Vaporific effect

Last updated

The vaporific effect is a flash fire resulting from the impact of high-velocity projectiles with metallic objects. [1] Impacts produce particulate matter originating from either the projectile, the target, or both. Particles heated from the force of impact can burn in the presence of air (oxidizer) or water vapor. An explosion can result from the mixture of metal-dust and air, the resulting dust explosion causing significant overpressure within metallic enclosures (aircraft, vehicles, metallic enclosures, etc.).

Contents

The vaporific effect is particularly pronounced when these enclosures are constructed of pyrophoric metals (metals that react upon contact with air, such as aluminium, magnesium, or their alloys). [1] This effect is often referenced in movies, such as when a single bullet makes a helicopter explode. [2]

1964 study

A November 1964 study by the United States Department of Defense aimed at studying this phenomenon and what causes it. [3] [4] The "Warhead Mechanisms Study" found that dense, white smoke as well as aluminum oxide and iron oxide were present with each vaporific effect. This was greatly diminished in a nitrogen atmosphere (compared to air), thus it was found that the "oxidation of metal fragments is a major factor."

See also

Related Research Articles

<span class="mw-page-title-main">Shaped charge</span> Explosive with focused effect

A shaped charge is an explosive charge shaped to focus the effect of the explosive's energy. Different types of shaped charges are used for various purposes such as cutting and forming metal, initiating nuclear weapons, penetrating armor, or perforating wells in the oil and gas industry.

<span class="mw-page-title-main">Bomb</span> Explosive weapon that uses exothermic reaction

A bomb is an explosive weapon that uses the exothermic reaction of an explosive material to provide an extremely sudden and violent release of energy. Detonations inflict damage principally through ground- and atmosphere-transmitted mechanical stress, the impact and penetration of pressure-driven projectiles, pressure damage, and explosion-generated effects. Bombs have been utilized since the 11th century starting in East Asia.

<span class="mw-page-title-main">Reactive armour</span> Type of vehicle armour

Reactive armour is a type of vehicle armour used in protecting vehicles, especially modern tanks, against shaped charges and hardened kinetic energy penetrators. The most common type is explosive reactive armour (ERA), but variants include self-limiting explosive reactive armour (SLERA), non-energetic reactive armour (NERA), non-explosive reactive armour (NxRA), and electric armour. NERA and NxRA modules can withstand multiple hits, unlike ERA and SLERA.

<span class="mw-page-title-main">Corrosion</span> Gradual destruction of materials by chemical reaction with its environment

Corrosion is a natural process that converts a refined metal into a more chemically stable oxide. It is the gradual deterioration of materials by chemical or electrochemical reaction with their environment. Corrosion engineering is the field dedicated to controlling and preventing corrosion.

<span class="mw-page-title-main">Terminal ballistics</span> Projectiles behavior after reaching their targets

Terminal ballistics is a sub-field of ballistics concerned with the behavior and effects of a projectile when it hits and transfers its energy to a target.

<span class="mw-page-title-main">Effects of nuclear explosions</span> Type and severity of damage caused by nuclear weapons

The effects of a nuclear explosion on its immediate vicinity are typically much more destructive and multifaceted than those caused by conventional explosives. In most cases, the energy released from a nuclear weapon detonated within the lower atmosphere can be approximately divided into four basic categories:

<span class="mw-page-title-main">High-explosive anti-tank</span> Type of shaped charge explosive

High-explosive anti-tank (HEAT) is the effect of a shaped charge explosive that uses the Munroe effect to penetrate heavy armor. The warhead functions by having an explosive charge collapse a metal liner inside the warhead into a high-velocity shaped charge jet; this is capable of penetrating armor steel to a depth of seven or more times the diameter of the charge. The shaped charge jet armor penetration effect is purely kinetic in nature; the round has no explosive or incendiary effect on the armor.

<span class="mw-page-title-main">Spall</span> Fragments broken off a larger solid body of material

Spall are fragments of a material that are broken off a larger solid body. It can be produced by a variety of mechanisms, including as a result of projectile impact, corrosion, weathering, cavitation, or excessive rolling pressure. Spalling and spallation both describe the process of surface failure in which spall is shed.

A tandem-charge or dual-charge weapon is an explosive device or projectile that has two or more stages of detonation, assisting it to penetrate either reactive armour on an armoured vehicle or strong structures.

<span class="mw-page-title-main">Vehicle armour</span> High-strength plating used to fortify important vehicles against bullets, shells etc.

Military vehicles are commonly armoured to withstand the impact of shrapnel, bullets, shells, rockets, and missiles, protecting the personnel inside from enemy fire. Such vehicles include armoured fighting vehicles like tanks, aircraft, and ships.

<span class="mw-page-title-main">Gas duster</span> Product used for cleaning or dusting sensitive devices that cannot be cleaned using water

A gas duster, also known as tinned wind or compressed air, is a product used for cleaning or dusting electronic equipment and other sensitive devices that cannot be cleaned using water.

<span class="mw-page-title-main">Belt armor</span> Armor applied to a warships hull

Belt armor is a layer of heavy metal armor plated onto or within the outer hulls of warships, typically on battleships, battlecruisers and cruisers, and aircraft carriers.

<span class="mw-page-title-main">Explosively formed penetrator</span> Shaped charge designed to penetrate armor effectively

An explosively formed penetrator (EFP), also known as an explosively formed projectile, a self-forging warhead, or a self-forging fragment, is a special type of shaped charge designed to penetrate armor effectively, from a much greater standoff range than standard shaped charges, which are more limited by standoff distance. As the name suggests, the effect of the explosive charge is to deform a metal plate into a slug or rod shape and accelerate it toward a target. They were first developed as oil well perforators by American oil companies in the 1930s, and were deployed as weapons in World War II.

The impact depth of a projectile is the distance it penetrates into a target before coming to a stop. The physicist Sir Isaac Newton first developed this idea to get rough approximations for the impact depth for projectiles traveling at high velocities.

<span class="mw-page-title-main">Dust explosion</span> Rapid combustion of fine particles suspended in the air

A dust explosion is the rapid combustion of fine particles suspended in the air within an enclosed location. Dust explosions can occur where any dispersed powdered combustible material is present in high-enough concentrations in the atmosphere or other oxidizing gaseous medium, such as pure oxygen. In cases when fuel plays the role of a combustible material, the explosion is known as a fuel-air explosion.

<span class="mw-page-title-main">Sandblasting</span> Method of marking or cleaning a surface

Sandblasting, sometimes known as abrasive blasting, is the operation of forcibly propelling a stream of abrasive material against a surface under high pressure to smooth a rough surface, roughen a smooth surface, shape a surface or remove surface contaminants. A pressurised fluid, typically compressed air, or a centrifugal wheel is used to propel the blasting material. The first abrasive blasting process was patented by Benjamin Chew Tilghman on 18 October 1870.

<span class="mw-page-title-main">Ammunition</span> Material fired, scattered, dropped, or detonated from any weapon or weapon system

Ammunition is the material fired, scattered, dropped, or detonated from any weapon or weapon system. Ammunition is both expendable weapons and the component parts of other weapons that create the effect on a target.

In military munitions, a fuze is the part of the device that initiates function. In some applications, such as torpedoes, a fuze may be identified by function as the exploder. The relative complexity of even the earliest fuze designs can be seen in cutaway diagrams.

<span class="mw-page-title-main">Kopp–Etchells effect</span> Corona or halo on the rotor blades of helicopters operating in sandy conditions

The Kopp–Etchells effect is a sparkling ring or disk that is sometimes produced by rotary-wing aircraft when operating in sandy conditions, particularly near the ground at night. The name was coined by photographer Michael Yon to honor two soldiers who were killed in combat; Benjamin Kopp, a US Army Ranger, and Joseph Etchells, a British soldier. Both were killed in combat in Sangin, Afghanistan in July 2009.

<span class="mw-page-title-main">Pit (nuclear weapon)</span> Core of a nuclear implosion weapon

In nuclear weapon design, the pit is the core of an implosion nuclear weapon, consisting of fissile material and any neutron reflector or tamper bonded to it. Some weapons tested during the 1950s used pits made with uranium-235 alone, or as a composite with plutonium. All-plutonium pits are the smallest in diameter and have been the standard since the early 1960s. The pit is named after the hard core found in stonefruit such as peaches and apricots.

References

  1. 1 2 Vaporific Effects in Aircraft Vulnerability and Survivability, Blaze Tech website
  2. Inglis-Arkell, Esther (March 1, 2013). "At last, real-life physics can justify all those fake movie explosions". Gizmodo. Retrieved November 21, 2023.>
  3. https://apps.dtic.mil/sti/pdfs/AD0374745.pdf
  4. "Warhead Mechanisms Study".