| O4U Corsair | |
|---|---|
 | |
| Role | Observation |
| National origin | United States |
| Manufacturer | Vought Corporation |
| First flight | XO4U-1:February 1931, XO4U-2:1932 |
| Number built | 1 each |
The Vought O4U Corsair was the designation applied to two different experimental biplane scout-observation aircraft. Neither reached production or entered regular service.
Ordered by the United States Navy in 1930 as the third type of "lightweight" observation aircraft designs, along with the Keystone XOK-1 and the Berliner-Joyce XOJ-1, both of which were built to BuAer Design No. 86, [1] the XO4U-1 was completed to a somewhat different specification. [2]
The Vought XO4U-1, BuNo A-8641, [3] [4] was built in 1931, and was Vought's first airplane with a deep monocoque two-place fuselage, [5] and had a metal and fabric-covered metal wing structure. [6] Both sets of wings joined the fuselage ahead of the pair of cockpits with the pilot seated in a cut out on the trailing edge of the shoulder-mounted slightly-swept upper wing. Photos show the airframe in the factory, fitted with teardrop-shaped wheel pants, but exterior pictures taken during its brief existence do not show these installed. Powered by a 500 hp (370 kW) Pratt & Whitney R-1340D Wasp 9-cylinder air-cooled radial engine driving a two-bladed fixed-pitch propeller. Although designed to serve either as a landplane or on floats, floats had not been fitted before the prototype was destroyed.
After the crash of the XO4U-1, Vought produced a new airframe which was designated the XO4U-2, and assigned the same serial carried by the XO4U-1, A-8641, although several lists of U.S. Navy aircraft serials make no mention of the second design, or the reuse of the Bureau of Aeronautics number. (The same practice was applied to the three Grumman XF3F-1 prototypes, two of which crashed, with all three carrying the same serial number.) This was actually an O3U-3 Corsair featuring that model's rounded fin and rudder, an all-metal wing structure, [7] and was fitted with a cowled Pratt & Whitney R-1535 Twin Wasp Junior, and first flew in June 1932. [8] Aviation historian William T. Larkins observes that under the designation system the XO4U-2 should have been a minor modification of the XO4U-1. [9]
The sole XO4U-1 first flew in February 1931, but crashed on 28 February 1931, when test pilot Carl Harper was unable to recover from a spin. Initially trapped in the cockpit by the inertia of the spin, he escaped to parachute safely as the airframe came down. [10] The airframe was never delivered to the Navy.
The XO4U-2 was sent to the National Advisory Committee for Aeronautics for testing in the 30' X 60' Full Scale Tunnel at Langley Memorial Aeronautical Laboratory at Langley Field, Virginia, in April and May 1933, [11] where it was "flown" under controlled conditions. Part of these tests were to evaluate the cooling of the Pratt & Whitney Twin Wasp radial engine, while others dealt with the relation of the slipstream to stability and control. [12]
The XO4U-2 was still listed in Status of Naval Aircraft as on strength at the Naval Aircraft Factory, Philadelphia, Pennsylvania, as of June 1937. [13]
Data fromEckland, K.O. (25 April 2009). "Aerofiles Vought (Chance Vought), Lewis & Vought, Vought-Sikorsky". Aerofiles.com. USA. Retrieved 20 September 2011.
General characteristics
Performance
The Naval Aircraft Factory (NAF) was established by the United States Navy in 1918 in Philadelphia, Pennsylvania. It was created to help solve aircraft supply issues which the Navy Department faced upon the entry of the U.S. into World War I. The United States Army’s requirements for an enormous quantity of airplanes created a decided lack of interest among aircraft manufacturers in the Navy's requirements for a comparatively small quantity of aircraft. The Navy Department concluded that it was necessary to build a Navy-owned aircraft factory in order to assure a part of its aircraft supply; to obtain cost data for the department’s guidance in its dealings with private manufacturers; and to have under its own control a factory capable of producing experimental designs.
The Vought OS2U Kingfisher is an American catapult-launched observation floatplane. It was a compact mid-wing monoplane, with a large central float and small stabilizing floats. Performance was modest because of its low-powered engine. The OS2U could also operate on fixed, wheeled, taildragger landing gear.
The Pratt & Whitney R-2800 Double Wasp is an American twin-row, 18-cylinder, air-cooled radial aircraft engine with a displacement of 2,800 cu in (46 L), and is part of the long-lived Wasp family of engines.
The Vought SB2U Vindicator is an American carrier-based dive bomber developed for the United States Navy in the 1930s, the first monoplane in this role. Vindicators still remained in service at the time of the Battle of Midway, but by 1943, all had been withdrawn to training units. It was known as the Chesapeake in Royal Navy service.
The Curtiss SBC Helldiver was a two-seat scout bomber and dive bomber built by the Curtiss-Wright Corporation. It was the last combat military biplane procured by the United States Navy. Delivered in 1937, it became obsolete even before World War II and was kept well away from combat with Axis fighters.
The Curtiss SOC Seagull was an American single-engined scout observation seaplane, designed by Alexander Solla of the Curtiss-Wright Corporation for the United States Navy. The aircraft served on battleships and cruisers in a seaplane configuration, being launched by catapult and recovered from a sea landing. The wings folded back against the fuselage for storage aboard ship. When based ashore or on carriers the single float was replaced by fixed wheeled landing gear.
The Vought SBU-1 Corsair was a two-seat, all-metal biplane dive bomber built by Vought Aircraft Company of Dallas, Texas for the US Navy. Its design was based upon the F3U-1 two-seat fighter that was abandoned when the Navy decided not to obtain any more two-seat fighters.
The Berliner-Joyce XFJ was a United States prototype biplane fighter aircraft that first flew in May 1930. Designed by Berliner-Joyce Aircraft for the United States Navy, its lower wing, placed below the fuselage and just two feet above the ground, apparently gave it a tendency to ground loop when landing, and it was never ordered for production.
The Vought O2U Corsair is a 1920s biplane scout and observation aircraft. Developed by Vought Corporation, the O2U was ordered by the United States Navy (USN) in 1927. Powered by a 400 hp (298 kW) Pratt & Whitney R-1340 engine, it incorporated a steel-tube fuselage structure and a wood wing structure with fabric covering. Many were seaplanes or amphibians.
The Grumman XSBF, also known by the company designation G-14, was an American biplane scout bomber developed by Grumman Aircraft for the United States Navy during the 1930s. Derived from Grumman's successful "Fifi" fighter, the aircraft was developed at a time when the biplane was giving way to the monoplane. In competition against other aircraft it proved to possess inferior performance in its intended role, and did not enter production. The sole prototype went on to serve as a liaison aircraft, as well as being used in experiments by NACA, before being destroyed in a crash in 1939.
The Vought XSB3U was an American biplane scout bomber developed by Vought-Sikorsky for the United States Navy during the 1930s. Developed as an alternative to the SB2U Vindicator monoplane, the aircraft proved unsatisfactory to the Navy in comparison, and development was not pursued.
The Berliner-Joyce OJ was an American biplane observation floatplane developed by the Berliner-Joyce Aircraft for the United States Navy during the early 1930s.
The Douglas XFD was a carrier-based biplane fighter aircraft designed for the United States Navy, and the first fighter to be built by the Douglas Aircraft Company. A victim of changing requirements, no production was undertaken.
The Wright XF3W was an American racing aircraft built by Wright Aeronautical for the United States Navy.
The Vought O5U was a 1930s prototype American observation floatplane to meet a United States Navy requirement for a catapult launched scouting aircraft. The contract was won by Curtiss who went on to produce the SOC Seagull; only one O5U was built.
Henry C. Mustin Naval Air Facility, also known as NAF Mustin Field, is a former military airfield located at the United States Navy Naval Aircraft Factory on board the Philadelphia Naval Shipyard, Philadelphia, Pennsylvania. It was in service from 1926 to 1963.
The Naval Aircraft Factory XOSN was an American biplane observation floatplane developed by the Naval Aircraft Factory for the United States Navy during the late 1930s.
The Keystone XOK was an American biplane observation floatplane developed for the United States Navy during the early 1930s.
The Sikorsky XP2S was an American biplane patrol flying boat developed for the United States Navy during the early 1930s.
The Loening XS2L was an American biplane scout amphibian developed by Keystone-Loening, for the United States Navy during the early 1930s.
{{cite web}}: CS1 maint: archived copy as title (link){{cite web}}: CS1 maint: archived copy as title (link)