USCGC Tampa (1912)

Last updated

USCGC Tampa (ex Miami).jpg
USCGC Tampa (1912-1918), formerly Miami
History
Ensign of the United States Coast Guard (1915-1953).pngUnited States
Namesake City of Tampa
OperatorEnsign of the United States Coast Guard (1915-1953).png United States Coast Guard
Builder Newport News Shipbuilding and Drydock Corporation, Newport News, Virginia [1]
Cost250,000 US$ [2] [3]
Launched10 February 1912 [2]
Sponsored byMiss Bernes Richardson [3]
Commissioned19 August 1912 [2] [3]
Maiden voyage27 April 1912 [2] [3]
Stricken26 September 1918 [3]
FateSunk 26 September 1918 [3]
General characteristics [2]
Displacement1,181 tons
Length190 ft (58 m)
Beam32.5 ft (9.9 m)
Draft14.1 ft (4.3 m)
PropulsionTriple-expansion steam power plant producing 1,300 ihp (970 kW)
Speed13 knots (trial)
Complement70
Armament
  • 3 six-pounder rapid-fire guns (1912–1917)
  • 2 x 76mm naval guns (1917–1918)
  • 4 × 3"/.50 cal guns
  • 2 machine guns(1917) [2]
  • depth charges (projected & roll rack)

USCGC Tampa (ex-Miami) was a Miami-class cutter that initially served in the U.S. Revenue Cutter Service, followed by service in the U.S. Coast Guard and the U.S. Navy. Tampa was used extensively on the International Ice Patrol and also during the Gasparilla Carnival at Tampa, Florida and other regattas as a patrol vessel. [2] [3] [1] It was sunk with the highest American naval combat casualty loss in World War I. [Note 1]

Contents

U.S. Revenue Cutter Service

Miami, a cutter built for the Revenue Cutter Service by the Newport News Shipbuilding and Drydock Corporation, was authorized 21 April 1910; launched on 10 February 1912; and placed in commission by the Revenue Cutter Service at its depot at Arundel Cove, Maryland on 19 August 1912. [2] [3]

During the following five years, Miami performed duties typical for cutters. She served several times on the International Ice Patrol, operating out of New York City and Halifax, Nova Scotia, to locate icebergs which might be hazardous to navigation. Her first patrol began on 13 May 1913 out of Halifax, and her last ended on 11 June 1915 when she was relieved by USRC Seneca. [3]

On other occasions, she operated out of various stations along the eastern seaboard enforcing navigation and fishing laws. Her most frequent bases of operation during that period were Key West and Tampa, Florida; the USRC Depot at Arundel Cove, and New York City. Beginning in 1914 she participated in patrolling the Gasparilla Carnival at Tampa each year in February. [3]

U.S. Coast Guard

On 28 January 1915, the United States Revenue Cutter Service and the United States Life-Saving Service were merged to form the present-day United States Coast Guard. [Note 2] A year later, on 1 February 1916, USCGC Miami was renamed USCGC Tampa just before the start of the annual Gasparilla Pirate Festival in Tampa, Florida. [3] [6]

U.S. Navy in World War I

On 6 April 1917, when the United States entered World War I, Tampa was transferred from Coast Guard control to Navy control for the duration of hostilities, but remained crewed by Coast Guardsmen. [3] On the morning of 9 April, crew members from Tampa and Tallapoosa boarded the Austrian steamer Borneo in Hillsboro Bay near Tampa, seizing the ship and arresting the crew. Borneo was turned over to U.S. Customs authorities and the crew was left in the custody of local authorities. [7] During the next four months, she received heavier armament by trading her three six-pounders for two three-inch (76 mm), a pair of machine guns, and depth charge throwers and racks. After preparations at the Boston Navy Yard, Tampa moved to the New York Navy Yard on 16 September and reported for duty to the commanding officer of USS Paducah. [3] Ordered to duty overseas, the warship departed New York on 29 September in company with Paducah, USS Hubbard, and five French-manned, American-made submarine chasers in tow. After stops at Halifax, Nova Scotia, and Ponta Delgada in the Azores, Tampa and her sailing mates reached Gibraltar on 27 October 1917. [2] [8]

Her war service lasted just eleven months. During that time, she was assigned ocean escort duty protecting convoys from German submarines on the route between Gibraltar and the southern coast of England. Tampa spent more than half of her time at sea and on average steamed over 3,500 nautical miles (6,500 km) per month. Between 27 October 1917 and 31 July 1918, she escorted eighteen convoys between Gibraltar and Great Britain, losing only two ships out of all those escorted. [9]

During the late afternoon of 26 September 1918, Tampa parted company with convoy HG-107, which she had just escorted into the Irish Sea from Gibraltar. Ordered to put into Milford Haven, Wales, she proceeded independently toward her destination. [10] At 1930 that evening, as she transited the Bristol Channel, the warship was spotted by UB-91. According to the submarine war diary entry, the U-boat dived and maneuvered into an attack position, firing one torpedo out of the stern tube at 2015 from a range of about 550 meters (600 yd). Minutes later, the torpedo hit Tampa and exploded portside amidships, throwing up a huge, luminous column of water. [11] The cutter sank with all hands: 111 Coast Guardsmen, 4 U.S. Navy personnel, and 16 passengers consisting of 11 British Navy personnel and 5 civilians. [9] She sank in the Bristol Channel at roughly 50°40′N6°19′W / 50.667°N 6.317°W / 50.667; -6.317 . [12]

This United States Coast Guard Memorial was dedicated at Arlington National Cemetery on 23 May 1928. The northern face is inscribed with the Tampa's dead. Below is the Biblical phrase, "And Thy Path In The Great Waters." US Coast Guard Memorial - S side - Arlington National Cemetery - 2011.JPG
This United States Coast Guard Memorial was dedicated at Arlington National Cemetery on 23 May 1928. The northern face is inscribed with the Tampa's dead. Below is the Biblical phrase, "And Thy Path In The Great Waters."

Alerted by the convoy flagship, whose radio operator reported having felt the shock of an underwater explosion at about 2045, search and rescue efforts over the succeeding three days turned up only some wreckage, clearly identified as coming from Tampa, and a single unidentified body. Three bodies were later recovered, two from a beach near Lamphey, Wales, and the other at sea by a British patrol boat. Tampa was struck from the Navy list as of the date of her sinking. [2]

Legacy

The loss of Tampa is commemorated by the United States Coast Guard Memorial at Arlington National Cemetery and in the chapel at the Brookwood American Cemetery and Memorial in Surrey, England. [13] When five Eagle-class patrol craft of the Navy were transferred to the U.S. Coast Guard in late 1919, they were renamed in honor of Tampa officers. [14] Two U.S. Navy destroyers have been named in honor of her commander, Capt. Charles Satterlee. She is mentioned in the roll of honor in the second verse of "Semper Paratus," the Coast Guard's official march. On Veterans Day, 11 November 1999, the 111 crewmen of Tampa were posthumously presented with the Purple Heart by Secretary of Transportation Rodney E. Slater in ceremonies held at Arlington National Cemetery. [2] [15] [16]

Notes

Footnotes
  1. Canney claims that Tampa was the second largest naval loss of World War I. The largest loss of life was with the unexplained sinking in the Bermuda Triangle of the collier USS Cyclops in March 1918 with 236 officers and enlisted. The largest combat naval loss of life was the sinking of Tampa [4]
  2. President Woodrow Wilson signed Senate Bill 2337 on 28 January 1915 creating the United States Coast Guard through the merger of the United States Life-Saving Service with the United States Revenue Cutter Service. On that date the newly formed service had 25 sea-going cutters and 19 harbor tugs and launches and 270 stations. The bill authorized 4093 officers, warrant officers, and enlisted men. The service also consisted of one headquarters at Washington, D.C., 17 regional commands, four depots and one academy. [5]
Citations
  1. 1 2 Canney, p. 67
  2. 1 2 3 4 5 6 7 8 9 10 11 Tampa 1912, Cutters, Craft & U.S. Coast Guard-Manned Army & Navy Vessels, U.S. Coast Guard Historian's Office
  3. 1 2 3 4 5 6 7 8 9 10 11 12 13 Record of Movements, pp. 311–312
  4. Canney, p. 70
  5. King, p. 240
  6. "Register of the officers, vessels and stations of the United States Coast Guard, July 1, 1916", U.S. Government Printing Office, p. 60
  7. Larzelere, p. 38
  8. Larzelere, p. 44
  9. 1 2 Larzelere, p. 49
  10. Larzelere, p. 47
  11. Johnson, p. 55
  12. Tampa, Dictionary of American Naval Fighting Ships, U.S. Navy Naval History & Heritage Command
  13. "Brookwood American Cemetery and Memorial", American Battle Monuments Commission
  14. "Earp, 1920" (PDF). U.S. Coast Guard Historian's Office. Archived from the original (PDF) on 9 June 2013. Retrieved 19 July 2019.
  15. Moore, Angela; "Honor long overdue recalls crewmen's sacrifice during WWI", St. Petersburg Times website, 25 January 2001
  16. Larzelere, p. 46
References used

Related Research Articles

<span class="mw-page-title-main">Joseph F. Farley</span>

Joseph Francis Farley served as the ninth Commandant of the United States Coast Guard from 1946 to 1949. He was also the first Coast Guard officer to be issued a service number and held #1000 on the Coast Guard officer rolls.

<span class="mw-page-title-main">Harry G. Hamlet</span> United States Coast Guard Commandant (1874–1954)

Harry Gabriel Hamlet was the seventh Commandant of the United States Coast Guard, from 1932 to 1936.

<span class="mw-page-title-main">Frederick C. Billard</span>

Frederick Chamberlayne Billard served as the sixth Commandant of the United States Coast Guard from 1924 until his death. Billard's military career began with his appointment to the School of Instruction of the Revenue Cutter Service in 1894. Among his experiences before becoming Commandant, Billard commanded several cutters, served as aide to two Commandants and also served twice as superintendent of the Coast Guard Academy. After rising through the ranks, he was appointed to serve as Commandant in January 1924 and with the appointment, the rank of rear admiral. His leadership of the Coast Guard during the Prohibition era required careful planning and use of available resources to accomplish the mission while making sure that other required missions were not slighted. He was very involved in the training of his officers as a superintendent of the United States Coast Guard Academy and he was responsible for the purchase of the permanent location of the academy at New London, Connecticut. Because of his emphasis on training, formalized coursework for enlisted personnel and standardized testing procedures for advancement in rating occurred while he was Commandant. Billard was supportive of newly available technologies such as aircraft and radio communication in order to accomplish the mission. The Coast Guard's involvement in oceanography was instituted during his tenure. He emphasized integrity in the Coast Guard's dealings with the public and expected his officers and men to be honest in order to preserve the image of the Coast Guard. Shortly after his appointment to an unprecedented third term as Commandant, Billard died of pneumonia in May 1932.

USRC <i>Windom</i> U.S. Revenue cutter

USRC Windom was a revenue cutter of the United States Revenue Cutter Service and United States Coast Guard that served from 1896 to 1930. She was named for William Windom, the 33rd and 39th United States Secretary of the Treasury. She served during the Spanish–American War with the United States Navy. Windom was recommissioned as USCGC Comanche in 1915 and again served with the Navy as USS Comanche during World War I.

USS <i>Bancroft</i> (1892) Gunboat of the United States Navy

USS Bancroft was a United States Navy steel gunboat in commission from 1893 to 1898 and again from 1902 to 1905. She saw service during the Spanish–American War. After her U.S. Navy career, she was in commission in the United States Revenue Cutter Service from 1907 to 1915 as the revenue cutter USRC Itasca, and in the Revenue Cutter Service's successor service, the United States Coast Guard, as the cutter USCGC Itasca from 1915 to 1922. During her Coast Guard career, she saw service during World War I.

USRC <i>Hudson</i>

USRC Hudson, known for her service during the Battle of Cárdenas, was the United States Revenue Cutter Service's first vessel to have a steel hull and triple-expansion steam engine.

USCGC <i>Ossipee</i> United States Coast Guard cutter launched in 1915

USCGC Ossipee (WPR-50) was a United States Coast Guard cutter of the Tallapoosa class constructed by Newport News Shipbuilding of Newport News, Virginia, and commissioned 28 July 1915. Her hull was strengthened for light icebreaking operations. She was assigned a homeport of Portland, Maine, after commissioning and cruised as far south as Cape Ann, Massachusetts, serving in a law enforcement and search and rescue capacity. She saw service in both World War I and World War II.

USCGC <i>Tallapoosa</i> United States Coast Guard cutter

USCGC Tallapoosa (WPG-52) was a United States Coast Guard cutter of the Tallapoosa-class and was designed to replace the revenue cutter Winona. Her hull was reinforced for light icebreaking. She was initially stationed at Mobile, Alabama, with cruising grounds to Lake Pontchartrain, Louisiana, and Fowey Rocks, Florida. During World War I she escorted convoys out of Halifax, Nova Scotia. After the war she served with the Bering Sea Patrol before returning to Savannah, Georgia, before World War II. During the war Tallapoosa assisted with convoy escort duty and anti-submarine patrols.

USCGC <i>Seneca</i> (1908)

USCGC Seneca, or before 1915 USRC Seneca, was a United States Coast Guard cutter built and commissioned as a "derelict destroyer" with the specific mission of locating and then destroying abandoned shipwrecks that were still afloat and were a menace to navigation. She was designed with excellent sea-keeping qualities, a long cruising range, good towing capabilities, and by necessity the capacity to store a large amount of munitions. She was one of five Coast Guard cutters serving with the U.S. Navy in European waters during World War I.

USS <i>Calypso</i> (AG-35)

The third USS Calypso (AG-35) was launched 6 January 1932 for the United States Coast Guard as USCGC Calypso (WPC-104) by the Bath Iron Works in Bath, Maine. She was initially stationed at San Diego, California, and transferred to Baltimore, Maryland in 1938. She was transferred from the Coast Guard to the U.S. Navy on 17 May 1941 and commissioned the same day.

USRC <i>Manning</i>

USRC Manning was a revenue cutter of the United States Revenue Cutter Service that served from 1898 to 1930, and saw service in the U.S. Navy in the Spanish–American War and World War I.

USRC <i>Onondaga</i>

USRC Onondaga was an Algonquin-class cutter built for the U.S. Revenue Cutter Service for service on the Great Lakes. Because of the Spanish–American War, she was cut in half shortly before completion and transported to Ogdensburg, New York for service on the Atlantic coast although the war ended before she could be put into service. After the formation of the United States Coast Guard in 1915 she became USCGC Onondaga. She served as a patrol vessel at various Atlantic coast ports before World War I and unlike most Coast Guard cutters during World War I, she remained under the control of the Commandant of the Coast Guard. After the war she patrolled for a brief time based at New London, Connecticut before being decommissioned in 1923.

USRC <i>Mohawk</i>

USRC Mohawk, was a steel steam powered revenue cutter built for the U.S. Revenue Cutter Service by William R. Trigg Company at Richmond, Virginia. Her primary duties in the Revenue Cutter Service and Coast Guard were assisting vessels in distress and enforcing navigational laws as well as a derelict destroyer. Mohawk was sunk after a collision with another vessel in October 1917.

USRC <i>Yamacraw</i>

USRC Yamacraw, was a steel-hull flush-deck cutter that served in the United States Revenue Cutter Service from 1909 to 1937 and was the sister ship to the USRC Tahoma.

USRC <i>Pamlico</i>

USRC Pamlico was a revenue cutter of the United States Revenue Cutter Service that served from 1907 to 1946 designed specifically to cruise inland waters and did so while stationed at New Bern, North Carolina her entire career.

USRC <i>Snohomish</i>

The USRC Snohomish was a 152 ft (46 m) seagoing tug built at the specific direction of Congress by Pusey & Jones, Wilmington, Delaware for service on the Pacific Northwest coast. She was fitted with latest lifesaving and property saving equipment available at the time of her construction and originally cost $189,000. She was commissioned by the United States Revenue Cutter Service on 15 November 1908 and arrived at her homeport of Neah Bay, Washington by way of passage around Cape Horn in 1909.

USCGC <i>Crawford</i>

USCGC Crawford (WSC-134), was a 125 ft (38 m) United States Coast Guard Active-class patrol boat in commission from 1927 to 1947. She was named for William H. Crawford, (1772–1834) who was appointed in 1816 as Secretary of the Treasury by President James Madison and he continued under President James Monroe through 1825. Crawford was the seventh vessel commissioned by the U.S. Revenue Cutter Service and the Coast Guard named after the former secretary. She served during the Rum Patrol and World War II performing defense, law enforcement, ice patrol, and search and rescue missions.

USCGC <i>Unalga</i>

USCGC Unalga (WPG-53) was a Miami-class cutter that served in the United States Revenue Cutter Service and later the U.S. Coast Guard and U.S. Navy. The early part of her career was spent patrolling the Pacific coast of the United States and the Bering Sea. After 1931 she did patrol work off Florida and in the Caribbean. After Unalga was sold in 1946, she was renamed after Jewish Agency leader Haim Arlosoroff and used for six months for moving Jewish refugees from Europe to Palestine before being forced to run aground by British Navy ships near Haifa.

USRC <i>Algonquin</i>

USRC Algonquin was an Algonquin-class cutter built for the U.S. Revenue Cutter Service for service on the Great Lakes. Because of the Spanish–American War, she was cut in half shortly before completion and transported to Ogdensburg, New York for service on the Atlantic coast although the war ended before she could be put into service. She was homeported at San Juan, Puerto Rico from 1905 to 1917. Algonquin served briefly for the U.S. Navy along the Atlantic Coast in the summer of 1898 before being returned to the Treasury Department. After the formation of the United States Coast Guard in 1915 the vessel became USCGC Algonquin. The ship served as a patrol vessel at Norfolk, Virginia at the beginning of World War I before being assigned convoy duty in the Mediterranean. In February 1919 Algonquin was transferred to the West Coast and served in the Pacific Northwest and Alaska until being decommissioned at San Francisco in December 1930.