Vesicular film

Last updated

Vesicular film, almost universally known as Kalvar, is a type of photographic film that is sensitive only to ultraviolet light and developed simply by heating the exposed film.

Contents

History

It was originally developed at Tulane University in 1956, and then commercialized by the Kalvar Corporation starting the next year. It was originally intended to make copying microfilm simpler, but also found a number of other uses. As the document processing world moved to computerized records, Kalvar was no longer in demand, and vesicular microfilm is now only made upon request.

Kalvar was intended to be used primarily for document storage, copying microfilm or microfiche. In this use the unexposed Kalvar was placed back-to-back with the original, and exposed to collimated UV light. The two films were then separated and the Kalvar run over a heated drum to develop and fix the image. The physical robustness of the Mylar base was an advantage, allowing it to be handled far longer than conventional silver-halide films of the era (early 1960s). The ease of copying also suggested its use in the distribution of movies, and in 1961 Kalvar and Metro-Goldwyn-Mayer formed a joint venture, "Metro Kalvar", to market a system for copying 16 mm and 35 mm black-and-white motion pictures. [1] Both film sizes were commonly used for microfilm already, development was primary machinery related. Kalvar film was limited to reproduction of black and white only although a color process was developed. The color process used entirely too much light to be an economic success and never became commercially available.

Kalvar Corp was not the only company to commercially develop the process. In California, Xidex Corporation developed a similar process and filed a patent on it in the late 1950s. This eventually led to Xidex suing Kalvar for patent infringement, but when Kalvar demonstrated that they had been shipping commercial versions of their film in 1957, over a year before the Xidex filing, Xidex lost the suit. [2] After losing, Xidex simply purchased Kalvar outright. This led to an antitrust suit being filed by the Federal Trade Commission in 1981, and Xidex agreed to sell off the entire Kalvar side of their business (they had several others) in 1983, [3] which failed soon after.

Description

Kalvar film consisted of a diazo compound, diazonium salt, suspended in a saran plastic film. When exposed to ultraviolet (UV) light one of the chemical bonds in the diazo is broken, leaving an isolated nitrogen molecule. The plastic softens when heated, allowing the nitrogen to collect into tiny bubbles, the "vesicles". When the film cools again, the bubbles are trapped in place. The bubbles strongly scatter light, making them appear white in reflected light, but opaque when backlit. Since the bubbles form where the UV light went through the original, the copy is a negative. [4] Because the film was sensitive to UV only, it could be easily handled under normal incandescent lamps with no need for a darkroom, although for archival storage it was placed in UV-protective boxes. The developed film could be stabilized or “fixed” by overall re-exposure to UV light which would destroy the remaining diazonium compound which remained in the un-exposed areas. In this case, the exposure would not be followed by heat “development” and the nitrogen thus created would eventually diffuse into the atmosphere without creating bubbles. This left an inert negative vesicular image simply composed of nitrogen filled bubbles in a relatively stable plastic.

A direct positive print could be made by using a much more gas permeable matrix which, after initial exposure, allowed the nitrogen in the exposed areas to quickly diffuse out into the atmosphere without bubble development. This would be followed by a quick overall re-exposure of the film to a high powered xenon flash lamp which would disrupt the remaining unexposed diazonium sensitizer. The flash would simultaneously heat the plastic matrix to cause bubble formation before the nitrogen molecules could diffuse out. This created a direct positive image when viewed in transmission and a negative image when viewed in reflected light.

In the production process, a solution of Saran dissolved in an organic solvent and containing a small amount of a diazo compound was coated onto a substrate of Mylar. The film was then run through a drying oven to drive off the solvents. The film at this point was clear with a yellow cast from the diazo. In a second process called “cycling,” it was run through a tank of very hot water which created a fog of small holes in the Saran layer. This very greatly increased the photographic speed (light sensitivity) of the film. Several different formulations were in commercial use designed to optimize different photographic parameters for various customers.

The film was remarkably durable and indeed trying to effectively destroy the image was a serious problem when sensitive material needed to be destroyed. Simply heating the film damaged the image, eventually, but usually left it largely intact. Eventually a patented process was developed that accomplished this in a reasonable amount of time.

Since Kalvar film used no chemicals for processing, the equipment needed to use it was limited only by the speed of the transport mechanism and the power of the ultraviolet light. Used as duplication film for photoreconnaissance on carriers during the Vietnam War, processing speeds in excess of 1000 feet per minute were routinely done. A recon plane would make its run over the selected area, and on its way back to the carrier, the silver film used was developed in the aircraft. When it landed on the carrier, the silver film cassette was taken from the plane for duplication and distribution to the various specialists.

The diazo-copying process is not unique to Kalvar; the basic process was already widely used in other copying processes, including the "whiteprint" paper copying system and a number of commercial microfilm copying systems. However, Kalvar was unique in using photo-excited bubbles as the "printing" medium and heat "fixing", which made it much less expensive than the other diazo systems (at least at the time).

Kalvar had been in use for some time when a serious problem was discovered – when the saran plastic broke down it gave off hydrochloric acid. The gas would not corrode the Kalvar film, but would any normal film stored nearby, and especially the storage containers. [5] This was cause for serious concern, as the New York Times had invested heavily in Kalvar copying and had distributed copies of the newspaper on Kalvar microfilm to libraries around the world where they co-mingled with normal films. They had to provide free replacements of their microfilm version when the problem was noticed. [6] Versions of the Kalvar stock using improved supporting film were developed that fixed this problem.

See also

Related Research Articles

<span class="mw-page-title-main">Ultraviolet</span> Form of electromagnetic radiation

Ultraviolet (UV) is a form of electromagnetic radiation with wavelength shorter than that of visible light, but longer than X-rays. UV radiation is present in sunlight, and constitutes about 10% of the total electromagnetic radiation output from the Sun. It is also produced by electric arcs, Cherenkov radiation, and specialized lights, such as mercury-vapor lamps, tanning lamps, and black lights. Although long-wavelength ultraviolet is not considered an ionizing radiation because its photons lack the energy to ionize atoms, it can cause chemical reactions and causes many substances to glow or fluoresce. Many practical applications, including chemical and biological effects, derive from the way that UV radiation can interact with organic molecules. These interactions can involve absorption or adjusting energy states in molecules, but do not necessarily involve heating.

<span class="mw-page-title-main">Blueprint</span> Document reproduction created by using a contact print process on light-sensitive sheets

A blueprint is a reproduction of a technical drawing or engineering drawing using a contact print process on light-sensitive sheets. Introduced by Sir John Herschel in 1842, the process allowed rapid and accurate production of an unlimited number of copies. It was widely used for over a century for the reproduction of specification drawings used in construction and industry. The blueprint process was characterized by white lines on a blue background, a negative of the original. The process was not able to reproduce color or shades of grey.

<span class="mw-page-title-main">Photographic processing</span> Chemical process that transforms a latent image into a visible image

Photographic processing or photographic development is the chemical means by which photographic film or paper is treated after photographic exposure to produce a negative or positive image. Photographic processing transforms the latent image into a visible image, makes this permanent and renders it insensitive to light.

<span class="mw-page-title-main">Negative (photography)</span> Image on photographic film

In photography, a negative is an image, usually on a strip or sheet of transparent plastic film, in which the lightest areas of the photographed subject appear darkest and the darkest areas appear lightest. This reversed order occurs because the extremely light-sensitive chemicals a camera film must use to capture an image quickly enough for ordinary picture-taking are darkened, rather than bleached, by exposure to light and subsequent photographic processing.

<span class="mw-page-title-main">Albumen print</span> Photographic process

The albumen print, also called albumen silver print, was published in January 1847 by Louis Désiré Blanquart-Evrard, and was the first commercially exploitable method of producing a photographic print on a paper base from a negative. It used the albumen found in egg whites to bind the photographic chemicals to the paper and became the dominant form of photographic positives from 1855 to the start of the 20th century, with a peak in the 1860–90 period. During the mid-19th century, the carte de visite became one of the more popular uses of the albumen method. In the 19th century, E. & H. T. Anthony & Company were the largest makers and distributors of albumen photographic prints and paper in the United States.

<span class="mw-page-title-main">Gelatin silver process</span> Photographic process

The gelatin silver process is the most commonly used chemical process in black-and-white photography, and is the fundamental chemical process for modern analog color photography. As such, films and printing papers available for analog photography rarely rely on any other chemical process to record an image. A suspension of silver salts in gelatin is coated onto a support such as glass, flexible plastic or film, baryta paper, or resin-coated paper. These light-sensitive materials are stable under normal keeping conditions and are able to be exposed and processed even many years after their manufacture. The "dry plate" gelatin process was an improvement on the collodion wet-plate process dominant from the 1850s–1880s, which had to be exposed and developed immediately after coating.

<span class="mw-page-title-main">Photogravure</span> Photographic printing technique

Photogravure is a process for printing photographs, also sometimes used for reproductive intaglio printmaking. It is a photo-mechanical process whereby a copper plate is grained and then coated with a light-sensitive gelatin tissue which had been exposed to a film positive, and then etched, resulting in a high quality intaglio plate that can reproduce detailed continuous tones of a photograph.

<span class="mw-page-title-main">Whiteprint</span>

Whiteprint describes a document reproduction produced by using the diazo chemical process. It is also known as the blue-line process since the result is blue lines on a white background. It is a contact printing process which accurately reproduces the original in size, but cannot reproduce continuous tones or colors. The light-sensitivity of the chemicals used was known in the 1890s and several related printing processes were patented at that time. Whiteprinting replaced the blueprint process for reproducing architectural and engineering drawings because the process was simpler and involved fewer toxic chemicals. A blue-line print is not permanent and will fade if exposed to light for weeks or months, but a drawing print that lasts only a few months is sufficient for many purposes.

<span class="mw-page-title-main">Ozalid (trade mark)</span> Process of printing positive images on paper

Ozalid is a registered trademark of a type of paper used for "test prints" in the monochrome classic offset process. The word "Ozalid" is an anagram of "diazol", the name of the substance that the company "Ozalid" used in the fabrication of this type of paper.

<span class="mw-page-title-main">Sun printing</span>

Sun printing may refer to various printing techniques which use sunlight as a developing or fixative agent.

<span class="mw-page-title-main">IBM 1360</span>

The IBM 1360 Photo-Digital Storage System, or PDSS, was an online archival storage system for large data centers. It was the first storage device designed from the start to hold a terabit of data (128 GB). The 1360 stored data on index card sized pieces of stiff photographic film that were individually retrieved and read, and could be updated by copying data, with changes, to a new card. Only six PDSSs were constructed, including the prototype, and IBM abandoned the film-card system and moved on to other storage systems soon after. Only one similar commercial system seems to have been developed, the Foto-Mem FM 390, from the late 1960s.

<span class="mw-page-title-main">Microform</span> Forms with microreproductions of documents

Microforms are scaled-down reproductions of documents, typically either films or paper, made for the purposes of transmission, storage, reading, and printing. Microform images are commonly reduced to about 4% or 1⁄25 of the original document size. For special purposes, greater optical reductions may be used.

A UV coating is a surface treatment which either is cured by ultraviolet radiation, or which protects the underlying material from such radiation's harmful effects. They have come to the fore because they are considered environmentally friendly and do not use solvents or produce volatile organic compounds (VOCs), or Hazardous Air Pollutant (HAPs.

<span class="mw-page-title-main">Architectural reprography</span>

Architectural reprography, the reprography of architectural drawings, covers a variety of technologies, media, and supports typically used to make multiple copies of original technical drawings and related records created by architects, landscape architects, engineers, surveyors, mapmakers and other professionals in building and engineering trades.

<span class="mw-page-title-main">Photosensitive glass</span> Clear glass with microscopic metal particles sensitive to UV light

Photosensitive glass, also known as photostructurable glass (PSG) or photomachinable glass, is a crystal-clear glass that belongs to the lithium-silicate family of glasses, in which an image of a mask can be captured by microscopic metallic particles in the glass when it is exposed to short wave radiations such as ultraviolet light. Photosensitive glass was first discovered by S. Donald Stookey in 1937.

<span class="mw-page-title-main">Photographic film</span> Film used by film (analog) cameras

Photographic film is a strip or sheet of transparent film base coated on one side with a gelatin emulsion containing microscopically small light-sensitive silver halide crystals. The sizes and other characteristics of the crystals determine the sensitivity, contrast, and resolution of the film.

A heliographic copier or heliographic duplicator is an apparatus used in the world of reprography for making contact prints on paper from original drawings made with that purpose on tracing paper, parchment paper or any other transparent or translucent material using different procedures. In general terms some type of heliographic copier is used for making: Hectographic prints, Ferrogallic prints, Gel-lithographs or Silver halide prints. All of them, until a certain size, can be achieved using a contact printer with an appropriate lamp but for big engineering and architectural plans, the heliographic copiers used with the cyanotype and the diazotype technologies, are of the roller type, which makes them completely different from contact printers.

A contact copier, is a device used to copy an image by illuminating a film negative with the image in direct contact with a photosensitive surface. The more common processes are negative, where clear areas in the original produce an opaque or hardened photosensitive surface, but positive processes are available. The light source is usually an actinic bulb internal or external to the device

The conservation and restoration of film is the physical care and treatment of film-based materials. These include photographic film and motion picture film stock.

<span class="mw-page-title-main">IBM microfilm products</span> Microfilm equipment manufactured and sold by IBM in the 1960s

IBM manufactured and sold microfilm products from 1963 till 1969. It is an example of IBM attempting to enter an established market on the basis of a significant technical breakthrough.

References

  1. ↑ "The IPTE Exhibition: Metro Kalvar", The British Journal of Photography, 26 November 1965
  2. ↑ "Kalvar Corporation, Plaintiff-Appellant, v. Xidex Corporation, Defendant-Appellee", 556 F.2d 966 (9th Cir. 1977)
  3. ↑ David Barton and Roger Sherman, "The Price Profit Effects of Horizontal Merger, a case study", Journal of Industrial Economics, Volume 33(2) (1984), pg. 165–177
  4. ↑ Robert T. Nieset, "The Basis of the Kalvar System of Photography", Journal of Photographic Science, Volume 10 (1962), pg. 188
  5. ↑ "Material Name: Kalvar microfilm", Abbey Newsletter, Volume 15, Number 8, December 1991
  6. ↑ "Comment and News", Microform Review, 1972, pg. 164
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.