models, the TF, was replaced by the MGA. Although the design was similar to contemporary cars of the 1930s, it came to be considered outdated by the 1950s.

<span class="mw-page-title-main">FSO Polonez</span> Polish motor vehicle

The FSO Polonez is a motor vehicle that was developed in Poland in collaboration with Fiat and produced by Fabryka Samochodów Osobowych from 1978 to 2002. It was based on the Polski Fiat 125p platform with a new hatchback design by Zbigniew Watson, Walter de Silva and Giorgetto Giugiaro. It was available in body styles that included two- and four-door compact-sized cars, station wagons, as well as commercial versions as pickup truck, cargo van, and ambulance. Production totaled more than one million units, excluding the pickup truck and van variants. The Polonez was marketed in other nations and was popular in its domestic market until Poland joined the European Union in 2004.

<span class="mw-page-title-main">Honda S800</span> Motor vehicle

The S800 is a sports car from Honda. Introduced at the 1965 Tokyo Motor Show, the S800 replaced the successful Honda S600 as the company's image car. With a redline of 9,500 rpm, it is one of the highest-revving sports cars produced for street use. The S800 competed with the Austin-Healey Sprite, MG Midget, Triumph Spitfire, Datsun Fairlady, and Fiat 850 Spider.

<span class="mw-page-title-main">Porsche 911</span> Sports car produced by Porsche

The Porsche 911 is a two-door 2+2 high performance rear-engined sports car introduced in September 1964 by Porsche AG of Stuttgart, Germany. It has a rear-mounted flat-six engine and originally a torsion bar suspension. The car has been continuously enhanced through the years but the basic concept has remained unchanged. The engines were air-cooled until the introduction of the 996 series in 1998.

<span class="mw-page-title-main">Standard SC engine</span> Reciprocating internal combustion engine

The Standard SC engine is a cast-iron overhead valve straight-four engine designed and initially produced by Standard Triumph. Over its production life displacement grew from an initial size of just over 800 cc to nearly 1500 cc. Introduced in the Standard Eight in 1953, it would eventually be used in a wide range of vehicles from Standard, Triumph, and MG.

References

  1. "MG Midget & FWD Register". www.mgcarclubsydney.com.au.
  2. 1 2 3 4 "The M.G. Midget". The Motor . 28 March 1962.
  3. "New MG Midget Announced". The Times. No. 55121. 30 June 1961. p. 8.
  4. Horler, p 50
  5. 1 2 3 Sedgwick, M. (1986). A–Z of Cars 1945–1970. Bay View Bookz. ISBN   1-870979-39-7.
  6. Original Sprite and Midget, Terry Horler, p. 107.
  7. 1500 workshop manual British Leyland UK limited
  8. Sports Car Market, October 2007
  9. Robson, G. (2006). A–Z of British Cars 1945–1980 . Herridge. ISBN   0-9541063-9-3.
  10. Adams, Keith (25 June 2011). "Sports car projects : ADO34, 35 and 36". www.aronline.co.uk.
  11. 1 2 Blunsden, John (September 1962). "Midget GT". Illustrerad Motor Sport (in Swedish). No. 9. Lerum, Sweden. pp. 16–17.
  12. Jacobs, Dick (1976), An MG Experience, Transport Bookman Publications
  13. "Jacobs Midget enthusiast website" . Retrieved 31 May 2014.

Further reading