| Bedford VAM | |
|---|---|
 Duple bodied Bedford VAM5 in 1975 | |
| Overview | |
| Manufacturer | Bedford |
| Production | 1965 |
| Body and chassis | |
| Doors | 1-2 |
| Floor type | Step entrance |
| Powertrain | |
| Engine | Bedford 300cu petrol Bedford 360cu diesel Bedford 466cu diesel Bedford 500cu diesel Leyland 0.400 |
| Chronology | |
| Successor | Bedford Y series |
The Bedford VAM was a bus chassis manufactured by Bedford from 1965.
In August 1965, Bedford commenced production a new front-entrance coach chassis. [1] [2] [3]
The VAM came with a number of engine options:
The Bedford VAM was sold extensively in the United Kingdom, as well as in export markets including Hong Kong, Australia and New Zealand.
The straight-six engine is an internal combustion engine, with six cylinders mounted in a straight line along the crankcase with all the pistons driving a common crankshaft.
Commer was a British manufacturer of commercial vehicles from 1905 until 1979. Commer vehicles included car-derived vans, light vans, medium to heavy commercial trucks, military vehicles and buses. The company also designed and built some of its own diesel engines for its heavy commercial vehicles.
Dennis Specialist Vehicles was an English manufacturer of commercial vehicles based in Guildford, building buses, fire engines, lorries (trucks) and municipal vehicles such as dustcarts. All vehicles were made to order to the customer's requirements and more strongly built than mass production equivalents. For most of the 20th century the Dennis company was Guildford's main employer.
C/K is a series of trucks that was manufactured by General Motors from the 1960 to 2002 model years. Marketed by both the Chevrolet and GMC divisions, the C/K series encompassed a wide range of vehicles. While most commonly associated with pickup trucks, the model line also included chassis-cab trucks and medium-duty trucks and served as the basis for GM full-size SUVs. Through its entire production, the model line competed directly against the Ford F-Series and the Dodge D series.
Plaxton is an English builder of bus and coach vehicle bodies based in Scarborough. Founded in 1907 by Frederick William Plaxton, it became a subsidiary of Alexander Dennis in May 2007. Since 2019, the maker was acquired by Canadian bus manufacturer New Flyer which then became NFI Group.
Seddon Atkinson Vehicles Limited, a manufacturer of large goods vehicles based in Oldham, Greater Manchester, England, was formed after the acquisition in 1970 of Atkinson Vehicles Limited of Preston by Seddon Diesel Vehicles Limited of Oldham. In 1974, the firm was acquired by International Harvester, which sold it in March 1984 to the Spanish group Enasa which made it a subsidiary of Pegaso. In 1990, it became part of Iveco which used the brand for various types of specialised vehicles in the United Kingdom. The range of models produced included EuroMover, Pacer and Strato, which are aimed at refuse collection, recycling and construction operators.
Henry Meadows, usually known simply as Meadows, of Wolverhampton, England were major suppliers of engines and transmissions to the smaller companies in the British motor industry. Founded in 1920 in Park Lane, Wolverhampton, as a car gearbox maker, they expanded into petrol engines in 1922 and in the 1930s built a large factory in Fallings Park, Wolverhampton.
Opel Blitz was the name given to various light and middle-weight trucks built by the German Opel automobile manufacturer between 1930 and 1975. The original logo for this truck, two stripes arranged loosely like a lightning symbol in the form of a horizontally stretched letter "Z", still appears in the current Opel logo. The Blitz name was then applied to the British-made Bedford CF when it replaced the Blitz in certain markets.
Duple Coachbuilders was a coach and bus bodybuilder in England from 1919 until 1989.
Bedford Vehicles, usually shortened to just Bedford, was a brand of vehicle manufactured by Vauxhall Motors, then a subsidiary of multinational corporation General Motors. Established in April 1931 and constructing commercial vehicles, Bedford Vehicles was a leading international lorry brand, with substantial export sales of light, medium, and heavy lorries throughout the world.
The Bedford TJ is a truck that was produced by Bedford and their successors from 1958 to 1998, as a replacement for the earlier Bedford A series of medium-duty trucks that were produced between 1953 and 1958. The truck was the last bonneted truck produced by the company, and the last vehicle to be produced to have a relation with Bedford Vehicles.
The Bedford TM was a heavy goods vehicle manufactured by Bedford between 1974 and 1986. Up until the TM, Bedford had been building mostly low-specification short haul distribution trucks, such as the Bedford TK and KM. In view of the increasing popularity of high cabs in the maximum weight long distance category, such as the Leyland Marathon, Scania L110 and Volvo F88, Bedford designed the TM as a competitor.
The Bedford CA was a distinctive pug-nosed light commercial vehicle produced between 1952 and 1969 by Bedford in Luton, England.
The Bedford HA was a car derived van introduced in 1963 by Bedford, based on the Vauxhall Viva (HA) family car. It was also known as the Bedford Beagle in estate form and Bedford Roma in small campervan form. The Beagle was an officially sanctioned conversion based on the 8 cwt van, carried out by Martin Walter of Folkestone, Kent. The Beagle received rear side windows and a fold-down rear seat; leaving 28 inches (710 mm) of luggage space with the seat in use.
The Bedford CF was a range of full-size panel vans produced by Bedford. The van was introduced in 1969 to replace the CA model, and was sized to compete directly with the Ford Transit, which had entered production four years earlier. Its design was similar to its American counterpart, the Chevrolet Van (1971-1995).
The Ford B series is a bus chassis that was manufactured by the Ford Motor Company. Produced across six generations from 1948 to 1998, the B series was a variant of the medium-duty Ford F series. As a cowled-chassis design, the B series was a bare chassis aft of the firewall, intended for bodywork from a second-stage manufacturer. While primarily used for school bus applications in the United States and Canada, the chassis was exported worldwide to manufacturers to construct bus bodies for various uses.
The Bedford SB was a front-engined bus chassis manufactured by Bedford in England. It was launched at the 1950 Commercial Motor Show as the replacement for the Bedford OB.
The Bedford TL was a truck manufactured by Bedford. Launched in June 1980, the TL was intended to complement the Bedford TK, on which it was heavily based. One of the main advantages of the TL over the TK was the incorporation of a tilt cab, improving maintenance. A tilt cab was a feature of the TK's main competitor, the Ford D series, and had long been seen as a major advantage.
The Commer FC was a commercial vehicle produced by Commer from 1960 to 1976. During its lifespan, it was developed into the Commer PB in 1967, and the Commer SpaceVan in 1974. After the Rootes Group, which owned Commer, was purchased by Chrysler, the SpaceVan was also sold under the Dodge and Fargo marques. From 1976 onwards, the van was only sold as the Dodge SpaceVan, and it remained in production until 1983.
The Bedford Y series was a family of single-decker bus and single-decker coach chassis manufactured by Bedford from 1970 to 1986, when Bedford ceased bus and truck production.
 | Wikimedia Commons has media related to Bedford VAM . |