| S-75 ACAP | |
|---|---|
 Sikorsky S-75 ACAP all-composite test aircraft | |
| General information | |
| Type | Experimental helicopter |
| Manufacturer | Sikorsky Aircraft |
| Primary user | United States Army |
| Number built | 2 |
| History | |
| First flight | 27 July 1984 |
| Developed from | Sikorsky S-76 |
The Sikorsky S-75 was a proof-of-concept all-composite helicopter. Sikorsky Aircraft used all-composite materials to replace metal to provide greater strength, lighter weight, lower manufacturing costs, and reduce maintenance costs.
The Sikorsky S-75 was developed under the US Army's Advanced Composite Airframe Program (ACAP), the goal of which was the development of an all-composite helicopter fuselage, lighter and less costly to build than predominantly metal airframes in support of the Light Helicopter Experimental (LHX) program. [1] [2] In February 1981, contracts were awarded to Sikorsky and Bell Helicopter, with Bell submitting its Model D292. The S-75 flew for the first time in 27 July 1984.
The S-75 mated an entirely new composite airframe with the twin turboshaft engines, transmission, and main and tail rotors of Sikorsky's S-76A civil transport helicopter. [1] The S-75's floors, roof and most exterior surfaces were of more ballistically-resistant Kevlar, while most of the aircraft's basic load-bearing structure was built of graphite or a graphite/epoxy blend. The machine was equipped with specially designed impact-resistant crew and passenger seats and high-strength pneumatic shock absorbers on its fixed tricycle landing gear, in keeping with the Army's requirement that the ACAP aircraft meet or exceed all existing military crashworthiness standards. The aircraft was flown by two pilots, and could carry up to six passengers in the 100-cubic-foot (2.8 m3) rear cabin.
The S-75 underwent a 50-hour evaluation by the Army, and was found to have exceeded the weight- and cost-saving criteria set in the original ACAP specification. [1] Sikorsky gained a wealth of data on the fabrication and use of composite airframes through building the S-75, and Sikorsky's later designs incorporated many of its features. Testing of the machine continued through April 1985, after which it was withdrawn from service and placed in long-term storage.
Data from U.S. Army Aircraft Since 1947, [1]
General characteristics
Performance
Related development
Aircraft of comparable role, configuration, and era
Related lists
The Boeing–Sikorsky RAH-66 Comanche is an American stealth armed reconnaissance and attack helicopter designed for the United States Army. Following decades of study and development, the RAH-66 program was cancelled in 2004 before mass production began, by which point nearly US$7 billion had been spent on the program.
The Bell XV-15 is an American tiltrotor VTOL aircraft. It was the second successful experimental tiltrotor aircraft and the first to demonstrate the concept's high speed performance relative to conventional helicopters.
The Sikorsky S-76 is a medium-size commercial utility helicopter designed and produced by the American helicopter manufacturer Sikorsky Aircraft. It is the company's first helicopter specifically developed for the civilian market.
The Bell Helicopter Eagle Eye, Model 918, was an American tiltrotor unmanned aerial vehicle that was offered as one of the competitors in the United States Navy's VT-UAV program.
The Bell 222 is an American twin-engine light helicopter built by Bell Helicopter. The Bell 230 is an improved development with different engines and other minor changes.
The Sikorsky S-67 Blackhawk was a private-venture, prototype attack helicopter built in 1970 with Sikorsky Aircraft research and development (R&D) funds. A tandem, two-seat aircraft designed around the dynamic drive and rotor systems of the Sikorsky S-61, it was designed to serve as an attack helicopter or to transport up to eight troops into combat.
The Lockheed AH-56 Cheyenne is an attack helicopter developed by Lockheed for the United States Army. It rose from the Army's Advanced Aerial Fire Support System (AAFSS) program to field the service's first dedicated attack helicopter. Lockheed designed the Cheyenne using a four-blade rigid-rotor system and configured the aircraft as a compound helicopter with low-mounted wings and a tail-mounted thrusting propeller driven by a General Electric T64 turboshaft engine. The Cheyenne was to have a high-speed dash capability to provide armed escort for the Army's transport helicopters, such as the Bell UH-1 Iroquois.
The Bell ARH-70 Arapaho was an American four-bladed, single-engine, light military helicopter designed for the United States Army's Armed Reconnaissance Helicopter (ARH) program. With a crew of two and optimized for urban combat, the ARH-70 was slated to replace the Army's aging OH-58D Kiowa Warrior.
The Sikorsky S-72 was an experimental Sikorsky Aircraft compound helicopter developed as the Rotor Systems Research Aircraft (RSRA) for the National Aeronautics and Space Administration (NASA) and the United States Army. The RSRA was a testbed for rotor and propulsion systems for high-speed.
The Sikorsky S-69 is an American experimental compound helicopter developed by Sikorsky Aircraft as the demonstrator of the co-axial Advancing Blade Concept (ABC) with United States Army and NASA funding.
The Boeing Vertol YUH-61 was a twin turbine-engined, medium-lift, military assault/utility helicopter. The YUH-61 was the runner-up in the United States Army Utility Tactical Transport Aircraft System (UTTAS) competition in the early 1970s to replace the Bell UH-1 Iroquois helicopter. At the end of the flyoff program, Sikorsky Aircraft was awarded a contract to develop and build its UH-60A entry.
The Bell YAH-63 was an experimental attack helicopter for the Advanced Attack Helicopter (AAH) competition. The Hughes Model 77/YAH-64, later developed into the AH-64 Apache, was selected over Bell's entry.
The Bell Model 309 KingCobra was an experimental attack helicopter developed by Bell Helicopter, based on the Bell AH-1 Cobra.
The Westland Westminster was a British helicopter of the 1950s from Westland Aircraft. A large cargo design, it was powered by two turboshaft engines driving a single, five-bladed rotor. Initially unclad, the all-metal airframe was later enclosed in a fabric covering. Designed and built as a private venture without government assistance, it was cancelled when Westland took over rival helicopter producers and their more advanced projects.
The Boeing Model 360 is an American experimental medium-lift tandem rotor cargo helicopter developed privately by Boeing to demonstrate advanced helicopter technology. The aircraft was intended as a technology demonstrator, with no plans to put the type into production, and many of its design features were carried onto other programs including the RAH-66 Comanche and V-22 Osprey. The sole prototype has been preserved and is a static exhibit at the American Helicopter Museum in West Chester, Pennsylvania.
The Sikorsky XH-39, developed by Sikorsky Aircraft in 1954, was the U.S. Army's first turbine-powered helicopter. It was fast and innovative, but ultimately rejected by the United States Army in favor of the Bell UH-1 Iroquois.
The Sikorsky S-52 is a utility helicopter developed by Sikorsky Aircraft in the late 1940s. It was used by the U.S. Navy, Marine Corps, and Coast Guard. The S-52 was the first US helicopter with all-metal rotor blades. Initially a two-seater, it was developed into the four-seat S-52-2 and S-52-3. It was designated HO5S-1 by the U.S. Navy and Marine Corps, HO5S-1G by the Coast Guard, and YH-18A by the U.S. Army, and was used extensively by civil operators after being retired by the military.
The Bell D-292 was an American experimental helicopter developed by Bell Helicopters for the United States Army Advanced Composite Airframe Program (ACAP), as part of the studies involved in the Light Helicopter Experimental (LHX) program. It had a gross weight of 7525 lbs. The program was intended to demonstrate the advantageous application of advanced composite materials and structural design concepts on the airframe of military helicopters. The primary goal was to reduce the cost of production of the airframes, and reduce their weight by 17%-22% respectively. The airframe costed $185,458. Materials made up 28% of this cost, and labor expenses made up the remaining 72%.
The Light Helicopter Experimental (LHX) program was a 1980s United States Army helicopter procurement project to replace the AH-1 Cobra and OH-58 Kiowa helicopters. The result of this program lead to the development of the RAH-66 Comanche, which was cancelled before entering production.
The Bell V-280 Valor is a tiltrotor aircraft being developed by Bell Helicopter for the United States Army's Future Vertical Lift (FVL) program. The aircraft was officially unveiled at the 2013 Army Aviation Association of America's (AAAA) Annual Professional Forum and Exposition in Fort Worth, Texas. The V-280 made its first flight on 18 December 2017 in Amarillo, Texas.
