Technology gap

Last updated

Technology Gap Theory is a model developed by M.V. Posner in 1961, which describes an advantage enjoyed by the country that introduces new goods in a market. [1] The country will enjoy a comparative advantage as well as a temporary state of monopoly until other countries have achieved the ability to imitate the new good. Unlike the past theories which assume the market to be fixed and given, such as the Heckscher-Ohlin theory, the technology gap model addresses the technological changes. It suggests a state of economy influenced by science, politics, markets, culture and most importantly, uncertainty, which threatens the mainstream neoclassical economists as they explain economic outcomes mainly based on the natural endowment scarcity. The theory is backed up by the ideas of Joseph Schumpeter. As a result, the technology gap theory is often rejected by neoclassical economists. [2]

Contents

The theory assumes that the two countries have similar factor endowments, demand conditions, and factor price ratios before trade. The only difference is the technique. The technology gap exists between the time the new products are imported from external markets and the substitutes are created by domestic producers. Meanwhile, according to Ponser, the gap is constituted by three lags as follows: [3]

  1. Foreign Reaction Lag: The time required for the innovative firms to produce the products with new technology, and these products will later be exported to external countries.
  2. Domestic Reaction Lag: The time taken by all domestic firms to continue producing relatively newer versions of products as to retain their shares in the global market, before they realize the threat of the new products imported. Within the period, there is also an imitation lag, which suggests the time the local entrepreneurs need to learn to adopt the new technology to make and sell substitutes.
  3. Demand Lag: The time that the domestic consumers need to acquire or adapt their tastes for the new products.

The total lag is calculated by subtracting the demand lag from the imitation lag. If the demand lag is longer than the imitation lag, then the domestic market will start to demand the foreign goods. The demand of imported goods overriding the domestic products will in turn leads to the erosion of the local market and deficit in the trade balance. [3]

History

Fig.1 The International Product Life Cycle by Raymond Vermon Product based theory of economic cycles.png
Fig.1 The International Product Life Cycle by Raymond Vermon

The development of an explicit technology gap model started with Ponser. The key for the theory is the rate of diffusion of technology. Moving on to 1966, Vernon further extended the technology gap model into the product life-cycle theory. [2] The degree of maturity of the technology became the new key of the dynamic economic trade. Vernon's theory resonances with the technology gap theory. As Fig1. shows, at the new-product phase, the product is only produced and consumed in the innovating countries, usually the developed countries. But, as the product matures, the imitating countries, usually the developing countries, intervenes the market by underselling the products. The production of the product gradually gets standardized and the innovating countries can no longer monopolize the market. [4]

In 1981, Pasinetti proposed a Ricardian comparative advantage model that emphasizes on the rate of innovation. Later, Dosi and his colleagues affirmed technology gap as the heart of absolute advantage in 1990. Moreover, Dosi et al. complicated the definition of diffusion, which makes a smooth diffusion process does not exist anymore. [5] The new definition now writes as: the "process of learning, modification of the existing organization of production and, often, even a modification of products." [6]

Between countries

Technological changes is cumulative, path-dependent, and non-specific for each country. Thus, it is hardly sharable between nations. Nowadays, it can determine the competence of a nation to a great extent, and influence demand conditions and technological policies. As a result, the technology gap theory strongly emphasizes on the role of government in prompting innovations. [2]

United States, as one of the most technologically advanced nations in the world, exports a variety of new technology to conquer the global market. Most of the time, other countries acquire the same technology sooner or later. With lower labor costs, U.S. no longer hold the comparative advantage in making the same products. However, U.S. producers can keep on introducing new technology to the markets abroad and new technology gap will be formed during the process. [4]

As long as the new technology is diffused to developing countries, the globalization will have a positive impact on them, otherwise, the domestic market will only be harmed. [6] African countries, for example, Kenya, are currently suffering from the technology gap not only globally but also domestically. [7] Organizations, such as the United Nations, are now working hard to bind such gaps within nations. [8]

When comparing the technology gap between countries, let us take a look at Armenia and Belarus. One may think that they should have the same level of technology, as both are post-Soviet developing countries that have more or less the same GDP per capita. However, Belarus exported between $150 and $250 per capita in ICT services during 2017, while the same metric for Armenia was only $72. Just to compare, this number was more than $1000 for developed countries in the same time period. This shows that Armenia has still a long path to go. However, we cannot forget the fact that from 2009 to 2017, the countries exports of ICT services skyrocketed from $94 million to $212 million. Nonetheless, other high-tech exports (aerospace, electrical machinery, pharmaceuticals) accounted solely for $26 million in 2017. If looking at GDP components, Armenian ICT exports counted for 11 percent of total service exports and just 4.8 percent of goods and services exports in 2017. The above-mentioned comparison, highlights two important facts: first, two countries that can have similar histories or income per capita may still differ in their technological advancement and second, even when the country's technological advancement progresses quickly, it still needs to strive for improvement, as the world goes into new era of industrialization. [9]

Between companies

Unlike between countries, technological changes between firms are specific. It is can be measured by the ability of the firm to produce and innovate. [3] Companies, such as pwc, offer surveys and solutions to help alleviate the gap between business and technology, [10] which will also lead to enhanced communication and creativity of the whole business, and making the enterprise more competitive in the market.

The 5G is an example demonstrating impact of technology gap on and between businesses. In accordance with the theory, the vice president and global innovation officer at Cisco said that "There is not any one country, one company or one continent that’s going to own 5G...I just don’t want the focus to be all about 5G and who gets to the finish line, the sprint first, because there’s a much longer race after that.” [11]

Let us take the example of Armenia once again. There is a high technological gap between several Armenian banks. For example, while Central Bank of Armenia has advanced ints settlement and clearing processes by introducing quality automation services, some banks still process the majority of their payments by hand. This technology gap is actually detrimental for the banks using traditional recording method, as because of this high costs are incurred, which have direct effect on bank reliability, profitability and solvency. To sum up this example, it is very important that the automation processes must be implemented in the inter-bank level, as they will first of all provide better customer experience and service by reducing errors and waiting time and secondly all companies in the industry need to be normalized and standardized in the same way. Thus, this example shows that technological gap can exist between companies in the same industry and they can present serious issues that, in some cases, can be fatal for the companies. [12]

Limitations

See also

Related Research Articles

<span class="mw-page-title-main">Macroeconomics</span> Study of an economy as a whole

Macroeconomics is a branch of economics that deals with the performance, structure, behavior, and decision-making of an economy as a whole. This includes national, regional, and global economies. Macroeconomists study topics such as output/GDP and national income, unemployment, price indices and inflation, consumption, saving, investment, energy, international trade, and international finance.

<span class="mw-page-title-main">Economy of Mauritius</span>

The economy of Mauritius is a mixed developing economy based on agriculture, exports, financial services, and tourism. Since the 1980s, the government of Mauritius has sought to diversify the country's economy beyond its dependence on just agriculture, particularly sugar production.

A tariff is a tax imposed by the government of a country or by a supranational union on imports or exports of goods. Besides being a source of revenue for the government, import duties can also be a form of regulation of foreign trade and policy that taxes foreign products to encourage or safeguard domestic industry. Protective tariffs are among the most widely used instruments of protectionism, along with import quotas and export quotas and other non-tariff barriers to trade.

Free trade is a trade policy that does not restrict imports or exports. In government, free trade is predominantly advocated by political parties that hold economically liberal positions, while economic nationalist and left-wing political parties generally support protectionism, the opposite of free trade.

Comparative advantage in an economic model is the advantage over others in producing a particular good. A good can be produced at a lower relative opportunity cost or autarky price, i.e. at a lower relative marginal cost prior to trade. Comparative advantage describes the economic reality of the gains from trade for individuals, firms, or nations, which arise from differences in their factor endowments or technological progress.

Import substitution industrialization (ISI) is a trade and economic policy that advocates replacing foreign imports with domestic production. It is based on the premise that a country should attempt to reduce its foreign dependency through the local production of industrialized products. The term primarily refers to 20th-century development economics policies, but it has been advocated since the 18th century by economists such as Friedrich List and Alexander Hamilton.

In economics, internationalization or internationalisation is the process of increasing involvement of enterprises in international markets, although there is no agreed definition of internationalization. Internationalization is a crucial strategy not only for companies that seek horizontal integration globally but also for countries that addresses the sustainability of its development in different manufacturing as well as service sectors especially in higher education which is a very important context that needs internationalization to bridge the gap between different cultures and countries. There are several internationalization theories which try to explain why there are international activities.

An export in international trade is a good produced in one country that is sold into another country or a service provided in one country for a national or resident of another country. The seller of such goods or the service provider is an exporter; the foreign buyers is an importer. Services that figure in international trade include financial, accounting and other professional services, tourism, education as well as intellectual property rights.

Technological change (TC) or technological development is the overall process of invention, innovation and diffusion of technology or processes. In essence, technological change covers the invention of technologies and their commercialization or release as open source via research and development, the continual improvement of technologies, and the diffusion of technologies throughout industry or society. In short, technological change is based on both better and more technology.

<span class="mw-page-title-main">Heckscher–Ohlin model</span> Economic model for international trade

The Heckscher–Ohlin model is a general equilibrium mathematical model of international trade, developed by Eli Heckscher and Bertil Ohlin at the Stockholm School of Economics. It builds on David Ricardo's theory of comparative advantage by predicting patterns of commerce and production based on the resources of a trading region. The model essentially says that countries export the products which use their relatively abundant and cheap factors of production, and import the products which use the countries' relatively scarce factors.

<span class="mw-page-title-main">International economics</span> Economics between nation states

International economics is concerned with the effects upon economic activity from international differences in productive resources and consumer preferences and the international institutions that affect them. It seeks to explain the patterns and consequences of transactions and interactions between the inhabitants of different countries, including trade, investment and transaction.

In economics, the Leontief's paradox is that a country with a higher capital per worker has a lower capital/labor ratio in exports than in imports.

International business refers to the trade of Goods and service goods, services, technology, capital and/or knowledge across national borders and at a global or transnational scale.

<span class="mw-page-title-main">Competition (economics)</span> Economic scenario

In economics, competition is a scenario where different economic firms are in contention to obtain goods that are limited by varying the elements of the marketing mix: price, product, promotion and place. In classical economic thought, competition causes commercial firms to develop new products, services and technologies, which would give consumers greater selection and better products. The greater the selection of a good is in the market, the lower prices for the products typically are, compared to what the price would be if there was no competition (monopoly) or little competition (oligopoly).

<span class="mw-page-title-main">Import</span> Good brought into a jurisdiction

An importer is the receiving country in an export from the sending country. Importation and exportation are the defining financial transactions of international trade. Import is part of the International Trade which involves buying and receiving of goods or services produced in another country. The seller of such goods and services is called an exporter, while the foreign buyer is known as an importer.

Giovanni Dosi is Professor of Economics and Director of the Institute of Economics at the Scuola Superiore Sant'Anna in Pisa. He is the Co-Director of the task forces “Industrial Policy” and “Intellectual Property” at the Initiative for Policy Dialogue at Columbia University. Dosi is Continental European Editor of Industrial and Corporate Change. Included in ISI Highly Cited Researchers.

Strategic trade theory describes the policy certain countries adopt in order to affect the outcome of strategic interactions between firms in an international oligopoly, an industry dominated by a small number of firms. The term ‘strategic’ in this context refers to the strategic interaction between firms; it does not refer to military objectives or importance of a specific industry.

<span class="mw-page-title-main">Ragnar Nurkse's balanced growth theory</span> Economic theory

The balanced growth theory is an economic theory pioneered by the economist Ragnar Nurkse (1907–1959). The theory hypothesises that the government of any underdeveloped country needs to make large investments in a number of industries simultaneously. This will enlarge the market size, increase productivity, and provide an incentive for the private sector to invest.

International trade theory is a sub-field of economics which analyzes the patterns of international trade, its origins, and its welfare implications. International trade policy has been highly controversial since the 18th century. International trade theory and economics itself have developed as means to evaluate the effects of trade policies.

Lead market is a term used in innovation theory and denotes a country or region which pioneers the successful adoption of an innovative design. It sends signalling effects to other "lag" markets, which in turn helps in triggering a process of global diffusion. Marian Beise, one of the foremost propounders of this theory as it has been understood so far, states: "Innovations that have been successful with local users in lead markets have a higher potential of becoming adopted world-wide than any other design preferred in other countries". Christoph Bartlett and Sumantra Ghoshal have described lead markets as "[…] markets that provide the stimuli for most global products and processes of a multinational company. Local innovations in such markets become useful elsewhere as the environmental characteristics that stimulated such innovations diffuse to other locations". To illustrate a lead market with some examples, Germany can be seen as a lead market for renewable energies and (premium) automobiles, while the United States would suit as a lead market for information technologies including e-commerce.

References

  1. ↑ Gandolfo, Giancarlo (1998). International Trade Theory and Policy: With 12 Tables. Springer. p. 234. ISBN   3-540-64316-8.
  2. 1 2 3 Arestis, Philip; Sawyer, Malcolm C. (1994). The Elgar Companion to Radical Political Economy. Elgar. pp.  415–419. ISBN   1-85278-460-1. OCLC   28547509.
  3. 1 2 3 "Technological Gap Model of International Trade | Economics". Economics Discussion. 15 March 2018.
  4. 1 2 3 4 Salvatore, Dominick (2019). International Economics (13th ed.). John Wiley. ISBN   978-1-119-55492-9. OCLC   1114413401.
  5. ↑ Dosi, Giovanni; Pavitt, Keith; Soete, Luc (1990). The Economics of Technical Change and International Trade . New York: New York University Press. ISBN   9780814718346. OCLC   22273291.
  6. 1 2 Kimura, Koichiro (30 October 2014), "Technology Gap", The Growth of Chinese Electronics Firms, Palgrave Macmillan, p. 55, doi:10.1057/9781137391063, ISBN   978-1-137-39106-3
  7. ↑ United Nations Conference on Trade and Development. (2003). Africa's technology gap : case studies on Kenya, Ghana, Tanzania and Uganda. United Nations. OCLC   605093710.
  8. ↑ United Nations. Department of Economic and Social Affairs, issuing body. (2018-10-15). World economic and social survey 2018 : frontier technologies for sustainable development. ISBN   978-92-1-109179-3. OCLC   1080898005.
  9. ↑ "Realizing Armenia's High-Tech Potential" (PDF). World Bank Group.
  10. ↑ The New IT Platform: Bridging the Gap Between Business and IT. PricewaterhouseCoopers. 2015.
  11. ↑ Ellyatt, Holly (Nov 18, 2019). "5G doesn't belong to just one country, Cisco's vice president says". CNBC. Retrieved Nov 23, 2019.
  12. ↑ "Information Technology Prospects in the Caucasus 1st ISN Executive Conference" (PDF). International Relations and Security Network (ISN).
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.