Bedford CA

Last updated

Bedford CA
Bedford CA based Dormobile February 1968.JPG
Overview
Manufacturer Bedford
Also called Envoy
Production1952–1969
Assembly Luton, England
Body and chassis
Class Light commercial vehicle
Body style Van
Layout Longitudinal front engine, rear-wheel drive
Related Bedford Dormobile
Powertrain
Engine 1.5  L I4 OHV,
1.6 L I4 OHV
Transmission 3-speed manual,
4-speed manual
Dimensions
Wheelbase SWB: 90 in (2,286 mm)
LWB: 102 in (2,591 mm)
LengthSWB: 154 in (3,912 mm)
LWB: 166 in (4,216 mm)
Width70.0 in (1,778 mm)
Height74.75 in (1,899 mm)
Kerb weight SWB: 2,245 lb (1,018 kg)
LWB: 2,345 lb (1,064 kg)
Chronology
Predecessor Bedford PC [1]
Successor Bedford CF
Bedford CA ambulance. Curved windscreens were expensive in the early 1950s, and until 1958 the CA used a "split-screen" windscreen. Bedford CA Ambulance cropped to place van more centrally in the frame.JPG
Bedford CA ambulance. Curved windscreens were expensive in the early 1950s, and until 1958 the CA used a "split-screen" windscreen.
Bedford CA panel van MHV Bedford Van 01.jpg
Bedford CA panel van
Bedford CA pickup Bedford CA.jpg
Bedford CA pickup
As the 1960s progressed, the Bedford CA chassis found itself used as the basis for an increasingly flamboyant succession of motor homes such as this 1965 Dormobile Debonaire. The front windscreen is shared with the standard van along with the mechanical components. Bedford CA based Dormobile Debonaire ca 1965.jpg
As the 1960s progressed, the Bedford CA chassis found itself used as the basis for an increasingly flamboyant succession of motor homes such as this 1965 Dormobile Debonaire. The front windscreen is shared with the standard van along with the mechanical components.

The Bedford CA was a distinctive pug-nosed light commercial vehicle produced between 1952 and 1969 by Bedford in Luton, England.

Contents

It was manufactured in short-wheelbase and long-wheelbase forms, each form available in either a 10–12  cwt or a 15 cwt version. [2]

Generally it was supplied as a light delivery van with sliding doors, but it was also available as a chassis with cowl upon which specialist bodywork could be added. [2] The Bedford Dormobile was a Campervan conversion based on the Bedford CA van.

The CA was also exported to Canada and sold as the Envoy CA, as part of the Envoy brand line-up. In its 17 year production run 370,000 were manufactured. [3] [4]

Dimensions

details [2]
overall width70.0 inches (1,778 mm)
overall height (unladen)74.75 inches (1,899 mm)
axle track 53.25 inches (1,353 mm) (front)54.5 inches (1,384 mm) (rear)
short wheelbaselong wheelbase
wheelbase 90 inches (2,286 mm)102 inches (2,591 mm)
overall length154 inches (3,912 mm)166 inches (4,216 mm)
kerb weight 2,245 pounds (1,018 kg)2,345 pounds (1,064 kg)
turning circle 34 feet (10.4 m)37 feet (11.3 m)

Body

The overall profile and architecture of the CA changed little during the vehicle's seventeen-year life. There were, however, three distinctly different versions sold. The first CAs featured a two-piece windscreen, comprising two separate flat sheets of glass separated with a central vertical metal divide. As curved screen glass became available in the UK at an acceptable price, the two piece windscreen was replaced with a single slightly curved windscreen in approximately 1958. At the same time the painted front grille of the original, which had featured a central split reflecting the split windscreen, was replaced by a smaller unsplit front grille, still painted in the van's body colour. The third version of the Bedford CA, sold from late 1964, featured a much deeper windscreen and side windows, and a corresponding reduction in the height of the painted metal scuttle panel directly below the windscreen. The 1964 vans also reflected general trends in car design of the time in featuring, for the first time, a pressed aluminium alloy front grille. The longer wheelbase version had the body lengthened by an additional short roof panel, with wider doors.

Powertrain

The CA utilised a contemporary powertrain layout. This consisted of a front-mounted longitudinally-oriented internal combustion engine, and rear-wheel drive. The 3-speed gearbox was mounted immediately behind the engine, and torque was transmitted to a live rear axle via an open tubular prop shaft.

The engine and three-speed gearbox were also used in the Vauxhall F-series Victor. The four-speed gearbox from later FC-series models could be easily retro-fitted to any three-speed Bedford CA, and later was offered as a factory option.

Engine

The vehicle was powered by an inline four cylinder petrol engine of 1508cc at first with pushrod operated overhead valves and a three-main bearing crankshaft. The fuel pump, oil pump and distributor were driven directly off the camshaft. A Zenith 34VN downdraught carburetter was fitted. The engine was available in either a low compression or a (less frequently specified) high compression version. [2] Later models also benefitted from the slightly larger 1,594 cubic centimetres (97.3  cu in ) engine, as fitted in the Vauxhall Victor FB post 1964. [5] A 1622 cc (99 cu.in) Perkins diesel engine was also available, as was the Perkins 1760 cc (108 cu.in) diesel engine. [6]

The engine extended back into the vehicle's passenger compartment, and was covered by a removable cowling. The vehicle thus had a very short bonnet, giving it its distinctive look. This configuration meant that the driver and passenger were travelling with their feet alongside the engine, but allowed a good proportion of the vehicle's overall length to be used for its payload. Access to the engine for routine checks was via the tiny bonnet flap, or through the interior cowl. For major overhaul of the engine, the front panel containing the headlights and grille, and the chassis front crossmember had to be completely removed. [2] A popular aftermarket conversion of the time was the use of the Perkins 4/99 diesel engine. This was low on power (40 bhp) but was capable of superior fuel economy.

details [2]
engine configuration inline four overhead valve petrol engine
engine displacement 1,508 cubic centimetres (92.0  cu in )
cylinder bore 3.126 inches (79.4 mm)
piston stroke 3.000 inches (76.2 mm)
low compressionhigh compression
compression ratio 6.8:17.8:1
max. motive power 52.0  bhp (38.8 kW) @ 4,000  rpm 54.8 bhp (40.9 kW) @ 4,200 rpm
max. torque 81.7  lbf⋅ft (111  N⋅m ) @ 2,400 rpm84.5 lbf⋅ft (115 N⋅m) @ 2,400 rpm

Transmission and final drive

The vehicle initially had a three-speed manual transmission driving the rear roadwheels via a semi-floating live rear axle. [2] Later models were offered with the option of a four speed transmission, which introduced an intermediate third gear to ease hill-climbing, although the top gear ratio remained the same as the three-speed gearbox.

Suspension and steering

Front suspension

The front suspension comprised double wishbones and coil springs attached to a front axle crossmember. An anti-roll bar linked the two lower wishbones. [2]

Rear suspension

The rear suspension comprised semi-elliptic leaf springs, 2.25 inches (57 mm) wide, mounted on the chassis and shackled to the rear axle. The 10–12  cwt version had seven leaves, and the 15–17 cwt version had eight leaves. Each leaf was 0.25 inches (6.4 mm) thick. [2]

Steering system

Steering was effected by a Burman worm and nut type steering gear, a four rod linkage system and two relay levers. [2] Despite all of the linkages involved, in practice the system was reasonably precise, and a CA actually handled better than the early Ford Transit thanks to the independent front suspension.

Operating controls and instruments

The gear change was mounted on the steering column. The direction indicator switch was mounted in the instrument panel. The headlamp dip switch was foot operated. The starter switch was push-operated and mounted on the floor panel below the handbrake. [2]

Instruments were limited to a speedometer, a fuel gauge and a water temperature gauge.

The Bedford CA was designed in an era when semi-conductor devices were state-of-the-art, and not affordable for automotive applications. Water temperature was thus measured mechanically, via a capillary tube connected to capsule containing a volatile liquid. The capsule was screwed into the body of the water pump. As the engine coolant temperature increases, the volatile liquid expands, altering the pressure on a mechanical linkage in the water temperature gauge, which moves the position of the needle. Later models used an electric gauge.

The fuel gauge was electrically controlled, as is the case in vehicles today. The sensor unit in the fuel tank could use the electrical resistance of a float-variable rheostat to measure the level of fuel, and was therefore not dependent upon the new semi-conductor technology.

Braking system

The braking system comprised a cast-iron detachable brake drum on each roadwheel, with the retardation provided by asbestos-lined brake shoes mounted in a Twin-leading arrangement at the front wheels and leading/trailing at the back. The shoes were operated by double-acting Lockheed hydraulic cylinders, fed by a single hydraulic circuit connected to the brake master cylinder, which was mechanically linked to the brake pedal. [2] This design was normal for that time.

Related Research Articles

<span class="mw-page-title-main">Ford Anglia</span> Car model

The Ford Anglia is a small family car that was designed and manufactured by Ford UK. It is related to the Ford Prefect and the later Ford Popular. The Anglia name was applied to various models between 1939 and 1967. In total, 1,594,486 Anglias were produced. It was replaced by the Ford Escort.

<span class="mw-page-title-main">Nissan Patrol</span> Motor vehicle

The Nissan Patrol is a series of large four-wheel drive vehicles manufactured by Nissan in Japan and sold throughout the world.

<span class="mw-page-title-main">Vauxhall Victor</span> Motor vehicle

The Vauxhall Victor is a large family car produced by Vauxhall from 1957 until 1976. The Victor was introduced to replace the outgoing Wyvern model. It was renamed Vauxhall VX Series in 1976 and continued in production until 1978, by which time it had grown significantly and was viewed, at least in its home market, as a larger-than-average family car.

<span class="mw-page-title-main">Vauxhall Cresta</span> Motor vehicle

The Vauxhall Cresta is a British automobile which was produced by Vauxhall from 1954 to 1972. The Cresta was introduced in 1954 as an upmarket version of the Vauxhall Velox, itself a six-cylinder version of the Vauxhall Wyvern. The Cresta models were the E (1954–1957), PA (1957–1962), PB (1962–1965) and PC (1965–1972). The Viscount (1966–1972) was an upmarket Cresta PC.

<span class="mw-page-title-main">Lancia Prisma</span> Motor vehicle

The Lancia Prisma is a small family car built by Italian car manufacturer Lancia between 1982 and 1989. It was a saloon version of the first generation Lancia Delta hatchback, and like the Delta it was designed by Giorgetto Giugiaro. Like the Delta it was also available as a 4x4 integrale version, although with a non-turbocharged engine and an air-locking rear differential.

<span class="mw-page-title-main">Mercedes-Benz Actros</span> German heavy-duty truck

The Mercedes-Benz Actros is a heavy-duty truck introduced by Mercedes-Benz at the 1996 Commercial Vehicle IAA in Hanover, Germany, as the replacement for the SK. It is normally used for long-distance haulage, heavy-duty distribution haulage, and construction haulage. It is powered by an inline-6 diesel engine with a turbocharger and intercooler. Daimler Trucks/Lorries launched version II of the Actros in 2002 and version III in 2007. The fourth generation of the Actros, officially named "the New Actros," launched in July 2011.

The following outline is provided as an overview of and topical guide to automobiles:

<span class="mw-page-title-main">Tatra 813</span> Motor vehicle

The TatraT813 was a truck produced in Czechoslovakia by the Tatra company. It was produced from 1967 to 1982. The basic representative of this series was a military version of the 8×8 Kolos (Colossus), which was able to pull trailers up to a total weight of 100 tons. Tatra also produced a civilian version in either 6×6 or 4×4. After fifteen years of production, 11,751 vehicles were built in all modifications. Many units were exported to the USSR, East Germany, Romania and India.

<span class="mw-page-title-main">Ford Thames 400E</span> Motor vehicle

The Ford Thames 400E is a commercial vehicle that was made by Ford UK and introduced in 1957. Production of the range continued until September 1965, by which time a total of 187,000 had been built. Publicity for the model included hiring the Cy Laurie band to make the promotional film short 'Band Wagon', in 1958, preserved in the 'Ford Film and Video Collection' at the National Motor Museum, Beaulieu

<span class="mw-page-title-main">Bedford CF</span> Motor vehicle

The Bedford CF is a range of full-size panel vans produced by Bedford. The van was introduced in 1969 to replace the CA model, and was sized to compete directly with the Ford Transit, which had entered production four years earlier. Its design was similar to its American counterpart, the Chevrolet Van (1971–1995).

<span class="mw-page-title-main">Vauxhall 30-98</span> Motor vehicle

The Vauxhall 30–98 is a car manufactured by Vauxhall at Luton, Bedfordshire from 1913 to 1927. In its day, its best-known configuration was the Vauxhall Velox standard 4-seater with open tourer body. Vauxhall's own description was the 30–98 hp Vauxhall-Velox sporting car. The 30–98 is also known to enthusiasts by Vauxhall's chassis code E.

<span class="mw-page-title-main">Triumph Super 9</span> Motor vehicle

The Triumph Super 9 was a British motorcar model, first introduced by the Triumph Motor Company in 1931 at a price of £185. It continued through into 1933. It had an RAC rating of 8.9 hp.

<span class="mw-page-title-main">Chevrolet van</span> Motor vehicle

The Chevrolet Van or Chevy Van is a range of vans that was manufactured by General Motors from the 1964 to 1996 model years. Introduced as the successor for the rear-engine Corvair Corvan/Greenbrier, the model line also replaced the panel van configuration of the Chevrolet Suburban. The vehicle was sold both in passenger van and cargo van configurations as well as a cutaway van chassis that served as the basis for a variety of custom applications.

<span class="mw-page-title-main">Morris Twelve</span> Motor vehicle

Morris Twelve is a model of Morris car introduced without fanfare in the autumn of 1934 as little more than a larger engined Morris Ten Four for which just another £5 was asked. The chassis and body were of the slow-selling longer wheelbase Ten Six. The engine though awarded a tax rating of 11.98 hp had a cubic capacity of 1548cc compared with Morris's 1292cc (10 hp) Ten Four and 1378cc (12.09 hp) Ten Six.

<span class="mw-page-title-main">Moto Guzzi Triporteurs</span>

The Moto Guzzi Triporteurs were wheeled transport motorcycles (triporteurs) of the Moto Guzzi brand. In Italy, they are called "motocarri".

<span class="mw-page-title-main">Morris Oxford bullnose</span> Motor vehicle

The "bullnose" Morris Oxford is a series of motor car models produced by Morris of the United Kingdom, from 1913 to 1926. It was named by W R Morris after the city in which he grew up and which his cars were to industrialise.

<span class="mw-page-title-main">Daimler Twenty-Two</span> Motor vehicle

Their new Daimler 22 horsepower full-size luxury car was first displayed by Daimler in April 1902 at The Automobile Club’s Exhibition in London's Agricultural Hall. Daimler had elected to drop their multiple old low powered designs and restrict themselves to this 22 horsepower and a pair of 9 or 12 horsepower cars to the same design as the 22 but more lightly constructed. The King’s not quite finished new Daimler 22 was reported to be the chief attraction of the show.

<span class="mw-page-title-main">Unimog 401</span> Motor vehicle

The Unimog 401 is an all-wheel-drive vehicle of the Unimog-series by Mercedes-Benz, developed as a tractor and equipment carrier. It was produced by Daimler-Benz in the Unimog plant in Gaggenau from 1953 to 1956. A total of 16,250 Unimog 401 and 402 were made.

<span class="mw-page-title-main">Vauxhall Big Six</span> Motor vehicle

The Vauxhall Big 6 is a name given to a series of automobiles which was produced by Vauxhall in the United Kingdom from 1934 to 1940. Rolling chassis were also bodied in Australia.

References

  1. Miller, Denis N. (1972). Vanderveen, Bart H. (ed.). A Source Book of Commercial Vehicles. London: Olyslager Organisation, Ward Lock Limited. p. 80. ISBN   0-7063-1286-4.
  2. 1 2 3 4 5 6 7 8 9 10 11 12 Bedford CA Service Training Manual. 1959.
  3. A bigger Bedford from Britain Truck & Bus Transportation May 1970 page 67
  4. Delivery van is bigger than its predecessor Freight & Container Transportation September 1970 page 35
  5. "Open-air holidays". Motor: 1–4. 22 February 1969.
  6. Supplement to Bedford CA Service Training Manual TS.419. Publication TS.602. Vauxhall Motors. December 1963.