| Bell 201/XH-13F | |
|---|---|
 Bell 201/XH-13F in a hover | |
| General information | |
| Type | Experimental helicopter |
| National origin | United States |
| Manufacturer | Bell Aircraft |
| Primary users | United States Army |
| Number built | 1 |
| History | |
| First flight | 20 October 1954 |
| Developed from | Bell 47 |
The Bell Model 201 (military designation XH-13F) was created using a modified Model 47G and was the first Bell helicopter to use a turbine engine. [1] [2]
Built at the beginning of 1955 as part of a joint Army/USAF research program, the Model 201 was used to test component for the new XH-40, the prototype for the UH-1 Iroquois. [3] It took to the sky on October 20, 1954, with test pilot Bill Quinlan at the controls. [4] The project engineer for this joint Army/USAF research program was J. R. "Bob" Duppstadt. A license-built development of the French 280-shp Turbomeca Artouste I turboshaft, known as the Continental CAE XT51-T-3, powered the XH-13F. This engine produced 425 shp (317 kW), yet it weighed so little that it had to be mounted behind the helicopter's fuel tanks and rotor mast for weight-and-balance reasons.
The light weight of turbines made them ideal for helicopters, whose performance had long been constrained by the low power-to-weight ratios of piston engines. Turbine power also promised greater reliability and lower maintenance costs. Their drawbacks were higher fuel consumption and a significantly higher purchase price. The latter would limit civil market sales far more than those to the military. Putting a premium on performance and having public funds at their disposal, the world's armed services wholeheartedly embraced turbine power. [5] Pleased with the prototype during its Phase I (factory) testing, Quinlan called the XH-13F the "smoothest Model 47 ever built". At the start of April 1955, the prototype was handed over to usaf Major Jones P. Seigler and First Lieutenant Donald A. Wooley. The two officers, attached to Edwards Air Force Base in California, conducted the Phase II test program at Fort Worth to ensure good coordination with Bell.
Data from International Directory of Civil Aircraft [6]
General characteristics
Performance
Related development
Aircraft of comparable role, configuration, and era
Related lists
The Bell UH-1 Iroquois is a utility military helicopter designed and produced by the American aerospace company Bell Helicopter. It is the first member of the prolific Huey family, as well as the first turbine-powered helicopter in service with the United States military.
The Bell 47 is a single-rotor single-engine light helicopter manufactured by Bell Helicopter. It was based on the third Bell 30 prototype, which was the company's first helicopter designed by Arthur M. Young. The 47 became the first helicopter certified for civilian use on 8 March 1946. The first civilian delivery was made on 31 December 1946 to Helicopter Air Transport. More than 5,600 Bell 47s were produced, including those under license by Agusta in Italy, Kawasaki Heavy Industries in Japan, and Westland Aircraft in the United Kingdom. The Bell 47J Ranger is a modified version with a fully enclosed cabin and tail boom.
The Lockheed XH-51 is an American single-engine experimental helicopter designed by Lockheed Aircraft, utilizing a rigid rotor and retractable skid landing gear. The XH-51 was selected as the test vehicle for a joint research program conducted by the United States Army and United States Navy to explore rigid rotor technology.
The Bell 214 is a medium-lift helicopter derived from Bell Helicopter's ubiquitous UH-1 Huey series. The Bell 214ST shares the same model number, but is a larger, much-modified twin-engine derivative.
The Bell Model 309 KingCobra was an experimental attack helicopter developed by Bell Helicopter, based on the Bell AH-1 Cobra.
The General Electric T700 and CT7 are a family of turboshaft and turboprop engines in the 1,500–3,000 shp (1,100–2,200 kW) class.
The Bell 204 and 205 are the civilian versions of the UH-1 Iroquois single-engine military helicopter of the Huey family of helicopters. They are type-certificated in the transport category and are used in a wide variety of applications, including crop dusting, cargo lifting, Forestry Operations, and aerial firefighting.
The Rolls-Royce RR300 is a turbine aircraft engine (turboshaft/turboprop) developed for the light helicopter/general aviation market. Rated at up to 300 shp (224 kW) at take-off power, the RR300 is a rebadged and downrated variant of the Rolls-Royce Model 250-C20.
The Bell R-12 was an American 1940s military utility helicopter built by the Bell Helicopter company. The design did not go into full production, but over a dozen prototypes were used for various tests and projects.
The Bell 400 TwinRanger was a prototype four-bladed, twin-engine civil helicopter developed by Bell Helicopter in the 1980s. Both the TwinRanger and another planned version, the Bell 440, were attempts to market a twin-engine development of the Model 206L LongRanger. The Bell 400A was a planned single-engine version of the 400. TwinRanger, however development was canceled when Bell could not acquire enough orders for production. The TwinRanger name was later used for a twin-engine version of the LongRanger produced from 1994 to 1997.
The Enstrom 480 is a small, light helicopter produced by the Enstrom Helicopter Corporation.
The Bell UH-1 Iroquois military helicopter, first introduced in 1959, is the first production member of the prolific Huey family of helicopters, and was itself developed in over twenty variants, which are listed below.
The Sikorsky XH-39, developed by Sikorsky Aircraft in 1954, was the U.S. Army's first turbine-powered helicopter. It was fast and innovative, but ultimately rejected by the United States Army in favor of the Bell UH-1 Iroquois.
The Sikorsky S-52 is a utility helicopter developed by Sikorsky Aircraft in the late 1940s. It was used by the U.S. Navy, Marine Corps, and Coast Guard. The S-52 was the first US helicopter with all-metal rotor blades. Initially a two-seater, it was developed into the four-seat S-52-2 and S-52-3. It was designated HO5S-1 by the U.S. Navy and Marine Corps, HO5S-1G by the Coast Guard, and YH-18A by the U.S. Army, and was used extensively by civil operators after being retired by the military.
The Kamov Ka-126 is a Soviet light utility helicopter with co-axial rotors. Evolved from Ka-26 with engine pods removed from stub wings, fitted with one TVO-100 turboshaft engine positioned on top of fuselage, modified rotor blades, new fuel system.
The Bell Huey family of helicopters includes a wide range of civil and military aircraft produced since 1956 by Bell Helicopter. This H-1 family of aircraft includes the utility UH-1 Iroquois and the derivative AH-1 Cobra attack helicopter series and ranges from the XH-40 prototype, first flown in October 1956, to the 21st-century UH-1Y Venom and AH-1Z Viper. Although not flown in military service in the USA, the Bell 412 served in Canada and Japan and, like the UH-1Y, is a twin engine four rotor design based on the Bell 212.
The Bell 47J Ranger is an American single-engine single-rotor light helicopter manufactured by Bell Helicopter. It was an executive variant of the highly successful Bell 47 and was the first helicopter to carry a United States president.
The Bell H-13 Sioux is an American single-engine light helicopter built by Bell Helicopter and manufactured by Westland Aircraft under license for the British military as the Sioux AH.1 and HT.2. It was the first helicopter to be certified for civil use.
The Piasecki H-16 Transporter was a tandem-rotor transport or rescue helicopter designed by Frank Piasecki and built by Piasecki Helicopter. The prototypes were evaluated by the United States Air Force and Army, but the crash of the second test aircraft led to cancelling the project.
The Continental CAE T51 was a small turboshaft engine produced by Continental Aviation and Engineering (CAE) under license from Turbomeca. A development of the Artouste, it was followed by three additional turboshaft engines, the T72, the T65, and the T67. However, none of these engines, including the T51, entered full production. CAE abandoned turboshaft development in 1967 after the XT67 lost to the Pratt & Whitney Canada PT6T (T400) to power the Bell UH-1N Twin Huey.
