Trimphone

Last updated
A Trimphone, viewed from the side. The handset cradle functioned as a carrying handle when the receiver was off the hook, and the coiled cord in theory allowed the phone to be carried around. Trimphone.jpg
A Trimphone, viewed from the side. The handset cradle functioned as a carrying handle when the receiver was off the hook, and the coiled cord in theory allowed the phone to be carried around.

The Trimphone is a model of telephone designed in the early 1960s in the UK, the first prototypes appearing in 1965. It was positioned as a more fashionable alternative to the standard telephones available from the Post Office Telephones, the nationalised predecessor to British Telecom. The name is an acronym standing for Tone Ring Illuminator Model, referring to the then innovative electronic ringer ("warbling", as opposed to the traditional bell) and the illuminated dial. The luminous dial or betalight contained the mildly radioactive element tritium, which later caused some concern about safety. In June 1991, the United Kingdom Atomic Energy Authority at Harwell was fined £3,000 by Wantage Magistrates Court for accumulating radioactive waste, having collected several thousand Trimphone luminous dials in a skip. [1]

Contents

The Trimphone, from above, in the original dial design and the later keypad. To fit the electronics used to generate the dial pulses (and in later models, tones), the depth of the case was increased. TrimphoneDialAndKeypad.jpg
The Trimphone, from above, in the original dial design and the later keypad. To fit the electronics used to generate the dial pulses (and in later models, tones), the depth of the case was increased.

Although a later model featured buttons that did not light up instead of the original dial, it continued to be known as the Trimphone. Consumers were divided as to its aesthetic merits, and some models required rewiring in order to connect to the public phone network in the UK.[ clarification needed ]

The Telephone No. 712 usually featured an alphabetical dial, which was also used on early versions of the 722. TELE712DIAL.JPG
The Telephone No. 712 usually featured an alphabetical dial, which was also used on early versions of the 722.

The innovative design by Martyn Rowlands for Standard Telephones and Cables (STC), won a Design Centre award in 1966. [2] It originated from an initial idea in 1959 for a luxury telephone to add to the Post Office's range. Towards the end of 1963 it chose this design although it considered others including a submission from GEC. In 1964 the GPO placed a contract for 10,000 units. [3]

The Trimphone started life in 1964 as the Telephone No. 712, which was usually supplied as a 712L with an alphabetical as well as numerical dial. The Trimphone was the first in the GPO range to use a tone caller which warbled at around 2350  Hz modulated by ringing current. The volume of the ringer gradually built up over the first few cycles. There is a volume control in the base of the telephone with 'loud', 'medium' and 'soft' settings (a silent setting was achieved by slackening off a screw on the tone ringer board inside the phone).

Production of the new telephone commenced in 1965 by STC, and an initial quantity of 1000 was offered to customers on a selective trial basis in the London North West Telephone Area in the same year. It became available throughout the country in 1968, at extra rental cost, with a choice of three two-tone colour schemes: grey-white, grey-green and two-tone blue. The first example of the Trimphone was presented in May 1965 by the Postmaster General, Tony Benn, to a newlywed couple in Hampstead in a ceremony marking the ten millionth telephone to be installed in Britain. By 1980 there were 1.6 million Trimphones in use out of a total telephone population at that time of 27 million.

There was also some concern about the luminescent dial that glowed green in the dark. This effect came from a small glass tube of tritium gas, which gave off beta radiation, which in turn energized light-producing phosphors and made the dial fluoresce. Although the radioactivity was equivalent only to that given off by a wristwatch it was felt wise to withdraw this facility as public concern over radioactivity grew.

Another problem with the dial version of the Trimphone was its light weight; 0.8 kg compared with 1.4 kg for the 700-type and 2.6 kg for the 300-type telephone. This led to the complaint that on slippery surfaces the telephone turned and slid whilst dialling. The fix for this was to wet the feet and the phone stuck to the table.

After a number of different modifications, the definitive version of the Trimphone, the 2/722 was introduced in 1971. These were supplied with an all figure dial, although earlier variants of the 722 with lettered dials do exist.

The first keypad version of the Trimphone appeared in 1977 – somewhat delayed by the problem of packaging the signalling electronics into the small volume of the Trimphone. The problem was alleviated by marginally increasing the height of the case compared to the dial version. The first design of keypad Trimphone to achieve large-scale production was the SC version (Tele 766); this design incorporates relays, but does not require batteries. Subsequent designs eased the packaging problems further by eliminating the relays and introducing transistor pulsing. An MF4 (Touch-tone) design had to await the development of an integrated circuit to replace the bulky coils and capacitors otherwise needed. This was introduced in 1979 (Tele 786).

The next incarnation of the Trimphone was the Deltaphone, a deluxe version of the Trimphone with a case bound in leather.

By 1980, Trimphones had been around for some 15 years and needed revamping for the new era of competition.

The final incarnation (or rather reincarnation) was a collection of alternative colour range Trimphones called the Phoenix phone or 'Snowdon Collection'. [4] BT, as the GPO had become, fitted these with the new plug-socket connection and they were available, not to rent, but for outright purchase. [5]

Various rotary dial 722 Trimphones:

Images of various push button 766 Trimphones:

See also

Related Research Articles

<span class="mw-page-title-main">DTMF</span> Telecommunication signaling system

Dual-tone multi-frequency signaling (DTMF) is a telecommunication signaling system using the voice-frequency band over telephone lines between telephone equipment and other communications devices and switching centers. DTMF was first developed in the Bell System in the United States, and became known under the trademark Touch-Tone for use in push-button telephones supplied to telephone customers, starting in 1963. DTMF is standardized as ITU-T Recommendation Q.23. It is also known in the UK as MF4.

<span class="mw-page-title-main">Rotary dial</span> Component that allows dialing numbers

A rotary dial is a component of a telephone or a telephone switchboard that implements a signaling technology in telecommunications known as pulse dialing. It is used when initiating a telephone call to transmit the destination telephone number to a telephone exchange.

<span class="mw-page-title-main">Pulse dialing</span>

Pulse dialing is a signaling technology in telecommunications in which a direct current local loop circuit is interrupted according to a defined coding system for each signal transmitted, usually a digit. This lends the method the often used name loop disconnect dialing. In the most common variant of pulse dialing, decadic dialing, each of the ten Arabic numerals are encoded in a sequence of up to ten pulses. The most common version decodes the digits 1 through 9, as one to nine pulses, respectively, and the digit 0 as ten pulses. Historically, the most common device to produce such pulse trains is the rotary dial of the telephone, lending the technology another name, rotary dialing.

A dial tone is a telephony signal sent by a telephone exchange or private branch exchange (PBX) to a terminating device, such as a telephone, when an off-hook condition is detected. It indicates that the exchange is working and is ready to initiate a telephone call. The tone stops when the first dialed digit is recognized. If no digits are forthcoming, the partial dial procedure is invoked, often eliciting a special information tone and an intercept message, followed by the off-hook tone, requiring the caller to hang up and redial.

<span class="mw-page-title-main">Trimline telephone</span> Type of American telephones by the Bell System

The Trimline telephone is a series of telephones that was produced by Western Electric, the manufacturing unit of the Bell System. These telephones were first introduced in 1965 and are formally referred to as the No. 220 Hand Telephone Sets. The Trimline was designed by Henry Dreyfuss Associates under the project direction of Donald Genaro; the firm had produced the previous post-war desktop telephone types for the American Telephone & Telegraph Company.

<span class="mw-page-title-main">Telephone keypad</span> Keypad that appears on some telephones

A telephone keypad is a keypad installed on a push-button telephone or similar telecommunication device for dialing a telephone number. It was standardized when the dual-tone multi-frequency signaling (DTMF) system was developed in the Bell System in the United States in the 1960s that replaced rotary dialing originally developed in electromechanical switching systems. Because of the installed abundance of rotary dial equipment well into the 1990s, many telephone keypads were also designed to produce loop-disconnect pulses electronically, and some could be optionally switched to produce either DTMF or pulses.

<span class="mw-page-title-main">Ericofon</span> Telephone designed by Swedish company Ericsson

The Ericofon is a one-piece plastic telephone created by the Ericsson Company of Sweden and marketed through the second half of the 20th century. It was the first commercially marketed telephone to incorporate the dial and handset into a single unit. Because of its styling and its influence on future telephone design, the Ericofon is considered one of the most significant industrial designs of the 20th century by Phaidon. It is in the collection of the Museum of Modern Art in New York City. In Sweden, the Ericofon is known as the cobra telephone for its resemblance to a coiled snake.

<span class="mw-page-title-main">Model 500 telephone</span> Type of American telephone set

The Western Electric model 500 telephone series was the standard domestic desk telephone set issued by the Bell System in North America from 1950 through the 1984 Bell System divestiture. The successor to the model 302 telephone, the model 500's modular construction compared to previous types simplified manufacture and repair and facilitated a large number of variants with added features. Touch-tone service was introduced to residential customers in 1963 with the model 1500 telephone, which had a push-button pad for the ten digits. The model 2500 telephone, introduced in 1968, added the * (asterisk) and # (pound) keys.

<span class="mw-page-title-main">Keypad</span> Input device

A keypad is a block or pad of buttons set with an arrangement of digits, symbols, or alphabetical letters. Pads mostly containing numbers and used with computers are numeric keypads. Keypads are found on devices which require mainly numeric input such as calculators, television remotes, push-button telephones, vending machines, ATMs, point of sale terminals, combination locks, safes, and digital door locks. Many devices follow the E.161 standard for their arrangement.

<span class="mw-page-title-main">Design Line telephone</span> Line of American telephones

Design Line, also known as Deco-Tel, is a brand name that AT&T has used for several of its specialty telephone designs to fulfill the demand by customers for more variety in telephone models.

AT&T Technologies, Inc., was created by AT&T in 1983 in preparation for the breakup of the Bell System, which became effective as of January 1, 1984. It assumed the corporate charter of Western Electric Co., Inc.

<span class="mw-page-title-main">Princess telephone</span> Type of American telephones by the Bell System

The Princess telephone was introduced by the Bell System in 1959. It was a compact telephone designed for convenient use in the bedroom, and contained a light-up dial for use as a night-light. It was commonly advertised with the slogan "It's little...It's lovely...It lights", which was suggested by Robert Karl Lethin, an AT&T employee.

<span class="mw-page-title-main">1A2 Key Telephone System</span> Modular business telephone system

The 1A2 Key Telephone System is a business telephone system developed and distributed by the Western Electric Company for the Bell System.

The General Post Office (GPO) of the United Kingdom carried the sole responsibility for providing telecommunication services across the country with the exception of Hull. The GPO issued a range of telephone instruments to telephone service subscribers that were matched in function and performance to its telephone exchanges.

<span class="mw-page-title-main">Grillo telephone</span> 1960s flip phone telephone from Italy

The Grillo telephone is a 1960s flip phone telephone from Italy. It was designed by Richard Sapper and Marco Zanuso, and introduced in 1967. The "Grillo" was manufactured by Italtel, a subsidiary former state-owned telecommunications company SIP, and remained in production until 1979. It was a popular and iconic symbol of 1960s Italian design.

Speed dial is a function available on many telephone systems allowing the user to place a call by pressing a reduced number of keys. This function is particularly useful for phone users who dial certain numbers on a regular basis.

<span class="mw-page-title-main">Push-button telephone</span> Telephone which has buttons or keys for dialing

A push-button telephone is a telephone that has buttons or keys for dialing a telephone number, in contrast to a rotary dial used in earlier telephones.

<span class="mw-page-title-main">Ericsson DBH 1001 telephone</span> Line of Bakelite telephones

The Bakelite phone (bakelittelefon) officially known as Ericsson DBH 1001, and later as M33, N1020, and ED 702, was a Swedish line of telephones made from the polymer Bakelite and produced for over thirty years between 1931 and 1962.

Dialling is the action of initiating a telephone call by operating the rotary dial or the telephone keypad of a telephone.

<span class="mw-page-title-main">Contempra</span> 1967 telephone by Northern Electric

The Contempra is a telephone designed and produced by Northern Electric beginning in 1967. Contempra was the first phone designed in Canada, previous Canadian sets having been designed in the US for Western Electric and built under licence.

References

  1. ↑ "Error led to radiation leak and £3,000 fine". The Times . 6 June 1991. p. 3.
  2. ↑ "Design Centre Awards, 1966" . Retrieved 12 May 2012.
  3. ↑ "Extracts from These are minutes from the British Telephone Technical Development Committee" . Retrieved 21 April 2012.
  4. ↑ "Trimphone in two-tone green, 1982 | Science Museum Group Collection". collection.sciencemuseumgroup.org.uk. Retrieved 2022-10-16.
  5. ↑ "The Trimphone" . Retrieved 12 May 2012.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.