 | This article needs additional citations for verification .(January 2010) |
Stewarts & Lloyds was a steel tube manufacturer with its headquarters in Glasgow at 41 Oswald Street. The company was created in 1903 by the amalgamation of two of the largest iron and steel makers in Britain: A. & J. Stewart & Menzies, Coatbridge, North Lanarkshire, Scotland; and Lloyd & Lloyd, Birmingham, England.
A. & J. Stewart & Menzies Ltd. was founded as A. & J. Stewart. Andrew Stewart was originally employed as a salesman by Eadies of Dalmarnock, South Lanarkshire, specialists in the manufacture of lap-welded and loose flange tubes. Stewart saw a market for gas pipe, but the company would not acknowledge his proposals. In 1860, Andrew set up business as a maker of butt-welded and lap-welded tubes, establishing a small works at St Enochs, Glasgow, taking his brother James into partnership in 1862. [1] The company met with rapid success, and in 1867 moved to a large site at Coatbridge, North Lanarkshire, where it built the Clyde Tube Works. In 1882 the company was incorporated with limited liability as A. & J. Stewart Ltd.
In 1889 Andrew saw his sons set up their own business in Glasgow as tube manufacturers under the name of Stewart Brothers. In a rationalisation of the tube making industry in Scotland, A. & J. Stewart Ltd merged with Stewart Brothers and the Clydesdale Iron & Steel Company becoming A. & J. Stewart & Clydesdale Ltd. but in 1898, the company took on another new name when it acquired the business of James Menzies & Company becoming A. & J. Stewart & Menzies Ltd. From 1 January 1903 the company merged with English counterparts Lloyd & Lloyd Ltd.
The history of Lloyd & Lloyd Ltd closely paralleled that of A. & J. Stewart, establishing itself as one of the largest iron and steel tube manufacturers in England. It was founded in 1859 by Samuel Lloyd and his cousin William Rigge Lloyd, and its premises were at Nile Street, Birmingham. Over the next 40 years it became the premier manufacturer of tubes in England. The Clydeside Tube Co. Ltd., makers of weldless tubes was acquired by Lloyd & Lloyd in 1900 and was also brought into the 1903 merger. Samuel's son Albert William was a director of Lloyd & Lloyd when the merger with Stewarts & Menzies came about in 1903 and then became a director of the newly formed company of Stewarts & Lloyds. From the date of the merger, Samuel Lloyd had nothing to do Stewarts & Lloyds and concentrated on Lloyds Ironstone Company, with his son Samuel Janson Lloyd.
Iron ore had been mined in the Corby, Northamptonshire area for some time, when Samuel Lloyd came to the village in 1880 and negotiated the purchase of the mineral rights for the Manor of Corby. Extraction commenced in the following year and the ore was then transported by rail to the Albion Works in the West Midlands. Lloyds Ironstone Company, who erected two blast furnaces on the edge of the village in 1910, started iron production but the main problem was the extraction of the ore itself, the physical act of getting the ore from the ground was in need of mechanization and before the end of the 19th century a mechanical digger, with a bucket capable of holding 11 cubic yards arrived in the mines. To increase production further a steam shovel, after finishing work on the construction of the Manchester Ship Canal, was brought to Corby. Its bucket could hold nearly three times the amount of its earlier, smaller brother. In 1918, Samuel Lloyd died and control passed to Samuel Janson Lloyd, who in 1919 brokered a merger with Alfred Hickman & Sons, of Bilston, which in turn was absorbed into the Stewarts & Lloyds group of companies in 1920, thus bringing the Corby site under Stewarts & Lloyds control. [2]
The newly merged company, now named Stewarts & Lloyds Ltd set about to establish its position and extending its interests. In 1908 the company became colliery owners when they acquired the control of Robert Addie & Sons (Collieries) Ltd., although this interest was sold in 1924. Before the outbreak of the First World War the company bought the British Welding Co of Motherwell, manufacturer of hydraulic welded tubes and established a new works at Tollcross, Glasgow. Following the end of the war the company gained control of the Northern Lincolnshire Iron Company, followed shortly afterwards by Alfred Hickman & Sons and its subsidiaries.
Expansion of the sphere of the company continued in the latter 1920s, gaining in the UK 70% control of the Victaulic Company Limited, producer of Victaulic joints and Johnson couplings (which were not produced until the 1930s) for pipelines, the Pothero Steel Tube Co Ltd and then the Birmingham steelworks of John Russell & Company. [3] [4]
Further colliery interests were acquired when in 1923 the company gained control of Kilnhurst Colliery in the South Yorkshire coalfield, although this was sub-leased to Sheffield steelmakers John Brown & Company This interest was sold, along with its adjoining brickworks, to the Tinsley Park Colliery Company of Sheffield in 1936.
In 1930, Stewarts & Lloyds Ltd entered into an agreement with Tube Investments, of Abingdon, Oxfordshire, which controlled a large number of tube making firms in the Midlands. Although this was to “facilitate exchange of information and technology” it resulted in S & L gaining a half interest in the Bromford Tube Co of Erdington, Birmingham, acquiring the other half in 1945; and in Howell & Co Ltd, Sheffield, this being given up in 1938.
From the late 1800s, both founding companies had been represented in Australia as distributors of tube. Growing demand in Australia eventually led to the formation of a jointly owned company with BHP to be known as Buttweld Pty Ltd, and the establishment of Australia's first tubemaking plant at Newcastle in 1935. [5] [6] This company ultimately became Tubemakers of Australia. [7]
The company decided to move to Corby, Northamptonshire ( 52°29′54″N0°39′46″W / 52.498414°N 0.662788°W ), in November 1932, enabling it to make use of the local iron ore to feed their blast furnaces and Bessemer steel converters. The new construction was carried out to a very tight timetable, from the clearing of the site in 1933 the first of the Corby blast furnaces was lit in May the following year. This was followed by coke from the new coke ovens the following month and the ore preparation and Sinter Plants in September. No.2 blast furnace was lit in November and the first steel came from the Bessemer converters on 27 December. The last of the originally planned blast furnaces (No.3) was lit in October 1935. Following a rebuild to increase capacity of No.2 furnace, Corby works became the third-most economic pig iron producing plant in the world.
Looking for greater capacity, in 1936, a fourth blast furnace, a second sinter plant, a new Bessemer plant, and new coking capacity, six new ovens being added to the existing battery and a new battery of 21 ovens were constructed and in operation by the end of 1937.
To add to steel production two electric arc furnaces were built in 1941. The ingots cast from the electric furnace were of a different shape and size to any others and were shipped to Bilston for further processing.
By 1953, the company, making use of its original eight work sites, became the main producer of steel tubes in Scotland, producing around 250,000 tons of tubing, the bulk of which were used at the Corby site.
Further developments took place after World War II, with an open-hearth steel making facility being commissioned in 1949. The Glebe coke ovens were extended to their maximum number of 141 in 1953, and plans for No. 6 coke oven battery were formulated shortly afterward. These were to be built on old quarry workings to the north of the Open-Hearth building, and enough land was levelled to accommodate a complete blast furnace plant as well as for the coke ovens by-products plant and gasholder. No. 6 battery of 51 ovens was commissioned in 1961; however, after the footings were installed for the blast furnace, the rest of the construction was put temporarily on hold, and work was never continued.
In an attempt to make the Bessemer plant more efficient it was trialled with a blast enriched with oxygen, but when a basic oxygen steelmaking test plant was built in 1960, a major change in steel production at the works was signalled. Trials were conducted using the BOS process; and in 1965, with a three-vessel plant coming on stream, the Bessemer plant closed, having produced almost 18 million tons of steel since 1934.
In common with other steel producers, from the outbreak of World War II, much of the output went to war-related usage. The best-known contribution of the works was Pipe Line Under The Ocean (PLUTO), a pipeline built, following the Normandy landings to supply fuel for the invading forces. Almost 1,000 miles of steel tubes went into the main HAMEL project. In acknowledgement of the Corby steelworks' contribution to PLUTO, a public house in Corby was named The Pluto. The pub has since closed and the site is awaiting development.
Another large contribution was the 15,000 miles of tube, used for the construction of beach defences, termed Admiralty scaffolding. These were then covered with barbed wire, and other, more dangerous obstructions, becoming known as Wallace Swords.[ clarification needed ][ citation needed ] A total of over 275,000 miles (about 2.5 million tons) of tube were produced for war-related work during 1939–45. Other works in the S&L group provided steel for shell forgings, finished shells and shot.
The steel industry was nationalised for the second time, and the company became part of the British Steel Corporation in 1967.
Due to the high cost and low quality of local iron ore, steel production at Corby was set to close in November 1979. This was delayed until 21 May 1980, due to a national steel strike, when the last coil came off the mill. In nearly 40 years of steel production they had made almost 2.5 million tons. Tubemaking continues to this day, initially based on steel supplied from Teesside, and today Tata Steel Tubes is the largest customer of steel from South Wales.
Steelmaking is the process of producing steel from iron ore and/or scrap. In steelmaking, impurities such as nitrogen, silicon, phosphorus, sulfur and excess carbon are removed from the sourced iron, and alloying elements such as manganese, nickel, chromium, carbon and vanadium are added to produce different grades of steel.
Algoma Steel Inc. is an integrated primary steel producer located on the St. Marys River in Sault Ste. Marie, Ontario, Canada. Its products are sold in Canada and the United States as well as overseas. Algoma Steel was founded in 1902 by Francis Clergue, an American entrepreneur who had settled in Sault Ste. Marie. The company emerged from bankruptcy protection in 2004. In April 2007, Algoma Steel was purchased by India's Essar Group for US$ 1.63 billion, continuing operations as a subsidiary known as Essar Steel Algoma Inc. It was purchased again in 2017, by a group of US investors.
A steel mill or steelworks is an industrial plant for the manufacture of steel. It may be an integrated steel works carrying out all steps of steelmaking from smelting iron ore to rolled product, but may also be a plant where steel semi-finished casting products are made from molten pig iron or from scrap.
Anthracite iron or anthracite pig iron is iron extracted by the smelting together of anthracite coal and iron ore, that is using anthracite coal instead of charcoal in iron smelting. This was an important technical advance in the late-1830s, enabling a great acceleration of the Industrial Revolution in the United States and in Europe.
An ironworks or iron works is an industrial plant where iron is smelted and where heavy iron and steel products are made. The term is both singular and plural, i.e. the singular of ironworks is ironworks.
Wheeling-Pittsburgh Steel was a steel manufacturer based in Wheeling, West Virginia.
IISCO Steel Plant of Steel Authority of India Limited is an integrated steel plant located at Burnpur, a neighbourhood in Asansol city, in the Asansol subdivision of Paschim Bardhaman district, West Bengal, India.
The Colorado Fuel and Iron Company (CF&I) was a large steel conglomerate founded by the merger of previous business interests in 1892. By 1903 it was mainly owned and controlled by John D. Rockefeller and Jay Gould's financial heirs. While it came to control many plants throughout the country, its main plant was a steel mill on the south side of Pueblo, Colorado, and was the city's main industry for most of its history. From 1901 to 1912, Colorado Fuel and Iron was one of the Dow Jones Industrials. The steel-market crash of 1982 led to the decline of the company. After going through several bankruptcies, the company was acquired by Oregon Steel Mills in 1993, and changed its name to Rocky Mountain Steel Mills. In January 2007, Rocky Mountain Steel Mills, along with the rest of Oregon Steel's holdings, were acquired by EVRAZ Group, a Russian steel corporation, for $2.3 billion.
Seend Ironstone Quarry and Road Cutting is a 3 acres (1.2 ha) Geological Site of Special Scientific Interest at Seend in Wiltshire, England, notified in 1965. The site contains facies of Lower Greensand containing specimens of fauna not found elsewhere.
The United Steel Companies was a steelmaking, engineering, coal mining and coal by-product group based in South Yorkshire and Lincolnshire, England.
The Ravenscraig steelworks, operated by Colvilles and from 1967 by British Steel Corporation, consisted of an integrated iron and steel works and a hot strip steel mill. They were located in Motherwell, North Lanarkshire, Scotland.
The Tennessee Coal, Iron and Railroad Company (1852–1952), also known as TCI and the Tennessee Company, was a major American steel manufacturer with interests in coal and iron ore mining and railroad operations. Originally based entirely within Tennessee, it relocated most of its business to Alabama in the late nineteenth century, following protests over its use of free convict labor. With a sizable real estate portfolio, the company owned several Birmingham satellite towns, including Ensley, Fairfield, Docena, Edgewater and Bayview. It also established a coal mining camp it sold to U.S. Steel which developed it into the Westfield, Alabama planned community.
The Duluth Works was an industrial steel and cement manufacturing complex located in Duluth, Minnesota, United States, in operation 1915 to 1987. The complex was operated by the United States Steel Corporation. Officially, the plant's purpose was to supply the growing Midwest with steel finished products. Unofficially, they were built as part of a "gentleman's agreement" between U.S. Steel and the State of Minnesota to not impose hefty iron ore taxes on U.S. Steel in exchange for a fully integrated steel plant within Minnesota, whose mines furnished 80% of the ore to U.S. Steel. The combined works of the steel and cement plant were the largest employers in Duluth and the fourth largest industrial complex in Minnesota.
The Teesside Steelworks was a large steelworks that formed a continuous stretch along the south bank of the River Tees from the towns of Middlesbrough to Redcar in North Yorkshire, England. At its height there were 91 blast furnaces within a 10-mile radius of the area. By the end of the 1970s there was only one left on Teesside. Opened in 1979 and located near the mouth of the River Tees, the Redcar blast furnace was the second largest in Europe.
The Woodward Iron Company was founded on December 31, 1881, by brothers William and Joseph Woodward. William was the company president and Joseph was the company secretary. The company operated iron and coal mines, quarries and furnaces; these were connected by a private industrial railroad based in Bessemer, Alabama. The company administrative office was located near Woodward Ore Mine #1, south of Paul's Hill in Bessemer.
Ebbw Vale Steelworks was an integrated steel mill located in Ebbw Vale, South Wales. Developed from 1790, by the late 1930s it had become the largest steel mill in Europe. It was nationalised after World War II. As the steel industry changed to bulk handling, iron and steel making was ceased in the 1970s, and the site was redeveloped as a specialised tinplate works. It was closed by Corus in 2002, but is being redeveloped in a joint partnership between Blaenau Gwent Council and the Welsh Government.
In 2022, the United States was the world’s third-largest producer of raw steel, and the sixth-largest producer of pig iron. The industry produced 29 million metric tons of pig iron and 88 million tons of steel. Most iron and steel in the United States is now made from iron and steel scrap, rather than iron ore. The United States is also a major importer of iron and steel, as well as iron and steel products.
The Clyde Iron Works was a Scottish-based ironworking plant which operated from 1786 to 1978.
The Lithgow Blast Furnace is a heritage-listed former blast furnace and now park and visitor attraction at Inch Street, Lithgow, City of Lithgow, New South Wales, Australia. It was built from 1906 to 1907 by William Sandford Limited. It is also known as Eskbank Ironworks Blast Furnace site; Industrial Archaeological Site. The property is owned by Lithgow City Council. It was added to the New South Wales State Heritage Register on 2 April 1999.
| International | |
|---|---|
| National | |
