USS General Taylor

Last updated

History
US flag 26 stars.svg
NameUSS General Taylor
NamesakeU.S. General Zachary Taylor
Completed1840?
Acquired
  • By War Dept.: 1840
  • By Navy: 1842
Commissioned18421852
RefitRebuilt and re-engined, 1846
FateSold 1852
General characteristics
Type Tugboat/Despatch vessel
Tonnage150 tons
Length105 ft (32 m)
Beam17 ft 6 in (5.33 m)
Draft6 ft 6 in (1.98 m)
Depth of hold8 ft 6 in (2.59 m)
Propulsion
Speed89 knots; after refit, 89.5 knots
Armament1849: 1 × 6-pdr cannon

USS General Taylor was a small sidewheel steamer which served in the U.S. Navy from 1842 to 1852. Prior to her Navy service, she operated as a transport and supply vessel during the Second Seminole War.

Contents

Though only an auxiliary ship, General Taylor appears to have had quite a colorful career. After her Seminole War service, she played a cameo role in the notorious trial and sentencing of abolitionist Jonathan Walker. In the mid-1840s, General Taylor's crew included two future Engineers-in-Chief of the Navy. After being burned and rebuilt in 1846, the steamer later played a role in the foiling of a planned 1849 filibuster invasion of Cuba. General Taylor was sold by the Navy in 1852.

Design and construction

General Taylor had a length of 105 feet (32 m), a beam of 17 feet 6 inches (5.33 m), a draft of 6 feet 6 inches (1.98 m) and a hold depth of 8 feet 6 inches (2.59 m). [1]

General Taylor's original builder is not known, but her original engine was supplied by the Allaire Iron Works of New York. [2] The single-cylinder, 98 hp, 23 rpm engine was of the square crosshead type, with a 25.3 inch bore and 6-foot stroke. Steam was supplied by an iron flue boiler at an average working pressure of 20 psi. The paddlewheels were 16 feet in diameter and 4 feet 10 inches wide, with fourteen 1-foot 10-inch width paddles. The vessel had an average speed of 8 and a maximum speed of 9 knots. [3]

Service history

General Taylor was purchased at New York by the War Department in 1840 and was used as a transport and supply ship during the Second Seminole War in Florida. She was transferred to the Navy in 1842, and used for a time in the Gulf of Mexico. [1]

In July 1844, General Taylor was used to convey abolitionist Jonathan Walker from Key West to the Pensacola Navy Yard, where he was handed over to local authorities and charged with slave stealing. Walker later testified that for most of the voyage aboard General Taylor, in spite of being seriously ill, he was kept chained hand and foot in "filthy" [4] and oppressively hot conditions in or near the engine room of the steamer's hold, [5] apart from brief periods of a few hours a day when he was allowed on deck. [4] Walker was later infamously sentenced by a Florida civil court to having the letters "S.S."an acronym for "Slave Stealer" [6] branded on his hand. [7]

In 1845, General Taylor was converted into a tugboat, operating out of the Pensacola Navy Yard. [1] Benjamin F. Isherwood, later Engineer-in-Chief of the Navy during the American Civil War, served on General Taylor in 184647. [8] William H. Shock, Engineer-in-Chief of the Navy in the 1870s, also served on General Taylor in the late 1840s. [9]

On 10 October 1846, General Taylor caught fire while lying at the wharf of the Pensacola Navy Yard, and was burned to the water's edge. [1] [10] She was redesigned by F. Grice and rebuilt by G. Lyndal of Baltimore, a new engine and boiler being supplied at the same time by Charles Reeder & Sons of the same city. [2] The new 187 hp engine was of the crosshead type, with a 36-inch bore, 6-foot stroke and steam cut-off of 3 feet. The new boiler had a greater fire surface area (720 vs. 499 square feet) than the original, and a slightly higher operating pressure of 25 psi. The paddlewheel diameter was also enlarged by a foot, and the number of paddles reduced by one to thirteen. The new machinery appears to have been less efficient than the original, consuming twice the fuel for only a one-half knot increase in maximum speed. [3] General Taylor's hull dimensions remained the same after the rebuild as before. [1]

In September 1849, General Taylor was despatched to Round Island, Mississippi, to help monitor a party of 500 or more "adventurers" gathered there, whose leaders were rumored to be planning an attack on Cuba. General Taylor was selected for the mission because her light draft was expected to enable her to negotiate the shallow approaches to the Island, while her speed would allow her to effectively pursue any ships attempting to embark the adventurers. [11]

For the operation, General Taylor was equipped with a single 6-pounder cannon, and her crew issued with small arms. In the event, these precautions proved unnecessary as the men on the island eventually dispersed peacefully. The men had been in the pay of Narciso López, a Venezuelan filibuster. [11] Lopez would later organize two further attempts to invade Cuba; on the last attempt he was captured and executed by the Spanish.[ citation needed ]

General Taylor was employed as a dispatch vessel at the Navy Yard until April 1852, when, needing extensive repairs, she was sold at public auction at Pensacola for $3,000. [1] [2] Her fate thereafter is unknown.[ citation needed ]

Related Research Articles

<span class="mw-page-title-main">Steamship</span> Type of steam-powered vessel

A steamship, often referred to as a steamer, is a type of steam-powered vessel, typically ocean-faring and seaworthy, that is propelled by one or more steam engines that typically move (turn) propellers or paddlewheels. The first steamships came into practical usage during the early 1800s; however, there were exceptions that came before. Steamships usually use the prefix designations of "PS" for paddle steamer or "SS" for screw steamer. As paddle steamers became less common, "SS" is assumed by many to stand for "steamship". Ships powered by internal combustion engines use a prefix such as "MV" for motor vessel, so it is not correct to use "SS" for most modern vessels.

SS <i>Savannah</i> Hybrid sailing/steampowered ship built in 1818; first steamship to cross the Atlantic

SS Savannah was an American hybrid sailing ship/sidewheel steamer built in 1818. She was the first steamship to cross the Atlantic Ocean, transiting mainly under sail power from May to June 1819. In spite of this historic voyage, the great space taken up by her large engine and its fuel at the expense of cargo, and the public's anxiety over embracing her revolutionary steam power, kept Savannah from being a commercial success as a steamship. Originally laid down as a sailing packet, she was, following a severe and unrelated reversal of the financial fortunes of her owners, converted back into a sailing ship shortly after returning from Europe.

USS <i>Fort Jackson</i>

USS Fort Jackson was a wooden sidewheel steamer in the United States Navy during the American Civil War. She was successful in enforcing the Union blockade of Confederate ports, capturing five ships carrying contraband. She participated in the battles for Fort Fisher, which effectively closed the port of Wilmington, North Carolina to the Confederacy. Most notably, the surrender of Confederate forces in Texas was signed aboard the ship, formally ending the Civil War in that portion of the country.

USS <i>Santiago de Cuba</i> Gunboat of the United States Navy

USS Santiago de Cuba was a side-wheel steamship acquired by the Union Navy during the first year of the American Civil War. She was outfitted as a gunboat with powerful 20-pounder rifled guns and 32-pounder cannon and was assigned to the Union blockade of the Confederate States of America. She was notably successful in this role, capturing several blockade runners. Her last major action of the war was the assault on Fort Fisher, during which seven of her crew won the Medal of Honor.

<span class="mw-page-title-main">Stephen Decatur Trenchard</span> United States Navy admiral (1818–1883)

Stephen Decatur Trenchard was a rear admiral in the United States Navy. He was present at the Battle of Taku Forts in 1859, and commanded the supply ship and gunboat Rhode Island throughout the American Civil War, seeing action at both Battles of Fort Fisher. He later commanded the North Atlantic Squadron.

<i>Sankaty</i>

Sankaty was a propeller-driven steamer that served as a ferry to Martha's Vineyard and Nantucket in Massachusetts; in Rockland, Maine; Stamford, Connecticut and Oyster Bay, Long Island in the United States from 1911 to 1940. During World War II, the ship was requisitioned by the Royal Canadian Navy for service as a minelayer and maintenance vessel along the Canadian Atlantic coast. Following the war the ship returned to a ferry, working the Wood Islands, Prince Edward Island and Caribou, Nova Scotia route in Canada from 1947 until 1964. While being towed to the breaker's yard, the ship sank off the coast of Nova Scotia on October 27, 1964.

USS <i>Underwriter</i> (1852) Steamer gunboat (in service 1861–1864)

USS Underwriter was a 341-ton sidewheel steamer that was purchased for military use by the Union Navy during the American Civil War.

USS <i>De Soto</i> (1859) U.S. gunboat

USS De Soto was a fast wooden-hulled sidewheel steamship that saw service as a U.S. Navy gunboat during the American Civil War.

<span class="mw-page-title-main">Marine steam engine</span> Steam engine that is used to power a ship or boat

A marine steam engine is a steam engine that is used to power a ship or boat. This article deals mainly with marine steam engines of the reciprocating type, which were in use from the inception of the steamboat in the early 19th century to their last years of large-scale manufacture during World War II. Reciprocating steam engines were progressively replaced in marine applications during the 20th century by steam turbines and marine diesel engines.

The Allaire Iron Works was a leading 19th-century American marine engineering company based in New York City. Founded in 1816 by engineer and philanthropist James P. Allaire, the Allaire Works was one of the world's first companies dedicated to the construction of marine steam engines, supplying the engines for more than 50% of all the early steamships built in the United States.

<i>Henry Eckford</i> (steamboat)

Henry Eckford was a small passenger-cargo steamboat built in New York in 1824. She was the first steam vessel in the world to be installed with a compound engine, almost fifty years before the technology would become widely adopted for marine use.

SS <i>Archimedes</i> First steamship driven by screw propeller

SS Archimedes was a steamship built in Britain in 1839. She was the world's first steamship to be driven successfully by a screw propeller.

<i>Comboyne</i> (1911)

The Comboyne was a wooden screw steamer built in 1911 at Tuncurry, that was wrecked when it struck an object whilst carrying timber to Wollongong and was lost at approximately 1 mile (1.6 km) off Bass Point, Shellharbour, New South Wales on 27 November 1920.

PS Lily was a passenger paddle steamer operated by the London and North Western Railway from 1880 to 1900.

PS <i>Violet</i> (1880)

SS Violet was a passenger paddle steamer operated by the London and North Western Railway from 1880 to 1902.

<span class="mw-page-title-main">Franklin J. Drake</span> United States Navy admiral (1846–1929)

Franklin Jeremiah Drake was a Rear Admiral in the United States Navy. He fought in the American Civil War and the United States expedition to Korea.

<span class="mw-page-title-main">George H. Cooper</span>

Rear Admiral George Henry Cooper was an officer in the United States Navy. During his long naval career, he served on the African Slave Trade Patrol, and fought in the Second Seminole War, the Mexican War, the American Civil War, and the Korean Expedition, and rose to command of the North Atlantic Squadron.

PS <i>Herald</i>

The Herald was an iron paddle steamer imported as frames from the United Kingdom and assembled in 1855 by Richard Johnson in Sydney Harbour, New South Wales, Australia, where she was registered. The Herald is one of the earliest iron paddle wheel steamers built in Australia, where she operated within Sydney Harbour. She was initially used on the fledgling North Shore route between Dawes Point and Blues Point by the newly formed North Shore Steam Company; however, due to not enough traffic to make her financially viable, she often performed tug duties. Eventually the North Shore Steam Company was wound up; the vessel was put up for sale but continued picking up business wherever it was available, operating as a tug, ferry, excursion boat and cargo vessel.

<i>Conflict</i>-class sloop

This group of vessels were originally slated to be built to the Sampson designed steam vessel; however, the Admiralty on 9 May 1845, ordered the first pair as First-Class screw sloops to be built from a design of Sir William Symonds, Surveyor of the Navy. This design would become known as the Conflict-class sloop. These would be 10-gun vessels with 400 NHP engines. The second pair of vessels were ordered on 26 March 1846 but after their keels were laid at Pembroke Dockyard, their construction was suspended in September 1846 then cancelled five years later, on 4 April 1851. Both completed ships served in the Baltic during the Crimean war, and Desperate briefly served as a store ship to Edward Augustus Inglefield's Arctic expedition. They had both been broken up by 1865.

HMS <i>Dee</i> (1832) Sloop of the Royal Navy

HMS Dee was the first paddle steamer ordered for the Royal Navy, designed to carry a significant armament. She was ordered on 4 April 1827 from Woolwich Dockyard. She was designed by Sir Robert Seppings, Surveyor of the Navy and modified by Oliver Lang. This vessel was considered as new construction as a previous vessel ordered as a flush deck Cherokee-class brig in 1824, had been renamed African in May 1825. She was initially classed as a steam vessel (SV), and in 1837 reclassified as a steam vessel class 2 (SV2). She was converted to a troopship in May 1842 and as a second class sloop in 1846. She was converted into a storeship in 1868. She was broken at Sheerness in 1871.

References

  1. 1 2 3 4 5 6 "General Taylor", Dictionary of American Naval Fighting Ships .
  2. 1 2 3 Emmons, pp. 30-31.
  3. 1 2 Emmons, pp. 34-35.
  4. 1 2 Chapman, p. 191.
  5. Chapman, p. 219.
  6. Burnett, p. 141.
  7. Chapman, p. 206.
  8. Hamersly, p. 227.
  9. Hamersly, p. 328.
  10. Dixon, p. 472.
  11. 1 2 Message of the President, p. 80.

Bibliography