The Addams Family (pinball)

Last updated
The Addams Family
AddamsFamily pinball.jpg
Manufacturer Midway
Release dateMarch 1992
System Midway WPC (Fliptronics I)
Design Pat Lawlor, Larry DeMar
ProgrammingLarry DeMar, Mike Boon
ArtworkJohn Youssi
MechanicsJohn Krutsch
Music Chris Granner
SoundChris Granner
Voices Raul Julia (Gomez)
Anjelica Huston (Morticia)
Production run20,270

The Addams Family is a pinball machine released in March 1992. It was designed by Pat Lawlor and Larry DeMar and released by Midway (under the Bally label). It was based on the 1991 film of the same name, and features custom speech (mostly derived from the motion picture) by the stars of the film, Anjelica Huston and Raul Julia. It is the best-selling solid state pinball machine of all time with 20,270 units sold. [1]

Contents

Overview

The machine's game card describes the game objective as being to "Explore the strange world of the Addams Family". With that in mind there is no single player goal, though there are two central objectives:

Other lesser objectives include:

An electric chair is positioned above a sinkhole at the center of the playfield. At the beginning of each ball, it is lit and will award the currently flashing mansion room (rotated by the bumpers) if hit. The player must then shoot either ramp to relight the chair. The Swamp kickout hole will also award the flashing room if it is shot while the chair is lit.

Mounted beneath the central portion of the playfield is "The Power", a set of spinning magnets that can alter the path of the ball. Flashing lights in this area indicate when the Power is active.

Rules summary

Addams family pinball.jpg

Mansion

Mansion rooms are awarded by shooting the electric chair when lit, shooting the Swamp kickout hole while the chair is lit, or by reaching set threshold numbers of bear kicks. Once a mansion room is awarded, the electric chair light goes out until it is relit permanently by a shot to their ramp, or temporarily by hitting the right inlane. A player can have more than one mansion room scoring mode activated simultaneously, something which is often considered good strategy. The rooms/modes are:

Mansion rooms cannot be collected/spotted during any multiball, or after the player has locked two balls for Vault Multiball.

Once all mansion rooms have been collected, the chair immediately relights and will start the game's "wizard mode" (indicated by the flashing "?" in the uppermost room) the next time it is hit.

Vault Multiball

The player can add letters to the word "GREED" by hitting the bookcase in front of the vault. Spelling "GREED" opens the bookcase, revealing a shot into the vault that can be used to "lock" (hold) balls for multiball; for the first multiball, Thing's scoop can be used to lock the first two balls and the second one can be locked in the swamp. The Power turns on for the player's attempt to lock the third and final ball. Multiball can be started from the vault or, for the first multiball, the electric chair.

Once multiball begins, the Power remains active and the Train Wreck shot lights up for a Jackpot. The Staircase Ramp lights up for a Super Jackpot (Double on the first multiball, Triple on all others). The Jackpot starts out at 10 million, and increases by 1 million for every Bear Kicks shot or shot to a closed vault during the multiball (to a maximum of 25 million). After either jackpot is scored, the vault re-opens, and a successful shot to it re-lights only the Staircase Ramp. The player may continue to do this as long as two or more balls are in play.

If two balls drain without any jackpot being scored, the player is given 20 seconds to shoot Thing's scoop and restart multiball, but with two balls instead of three. The jackpot resumes its previous value, and another restart chance is not given if the player fails to score a jackpot before one ball drains.

Special Collectors Edition

In October 1994, Bally produced a "Special Collectors Edition", often referred to as The Addams Family Gold. Towards the end of the original production run of The Addams Family, some machines were produced with golden features to celebrate the game's sales record. The "Special Collectors Edition" similarly featured specially designed gold accents on the playfield/cabinet and an updated software program.

The game also included some play enhancements, as noted below: [2]

Only one thousand machines of the Special Collectors Edition were ever produced, each carrying the number (0001-1000) on a plaque below the coin door. A certificate with the corresponding number and the signatures of production and development team members was also unique for this edition. [3]

Hidden game codes

The Addams Family pinball contains two known Easter eggs—plus a third egg in the Special Collectors Edition—each of which can be accessed using a flipper and Start button code sequence specific to each egg. The results produced are cosmetic in nature only; they do not modify actual game play in any way.

The codes work only under the following conditions: The machine must be in its Attract or "game over" mode (no game currently in progress). There must also be no credits on the machine. The Start button cannot be flashing to begin a new game; consequently, the codes will never work if the machine is set for free play.

The codes may also temporarily stop working if they are done too many times in a row, allowing the Attract mode display screens to cycle all the way through (at least 1 or 2 minutes) before trying a code again should rectify this.

The available Easter eggs and how to activate them: [4]

  • "When Cows Fight": This is a dot-matrix still that appears on the display for about three seconds. Press the left flipper button 7 times, start once, right flipper button 14 times, start once, left button 20 times and start once.
  • "When Cows Dig for Gold" (collectors edition only): Press the left button 12 times, Start button once, right button 5 times, start once, left 4 times and start once.
  • Design credits: Press the left button 13 times, start button once, right once, start once, left 2 times and start once.

Aftermarket modifications

Some aftermarket modifications may be found in some machines:

Digital versions

A version of this table was in development for the Nintendo 64 and would be developed by Digital Eclipse and published by GT Interactive, but was cancelled. [5]

The game is also supported by Visual Pinball, [6] which can also be made by some people to play through a home made pinball cabinet, like the original but digitally emulated.

In July 2014, FarSight Studios released The Pinball Arcade Newsletter 29 indicating they "agreed upon terms with all of the major licenses and clearances" needed to digitally recreate this table. [7] [8] A Kickstarter to raise the $97,640 needed for licensing was initiated on September 12, and successfully funded $115,276 on its closing date of October 12.

Farsight Studios released their digitized version of the table in February 2015 as part of the Season Four package of The Pinball Arcade on iOS, Android, Amazon, Steam (PC & Mac) and OUYA. [9] The image of Christopher Lloyd was removed in this version due to licensing issues. [10] The "Special Collectors Gold Edition" was one of the rewards for those who pledged over $100 during the Kickstarter campaign. [11] By June 30, 2018, the table is no longer available, due to losing the license of WMS.

Zen Studios released a digitized version of the table in February 2023 as part of Pinball FX on PlayStation, Xbox and Epic Games Store.

Related Research Articles

<i>Medieval Madness</i> 1997 Williams pinball machine

Medieval Madness is a Williams pinball machine released in June 1997. Designed by Brian Eddy and programmed by Lyman Sheats, it had a production run of 4,016 units. As of April 3, 2022, the Pinside pinball community lists it as the #2 highest-ranked pinball machine ; many adherents consider it the greatest of all time.

<i>Star Trek: The Next Generation</i> (pinball) 1993 pinball machine

Star Trek: The Next Generation is a widebody pinball game, designed by Steve Ritchie and released in November 1993 by Williams Electronics. It was part of WMS' SuperPin series, and was based on the TV series. It is the only pinball machine that features three separate highscore-lists. Apart from the regular highscore-list and the buy-in-list, it also features a reminiscence to The Machine: Bride of Pin*Bot billionaires club. It is also the third pinball game overall based on the Star Trek franchise, following the 1979 pinball game by Bally, and the 1991 game by Data East, and preceding the 2013 pinball game by Stern.

<i>Twilight Zone</i> (pinball) 1993 pinball machine

Twilight Zone is a widebody pinball machine, designed by Pat Lawlor and based on the TV series of the same name. It was first released in 1993 by Midway. This game is part of WMS' SuperPin line of widebody games alongside Star Trek: The Next Generation and Indiana Jones: The Pinball Adventure.

<i>Cirqus Voltaire</i> 1997 pinball machine

Cirqus Voltaire is a 1997 pinball game, designed by John Popadiuk and released by Williams Electronics Games. The theme involves the player performing many different marvels in order to join the circus. Some of the game's distinctive features include a neon light running along the right-hand ramp, a pop bumper that rises up from the middle of the playfield at certain times, and a magnet at the top of the left ramp that can catch balls and divert them into the locks. The most notable feature is the Ringmaster, a head that rises at certain times and taunts the player.

<i>Attack from Mars</i> 1995 pinball machine

Attack from Mars is a 1995 pinball game designed by Brian Eddy, and released by Midway.

<i>The Getaway: High Speed II</i> 1992 pinball machine

The Getaway: High Speed II is a 1992 pinball game by Steve Ritchie. It is a sequel to 1986's High Speed.

<i>Indiana Jones: The Pinball Adventure</i> 1993 pinball machine

Indiana Jones: The Pinball Adventure is a 1993 widebody pinball game designed by Mark Ritchie and released by Williams. It was based on the Indiana Jones movies. It was also part of WMS' SuperPin series of widebody games.

<i>Demolition Man</i> (pinball) 1994 pinball machine

Demolition Man is a Williams pinball machine released in February 1994. It is based on the motion picture of the same name. It is part of WMS' SuperPin line of widebody games.

<i>Fish Tales</i> (pinball) 1992 pinball machine

Fish Tales is a fishing-themed pinball game released by Williams in 1992. It is one of the top 20 most produced pinball machines of all time, selling more than 13,000 units.

<i>The Flintstones</i> (pinball) A pinball game

The Flintstones is a pinball game released by Williams in 1994 and based on the movie of the same name which is based on 1960–1966 animated television series of the same name. This machine is not to be confused with another pinball machine, a redemption game, based on the TV series and also released in 1994, manufactured by Innovative Concepts in Entertainment (ICE).

<i>Apollo 13</i> (pinball) 1995 pinball machine

Apollo 13 is a 1995 pinball machine based on the film Apollo 13. It was designed by Joe Kaminkow and Joe Balcer, and released by Sega Pinball. It is notable for its 13-ball multiball mode, the largest of any pinball machine ever made.

Doctor Who is a pinball machine designed by Bill Pfutzenreuter (Pfutz) and Barry Oursler, and released by Midway in September 1992. It is based on the television series Doctor Who. As stated in the Gameplay section, the rulesheet is rather different from other pinball machines released at the time, which didn't help popularity as casual players did not understand the complex rule changes that occur during the game.

<i>No Fear: Dangerous Sports</i> 1995 pinball machine

No Fear: Dangerous Sports is a 1995 pinball game designed by Steve Ritchie and released by Williams. It is based on the clothing line. This game has an extreme sports theme and features skydiving, free climbing, water skiing, extreme skiing, supercross and car racing. This was the last game Steve Ritchie designed for Williams.

<i>Star Wars Episode I</i> (pinball) 1999 pinball machine

Star Wars Episode I is a 1999 pinball game designed by John Popadiuk and released by Williams and the second machine to use the Pinball 2000 hardware platform. It is based in the Star Wars film The Phantom Menace.

<i>Monster Bash</i> (pinball) Pinball machine

Monster Bash is a pinball machine produced by Williams. The game features some Universal Monsters including The Creature from the Black Lagoon, The Wolf Man, Frankenstein's monster, the Bride of Frankenstein, Dracula and The Mummy.

<i>Creature from the Black Lagoon</i> (pinball) 1992 pinball machine

Creature from the Black Lagoon is a pinball machine designed by John Trudeau and released by Midway. It is loosely based on the movie of the same name. The game's theme is 1950s drive-in theater. The pinball game was licensed from Universal Studios by Bally so that all backglass and cabinet artwork and creature depictions would resemble those of the original movie.

<i>Mary Shelleys Frankenstein</i> (pinball) 1995 pinball machine

Mary Shelley's Frankenstein is a 1995 pinball machine released by Sega Pinball. It is based in the film of the same name.

<i>Spider-Man</i> (pinball) 2007 pinball machine

Spider-Man is a pinball machine designed by Steve Ritchie and manufactured by Stern Pinball that was first released in June 2007. The table encompasses all three films in Sam Raimi's Spider-Man trilogy, which in turn were based on the prior comics and television series.

<i>Who Dunnit</i> Midway pinball machine

Who Dunnit is a Midway pinball machine with a 1940s style and a murder mystery theme. The playfield features up to five different murder mysteries by revealing clues by sending the ball to an elevator, phone, or slot machine. The machine accepts up to four players, and features four-ball play.

<i>Hurricane</i> (pinball) 1991 pinball machine

Hurricane is a pinball machine released by Williams Electronics in August 1991. It was designed by Barry Oursler as the third game in Oursler's amusement park themed pinball trilogy. The first being Comet, released in 1985, and the second being Cyclone, released in 1988.

References

  1. Porges, Seth (August 4, 2008). "Top 8 Most Innovative Pinball Machines of All Time". Popular Mechanics . Retrieved June 9, 2015.
  2. "Pinball Archive Rule Sheet: The Addams Family Gold Edition".
  3. "The Internet Pinball Machine Database".
  4. "Avslutad hemsida".
  5. https://gamerant.com/nintendo-64-canceled-games/
  6. "The Addams Family VP91X 2.0 - VPForums.org".
  7. The Pinball Arcade Fans forum post. The Pinball Arcade Fans. July 12, 2014. Retrieved August 5, 2014.
  8. FarSight Looking To Bring A Creepy, Kooky, Mysterious And Spooky...And Altogether Ooky Table To The Pinball Arcade!!!. The Pinball Arcade Fans. July 12, 2014. Retrieved August 5, 2014.
  9. Pinball Arcade News. February 21, 2015. Retrieved February 27, 2015.
  10. "Arnold Schwarzeneggar heads to the Pinball Arcade, Christopher Lloyd does not".
  11. "Pinball Arcade: The Addams Family by FarSight Studios — Kickstarter".