History | |
---|---|
U.S. Revenue-Marine | |
Name | USRC Wolcott |
Namesake | Oliver Wolcott Jr. (1760–1833), second United States Secretary of the Treasury (1795–1800) |
Builder | Risdon Iron Works, San Francisco, California |
Acquired | 3 July 1873 |
Commissioned | 30 July 1873 |
Homeport | Port Townsend, Washington |
Notes | U.S. Revenue-Marine became U.S. Revenue Cutter Service 1894 |
U.S. Revenue Cutter Service | |
Name | USRC Wolcott |
Namesake | Oliver Wolcott Jr. (1760–1833), second United States Secretary of the Treasury (1795–1800) |
Homeport | Port Townsend, Washington |
Fate | Sold 19 February 1897 |
United States | |
Name | Wolcott |
Namesake | Previous name retained |
Homeport | San Francisco, California |
Fate | Wrecked 31 January 1900 |
General characteristics as revenue cutter | |
Type | Revenue cutter |
Displacement | 235 tons |
Length | 155 ft (47.2 m) |
Beam | 22 ft (6.7 m) |
Draft | 9 ft 7 in (2.9 m) |
Propulsion | Vertical-cylinder, surface-condensing steam engine |
Sail plan | Schooner-rigged |
Complement | 39 (8 officers, 31 enlisted) |
Armament | 2 x guns |
General characteristics as commercial vessel | |
Type | Steam schooner |
Tonnage | |
Length | 131.5 ft (40.1 m) |
Beam | 22.5 ft (6.9 m) |
Depth | 14.3 ft (4.4 m) |
Propulsion | Vertical-cylinder, surface-condensing steam engine |
Sail plan | Schooner-rigged |
USRC Wolcott, the second ship of the name, sometimes referred to as USRC Oliver Wolcott, [1] was a revenue cutter in commission in the United States Revenue-Marine from 1873 to 1894 and in the United States Revenue Cutter Service from 1894 to 1897. She served in the waters of the Territory of Alaska during her career. After her revenue cutter service, she operated as a merchant vessel until she was wrecked in 1900.
Wolcott was built by Risden Iron Works at San Francisco, California. [1] She was constructed of white oak and yellow fir brought to San Francisco from Oregon and Washington, [1] and was schooner-rigged with iron-wire standing rigging. [1] She had a vertical-cylinder, surface-condensing steam engine. [1] Revenue Captain White accepted her for service on behalf of the U.S. Revenue-Marine on 3 July 1873, [1] and she entered service on 30 July 1873 when the crew of the revenue cutter USRC Wayanda, which she replaced, cross-decked from Wayanda to her. [1]
Home-ported at Port Townsend, Washington, [1] Wolcott was assigned to the Bering Sea Patrol [1] and spent most of her career operating in the waters of the Territory of Alaska. Her crew deserted in 1882, apparently because of low wages, her commanding officer, Revenue Captain L. N. Stodder having orders not to allow wages for her crew to exceed $40 per month. [1] Re-manned, she arrived at the request of authorities in British Columbia, Canada, at Port Simpson, British Columbia, in 1883 to guard against a feared uprising by Native Americans there. [1]
The U.S. Revenue-Marine was renamed the U.S. Revenue Cutter Service in 1894. Late in Wolcott's career, she rescued the survivors of the schooner Elwood at Killisnoo in Southeast Alaska. [2] Elwood had been wrecked on a reef off Gardner Point ( 57°01′N134°37′W / 57.017°N 134.617°W ) on 14 December 1895 with the loss of one life, [2] and her survivors made a journey via Murder Cove on the southernmost coast of Admiralty Island in the Alexander Archipelago in order to reach Killisnoo. [2] Wolcott transported them to Sitka. [2]
Wolcott was sold to Joshua Green of Seattle, Washington, for $3,050 on 19 February 1897. [1]
After her sale, Wolcott retained her name and entered service as a merchant vessel. [3] As of 1899 her home port was San Francisco. [3]
Wolcott's last voyage ended in Alaskan waters. On 29 January 1900, she departed Unga on Unga Island in the Aleutian Islands bound for Sitka with seven passengers, a crew of 17, and 50 pounds (22.7 kg) of gold bullion valued at $13,357.26 aboard. [4] On 31 January, she struck a submerged reef – thereafter known as Wolcott Reef ( 57°40′15″N154°11′45″W / 57.67083°N 154.19583°W ) – and was beached at Rocky Point ( 57°39′44″N154°13′56″W / 57.6622222°N 154.2322222°W ) on Kodiak Island, 7 nautical miles (13 km; 8.1 mi) west-southwest of Uyak Bay ( 57°48′00″N154°04′00″W / 57.8000°N 154.0667°W ), to prevent her from sinking. [4] All on board reached safety and the gold bullion was salvaged, but Wolcott became a total loss. [4] Valued at $15,000 at the time of her loss, she was insured for $12,500. [4]
The United States Revenue Cutter Service was established by an act of Congress on 4 August 1790 as the Revenue-Marine upon the recommendation of Secretary of the Treasury Alexander Hamilton to serve as an armed customs enforcement service. As time passed, the service gradually gained missions either voluntarily or by legislation, including those of a military nature. It was generally referred to as the Revenue-Marine until 31 July 1894, when it was officially renamed the Revenue Cutter Service. The Revenue Cutter Service operated under the authority of the U.S. Department of the Treasury. On 28 January 1915, the service was merged by an act of Congress with the United States Life-Saving Service to form the United States Coast Guard.
The Farallon Steamship Disaster was the wreck of a wooden Alaska Steamship Company passenger liner, SS Farallon, that hit Black Reef in Cook Inlet in the Territory of Alaska on 5 January 1910. All on board evacuated to a nearby island, where most had to survive for a month in a mid-winter climate before they were rescued. Six other survivors survived an attempt to row across Shelikof Strait in search of rescue for the stranded men.
USCGC Confidence (WMEC-619) is a United States Coast Guard medium endurance cutter.
USS McCulloch, previously USRC McCulloch and USCGC McCulloch, was a ship that served as a United States Revenue Cutter Service cutter from 1897 to 1915, as a United States Coast Guard Cutter from 1915 to 1917, and as a United States Navy patrol vessel in 1917. She saw combat during the Spanish–American War during the Battle of Manila Bay and patrolled off the United States West Coast during World War I. In peacetime, she saw extensive service in the waters off the U.S. West Coast. She sank in 1917 after colliding with another steamer.
USCGC Cape Henlopen was a 95-foot (29 m) type "C" Cape-class cutter constructed at the Coast Guard Yard at Curtis Bay, Maryland in 1958 for use as a law enforcement and search and rescue patrol boat.
The first USS Thetis was a three-masted, wooden-hulled steam whaler in the United States Navy used to rescue a polar expedition and later in the Revenue Cutter Service.
USRC Mohawk, was a steel steam powered revenue cutter built for the U.S. Revenue Cutter Service by William R. Trigg Company at Richmond, Virginia. Her primary duties in the Revenue Cutter Service and Coast Guard were assisting vessels in distress and enforcing navigational laws as well as a derelict destroyer. Mohawk was sunk after a collision with another vessel in October 1917.
USS Surveyor was an armed steamer that served in the United States Navy from 1917 to 1919. Prior to her U.S. Navy service, she operated as the survey ship USC&GS Surveyor for the United States Coast and Geodetic Survey in 1917, and she returned to that role after her U.S. Navy decommissioning, remaining in Coast and Geodetic Survey service until 1956.
USC&GS Yukon was a schooner that served as a survey ship from 1878 to 1894 in the United States Coast Survey, which was renamed the United States Coast and Geodetic Survey in 1878. She was the pioneering Coast Survey or Coast and Geodetic Survey ship in many of the waters of the Territory of Alaska, including the Bering Sea and the western Aleutian Islands, and she also operated extensively in California and Washington. She later entered commercial service as Elwood and was wrecked in 1895.
USCGC Citrus (WAGL-300/WLB-300/WMEC-300) was a Cactus (A)-class seagoing buoy tender built in 1942 in Duluth, Minnesota, and now operated by the navy of the Dominican Republic.
The Thomas Corwin was a revenue cutter of the United States Revenue-Marine and United States Revenue Cutter Service and subsequently a merchant vessel. These two very different roles both centered on Alaska and the Bering Sea. In 1912, Frank Willard Kimball wrote: "The Corwin has probably had a more varied and interesting career than any other vessel which plies the Alaskan waters."
USRC Tahoma, was a steel-hull flush deck cutter that served in the United States Revenue Cutter Service from 1909 to 1914 with the Bering Sea Patrol and was the sister ship to the USRC Yamacraw.
USRC Wayanda[a] was a Pawtuxet-class screw steam revenue cutter built for the United States Revenue Cutter Service during the American Civil War.
SS Aleutian was a passenger ship in North American coastal service. Built in 1899 for the Ward Line as SS Havana, she would later serve the building of the Panama Canal as SS Panama and ultimately enter Alaskan service as SS Aleutian.
USCGC Liberty (WPB-1334) is an Island-class cutter of the United States Coast Guard. She spent her first 33 years of service homeported in Juneau, Alaska where she patrolled territorial waters, including the Inside Passage. In 2016 she won the Hopley Yeaton Cutter Excellence Award for outstanding operational and humanitarian achievements. In 2022 she was reassigned to Valdez, Alaska.
USCGC Unalga (WPG-53) was a Miami-class cutter that served in the United States Revenue Cutter Service and later the U.S. Coast Guard and U.S. Navy. The early part of her career was spent patrolling the Pacific coast of the United States and the Bering Sea. After 1931 she did patrol work off Florida and in the Caribbean. After Unalga was sold in 1946, she was renamed after Jewish Agency leader Haim Arlosoroff and used for six months for moving Jewish refugees from Europe to Palestine before being forced to run aground by British Navy ships near Haifa.
Ancon was an ocean-going wooden sidewheel steamship built in San Francisco in 1867. She carried both passengers and freight. In her early career she was a ferry in Panama and then ran between Panama and San Francisco. Later she began coastal runs between San Diego and San Francisco. Her last route was Port Townsend, Washington to Alaska. Today she is more notable for her disasters than her routine voyages. Ancon Rock in Icy Strait, Alaska is the site of her 1886 grounding. Her final wreck, in 1889 in Naha Bay, near Loring, Alaska was commemorated by Albert Bierstadt. His painting, "Wreck of the 'Ancon' in Loring Bay, Alaska" now hangs in the Museum of Fine Art in Boston.
USFS Osprey was an American steamer that served as a fishery patrol vessel in the waters of the Territory of Alaska. She was in commission in the United States Bureau of Fisheries (BOF) from 1913 to 1921, and was the first vessel the BOF ever operated on fishery patrols in Alaska. Before the BOF purchased her, she was the commercial cannery tender Wigwam from 1895 to 1912. After her BOF career ended, she operated as a commercial motor tug with the name Foss No. 19 from 1922 to 1965 and with the name Kiowa from 1965 until she sank in 1978.
John A. Henriques was a United States Revenue Cutter Service officer that was noted for helping form the establishment of the Revenue Cutter Service School of Instruction, which later became the United States Coast Guard Academy.
USRC Lincoln was a revenue cutter commissioned by the U.S. Revenue–Marine and named in honor of the 16th United States president, Abraham Lincoln.