| R-12/H-12 | |
|---|---|
 | |
| YH-12B | |
| Role | Military utility helicopter |
| Manufacturer | Bell Aircraft |
| First flight | 1946 |
| Status | Pre-production |
| Primary user | United States Air Force |
| Number built | 13 [1] |
The Bell R-12 (later redesignated H-12; company Model 48) was an American 1940s military utility helicopter built by the Bell Helicopter company. [2] The design did not go into full production, but over a dozen prototypes were used for various tests and projects.
During 1946, Bell Helicopter began development of a new utility helicopter, the Model 42, much larger than the Model 47, which utilized a scaled-up version of the Model 47's rotor system. Three prototypes were built, but serious rotor problems and complexity of mechanical systems precluded production. The initial Model 42 variant was civilian, but the United States Air Force ordered the development of its military variant, the Model 48. Two prototypes were ordered as the XR-12, powered by a single 540 hp (403 kW) Pratt & Whitney R-1340-AN-1 radial engine and featuring seating for five. Of very similar construction to the Model 42, the Model 48 had a shorter rotor mast. A production batch of 34 helicopters was ordered, under the designation R-12A, but cancelled in 1947. [1]
Another enlarged prototype (the XR-12B, Model 48A) with seats for eight plus two pilots and a more powerful 600 hp (447 kW) Pratt & Whitney R-1340-55 engine was also ordered, followed by ten pre-series YR-12B helicopters, with a glazed nose, instead of the car-like nose of the Model 42 and XR-12. While under flight test the helicopter was redesignated the H-12, but the results were not satisfactory, as there were major problems with the main rotor due to blade weaving and poor rotor governor performance. [1]
No production H-12 aircraft were built but the prototypes and preproduction aircraft were used for various test and development programs. [1]
United States Data fromBell Aircraft since 1935 [1]
General characteristics
Performance
Related development
Aircraft of comparable role, configuration, and era
The Sikorsky CH-37 Mojave is an American large heavy-lift helicopter of the 1950s.
The Sikorsky H-19 Chickasaw is a multi-purpose piston engined helicopter that was used by the United States Army and United States Air Force. It was also license-built by Westland Aircraft as the Westland Whirlwind in the United Kingdom. United States Navy and United States Coast Guard models were designated HO4S, while those of the U.S. Marine Corps were designated HRS. In 1962, the U.S. Navy, U.S. Coast Guard and U.S. Marine Corps versions were all redesignated as H-19s like their U.S. Army and U.S. Air Force counterparts.
The Hiller YH-32 Hornet was an American ultralight helicopter built by Hiller Aircraft in the early 1950s. It was a small and unique design because it was powered by two Hiller 8RJ2B ramjet engines mounted on the rotor blade tips which weigh 13 lb (5.9 kg) each and deliver an equivalent of 45 hp (34 kW) for a total of 90 hp (67 kW). Versions of the HJ-1 Hornet were built for the United States Army and the United States Navy in the early 1950s.
The Sikorsky R-4 is a two-seat helicopter that was designed by Igor Sikorsky with a single, three-bladed main rotor and powered by a radial engine. The R-4 was the world's first large-scale mass-produced helicopter and the first helicopter used by the United States Army Air Forces, the United States Navy, the United States Coast Guard and the United Kingdom's Royal Air Force and Royal Navy. In U.S. Navy and U.S. Coast Guard service, the helicopter was known as the Sikorsky HNS-1. In British service it was known as the Hoverfly.
The Sikorsky H-5 is a helicopter built by Sikorsky Aircraft Corporation.
The Hiller OH-23 Raven is a three-place, military light observation helicopter based on the Hiller Model 360. The Model 360 was designated by the company as the UH-12, which was first flown in 1948. A Hiller UH-12 was the first helicopter to make a transcontinental flight across the USA, in 1949.
The Bell HSL was an American 1950s anti-submarine warfare (ASW) helicopter built by the Bell Helicopter company, the only tandem rotor type designed by Bell.
The Bell Model 201 was created using a modified Model 47G and was the first Bell helicopter to use a turbine engine.
The Bell UH-1 Iroquois military helicopter, first introduced in 1959, is the first production member of the prolific Huey family of helicopters, and was itself developed in over twenty variants, which are listed below.
The Platt-LePage XR-1, also known by the company designation PL-3, was an early American transverse rotors helicopter, built by the Platt-LePage Aircraft Company of Eddystone, Pennsylvania. The winner of a United States Army Air Corps design competition held in early 1940, the XR-1 was the first helicopter tested by the USAAF, flying in 1941. The flight testing of the XR-1 proved troublesome, and although continued testing showed that the design had promise, other, improved helicopters were becoming available before the XR-1 was ready for service. As a result, the development of the aircraft was terminated in 1945.
The Doman LZ-5 was a utility helicopter developed in the United States in the early 1950s by Doman Helicopters Inc. of Danbury, Connecticut. Despite the procurement of international manufacturing agreements, no series production of the aircraft ever occurred, and only three prototypes were built. Two of these were purchased by the United States Army as the YH-31, but eventually becoming VH-31.
The Firestone XR-9, also known by the company designation Model 45, was a 1940s American experimental helicopter built by the Firestone Aircraft Company for the United States Army Air Forces. Only two were built.
The Sikorsky XH-39, developed by Sikorsky Aircraft in 1954, was the U.S. Army's first turbine-powered helicopter. It was fast and innovative, but ultimately rejected by the United States Army in favor of the Bell UH-1 Iroquois.
The Sikorsky S-52 is a utility helicopter developed by Sikorsky Aircraft in the late 1940s. It was used by the U.S. Navy, Marine Corps, and Coast Guard. The S-52 was the first US helicopter with all-metal rotor blades. Initially a two-seater, it was developed into the four-seat S-52-2 and S-52-3. It was designated HO5S-1 by the U.S. Navy and Marine Corps, HO5S-1G by the Coast Guard, and YH-18A by the U.S. Army, and was used extensively by civil operators after being retired by the military.
The Kellett XR-8 was a helicopter built in the United States during World War II. It was a two-seat machine intended to demonstrate the feasibility of a twin-rotor system and, while it accomplished this, it also demonstrated a number of problems that prevented further development of this particular design.
The Bell Huey family of helicopters includes a wide range of civil and military aircraft produced since 1956 by Bell Helicopter. This H-1 family of aircraft includes the utility UH-1 Iroquois and the derivative AH-1 Cobra attack helicopter series and ranges from the XH-40 prototype, first flown in October 1956 to the 21st-century UH-1Y Venom and AH-1Z Viper. Although not flown in military service in the USA, the Bell 412 served in Canada and Japan, and like the UH-1Y is a twin engine four rotor design based on the Bell 212.
The Bell H-13 Sioux is an American single-engine light helicopter built by Bell Helicopter and manufactured by Westland Aircraft under license for the British military as the Sioux AH.1 and HT.2.
The Piasecki H-16 Transporter was a tandem-rotor transport or rescue helicopter designed by Frank Piasecki and built by Piasecki Helicopter. The prototypes were evaluated by the United States Air Force and Army, but the crash of the second test aircraft led to cancelling the project.
The Bell XH-15 was an American two-seat utility helicopter designed and built by Bell Helicopter, to meet a requirement for a liaison and utility helicopter for the United States Army and United States Air Force.
The Sikorsky R-6 is an American light two-seat helicopter of the 1940s. In Royal Air Force and Royal Navy service, it was named the Hoverfly II.
