Tectonics of the South China Sea

Last updated

The South China Sea Basin is one of the largest marginal basins in Asia. South China Sea is located to the east of Vietnam, west of Philippines and the Luzon Strait, and north of Borneo. Tectonically, it is surrounded by the Indochina Block on the west, Philippine Sea Plate on the east, Yangtze Block to the north. A subduction boundary exists between the Philippine Sea Plate and the Asian Plate. The formation of the South China Sea Basin was closely related with the collision between the Indian Plate and Eurasian Plates. The collision thickened the continental crust and changed the elevation of the topography from the Himalayan orogenic zone to the South China Sea, especially around the Tibetan Plateau. The location of the South China Sea makes it a product of several tectonic events. All the plates around the South China Sea Basin underwent clockwise rotation, subduction and experienced an extrusion process from the early Cenozoic to the Late Miocene.

Contents

The geological history can be classified into five tectonic evolutionary stages. (1) rift system development (2) sea floor spreading, (3) subsidence of the South China Sea, (4) closure of the South China Sea Basin and (5) uplift of Taiwan.

Rift system development

In the initial stage of the development of South China Sea, a basin was developed by extension to form two passive margins. The consensus is that the extension propagated from the northeast to the southwest, although some experts argue that the southwest basin is in fact older. The rifting and multiple grabens initiated around 55 Ma, [1] based on seismic profiles across the southern China Shelf. The rifting intensified around 50 Ma due to the collision of the Indian and Eurasian plates.

Two different models on how the extension initiated have been proposed, by Wang (2009) and by Cullen (2010).

Wang's model for South China Sea rifting proposes a different area of rift development. The north and northeastern parts of the South China Sea formed their rifts earlier in the Paleocene. [2] The south and southwestern parts of the South China Sea showed a later rifting around the Eocene or later. The difference in rifting and time gap between the northeastern and southwestern regions indicate the South China Sea is not a geologically homogeneous area, and its lithosphere could be divided into two areas, southwest and northeast according to its tectonic evolution. The reasons behind these differences in its rifting stage could be various, such as impact from different plates and different distribution of plumes under the crust. The Red River Fault along the western boundary of the South China Sea was believed to influence the rifting in the south and southwestern regions. Strike-slip faults.

Cullen indicated that the South China Sea Basin's rifting could be traced back to the late Cretaceous and the extension concluded in two episodes during the Cenozoic. The first episode of extension occurred in the Early Paleocene and was widely distributed. The first rift system was located mainly in the Dangerous Ground (SE of South China Sea [3] and in the Phu Khanh Basin, offshore central Vietnam. The slab pull between Philippines and South Asia is speculated to be the main force which drove the extension of the Dangerous Grounds and other parts of the South China Sea in that initial phase. [4] The later episode of extension appeared from late Eocene to Early Miocene and propagated towards the southwest. During the second stage of extension the crust was thinned and finally experienced break-up. [1]

Sea floor spreading

Seafloor spreading can be discussed using the magnetic anomaly lineations and the distribution of two types of granite. Theoretically, seafloor spreading should follow the rift phase during basin opening. However, continental rifting and seafloor spreading overlap for around 5 m.y. during the Early Miocene. For example, when northeast area was in the seafloor spreading stage, rifting was ongoing in the southwestern part.

Reconstruction of the seafloor spreading following rifting comes from magnetic anomalies. There is no consensus on the precise time when the seafloor started to spread. Brais et al. (1993) proposed that the seafloor was spreading between 30 Ma and 16 Ma. However, new evidence which was found in the Luzon Strait area shows the spreading could be as old as 37 Ma. [5] The whole process of seafloor spreading could be divided into two parts, spreading in the Northeast and spreading in the Southwest. [6] [7]

Analysis of the petrology of several micro-blocks in the South China Sea were done by Yan. [8] Two types of granites were classified. They are tonalitic granite and monzogranite. Tonalitic granite contains higher content of Ti, Al, Fe, Mg, Ca, Na and P, less Si and K, and could be derived from melting of the mantle and lower Precambrian crust. Monzogranite, however, was found to be derived by crustal melting. Therefore, the presence of monzogranite indicates an extension of South China Sea lithosphere. Changing ratios of these two categories of granites, together with their trace and major element compositions, as well as petrology also shows the changing character of seafloor spreading history in Cenozoic.

Tectonic models of sea floor spreading

There are three main models that try to interpret how the opening and formation of the South China Sea happened over long periods of geological time. They are the collision-extrusion model, the subduction-collision model, and the hybrid model. These models were illustrated by Fyhn et al, 2009.

Collision-extrusion model

The collision-extrusion model argues that the opening of the South China Sea Basin is related to the collision of the Indian Plate and the Eurasian Plate. The Borneo and Indochina plate are still considered as a single block and attached to each other. When India collided with Eurasia, part of the continent was pushed towards the southeast. This is also called "continental escape" by some papers. This model argues that seafloor spreading was triggered by the push from the collision in the west. A strike-slip fault was formed as a result. A spreading ridge was initiated in the left lateral part of this strike-slip fault. The seafloor spreading ceased with the extrusion stopped. Because of the sea floor spreading, the Borneo block underwent rotation. Although this model explains the geometrical change of the South China Sea Basin during its tectonic evolution, it is still vague on some parts especially in relation to the rotation of Borneo. [9] This model also proposes that no subduction occurred along the north side of Borneo, which is hard to explain given the existence of thrust faults in the SE South China Sea Basin.

Subduction–collision model

The subduction model indicates that the opening of the South China Sea was caused by the slab pull from the subduction of a proto-South China Sea oceanic plate south under Borneo. The existence of the Sabah orogeny supports this subduction. [10] The subduction starts in the Paleocene and ended in the Early Miocene. [11] The disadvantage of this model is that it could not explain changes in the seafloor spreading axes during the spreading of the South China Sea Basin or the rotation of Borneo. [7]

Hybrid model

The hybrid model can be regarded as a mix of the collision-extrusion model and the subduction-collision model. Some of the elements are kept from the collision-extrusion model, such as the rotation of Borneo, however, subduction was also thought to accompany the extrusion. The subduction zone migrated towards the southeast of the South China Sea, which matches with the former convergent boundary along the northern edge of the Borneo Block. This model is used more widely than the other two.

Start of closure of South China Seas

Subsidence of the South China Sea

As rifting, seafloor-spreading and collision processed, subsidence also occurred in the South China Sea. Due to the unique location of the South China Sea during the Cenozoic, with a subduction zone on east side, the Red River shear zone on the west, and the jumping of the spreading ridge to the south, different but mostly extensional faults developed and caused subsidence forming a basin. Both rift-related subsidence and post-rift thermal subsidence are found in the South China Sea.

There was also a subsidence rate change in the South China Sea at 25 Ma and 5 Ma. [14] At 25 Ma, the spreading ridge jumped from the southwest and triggered thermal subsidence and marine transgression in the north South China Sea as thermal subsidence began. Change of rate at 5 Ma occurred with the subsidence in the eastern zone and the rate increased due to the collision of the Luzon Arc in the region of modern Taiwan. There is also renewed subsidence in the NW of the basin, in the Yinggehai Basin after 5 Ma caused by reversal of motion on the Red River Fault.

Impacts of tectonic movements on petroleum resources

The north and northwest parts of the South China Sea are surrounded with rift basins on the passive continental margins. They are the Pearl River Mouth Basin, the Qiongdongnan Basin, the Yinggehai Basin and the Phu Khanh Basin. The development of these basins is closely related to the tectonic history of the South China Sea. Gong et al. (2011), [15] based on extensive drilling results and multichannel seismic data, documented the impacts of these tectonic activities on the deposition of source, reservoir and seal rocks and on the formation of various types of trapping mechanism.

These basins show typical McKenzie-type (1978) [16] two-stage extension, characterized by a differential subsidence stage (rifting) and followed by thermal regional subsidence stage (post-rifting). [15] Each stage is capable to generate a separate petroleum system. The Pearl River Mouth Basin, for example, developed four rift basins in the Tertiary. [15]

The Qiongdongnan Basin lies to the west of Pearl River Mouth Basin, both of which share a similar tectonic tectonostratigraphy. The former's subsidence history however has been influenced by an additional tectonic element, the wrenching movements along the Red River Fault System. The basin's post-rift sequence is separated by an early Miocene unconformity from the syn-rift sequence, from which gas has been produced exclusively. [15]

Rift structure in the Yinggehai Basin, due to its thick Neogene overburden, has not yet been identified but is expected as the basin is surrounded by rift basins of similar ages. [17] Clockwise rotation of the Indochina block along the Red River Fault System has been attributed to the transtensional stresses in the basin. [18] [19] Subsidence of the basin, however, predates the initial movements along the Red River Fault System. [20] [21] This suggests that the earlier extension in the Yinggehai Basin may have responded to the same tectonic regime as that experienced by the surrounding basins. Similar to the nearby Qiongdongnan basin, a basal Miocene unconformity separating the post-rift from the syn-rift sequences in this basin. This unconformity is, however, regionally diachronous, due to wrench movements. [17] Natural gas has been found in the basin's post-rift sequence, but the hydrocarbon potential of the syn-rift sequence has yet to be proven.

Related Research Articles

<span class="mw-page-title-main">Basin and Range Province</span> Physiographic region extending through western United States and Mexico

The Basin and Range Province is a vast physiographic region covering much of the inland Western United States and northwestern Mexico. It is defined by unique basin and range topography, characterized by abrupt changes in elevation, alternating between narrow faulted mountain chains and flat arid valleys or basins. The physiography of the province is the result of tectonic extension that began around 17 million years ago in the early Miocene epoch.

<span class="mw-page-title-main">Rift</span> Geological linear zone where the lithosphere is being pulled apart

In geology, a rift is a linear zone where the lithosphere is being pulled apart and is an example of extensional tectonics.

<span class="mw-page-title-main">Wilson Cycle</span> Geophysical model of the opening and closing of rifts

The Wilson Cycle is a model that describes the opening and closing of ocean basins and the subduction and divergence of tectonic plates during the assembly and disassembly of supercontinents. A classic example of the Wilson Cycle is the opening and closing of the Atlantic Ocean. It has been suggested that Wilson cycles on Earth started about 3 Ga in the Archean Eon. The Wilson Cycle model was a key development in the theory of plate tectonics during the Plate Tectonics Revolution.

<span class="mw-page-title-main">Foreland basin</span> Structural basin that develops adjacent and parallel to a mountain belt

A foreland basin is a structural basin that develops adjacent and parallel to a mountain belt. Foreland basins form because the immense mass created by crustal thickening associated with the evolution of a mountain belt causes the lithosphere to bend, by a process known as lithospheric flexure. The width and depth of the foreland basin is determined by the flexural rigidity of the underlying lithosphere, and the characteristics of the mountain belt. The foreland basin receives sediment that is eroded off the adjacent mountain belt, filling with thick sedimentary successions that thin away from the mountain belt. Foreland basins represent an endmember basin type, the other being rift basins. Space for sediments is provided by loading and downflexure to form foreland basins, in contrast to rift basins, where accommodation space is generated by lithospheric extension.

<span class="mw-page-title-main">Basin and range topography</span> Alternating landscape of parallel mountain ranges and valleys

Basin and range topography is characterized by alternating parallel mountain ranges and valleys. It is a result of crustal extension due to mantle upwelling, gravitational collapse, crustal thickening, or relaxation of confining stresses. The extension results in the thinning and deformation of the upper crust, causing it to fracture and create a series of long parallel normal faults. This results in block faulting, where the blocks of rock between the normal faults either subside, uplift, or tilt. The movement of these blocks results in the alternating valleys and mountains. As the crust thins, it also allows heat from the mantle to more easily melt rock and form magma, resulting in increased volcanic activity.

<span class="mw-page-title-main">Afar Triple Junction</span> Place where three tectonic rifts meet in East Africa

The Afar Triple Junction is located along a divergent plate boundary dividing the Nubian, Somali, and Arabian plates. This area is considered a present-day example of continental rifting leading to seafloor spreading and producing an oceanic basin. Here, the Red Sea Rift meets the Aden Ridge and the East African Rift. The latter extends a total of 6,500 kilometers (4,000 mi) from the Afar Triangle to Mozambique.

<span class="mw-page-title-main">Geology of the North Sea</span> Description of the current geological features and the geological history that created them

The geology of the North Sea describes the geological features such as channels, trenches, and ridges today and the geological history, plate tectonics, and geological events that created them.

<span class="mw-page-title-main">Philippine Mobile Belt</span> Tectonic boundary

In the geology of the Philippines, the Philippine Mobile Belt is a complex portion of the tectonic boundary between the Eurasian Plate and the Philippine Sea Plate, comprising most of the country of the Philippines. It includes two subduction zones, the Manila Trench to the west and the Philippine Trench to the east, as well as the Philippine Fault System. Within the Belt, a number of crustal blocks or microplates which have been shorn off the adjoining major plates are undergoing massive deformation.

<span class="mw-page-title-main">Andean orogeny</span> Ongoing mountain-forming process in South America

The Andean orogeny is an ongoing process of orogeny that began in the Early Jurassic and is responsible for the rise of the Andes mountains. The orogeny is driven by a reactivation of a long-lived subduction system along the western margin of South America. On a continental scale the Cretaceous and Oligocene were periods of re-arrangements in the orogeny. The details of the orogeny vary depending on the segment and the geological period considered.

<span class="mw-page-title-main">Geology of Taiwan</span>

The island of Taiwan was formed approximately 4 to 5 million years ago at a convergent boundary between the Philippine Sea Plate and the Eurasian Plate. In a boundary running the length of the island and continuing southwards, the Eurasian Plate is sliding under the Philippine Sea Plate. In the northeast of the island, the Philippine Sea Plate slides under the Eurasian Plate. Most of the island comprises a huge fault block tilted to the west.

<span class="mw-page-title-main">Yinggehai basin</span>

The Yinggehai-Song Hong Basin is located on the northwest of the South China Sea, between Hainan island and the coast of northern Vietnam. It is a large extensional pull-part basin in extensional continental marginal setting, developed along the Red River fault zone, which located at the suture of the Indochina Plate and Yangtze Plate.

The Pearl River Mouth basin (PRMB) is an extensional sedimentary basin located in the northern part of the South China Sea. The basin covers an area of about 175,000 km2 where the Pearl River meets the South China Sea near Hong Kong.

<span class="mw-page-title-main">Adare Basin</span>

The Adare Basin is a geologic structural basin located north-east of Cape Adare of Antarctica, for which its named, and north of the western Ross Sea. The Adare Basin is an extensional rift basin located along a seafloor spreading center that forms the failed arm of the Tertiary spreading ridge separating East and West Antarctica, known as the West Antarctic Rift System and similar in structure to the East Africa Rift System. Centrally located in the Adare Basin is the Adare Trough. The extension of this rift system is recorded in a series of magnetic anomalies which run along the seafloor at the extinct, north–south trending, Adare spreading axis. The Adare spreading system continues unbroken into the Northern Basin underlying the adjacent Ross Sea continental shelf.

<span class="mw-page-title-main">North German basin</span> Passive-active rift basin in central and west Europe

The North German Basin is a passive-active rift basin located in central and west Europe, lying within the southeasternmost portions of the North Sea and the southwestern Baltic Sea and across terrestrial portions of northern Germany, Netherlands, and Poland. The North German Basin is a sub-basin of the Southern Permian Basin, that accounts for a composite of intra-continental basins composed of Permian to Cenozoic sediments, which have accumulated to thicknesses around 10–12 kilometres (6–7.5 mi). The complex evolution of the basin takes place from the Permian to the Cenozoic, and is largely influenced by multiple stages of rifting, subsidence, and salt tectonic events. The North German Basin also accounts for a significant amount of Western Europe's natural gas resources, including one of the world's largest natural gas reservoir, the Groningen gas field.

<span class="mw-page-title-main">Kutai Basin</span>

The Kutai sedimentary basin extends from the central highlands of Borneo, across the eastern coast of the island and into the Makassar Strait. With an area of 60,000 km2, and depths up to 15 km, the Kutai is the largest and deepest Tertiary age basin in Indonesia. Plate tectonic evolution in the Indonesian region of SE Asia has produced a diverse array of basins in the Cenozoic. The Kutai is an extensional basin in a general foreland setting. Its geologic evolution begins in the mid Eocene and involves phases of extension and rifting, thermal sag, and isostatic subsidence. Rapid, high volume, sedimentation related to uplift and inversion began in the Early Miocene. The different stages of Kutai basin evolution can be roughly correlated to regional and local tectonic events. It is also likely that regional climate, namely the onset of the equatorial ever wet monsoon in early Miocene, has affected the geologic evolution of Borneo and the Kutai basin through the present day. Basin fill is ongoing in the lower Kutai basin, as the modern Mahakam River delta progrades east across the continental shelf of Borneo.

<span class="mw-page-title-main">Geological history of Borneo</span>

The base of rocks that underlie Borneo, an island in Southeast Asia, was formed by the arc-continent collisions, continent–continent collisions and subduction–accretion due to convergence between the Asian, India–Australia, and Philippine Sea-Pacific plates over the last 400 million years. The active geological processes of Borneo are mild as all of the volcanoes are extinct. The geological forces shaping SE Asia today are from three plate boundaries: the collisional zone in Sulawesi southeast of Borneo, the Java-Sumatra subduction boundary and the India-Eurasia continental collision.

<span class="mw-page-title-main">Geology of Myanmar</span>

The geology of Myanmar is shaped by dramatic, ongoing tectonic processes controlled by shifting tectonic components as the Indian plate slides northwards and towards Southeast Asia. Myanmar spans across parts of three tectonic plates separated by north-trending faults. To the west, a highly oblique subduction zone separates the offshore Indian plate from the Burma microplate, which underlies most of the country. In the center-east of Myanmar, a right lateral strike slip fault extends from south to north across more than 1,000 km (620 mi). These tectonic zones are responsible for large earthquakes in the region. The India-Eurasia plate collision which initiated in the Eocene provides the last geological pieces of Myanmar, and thus Myanmar preserves a more extensive Cenozoic geological record as compared to records of the Mesozoic and Paleozoic eras. Myanmar is physiographically divided into three regions: the Indo-Burman Range, Myanmar Central Belt and the Shan Plateau; these all display an arcuate shape bulging westwards. The varying regional tectonic settings of Myanmar not only give rise to disparate regional features, but they also foster the formation of petroleum basins and a diverse mix of mineral resources.

The geology of Sicily records the collision of the Eurasian and the African plates during westward-dipping subduction of the African slab since late Oligocene. Major tectonic units are the Hyblean foreland, the Gela foredeep, the Apenninic-Maghrebian orogen, and the Calabrian Arc. The orogen represents a fold-thrust belt that folds Mesozoic carbonates, while a major volcanic unit is found in an eastern portion of the island. The collision of Africa and Eurasia is a retreating subduction system, such that the descending Africa is falling away from Eurasia, and Eurasia extends and fills the space as the African plate falls into the mantle, resulting in volcanic activity in Sicily and the formation of Tyrrhenian slab to the north.

Kapuni is an onshore natural gas-condensate field located in the Taranaki Basin, a ~100,000 km2 partially-inverted rift basin on the Taranaki Peninsula in the North Island, New Zealand. Discovered in 1959 and brought into production in 1970, Kapuni remained New Zealand's only producing gas-condensate field until the offshore Maui gas field began production in 1979.

<span class="mw-page-title-main">Subduction tectonics of the Philippines</span>

The subduction tectonics of the Philippines is the control of geology over the Philippine archipelago. The Philippine region is seismically active and has been progressively constructed by plates converging towards each other in multiple directions. The region is also known as the Philippine Mobile Belt due to its complex tectonic setting.

References

  1. 1 2 Clift, P. D.; Lin, J. (2001). "Preferential mantle lithospheric extension under the South China margin". Marine and Petroleum Geology . 18 (8): 929–945. doi:10.1016/S0264-8172(01)00037-X.
  2. ↑ Taylor, B.; Hayes, D.E. (1980). "The tectonic evolution of the South China Sea Basin". The Tectonic and Geologic Evolution of Southeast Asian Seas and Islands. pp. 89–104. doi:10.1029/GM023p0089. ISBN   978-0-87590-023-0.
  3. ↑ Thies, K.; Mansor, A.; Hamdon, M.; Bishkel, R.; Boyer, J.; Tearpock, D. (2006). "Structural and Stratigraphic Development of Extensional Basins: A Case Study Offshore Deepwater Sarawak and Northwest Sabah Malaysia" (PDF). Search and Discovery 10103.
  4. ↑ Fyhn, Michael B.W.; Boldreel, Lars O.; Nielsen, Lars H. (2009). "Geological development of the central and south Vietnamese margin: Implication for the establishment of the South China Sea, Indochinese escape tectonics and Cenozoic volcanism". Tectonophysics . 460 (3–4): 83–93. Bibcode:2009Tectp.478..184F. doi:10.1016/j.tecto.2009.08.002.
  5. ↑ Hsu, Shu-Kun; Yeh, Yi-Ching; Doo, Wen-Bin; Tsai, Ching-Hui (2004). "New Bathymetry and Magnetic Lineations Identifications in the Northernmost South China Sea and their Tectonic Implications". Marine Geophysical Researches. 25 (1–2): 29–44. Bibcode:2004MarGR..25...29H. doi:10.1007/s11001-005-0731-7. S2CID   73718843.
  6. 1 2 Wang, Pinxian; Li, Qianyu (2009). The South China Sea: Paleoceanography and Sedimentology. Springer Science & Business Media. ISBN   978-1-4020-9745-4.
  7. 1 2 3 Cullen, Andrew; Reemst, Paul; Henstra, Gijs; Gozzard, Simon; Ray, Anandaroop (2010). "Rifting of the South China Sea: New perspectives". Petroleum Geoscience. 16 (3): 273–282. doi:10.1144/1354-079309-908. S2CID   27168015.
  8. ↑ Yan, Quanshu; Shi, Xuefa; Liu, Jihua; Wang, Kunshan; Bu, Wenrui (2010). "Petrology and geochemistry of Mesozoic granitic rocks from the Nansha micro-block, the South China Sea: Constraints on the basement nature". Journal of Asian Earth Sciences. 37 (2): 130–139. Bibcode:2010JAESc..37..130Y. doi:10.1016/j.jseaes.2009.08.001.
  9. ↑ Fuller, Mike; Ali, Jason R; Moss, Steve J; Frost, Gina Marie; Richter, Bryan; Mahfi, Achmad (1999). "Paleomagnetism of Borneo". Journal of Asian Earth Sciences. 17 (1–2): 3–24. Bibcode:1999JAESc..17....3F. doi:10.1016/S0743-9547(98)00057-9. ISSN   1367-9120.
  10. ↑ Hutchison, C.S.; Bergman, S.C.; Swauger, D.; Graves, J.E. (2000). "A Miocene collisional belt in north Borneo, uplift mechanism and isotatic adjustment quantified by thermochronology". Journal of the Geological Society. 157 (4): 783–793. Bibcode:2000JGSoc.157..783H. doi:10.1144/jgs.157.4.783. S2CID   131353015.
  11. ↑ Hall, R. (1997). "Cenozoic plate reconstructions of SE Aisa". Tectonic Evolution of Southeast Asia (106): 153–184.
  12. ↑ Hall, R, Robert (2002). "Cenozoic geological and plate tectonic evolution of SE Asia and the SW Pacific: computer-based reconstructions, model and animations". Journal of Asian Earth Sciences. 20 (4): 353–431. Bibcode:2002JAESc..20..353H. doi:10.1016/S1367-9120(01)00069-4.
  13. ↑ Higg, R (1999). "Gravity anomalies, subsidence history and the tectonic evolution of the Malay and Penyu Basins (offshore Peninsula Malaysia)". Basin Research. 11 (3): 285–290. Bibcode:1999BasR...11..285H. doi:10.1046/j.1365-2117.1999.00099.x. S2CID   130723667.
  14. ↑ Gong, Z.; Li, S. (1997). "Continental Margin Basin Analysis and Hydrocarbon Accumulation of the Northern South China Sea". China Sci. Press: 510.
  15. 1 2 3 4 Z.S. Gong , L. F. Huang and P. H. Chen (2011) NEOTECTONIC CONTROLS ON PETROLEUM ACCUMULATIONS, OFFSHORE CHINA, Journal of Petroleum Geology, Vol. 34(1), pp 1- 24
  16. ↑ McKENZIE, D. P.(1978) Some remarks on the development of sedimentary basins. Earth and Planetary Science Letters, 40, 25–32.
  17. 1 2 FYHN, M.B. W., NIELSEN, L. H., BOLDREEL, L. O., THANG,L. D., BOJESEN-KOEFOED, J., PETERSEN, H. I, HUYEN, N. T., DUC, N. A., DAU, N. T., MATHIESEN, A., REID, I., HUONG, D., T., TUAN, H. A., HIEN, L. V., NYTOFT, H. T., and ABATZIS, I., 2009. Geological evolution, regional perspectives and hydrocarbon potential of the northwest Phu Khanh Basin, offshore Central Vietnam. Marine Petrol Geol., 26, 1-24
  18. ↑ CHEN, P.H., CHEN, Z.Y. and ZHANG, Q.M., 1993. Sequence stratigraphy and continental margin development of the northwestern shelf of the South China Sea. AAPG Bull., 77(5), 842-862
  19. ↑ Rangin et al., 1995; RANGIN, C., KLEIN, M., ROQUES, D., LE PICHON, X. and TRONG L.V., 1995. The Red River fault system in the Tonkin Gulf, Vietnam. Tectonophysics, 243, 209–222.
  20. ↑ GILLEY, L. D., HARRISON, T. M., LELOUP, P. H., RYERSON, F. J., LOVERA, O. M. and WANG J. H., 2003. Direct dating of left-lateral deformation along the Red River shear zone, China and Vietnam. Jour. Geophys. Res., 108(B2), 1401-1421
  21. ↑ ZHU, M.H., GRAHAM, S. and McHARGUE, T., 2009. The Red River Fault Zone in the Yinggehai Basin, South China Sea. Tectonophysics, 476(3), 397-417
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.