R-4 / Hoverfly | |
---|---|
General information | |
Type | Helicopter |
Manufacturer | Sikorsky Aircraft |
Designer | |
Primary users | United States Army Air Forces |
Number built | 131 |
History | |
Manufactured | 1942–1944 |
Introduction date | 5 January 1943 |
First flight | January 14, 1942 |
Developed from | Vought-Sikorsky VS-300 |
Developed into | Sikorsky R-6 |
The Sikorsky R-4 is a two-seat helicopter that was designed by Igor Sikorsky with a single, three-bladed main rotor and powered by a radial engine. The R-4 was the world's first large-scale mass-produced helicopter and the first helicopter used by the United States Army Air Forces, [1] the United States Navy, the United States Coast Guard and the United Kingdom's Royal Air Force and Royal Navy. In U.S. Navy and U.S. Coast Guard service, the helicopter was known as the Sikorsky HNS-1. In British service it was known as the Hoverfly.
The VS-316 was developed from the famous experimental VS-300 helicopter, invented by Igor Sikorsky and publicly demonstrated in 1940. The VS-316 was designated the XR-4, under the United States Army Air Forces' series for "Rotorcraft". The XR-4 first flew on 14 January 1942 [2] [3] and was accepted by the Army on 30 May 1942. [4] The XR-4 exceeded all the previous helicopter endurance altitude and airspeed records that had been set before it. [5] The XR-4 completed a 761 mi (1,225 km) cross-country flight from Bridgeport, Connecticut, to Wright Field, Ohio, set a helicopter peak altitude record of 12,000 ft (3,700 m), while achieving 100 flight hours without a major incident and top airspeed approaching 90 mph (78 kn; 145 km/h) [6] [7]
The British Admiralty, having learned of the VS-300, made a ship available, Empire Mersey, fitted with an 80 ft × 40 ft (24 m × 12 m) landing platform, intended to show the USN their work with ship-borne autogyros. [8] After her loss in 1942 to a U-boat, she was replaced by SS Daghestan. [9] The first deck-landing trials aboard Daghestan were carried out in 1944. [8] The British received two of the first eight helicopters built.[ citation needed ]
On 5 January 1943, the United States Army Air Forces ordered 29 prototypes. [6] The first three were designated YR-4A and used for evaluation testing. The YR-4A benefited from a 180 hp (130 kW) Warner R-550-1 Super Scarab engine, compared to the 165 hp (123 kW) Warner R-500-3 in the prototype, and a rotor diameter increased by 1 ft (30 cm). Evaluation of the YR-4A demonstrated a need for further improvements, including moving the tailwheel further aft on the tailboom, venting the exhaust to the side instead of downward, and increasing the fuel capacity by 5 US gal (4.2 imp gal; 19 L). These and other design changes led to the designation of later prototypes as YR-4B, which were used for service testing and flight training.
United Aircraft announced on 5 November 1944 that the one hundredth helicopter had been completed, and that the production rate had reached five every six days. [10]
Following the explosion and sinking in January 1944 of USS Turner, U.S. Coast Guard Commander Frank Erickson flew the first U.S. helicopter rescue in a Sikorsky R-4 carrying life saving blood plasma for the casualties from New York City. [11] On 22–23 April 1944, U.S. Army Lieutenant Carter Harman of the 1st Air Commando Group conducted the first combat rescue by helicopter using a YR-4B in the China-Burma-India theater. [12] Despite the high altitude, humidity, and capacity for only a single passenger, Harman rescued a downed liaison aircraft pilot and his three British soldier passengers, two at a time. [13] On 22–23 January 1945, another rescue by the R-4 involved several legs for refueling and navigating through passes between mountains nearly 10,000 feet (3,000 m) tall, to reach a weather station located at an elevation of 4,700 feet (1,400 m). The higher-than-normal altitude required a downhill run of 20 ft (6.1 m) to get airborne. [14]
While the R-4 was being used for rescues in Burma and China, it was also being used to ferry parts between floating Aviation Repair Units (part of Operation Ivory Soap) in the South Pacific. On 23 May 1944, six ships set sail with two R-4s on board each vessel. The ships had been configured as floating repair depots for damaged Army Air Forces aircraft in the South Pacific. When the helicopters were not being used to fly the parts from one location to another, they were enlisted for medical evacuation and other mercy missions. [15] Helicopter pilot 2LT Louis Carle was assigned to the Brigadier General Clinton W. Russell, the Fifth Aircraft Repair Unit. From June 15 to July 29, 1945, Carle and five other pilots evacuated 75 to 80 wounded soldiers, one or two at a time, from the highlands northeast of Manila. They were the second group of helicopter pilots after Lieutenant Carter Harman to evacuate wounded via helicopter during World War II. Unlike Harman, they were targeted by Japanese soldiers who tried to shoot them down with machine guns. Their six-week effort constitutes the largest combat helicopter operation before the Korean War. [16]
On June 15, 1945, the Fifth Air Force received a request from the 38th Infantry Division to evacuate two soldiers with head injuries from a spot 35 miles (56 km) east of Manila. Carle flew one of his ship's Sikorsky R-4 helicopters and landed near the front lines, much to the amazement of the soldiers, who had never seen a helicopter. The helicopter was not configured to handle stretchers, and they removed a seat and placed the wounded man on the aircraft floor. Carle flew the soldier to the 311th General Field Hospital near Manila. Once word got out of their availability, they were called on again and again. Carle flew seven hours and made six evacuations on the same day. [16]
In Royal Air Force service, the R-4 was called the Hoverfly. [17] The Helicopter Training School, formed January 1945 at RAF Andover, was the first British military unit to be equipped with the helicopter. Many RAF Hoverfly Mark Is were transferred to the Royal Navy for training and one was used in 1945–46 by Fairey Aviation to develop rotor systems for their Gyrodyne helicopter.
The helicopter was difficult to fly. The aircraft's blades were made of wood ribs around a steel spar and covered with doped fabric. The blades were difficult to keep rotating in the same plane and vibrated excessively. The cyclic made continuous small orbits, vibrating continuously. There was no governor to control rotor speed, and the pilot had to correlate the throttle continuously with collective pitch inputs. [16] The Chicago Tribune reported on Carle's efforts to transport the wounded. They wrote that the "control stick shakes like a jackhammer, and the pilot must hold it tightly at all times. Should he relax for even a minute the plane falls out of control. Pilots of regular planes say it's easy to identify a helicopter pilot –he has a permanent case of the shakes." [18]
Data from [45]
General characteristics
Performance
Related development
Aircraft of comparable role, configuration, and era
The Sikorsky SH-3 Sea King is an American twin-engined anti-submarine warfare (ASW) helicopter designed and built by Sikorsky Aircraft. A landmark design, it was one of the first ASW rotorcraft to use turboshaft engines.
The Westland Whirlwind helicopter was a British licence-built version of the U.S. Sikorsky S-55/H-19 Chickasaw. It primarily served with the Royal Navy's Fleet Air Arm in anti-submarine and search and rescue roles. It was also exported to other countries, and the Whirlwind was succeeded by the turbine powered Westland Wessex which was developed from the H-19/Whirlwind. The helicopter was made in many variants using a variety of radial (piston) and turbine engines.
The Westland Wessex is a British-built turbine-powered development of the Sikorsky H-34. It was developed and produced under licence by Westland Aircraft. One of the main changes from Sikorsky's H-34 was the replacement of the piston-engine powerplant with a turboshaft engine. Early models were powered by a single Napier Gazelle engine, while later builds used a pair of de Havilland Gnome engines.
The Sikorsky H-19 Chickasaw is a multi-purpose piston-engined helicopter that was used by the United States Army and United States Air Force. It was also license-built by Westland Aircraft as the Westland Whirlwind in the United Kingdom. United States Navy and United States Coast Guard models were designated HO4S, while those of the U.S. Marine Corps were designated HRS. In 1962, the U.S. Navy, U.S. Coast Guard and U.S. Marine Corps versions were all redesignated as H-19s like their U.S. Army and U.S. Air Force counterparts.
The Bristol Type 171 Sycamore is an early helicopter developed and built by the helicopter division of the Bristol Aeroplane Company. The name refers to the seeds of the sycamore tree, Acer pseudoplatanus, which fall with a rotating motion. It has the distinction of being the first British helicopter to receive a certificate of airworthiness, as well as being the first British-designed helicopter to be introduced by and to serve with the Royal Air Force (RAF).
The Sikorsky H-34 is an American piston-engined military utility helicopter originally designed by Sikorsky as an anti-submarine warfare (ASW) aircraft for the United States Navy. A development of the smaller Sikorsky H-19 Chickasaw (S-55), the H-34 was originally powered by a radial engine, but was later adapted to turbine power by the British licensee as the Westland Wessex and by Sikorsky as the S-58T. The H-34 was also produced under license in France by Sud Aviation.
RAF Andover is a former Royal Flying Corps and Royal Air Force station in England, 2 miles (3.2 km) west of Andover, Hampshire. As well as RFC and RAF units, units of the Aviation Section, U.S. Signal Corps, Royal Canadian Air Force, United States Army Air Forces, and the Air Transport Auxiliary were also stationed at the airfield.
The Piasecki HUP Retriever or H-25 Army Mule, later UH-25, is a compact single radial engine, twin overlapping tandem rotor utility helicopter developed by the Piasecki Helicopter Corporation of Morton, Pennsylvania. Designed to a United States Navy specification, the helicopter was produced from 1949 to 1954, and was also used by the United States Army and foreign navies. The HUP/H-25 was the first helicopter to be produced with an autopilot and also the first to perform a loop.
The Sikorsky H-5 is a helicopter built by Sikorsky Aircraft Corporation.
The Cierva C.30 is an autogyro designed by Juan de la Cierva and built under licence from the Cierva Autogiro Company by A V Roe & Co Ltd (Avro), Lioré-et-Olivier and Focke-Wulf.
The Westland WS-51 Dragonfly helicopter was built by Westland Aircraft and was an Anglicised licence-built version of the American Sikorsky S-51.
The Bell R-12 was an American 1940s military utility helicopter built by the Bell Helicopter company. The design did not go into full production, but over a dozen prototypes were used for various tests and projects.
The Platt-LePage XR-1, also known by the company designation PL-3, is an early American transverse rotors helicopter, built by the Platt-LePage Aircraft Company of Eddystone, Pennsylvania. The winner of a United States Army Air Corps design competition held in early 1940, the XR-1 was the first helicopter tested by the USAAF, flying in 1941. The flight testing of the XR-1 proved troublesome, and although continued testing showed that the design had promise, other, improved helicopters were becoming available before the XR-1 was ready for service. As a result, the development of the aircraft was terminated in 1945.
The United States Army Aviation Museum is an aviation museum located on Fort Novosel near Daleville, Alabama. It has the largest collection of helicopters held by a museum in the world. The museum features some 50 aircraft on public display with aviation artifacts ranging from a replica of the Wright brothers' Model B military biplane to an RAH-66 Comanche. The museum has over 160 aircraft in its collection and holds 3,000 historical items.
The Kellett XR-8 was a helicopter built in the United States during World War II. It was a two-seat machine intended to demonstrate the feasibility of a twin-rotor system and, while it accomplished this, it also demonstrated a number of problems that prevented further development of this particular design.
The Kellett XR-10 was a military transport helicopter developed in the United States in the 1940s that only flew in prototype form. It was designed in response to a USAAF Technical Instruction issued for the development of a helicopter to transport passengers, cargo, or wounded personnel within an enclosed fuselage. Kellett's proposal followed the general layout that the company was developing in the XR-8, with twin intermeshing rotors, and was accepted by the Air Force on 16 October over proposals by Sikorsky, Bell, and Platt-LePage.
The Bell H-13 Sioux is an American single-engine light helicopter built by Bell Helicopter and manufactured by Westland Aircraft under license for the British military as the Sioux AH.1 and HT.2. It was the first helicopter to be certified for civil use.
The Sikorsky R-6 is an American light two-seat helicopter of the 1940s. In Royal Air Force and Royal Navy service, it was named the Hoverfly II.
{{cite web}}
: CS1 maint: unfit URL (link)