Weser Flugzeugbau

Last updated
Weser Flugzeugbau GmbH
Weserflug / later Weser AG
Company type Public
Industry Aviation
Predecessor Rohrbach Metall-Flugzeugbau
FoundedBerlin, Germany (1934 (1934))
Defunct1964 (1964) merged to form VFW
Headquarters,
Number of locations
Berlin, Tempelhof Airport
Products Aircraft
Parent Deutsche Schiff- und Maschinenbau AG (DESCHIMAG)

Weser Flugzeugbau GmbH , known as Weserflug, was an aircraft manufacturing company in Germany.

Contents

History

The company was founded in 1934 as a subsidiary of the ship and machine company Deutsche Schiff- und Maschinenbau AG (DESCHIMAG). It began production that year at Berlin Tempelhof, and in Bremen.

In 1935, Dr. Adolf Rohrbach became technical director of a new Weserflug factory at Lemwerder, near Bremen, which opened in 1936. He had been working on ideas for VTOL (Vertical TakeOff and Landing) aircraft since 1933, and now developed them further.

In 1938, the company developed the Weserflug P.1003, a VTOL aircraft. It had 4 m diameter propellers that swivelled between horizontal and vertical, and could fly up to 650 km/h. It requires very complex gearing to tilt the wings without varying the power to the propellers, and therefore was never built.

World War II

During World War II Weserflug had another factory in Liegnitz. It built Ju 188 and Ju 388 bombers, one of which survives in the National Air and Space Museum in Washington, DC.

Perhaps foreseeing the end of the war, the management of Weserflug transferred in 1944 from Berlin to Hoykenkamp, 15 km west of Bremen. It took over buildings previously used by Focke Achgelis. [1]

During 1940-5, Weserflug built 5215 Junkers Ju 87 Stuka planes at Tempelhof. This plant also constructed Fw 190 fighters. Forced labour was used; on 20 April 1944 2,103 of the 4,151 Tempelhof workers were foreign forced labourers.

Ju 86 aircraft were manufactured at Lemwerder.

After the war

At the end of the war, all aircraft production in Germany halted for several years. In 1948 a trustee, Horst Janson, was appointed to collect the assets of Weser AG, to which Weserflug belonged. He was responsible for some postwar reindustrialization in Bremen, such as reactivating the shipbuilding industry, and joined the board of Weser AG. Production of motorized aircraft was forbidden in Germany from 1945 until 1955. In the 1950s the Hoykenkamp area was used for small businesses.

In 1960, while retaining his other commitments to the reindustrialisation of Bremen, Janson became chairman of Weser AG. In 1961, Weserflug joined forces with Focke-Wulf - also of Bremen - and Hamburger Flugzeugbau in the Entwicklungsring Nord (ERNO) to develop rockets. Focke-Wulf and Weserflug formally merged in 1964, becoming Vereinigte Flugtechnische Werke (VFW). Janson retired as chairman of Weser AG in 1969.

Aircraft

See also

Related Research Articles

<span class="mw-page-title-main">Junkers Ju 87</span> 1935 dive bomber aircraft family by Junkers

The Junkers Ju 87, popularly known as the "Stuka", is a German dive bomber and ground-attack aircraft. Designed by Hermann Pohlmann, it first flew in 1935. The Ju 87 made its combat debut in 1937 with the Luftwaffe's Condor Legion during the Spanish Civil War of 1936–1939 and served the Axis in World War II from beginning to end (1939–1945).

<span class="mw-page-title-main">Focke-Wulf Fw 190</span> 1939 fighter aircraft family by Focke-Wulf

The Focke-Wulf Fw 190, nicknamed Würger (Shrike) is a German single-seat, single-engine fighter aircraft designed by Kurt Tank at Focke-Wulf in the late 1930s and widely used during World War II. Along with its well-known counterpart, the Messerschmitt Bf 109, the Fw 190 became the backbone of the Jagdwaffe of the Luftwaffe. The twin-row BMW 801 radial engine that powered most operational versions enabled the Fw 190 to lift larger loads than the Bf 109, allowing its use as a day fighter, fighter-bomber, ground-attack aircraft and to a lesser degree, night fighter.

<span class="mw-page-title-main">Focke-Wulf</span> Defunct German aircraft manufacturer

Focke-Wulf Flugzeugbau AG was a German manufacturer of civil and military aircraft before and during World War II. Many of the company's successful fighter aircraft designs were slight modifications of the Focke-Wulf Fw 190. It is one of the predecessor companies of today's Airbus.

<span class="mw-page-title-main">Focke-Achgelis</span> Defunct German helicopter manufacturer

Focke-Achgelis & Co. G.m.b.H. was a German helicopter company founded in 1937 by Henrich Focke and Gerd Achgelis.

<span class="mw-page-title-main">Henrich Focke</span> German aviation pioneer

Henrich Focke was a German aviation pioneer from Bremen and also a co-founder of the Focke-Wulf company. He is best known as the inventor of the Fw 61, the first successful German helicopter.

Vereinigte Flugtechnische Werke was a West German aerospace manufacturer.

Hamburger Flugzeugbau (HFB) was an aircraft manufacturer, located primarily in the Finkenwerder quarter of Hamburg, Germany. Established in 1933 as an offshoot of Blohm & Voss shipbuilders, it later became an operating division within its parent company and was known as Abteilung Flugzeugbau der Schiffswerft Blohm & Voss from 1937 until it ceased operation at the end of World War II. In the postwar period it was revived as an independent company under its original name and subsequently joined several consortia before being merged to form Messerschmitt-Bölkow-Blohm (MBB). It participates in the present day Airbus and European aerospace programs.

The Entwicklungsring Nord - abbreviated ERNO - was a 1961 joint venture of Bremen-based Weserflug and Focke-Wulf with Hamburger Flugzeugbau to develop parts for rockets and get involved in space activities.

<span class="mw-page-title-main">VFW-Fokker</span> 1969–1980 West German aircraft manufacturer

VFW-Fokker GmbH was a joint venture of Fokker and Vereinigte Flugtechnische Werke (VFW) started in 1969 that, from then on, controlled the ERNO initiative.

The Gerhard Fieseler Werke (GFW) in Kassel was a German aircraft manufacturer of the 1930s and 1940s. The company is remembered mostly for its military aircraft built for the Luftwaffe during the Second World War.

Bücker-Flugzeugbau GmbH was a German aircraft manufacturer founded in 1932. It was most notable for Its highly regarded sports planes which went on to be used as trainers by the Luftwaffe during World War II.

<span class="mw-page-title-main">MG 131 machine gun</span> WWII-era German aircraft heavy machine gun

The MG 131 was a German 13 mm caliber machine gun developed in 1938 by Rheinmetall-Borsig and produced from 1940 to 1945. The MG 131 was designed for use at fixed, flexible or turreted, single or twin mountings in Luftwaffe aircraft during World War II. It was also license-built in Japan for the Imperial Japanese Navy as Type 2 machine gun.

<span class="mw-page-title-main">Deutsche Schiff- und Maschinenbau</span> German shipyard cooperative (1926–45)

Deutsche Schiff- und Maschinenbau Aktiengesellschaft was a cooperation of eight German shipyards in the period 1926 to 1945. The leading company was the shipyard AG Weser in Bremen.

<span class="mw-page-title-main">Focke-Wulf Fw 42</span> Medium bomber project, Germany, cancelled c.1934

The Focke-Wulf Fw 42 was a design for a twin-engined medium bomber, of canard configuration, that was designed by Focke-Wulf Flugzeugbau AG in Germany in the early 1930s. Several air forces expressed interest in the aircraft. However, despite its advanced design being proven sound in wind tunnel testing, the Fw 42 failed to win a contract for development, and no examples of the type were ever built.

<span class="mw-page-title-main">AGO Flugzeugwerke</span>

AGO Flugzeugwerke was a German aircraft manufacturing company from 1911 until 1945. The initials AGO had a variety of meanings during the company's lifetime, but in its final version stood for Apparatebau GmbH Oschersleben. At its peak, the company employed around 4,500 people.

The German Air Ministry had a system for aircraft designation which was an attempt by the aviation authorities of the Third Reich to standardize and produce an identifier for each airframe type produced in Germany. It was in use from 1933 to 1945 though many pre-1933 aircraft were included and the system had changes over those years. As well as aircraft of the Luftwaffe, it covered civilian airliners and sport planes, due to the RLM handing all aviation-related matters in the Third Reich, both civilian and military in nature.

<span class="mw-page-title-main">Focke Rochen</span> Type of aircraft

The Focke Rochen, also known as Focke-Wulf Schnellflugzeug or Focke-Wulf VTOL was a German VTOL aircraft project. Designed by Heinrich Focke of the Focke-Wulf company towards the end of World War II, the project remained unbuilt before the surrender of Nazi Germany, but saw some development in the postwar years. The information about this project is limited; it was named after the ray owing to its unusual shape. The aircraft had an airfoil section with two huge propellers in the center.

References

  1. F.-Herbert Wenz: Flughafen Tempelhof. Chronik des Berliner Werkes der "Weser" Flugzeugbau GmbH Bremen. Bau der Kriegsflugzeuge Ju 87-Stuka und Fw 190 1939-1945. Lemwerder (Stedinger Verlag) 2000. ISBN   3-927697-24-9. 159 pages.