Bedford MW | |
---|---|
Type | General service truck |
Place of origin | United Kingdom |
Service history | |
In service | 1939–late 1950s |
Used by | British Army, Royal Air Force & Royal Navy |
Wars | Second World War |
Production history | |
Designer | Bedford Vehicles |
Designed | 1937 |
Manufacturer | Bedford Vehicles |
No. built | More than 66,000 |
Specifications | |
Mass | 2.1 long tons (2.1 t) |
Length | 14 ft 4 in (4.37 m) |
Width | 6 ft 6 in (1.98 m) |
Height | 7 ft 6 in (2.29 m) |
Crew | 2 |
Engine | Six-cylinder inline Bedford OHV 210 cu in (3.5 L) petrol 72 bhp (54 kW) at 3,000rpm |
Payload capacity | 15 long cwt (760 kg) |
Drive | Wheeled 4x2 |
Transmission | 4 forward, 1 reverse |
Suspension | Live axles on semi-elliptical multi leaf springs |
Maximum speed | 40 mph (64 km/h) |
References | Chris Bishop [1] & Pat Ware [2] |
The Bedford MW was a general service truck used by the British Armed Forces during the Second World War.
The Bedford MW was a 15 cwt (760 kg) 4x2 truck, powered by a Bedford 72 bhp (54 kW) six-cylinder inline 210 cu in (3.5 L) petrol engine through a four speed transmission. [1] [2]
Despite lacking four wheel drive and so being unsuited for off road use, the MW's powerful engine, short wheel base, low centre of gravity and relatively light weight gave it excellent acceleration and almost sports car like handling. [2]
The early MWs were open cabbed with a folding windscreen and a collapsible canvas tilt, from 1943 an enclosed cab with doors and perspex side screens was added, retaining the canvas top. The vehicle had a distinctive wide bonnet, necessitated by the need to accommodate a special extra large air filter that was never fitted to production vehicles. [1] [2]
In 1935 the War Office issued specifications for a new 15 cwt 4x2 military truck for service with the British Army, inviting manufacturers to submit designs to take part in annual comparative trials in north Wales, one entrant was a modification of a Bedford Vehicles 2-ton rear wheel drive lorry. Following these trials Bedford fitted a larger radiator and larger tyres, the trials were repeated in 1936 after which Bedford modified the chassis to increase ground clearance and installed a new engine cooling system. For the 1937 trials a new special Bedford WD-1 prototype was produced with a 15 cwt payload, it performed admirably and in 1938 the eventual 72 bhp (54 kW) engine was installed. [1] [2]
Between 1939 and 1945 Bedford produced over 66,000 MWs, the vehicles remained in British service until the late 1950s. [1] [2]
The MW was intended mainly to be a workhorse for the British Army's infantry battalion s, but throughout the war it was adapted to a number of roles and was eventually also used by the Royal Air Force, Royal Navy, other government departments and some overseas customers. [1] [2]
The Bedford MW was built in multiple variants including: [2]
The FV4201 Chieftain was the main battle tank of the United Kingdom during the 1960s-1990s
The Ordnance Quick-Firing 6-pounder 7 cwt, or just 6-pounder, was a British 57 mm gun, serving during the Second World War as a primary anti-tank gun of both the British and United States Army. It was also used as the main armament for a number of armoured fighting vehicles.
The Loyd Carrier was one of a number of small tracked vehicles used by the British and Commonwealth forces in the Second World War to transport equipment and men about the battlefield. Alongside the Bren, Scout and Machine Gun Carriers, they also moved infantry support weapons.
The Morris Commercial C8 FAT, commonly known as a Quad, is an artillery tractor used by the British and Commonwealth forces during the Second World War. It was used to tow field artillery pieces, such as the 25-pounder gun-howitzer, and anti-tank guns, such as the 17-pounder.
The AEC Matador was a heavy 4×4 truck and medium artillery tractor built by the Associated Equipment Company for British and Commonwealth forces during World War II. AEC had already built a 4×2 lorry, also known as the Matador.
Bedford Vehicles, usually shortened to just Bedford, was a brand of vehicle manufactured by Vauxhall Motors, then a subsidiary of multinational corporation General Motors. Established in April 1931 and constructing commercial vehicles, Bedford Vehicles was a leading international lorry brand, with substantial export sales of light, medium, and heavy lorries throughout the world.
An artillery tractor, also referred to as a gun tractor, is a specialized heavy-duty form of tractor unit used to tow artillery pieces of varying weights and calibres. It may be wheeled, tracked, or half-tracked.
The AEC Mk I Gun Carrier, known as Deacon, was a British armoured fighting vehicle of the Second World War. It was an attempt to make the QF 6 pounder anti-tank gun into a self-propelled artillery piece. It was employed only during the North African Campaign from 1942 to 1943.
The Sd.Kfz. 7 was a half-track military vehicle used by the German Wehrmacht Heer, Luftwaffe and Waffen-SS during the Second World War. Sd.Kfz. is an abbreviation of the German word Sonderkraftfahrzeug, "special purpose vehicle". A longer designation is Sd.Kfz. 7 mittlerer Zugkraftwagen 8t, "medium towing motor vehicle 8t".
Portée describes the practice of carrying an artillery piece on a truck which can be fired from the vehicle or quickly dismounted and fired from the ground. The term is most often used to describe anti-tank equipments used by the British, Commonwealth and imperial forces in the Western Desert Campaign of the Second World War. Modern terms for mounting weapons on vehicles are technical or gun truck.
Tanks of the Second World War
The Bedford CA was a distinctive pug-nosed light commercial vehicle produced between 1952 and 1969 by Bedford in Luton, England.
Canadian Military Pattern (CMP) trucks were mutually coherent ranges of military trucks, made in large numbers, in several classes and numerous versions, by Canada's branches of the U.S. 'Big Three' auto-makers during World War II, compliant to British Army specifications, primarily intended for use in the armies of the British Commonwealth allies, but also serving in other units of the British Empire.
The Thornycroft Hathi was an early four wheel drive lorry built by Thornycroft in the 1920s. It was used by the British Army as an artillery tractor.
The Bedford OY is an army lorry (truck built by Bedford for the British Armed Forces and introduced in 1939. It was based on Bedford's O-series commercial vehicles with a modified front end and single rear tyres. It was designed for a 3-ton payload. The OYD was a general service vehicle, while the OYC was a tanker version for carrying water or petrol. These vehicles were widely used during, and after, World War II but were later superseded by the Bedford RL.
The Bedford QL was a series of trucks, manufactured by Bedford for use by the British Armed Forces in the Second World War.
The Pierce-Arrow armoured AA lorry was a self-propelled anti-aircraft carrier mounting a QF 2-pounder AA "pom-pom" gun, it was used by the Royal Marine Artillery during the First World War.
The SAMIL 20 is a 2-ton cargo vehicle produced in South Africa in the mid 1980's and was used as at the primary light cargo carrier of the South African Defence Force. The vehicle design is based on the German Mercedes Unimog chassis and Mark I of this vehicle was based on the Magirus Deutz 130M7FAL 4x4 engine. In Mark II, the engine was replaced with a South African license built water cooled diesel engine. The vehicle is still in use within the South African National Defence Force.
The Morris Commercial CS8, also known as the "Morris 15 cwt" was a British light military truck of the Second World War.
Wikimedia Commons has media related to Bedford MW . |