T-411 Wolverine | |
---|---|
Role | Homebuilt aircraft |
National origin | United States |
Manufacturer | Washington Aeroprogress |
Status | Production completed |
Number built | At least ten |
Developed from | Khrunichev T-411 Aist |
The Washington T-411 Wolverine is an American homebuilt aircraft that was produced by Washington Aeroprogress of Seattle, Washington, introduced in the 1990s. When it was available the aircraft was supplied as a kit or in the form of plans for amateur construction. [1]
Developed from the Russian Khrunichev T-411 Aist, the T-411 Wolverine features a strut-braced high-wing, a five-seat enclosed cabin with doors, fixed conventional landing gear with wheel pants and a single engine in tractor configuration. [1]
Like its Russian predecessor the T-411 Wolverine was designed for operations from unprepared surfaces. [1]
The aircraft is made from a mix of steel and aluminum, covered in doped aircraft fabric. Its 41.33 ft (12.6 m) span wing is supported by "V" struts and jury struts and has a wing area of 258.9 sq ft (24.05 m2). The cabin width is 45 in (110 cm). The acceptable power range is 300 to 400 hp (224 to 298 kW) and the standard engines used are the 360 hp (268 kW) Vedeneyev M14P radial engine, the 350 hp (261 kW) Continental IO-550 and the 350 hp (261 kW) Lycoming O-540 horizontally opposed powerplants. The aircraft includes provisions for floats and skis. [1]
The T-411 Wolverine has a typical empty weight of 2,425 lb (1,100 kg) and a gross weight of 4,190 lb (1,900 kg), giving a useful load of 1,765 lb (801 kg). With full fuel of 88 U.S. gallons (330 L; 73 imp gal) the payload for the pilot, passengers and baggage is 1,237 lb (561 kg). [1]
The standard day, sea level, no wind, take off with a 360 hp (268 kW) engine is 345 ft (105 m) and the landing roll is 400 ft (122 m). [1]
The manufacturer estimated the construction time from the supplied kit as 1000 hours. [1]
By 1998 the company reported that 10 kits had been sold and were completed and flying. [1]
In May 2014 two examples were registered in the United States with the Federal Aviation Administration, although a total of three had been registered at one time. [2]
Data from AeroCrafter [1]
General characteristics
Performance
The Altitude Radial Rocket is an American amateur-built aircraft, produced by the Altitude Group of Overland Park, Kansas. The aircraft is supplied as a kit for amateur construction.
The US Aviation CAVU is an American high-wing, strut-braced, single-seat, open cockpit, single engine in pusher configuration, ultralight aircraft that was designed and produced by AeroDreams of Manchester, Tennessee, but marketed by US Aviation of St Paul, Minnesota under their brand name. The aircraft was supplied as a kit for amateur construction.
The Slepcev Storch is a Serbian type-certified, kit and ultralight STOL aircraft, designed by Yugoslavian-Australian Nestor Slepcev and currently produced by Storch Aircraft Serbia in several different versions. The ultralight version is a 3/4 scale replica of the Fieseler Fi 156 Storch of the Second World War and is supplied as a kit for amateur construction or as a complete ready-to-fly-aircraft.
The ULBI Wild Thing is a German ultralight aircraft, designed by R. Kurtz and produced by Ultraleicht Bau International (ULBI), of Hassfurt. The aircraft was supplied as a kit for amateur construction or as a complete ready-to-fly-aircraft.
The Adventure Air Adventurer is a family of American homebuilt amphibious flying boats that was designed and produced by Adventure Air of Berryville, Arkansas. When it was available the aircraft was supplied as a kit for amateur construction. The company appears to be out of business.
The Amax Sport 1700 is an Australian homebuilt aircraft that was designed and produced by Amax Engineering of Donvale, Victoria. When it was available the aircraft was supplied as a kit or in the form of plans for amateur construction.
The Associated Air Liberty 181 is an American homebuilt aircraft that was designed and produced by Associated Air of Woodland, Washington, introduced in the late 1990s. When it was available the aircraft was supplied as a kit for amateur construction.
The Bounsall Super Prospector is an American STOL homebuilt aircraft that was designed and produced by Bounsall Aircraft of Mesquite, Nevada, introduced in 1990s. When it was available the aircraft was supplied as a kit or in the form of plans for amateur construction.
The Culp Special is an American aerobatic homebuilt aircraft designed and produced by Culp's Specialties of Shreveport, Louisiana. The aircraft is supplied as a kit or in the form of plans for amateur construction.
The Early Bird Spad 13 is an American homebuilt aircraft that was designed and produced by the Early Bird Aircraft Company of Erie, Colorado. When it was available the aircraft was supplied as a kit and also in the form of plans for amateur construction.
The Early Bird Jenny is an American homebuilt aircraft that was designed by Dennis Wiley and produced by the Early Bird Aircraft Company of Erie, Colorado, also by Leading Edge Airfoils of Peyton, Colorado. When it was available the aircraft was supplied as a kit and also in the form of plans for amateur construction.
The Glassic SQ2000 is an American homebuilt aircraft, designed and produced by Glassic Composites LLC of Sale Creek, Tennessee. When it was available the aircraft was supplied as a kit for amateur construction.
The Laron Wizard is an American homebuilt aircraft produced by Laron Aviation Tech of Borger, Texas. When it was available the aircraft was supplied as a kit for amateur construction.
The Olympic Desert Eagle was an American homebuilt aircraft that was designed and produced by Olympic Ultralights of Port Angeles, Washington. When it was available the aircraft was supplied as a kit for amateur construction.
The Progressive Aerodyne Stingray is an American homebuilt flying boat that was designed by and produced by Progressive Aerodyne of Orlando, Florida, introduced in the 1990s. When it was available the aircraft was supplied as a kit for amateur construction.
The St Croix Pietenopol Aircamper is an American homebuilt aircraft, an adaptation of the classic 1920s Pietenpol Air Camper, re-designed by St Croix Aircraft of Corning, Iowa. When it was available the aircraft was supplied as a partial kit and in the form of plans for amateur construction.
The St Croix Sopwith Triplane is an American homebuilt aircraft that was designed and produced by St Croix Aircraft of Corning, Iowa. When it was available the aircraft was supplied as a kit or in the form of plans for amateur construction. The aircraft is a full-size replica of the 1916 Sopwith Triplane fighter aircraft.
The Synairgie Jet Ranger is a French homebuilt ultralight aircraft that was designed and produced by Synairgie of Montauban, introduced in the 1990s. When it was available the aircraft was supplied as a kit for amateur construction.
The Ultracraft Calypso is a family of Belgian homebuilt aircraft designed and produced by Ultracraft of Heusden-Zolder, introduced in the 1990s. The aircraft is supplied as a complete ready-to-fly aircraft or as a kit for amateur construction.
The V-STOL Pairadigm is an American twin-engine center-line thrust STOL homebuilt aircraft that was designed and produced by V-STOL Aircraft Corporation of Fort Myers, Florida, introduced in the late 1990s. When it was available the aircraft was supplied as a kit for amateur construction.