Gyrodyne RON Rotorcycle

Last updated
XRON-I Rotorcycle
Gyrodyne RON Rotorcycle 4001.jpg
Rotorcycle conducting a test flight
Role Helicopter
National originUnited States
Manufacturer Gyrodyne Company of America
First flight23 November 1955
Primary user United States Navy
Number built10
Developed from Bendix Model 2C
Developed into Gyrodyne QH-50 DASH

The Gyrodyne RON Rotorcycle (originally designated HOG) was a tiny, single-seat helicopter designed under contract for the United States Navy. [1] in the mid-1950s. It later was redesigned for a U.S. Marine Corps requirement for a small personal helicopter that would fulfill an array of roles, including observation, liaison, small unit tactical maneuvers, and which could be dropped to downed airmen behind enemy lines to facilitate their escape. [2]

Contents

Development

Gyrodyne purchased the assets of Bendix Helicopters in 1949, including the Model 2C coaxial helicopter which provided the technology for the XRON-1. In 1951 the Model 2C was demonstrated to the Navy with shortcomings noted in autorotation control. The XRON-I was demonstrated under a new Navy contract NOas 55-388-c for a lightweight single man helicopter.

Design

Gyrodyne's design was an open-framework helicopter with coaxial rotors, which was evaluated with three different power plants (two reciprocating, one turbine).

The XRON-1 used a manually started 40 hp two-cycle engine with a gross weight capability of 500 lb. The fuselage is a simple box-beam construction. The rotor uses co-axial blades which alleviate the need for an anti-torque tail rotor. Yaw control is provided by rotor tip mounted "tip brakes" providing differential torque between the rotors. Gyrodyne patented the control on 24 October 1954 Patent No. 2,835,331. [3] There is a small inverted V-tail for control at forward speeds. The rotors are laminated wood construction. The mast is pressure lubricated and becomes a cooling surface for oil inflight. The landing gear consists of three small wheels. [4]

Operational history

Gyrodyne RON Rotorcycle making a water landing Gyrodyne RON Rotorcycle making water landing.jpg
Gyrodyne RON Rotorcycle making a water landing

The first flight was in November 1955. The two-cycle engine was prone to overheating and other engines were added to the program for testing. The Marine Corps also tested one XRON-1, and three YRON-1 prototypes. [5]

The Marine Corps eventually concluded that both the RON, and the competing Hiller ROE were too heavy and too difficult to fly and abandoned the project. The United States Navy, however, had noticed the compact size and high load-carrying capacity of the RON, and in 1960 awarded a contract to Gyrodyne to produce a radio-controlled drone version of the Rotorcycle, to be used as an Anti-Submarine Warfare platform. Using the dynamic components of the RON, this was eventually developed as the Gyrodyne QH-50.

The Rotorcycle went on to win the prize for most maneuverable helicopter at the Paris Air Show in 1961, and was selected for a 1964 trade fair in Morocco by the United States Department of Commerce.

A two-place enclosed "gyrocycle" commercial variant was proposed after initial tests. [6]

Variants

XRON-1
Prototype
YRON-1
  • Powered by a 55 hp (41 kW) 4-stroke Porsche YO-95-2 model Model GP-702/1 600cc variant with 17 ft (5 m) diameter rotors.
  • Powered by a 55 hp (41 kW) Solar YT62 turbine model with 17 ft (5 m) diameter rotors.
  • Powered by a 72 hp (54 kW) 4-stroke Porsche YO-95-6 engine variant - Rotor diameter increased to 20 ft (6 m), 5 units built and tested at NAS Patuxent River and Camp Pendleton.
  • Powered by a 62 hp (46 kW) Solar T62 gas turbine engine and 15 ft (5 m) diameter rotors. [7]
  • Powered by a 72 hp (54 kW) 4-stroke Porsche YO-95-8 DSN-1/QH-50A engine. [8]
  • Powered by a 125 hp (93 kW) Electric Engine with 50 Min endurance. [9]

On display

The Cradle of Aviation Museum in New York has a XRON-1 on display [10]

The New England Air Museum, Windsor Locks, CT. [11]

Specifications

Data from Jane's All The World's Aircraft 1961–62 [1]

General characteristics

Performance

See also

Related development

Aircraft of comparable role, configuration, and era

Related Research Articles

<span class="mw-page-title-main">Gyrodyne QH-50 DASH</span> Remotely-piloted Anti-Submarine Warfare helicopter

The Gyrodyne QH-50 DASH is a small drone helicopter built by Gyrodyne Company of America for use as a long-range anti-submarine weapon on ships that would otherwise be too small to operate a full-sized helicopter. It remained in production until 1969. Several are still used today for various land-based roles.

<span class="mw-page-title-main">Fairey Jet Gyrodyne</span> Type of aircraft

The Fairey Jet Gyrodyne is a British experimental compound gyroplane built by the Fairey Aviation Company that incorporated helicopter, gyrodyne and autogyro characteristics. The Jet Gyrodyne was the subject of a Ministry of Supply (MoS) research contract to gather data for the follow-up design, the Rotodyne.

<span class="mw-page-title-main">Agusta A.115</span> 1961 Italian light helicopter prototype

The Agusta A.115 was a prototype helicopter flown in 1961 in Italy. It was essentially a Bell 47J-3 with an unclad, tubular tail boom, and powered by a Turbomeca Astazou II turboshaft engine. No production ensued.

<span class="mw-page-title-main">Agusta A.101</span> Type of aircraft

The Agusta A.101 was a large prototype transport helicopter developed in Italy during the 1960s. Despite prospective orders from the Italian armed forces, no buyers emerged and the project was abandoned in 1971.

<span class="mw-page-title-main">Agusta A.104</span> 1960 Italian prototype light helicopter

The Agusta A.104 Helicar was an Italian prototype light commercial helicopter first flown in December 1960.

<span class="mw-page-title-main">Fairey FB-1 Gyrodyne</span> Type of aircraft

The Fairey FB-1 Gyrodyne is an experimental British rotorcraft that used single lifting rotor and a tractor propeller mounted on the tip of the starboard stub wing to provide both propulsion and anti-torque reaction.

The Bensen Mid-Jet was a small helicopter developed by Igor Bensen in the United States in the early 1950s in the hope of attracting the interest of the United States Navy. It was a single-seat, open framework machine based on the B-5 rotor kite with small, gasoline- or fuel oil-burning ramjets mounted as tipjets on the rotor blades. Tests carried out in 1954 showed it to be able to lift four times its own weight and cruise at 75 mph (120 km/h).

<span class="mw-page-title-main">Boeing T50</span>

The Boeing T50 was a small turboshaft engine produced by Boeing. It was the first turboshaft engine to ever power a helicopter: a modified Kaman K-225 in 1951. Based on Boeing's earlier Model 500 gas generator, the T50's main application was in the QH-50 DASH helicopter drone of the 1950s. An up-rated version designated Model 550 was developed to power the QH-50D and was given the military designation T50-BO-12.

<span class="mw-page-title-main">Hiller ROE Rotorcycle</span> Type of aircraft

The Hiller ROE Rotorcycle was a single-seat ultralight helicopter designed in 1953 for a military requirement. A total of 12 were produced for the United States Marine Corps. And in 1954, the Hiller Helicopters was selected by the US Navy's Bureau of Aeronautics to build this design of a one-man, foldable, self-rescue and observation helicopter. It featured a two-blade rotor system. Its original empty weight was 290 lb (132 kg).

<span class="mw-page-title-main">Solar T62</span> Type of aircraft

The Solar T62 Titan is an American gas turbine engine used mainly as a helicopter auxiliary power unit (APU), ground power generator, turboprop engine or helicopter turboshaft engine. A free power turbine version was developed as the Solar T66.

<span class="mw-page-title-main">Dornier Do 32</span> Type of aircraft

The Dornier Do 32E was a simple, collapsible one-man helicopter, designed for military use in Germany in the 1960s. Despite initial hopes of large orders and some proposed civilian roles, only three flew.

The Omega BS-12 was a utility helicopter with high ground clearance designed to carry loads behind the cabin at, or near, the center of gravity.

The Goodyear GA-400R Gizmo was a one-man helicopter proposed for duties such as liaison and observation.

<span class="mw-page-title-main">Dynali H2S</span> Belgian kit helicopter

The Dynali H2S is a Belgian helicopter, designed by Jacky Tonet and produced by Dynali of the Thines district of Nivelles. When it was available the aircraft was supplied as a kit for amateur construction or fully assembled, supplied ready-to-fly.

The Hillberg EH1-01 RotorMouse is an American helicopter that was designed by Donald Gene Hillberg and produced by Hillberg Helicopters of Fountain Valley, California, first flying in 1993. Now out of production, when it was available the aircraft was supplied as a kit for amateur construction.

<span class="mw-page-title-main">Hoppi-Copter</span> Backpack helicopter

The Hoppi-Copter was a functional backpack helicopter developed by the American company Hoppi-Copters Inc. founded by Horace T. Pentecost in the 1940s. The original Hoppi-Copter consisted of two contra-rotating rotors on a pole attached to a motorized backpack. Although it was capable of flight, it was extremely hard to control.

The Aero Eli Servizi Yo-Yo 222 is an Italian helicopter designed and produced by Aero Eli Servizi of L'Aquila. The aircraft is supplied complete and ready-to-fly.

<span class="mw-page-title-main">Dynali H3 EasyFlyer</span> Belgian kit helicopter

The Dynali H3 EasyFlyer, now known as the Sport, is a Belgian helicopter designed and produced by the Dynali of the Thines district of Nivelles. The aircraft is supplied complete and ready-to-fly-aircraft or as a kit for amateur construction.

<span class="mw-page-title-main">Hiller XH-44</span> American experimental helicopter

The Hiller XH-44 Hiller-Copter is an American experimental helicopter designed by Stanley Hiller.

<span class="mw-page-title-main">Nagler-Rolz NR 54</span> Austrian experimental backpack helicopter

The Nagler-Rolz NR 54 is an Austrian experimental foldable backpack helicopter developed during World War II. An enlarged variant, the NR 55, was also built.

References

Citations

  1. 1 2 Taylor 1961, p. 261.
  2. Popular Mechanics. July 1956.{{cite journal}}: Missing or empty |title= (help)
  3. "XRON history" . Retrieved 7 June 2011.
  4. Sport Aviation. November 2011.{{cite journal}}: Missing or empty |title= (help)
  5. Norman Polmar (2004). Historic naval aircraft: from the pages of Naval history magazine . Brassey's. ISBN   9781574885729.
  6. Sport Aviation. December 1958.{{cite journal}}: Missing or empty |title= (help)
  7. "Helicopters of the World". Flight International AIRCRAFT, SPACECRAFT, MISSILES. 77 (2672): p.p.711–718, 725–730. 27 May 1960.
  8. "GYRODYNE XRON - YRON" . Retrieved 25 Oct 2022.
  9. Kenneth I Swartz (January 2020). "Luminati Creates Vertically Integrated VTOL Development Business". Vertiflite.
  10. "SVSM Gallery" . Retrieved 7 June 2011.
  11. "New England Air Museum".

Bibliography

  • The Rotorcycle. Gyrodyne Company of America.
  • Rawlins, Eugene W. (1976). Marines and Helicopters 1946–1962. Washington, D.C.: History and Museums Division Headquarters, United States Marine Corps. p. 89.
  • Simpson, Rod (1998). Airlife's Helicopters and Rotorcraft. Shrewsbury, UK: Airlife Publishing. p. 220. ISBN   9781853109683. OCLC   438025217.
  • Taylor, John W. R. (1961). Jane's All the World's Aircraft 1961–62. London: Sampson Low, Marston & Company, Ltd.
  • Taylor, Michael J. H. (1989). Jane's Encyclopedia of Aviation. London: Studio Editions. p. 455.

Further reading