Temco D-16

Last updated
Temco D-16
Riley-Temco (Ryan) D-16 Twin Navion.jpg
Temco D-16A
RoleBusiness & touring aircraft
National originUnited States
Manufacturer Temco Aircraft
First flight1952
Introduction1953
Produced1953-1957
Number built110
Developed from Ryan Navion

The Temco D-16 is a 1950s twin engine civil aircraft from the United States. It was produced by conversion of a Ryan Navion to replace its single engine with two wing-mounted engines. It is commonly known as the Twin Navion, although that name is also often applied to a later similar conversion, the Camair 480.

Contents

Background

The project began in 1951 as a requirement by Charles Daubenberger for an inexpensive replacement for the corporate Ryan Navion operated by his Dauby Equipment Company, to achieve better reliability while crossing high mountain ranges. He commissioned Roger Keeney of the Acme Aircraft Company to provide a solution, that evolved into a twin engine conversion of a Navion. [1]

Design and development

Jack Riley Sr. built the first model with a team of four. [2] With encouragement from Lycoming, the 125 hp Lycoming O-290 four-cylinder engine was selected for the project. Design changes from the basic Navion structure included strengthened wing spars, that supported engine mounts and other components from Piper PA-18 Super Cub, plus new engine nacelles, a faired nose section that replaced the existing engine and cowling, and a new vertical tail and rudder based on the existing horizontal stabilizer. During testing in 1952, the aircraft was initially named the X-16 Bi-Navion. On 10 November 1952, it was granted certification by the Civil Aeronautics Administration (CAA), after which it was renamed as the D-16 Twin Navion. [1] [3]

A second aircraft was converted for Jack Riley, who specified 140 hp engines, and he purchased the production rights from Dauby. Riley Aircraft then started production of the Riley D-16 Twin Navion, that standardized the design with 150 hp Lycoming O-320 engines and other improvements. In March 1953, after 19 conversions had been carried out, Riley subcontracted production to Temco Aircraft. Temco then purchased the sole production rights, and produced a further 46 conversions under the name Temco D-16. In September 1954, the design was upgraded to include 170 hp Lycoming O-340 engines plus increased fuel capacity in wingtip tanks, officially named Temco D-16A but typically marketed as the Riley 55 for the 1955 model year. [1] [3] [4] [5] [6]

Operational history

In 1957, after 45 conversions to D-16A specification, production ceased in the face of competition from more cost-effective new-build types such as the Piper PA-23 Apache. Many of the D-16 models were upgraded to D-16A standards. In 2012, about 52 Temco D-16 and D-16A models remain on the US civil aircraft register, and at least three are preserved in museum collections. [1] [3] [4] [7]

Specifications (D-16)

Data from Simpson 2001 and FAA Spec 2A1 [3] [8]

General characteristics

Performance

See also

Related development

Aircraft of comparable role, configuration, and era

Related Research Articles

Beechcraft Twin Bonanza Twin-piston-engine utility aircraft built 1951–1961

The Beechcraft Model 50 Twin Bonanza is a small twin-engined aircraft designed by Beechcraft as an executive transport for the business market. It was developed to fill a gap in Beechcraft's product line between the single-engined Model 35 Bonanza and the larger Model 18. The Twin Bonanza is dissimilar to the Bonanza, being much larger and heavier and using more powerful engines, while in its earliest form having only half the passenger capacity of the Model 18.

Bay Super V Utility aircraft

Beginning in the late 1950s the United States aircraft company Bay Aviation produced nine twin-engine conversions of the Beechcraft Bonanza called the Super "V" Bonanza. After production was shifted to Canada in 1962, five more aircraft were built for a total production run of fourteen. The basis of the conversion was the early Model 35 Bonanza with the original small V-tail surfaces. The Super-V competed with Beechcraft's own Travel Air twin-engine Bonanza derivative.

Piper PA-20 Pacer 1950s American light aircraft

The PA-20 Pacer and PA-22 Tri-Pacer, Caribbean, and Colt are an American family of light strut-braced high-wing monoplane aircraft built by Piper Aircraft from 1949 to 1964.

Gulfstream American GA-7 Cougar American light aircraft

The Gulfstream American GA-7 Cougar is an American all-metal, 4-seat, twin-engined light aircraft. The Cougar was a twin-engine development of the Gulfstream American AA-5B Tiger and traces its lineage to the AA-1 Yankee Clipper and the Bede BD-1.

Beechcraft Duke Pressurized, twin-engined piston aircraft produced 1968–1983

The Beechcraft 60 Duke is an American-built twin-engine fixed-wing aircraft created by Beechcraft. The aircraft has retractable tricycle landing gear and a pressurized cabin. The two piston engines are turbocharged and the turbochargers also pressurize the cabin with bleed air.

Partenavia P.68 Small twin engines transport aircraft

The Partenavia P.68, now Vulcanair P68, is a light aircraft designed by Luigi Pascale and initially built by Italian Partenavia. It made its first flight on 25 May 1970, its type certification was granted on 17 November 1971 and was transferred to Vulcanair in 1998. The original six-seat high-wing monoplane is powered by twin piston engines and is used for light transport and training. The P.68 Observer is an observation aircraft variant, and it was developed in a stretched, 10/11-seat twin turboprop derivative.

Cessna 421 Pressurized twin-engine general aviation aircraft

The Cessna 421 Golden Eagle is an American six or seven seat twin-engined light transport aircraft, developed in the 1960s by Cessna as a pressurized version of the earlier Cessna 411.

Cessna 414 Pressurized twin-engine general aviation aircraft

The Cessna 414 is an American light, pressurized, twin-engine transport aircraft built by Cessna. It first flew in 1968 and an improved variant was introduced from 1978 as the 414A Chancellor.

Ryan Navion American light aircraft design

The RyanNavion is a single-engine, unpressurized, retractable gear, four-seat aircraft originally designed and built by North American Aviation in the 1940s. It was later built by Ryan Aeronautical Company and the Tubular Steel Corporation (TUSCO). The Navion was envisioned as an aircraft that would perfectly match the expected postwar boom in civilian aviation, since it was designed along the general lines of, and by the same company which produced the North American P-51 Mustang.

Piper J-5

The Piper J-5 Cub Cruiser was a larger, more powerful version of the basic Piper J-3 Cub. It was designed just two years after the J-3 Cub, and differed by having a wider fuselage with the pilot sitting in the front seat and two passengers sitting in the rear seat. Equipped with a 75-hp Continental engine the plane's cruising speed was 75 mph. Though officially a three-seater, it would be more accurately described as a "two-and-a-half-seater", as two adults would find themselves quite cramped in the wider rear seat. The Cruiser sold for $1,798 when it was first designed.

Cessna 340 Twin piston engine pressurized general aviation airplane

The Cessna 340 is a twin piston engine pressurized business aircraft that was manufactured by Cessna.

Aeronca K

The Aeronca Model K Scout is an American light airplane first marketed in 1937, and was the true successor to the popular C-2/C-3 line.

The Boisavia B.260 Anjou was a four-seat twin-engine light aircraft developed in France in the 1950s. It was a low-wing cantilever monoplane of conventional configuration with retractable tricycle undercarriage. Intended by Boisavia as a touring aircraft, it did not find a market and only the single prototype was constructed. At this point, the firm sold the design to SIPA, which modified the design and re-engined it with Lycoming O-360 engines, but found that they could not sell it either. At a time when the twin-engine light plane market was already dominated by all-metal American aircraft, the Anjou's fabric-over-tube construction was something of an anachronism, and all development was soon ceased. Plans to develop a stretched version with three extra seats and Potez 4D engines were also abandoned.

CallAir Model A

The Call-Air Model A is an American two- to three-seat utility aircraft designed by the Call brothers and built by the Call Aircraft Company, later developed into a successful line of agricultural aircraft.

Camair Twin Navion

The Camair Twin Navion was a civil utility aircraft produced in the United States in the 1950s by converting single-engine Ryan Navions to twin-engine power. It had been one of two programs to improve the performance of the otherwise-pleasing Navion that was generally considered to be underpowered. The other program had resulted in the TEMCO-Riley D-16A Twin Navion. The Twin Navion design had been undertaken by the White brothers of White Engineering in San Antonio, Texas. They replaced the Navion's engine with a baggage compartment, mounted two engines within new nacelles attached to the wing leading edges, fitted the aircraft with a new tail fin made of fiberglass, and added tip tanks made from recycled WWII napalm canisters. Designated the WE-1, the prototype and the rights were sold to Camair soon after its first flight in 1953 and Civil Aviation Authority type certification was achieved in May 1955 under the name Camair 480. Sales were slow and Camair built only 25 examples before selling off the rights in 1959. The ownership of these rights would change hands twice again over the following decade but only another eight aircraft would be built after the end of Camair's involvement

Funk B

The Funk Model B was a 1930s American two-seat cabin monoplane designed by Howard and Joe Funk. Originally built by the Akron Aircraft Company later renamed Funk Aircraft Company.

Piper Aerostar

The Piper Aerostar is an American twin-engined propeller-driven executive or light transport aircraft, designed by Ted R. Smith. It was originally built by Ted Smith Aircraft Company, which after 1978 became part of the Piper Aircraft Corporation.

Schweizer SGM 2-37 US touring motor glider, 1982

The Schweizer SGM 2-37 is a two-place, side-by-side, fixed gear, low wing motor glider.

Varga 2150 Kachina

The Varga 2150 Kachina is an American all-metal, low-wing, fixed-gear, two-seat light aircraft fitted with a tricycle undercarriage.

Robin DR.200

The Robin DR.200 is a family of French conventional landing gear single-engined light touring or training cabin monoplanes. Originally produced by Centre Est Aéronautique the company later changed its name to Avions Pierre Robin.

References

Notes
  1. 1 2 3 4 twinnavion.com
  2. Gene Smith (September 1989). "The Man Who Invented the STC". Air Progress.
  3. 1 2 3 4 Simpson 2001
  4. 1 2 Simpson 1995
  5. Flight, 5 February 1954, p. 166
  6. Flight, 14 January 1955, p. 52
  7. Ogden 2007
  8. FAA Specification 2A1
Bibliography

Commons-logo.svg Media related to Temco D-16 at Wikimedia Commons