Stevens Model 77E

Last updated
Stevens Model 77E
Type Shotgun [1]
Place of originUnited States [1]
Service history
In service1963-Present
Used by Army of the Republic of Vietnam [1]
United States Army [1]
United States Marine Corps [1]
Wars Vietnam War [1]
Production history
Manufacturer Stevens Arms [1]
Produced1963 [1]
No. built69,700 [2]
Specifications
Barrel  length20 in (51 cm) [1]

Caliber 12-gauge [1]
Action Pump-action [1]
Feed systeminternal tube magazine

The Stevens Model 77E was a pump-action shotgun offered in 12 gauge, 16 gauge, 20 gauge, 28 gauge, and 410 gauge. The military version 77E was the most widely used shotgun of the Vietnam War. It was a short-barreled pump-action shotgun known variously as the "trench" or "riot" shotgun in 12 gauge. The Military Model 77E had a noticeably shorter stocks than similar United States military shotguns built by Ithaca Gun Company, Remington Arms, and Winchester Repeating Arms Company. These short stocks were intended to accommodate South Vietnamese soldiers, and the Military Model 77E was the first United States combat shotgun equipped with a rubber recoil pad. Military Model 77E shotguns were Parkerized with sling swivels and wooden stocks. Receivers were marked "U.S." and "p" proofmarks appeared on both barrels and receivers. [1]

A few prototypes were fitted with bayonet adapters, but none are known to have been issued. A few Stevens Model 69R shotguns also saw service during the Vietnam War. The Model 77E gave satisfactory service, but proved less durable than the Ithaca Model 37. Breakage at the point of attachment of the buttstock to the receiver was the most common complaint. [1]

Users

Related Research Articles

A shotgun is a long-barreled firearm designed to shoot a straight-walled cartridge known as a shotshell, which usually discharges numerous small pellet-like spherical sub-projectiles called shot, or sometimes a single solid projectile called a slug. Shotguns are most commonly smoothbore firearms, meaning that their gun barrels have no rifling on the inner wall, but rifled barrels for shooting slugs are also available.

The Winchester Model 1897, also known as the Model 97, M97, or Trench Gun, is a pump-action shotgun with an external hammer and tube magazine manufactured by the Winchester Repeating Arms Company. The Model 1897 was an evolution of the Winchester Model 1893 designed by John Browning. From 1897 until 1957, over one million of these shotguns were produced. The Model 1897 was offered in numerous barrel lengths and grades, chambered in 12 and 16 gauge, and as a solid frame or takedown. The 16-gauge guns had a standard barrel length of 28 inches, while 12-gauge guns were furnished with 30-inch length barrels. Special length barrels could be ordered in lengths as short as 20 inches, and as long as 36 inches. Since the time the Model 1897 was first manufactured it has been used by American soldiers, police departments, and hunters.

Savage Arms is an American gunmaker based in Westfield, Massachusetts, with operations in Canada. Savage makes a variety of rimfire and centerfire rifles, as well as Stevens single-shot rifles and shotguns. The company is best known for the Model 99 lever-action rifle, no longer in production, and the .300 Savage. Savage was a subsidiary of Vista Outdoor until 2019 when it was spun off.

Mossberg 500 Series of pump-action shotguns

The Mossberg 500 (M500) is a series of pump action shotguns manufactured by O.F. Mossberg & Sons. The 500 series comprises widely varying models of hammerless repeaters, all of which share the same basic receiver and action, but differ in bore size, barrel length, choke options, magazine capacity, stock and forearm materials. Model numbers included in the 500 series are the 500, 505, 510, 535, and 590. The Revelation 310 and the New Haven 600 were also variations of the 500 series produced by Mossberg under different names. By 2021, 11,000,000 M500s had been produced, making it the most-produced shotgun of all time.

A combat shotgun is a shotgun issued by militaries for warfare. The earliest shotguns specifically designed for combat were the trench guns or trench shotguns issued in World War I. While limited in range, the multiple projectiles typically used in a shotgun shell provide increased hit probability unmatched by other small arms.

Pump action or slide action is a repeating firearm action that is operated manually by moving a sliding handguard on the gun's forestock. When shooting, the sliding forend is pulled rearward to eject any expended cartridge and typically to cock the hammer/striker, and then pushed forward to load (chamber) a new cartridge into the chamber. Most pump-action firearms use an integral tubular magazine, although some do use detachable box magazines. Pump-action is typically associated with shotguns, although it has been used in rifles and other firearms as well.

The Remington Model 870 is a pump-action shotgun manufactured by Remington Arms Company, LLC. It is widely used by the public for shooting sports, hunting and self-defense, as well as by law enforcement and military organizations worldwide.

The Winchester Model 70 is a bolt-action sporting rifle. It has an iconic place in American sporting culture and has been held in high regard by shooters since it was introduced in 1936, earning the moniker "The Rifleman's Rifle". The action has some design similarities to Mauser designs and it is a development of the earlier Winchester Model 54, itself based on a Mauser 98-type action.

Ithaca 37 Shotgun

The Ithaca 37 is a pump-action shotgun made in large numbers for the civilian, military, and police markets. Based on a 1915 patent by firearms designer John Browning for a shotgun initially marketed as the Remington Model 17, it utilizes a novel combination ejection/loading port on the bottom of the gun which leaves the sides closed to the elements.

The Remington 1100 is a gas-operated semi-automatic shotgun introduced by Remington Arms in 1963.

The Winchester Model 1912 is an internal-hammer pump-action shotgun with an external tube magazine. Popularly named the Perfect Repeater at its introduction, it largely set the standard for pump-action shotguns over its 51-year high-rate production life. From August 1912 until first discontinued by Winchester in May 1964, nearly two million Model 12 shotguns were produced in various grades and barrel lengths. Initially chambered for 20 gauge only, the 12 and 16 gauge versions came out in 1913, and the 28 gauge version came out in 1934. A .410 version was never produced; instead, a scaled-down version of the Model 12 known as the Model 42, directly derived from scaled drawings of the Model 12, was produced in .410.

MAG-7 Pump-action shotgun

The MAG-7 is a pump-action shotgun manufactured by Techno Arms PTY of South Africa since 1995.

The Browning Automatic 5, most often Auto-5 or simply A-5, is a recoil-operated semi-automatic shotgun designed by John Browning. It was the first successful semi-automatic shotgun design, and remained in production until 1998. The name of the shotgun designates that it is an autoloader with a capacity of five rounds, four in the magazine and one in the chamber. Remington Arms and Savage Arms sold variants called the Remington Model 11 and Savage Model 720 that were nearly identical but lacked the magazine cutoff found on the Browning.

Stevens Arms American firearms manufacturer

Stevens Arms was an American firearms manufacturer founded by Joshua Stevens in 1864 in Chicopee, Massachusetts. The company introduced the .22 Long Rifle round and made a number of rifle, shotgun, and target pistol designs. By 1902, they were advertising themselves as "the largest producers of sporting arms in the world". They were purchased by New England Westinghouse on May 28, 1915, and again by Savage Arms on April 1, 1920. As a division of Savage, Stevens continued to produce firearms at their Chicopee Falls facility until 1960 when the plant was torn down and Stevens production was moved into other Savage facilities. Savage dropped the Stevens name in 1991, but revived it in 1999 and still uses it today for a number of its low cost rifles and shotguns.

The Remington Model 31 is a pump-action shotgun that competed with the Winchester Model 1912 for the American sporting arms market. Produced from 1931 to 1949, it superseded the John Pedersen-designed Models 10 and 29, and the John Browning-designed Model 17. It was replaced by the less expensive to manufacture Model 870 in 1950.

The Fabarm FP6 is a pump-action combat shotgun that was manufactured by the Italian firearms company Fabbrica Bresciana Armi S.p.A. (FABARM) and sold by Heckler & Koch. It was intended for civilian and law enforcement use.

Remington Model 10 Shotgun

The Remington Model 10 is a pump-action shotgun designed by John Pedersen for Remington Arms. It has an internal striker within the bolt and a tube magazine which loaded and ejected from a port in the bottom of the receiver. An updated version, the Model 29, was introduced in 1930 with improvements made by C.C. Loomis.

Savage Model 24 Savage combination gun

The Savage Model 24 is an American made over-and-under combination gun manufactured by Savage Arms. The basic .22LR over .410 gauge model weighs 7 pounds, has 24-inch barrels and an overall length of 41-inches. It may also be disassembled for ease of stowage.

The Stevens Model 520 was a pump-action shotgun developed by John Browning and originally manufactured by the J Stevens Arms & Tool Company between 1909 and 1916. Stevens was sold to New England Westinghouse on 28 May 1915 and production of civilian firearms was greatly reduced. The company was renamed the "J Stevens Arms Company" on 1 July 1916 and New England Westinghouse used their manufacturing facility in Chicopee Falls, MA to produce Mosin-Nagant rifles under contract for the Russian Czar during World War I. After the war, Stevens was sold to Savage Arms on 1 April 1920 and full production of civilian firearms resumed. Under Savage ownership, Model 520 production continued until 1939 when it was replaced by the Model 520A which ended production in 1948. Stevens also further modified the design when they introduced the streamlined Model 620 in 1927. The Model 620 was internally similar to the Model 520 and was produced until 1939 when it was replaced by the Model 620A which ended production in 1955. This shotgun is a hammerless, pump action, take-down design with a tubular magazine which holds 5 shells. All models can also be slam fired: the shotgun has no trigger disconnector and shells can be fired one after the other simply by working the slide if the trigger is held down.

Hawk Industries Type 97 Depending on variant:

The Hawk Industries Type 97 is the factory and official Chinese military and police designation of a shotgun design patterned after the Remington Model 870 manufactured by Hawk Industries, a division of the China North Industries Corporation. The Type 97 is the base design of a variety of models with multiple configurations to suit different purposes and applications.

References

  1. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Canfield, Bruce N. (March 2002). "Combat Shotguns of the Vietnam War". American Rifleman . pp. 44–47&92–95.
  2. DK Publishing (Dorling Kindersley) Gun Penguin (2012) ISBN   146540354X p.253