Whisper X350 Generation II

Last updated

X350 Generation II
Role Amateur-built aircraft
National origin South Africa
Manufacturer Whisper Aircraft
StatusIn production (2020)
Developed from Whisper Aircraft Whisper

The Whisper X350 Generation II is a South African amateur-built aircraft, designed in 2015 and produced by Whisper Aircraft of Mossel Bay. The aircraft was developed from the 2004-designed Whisper Aircraft Whisper motorglider. The X350 Generation II is supplied as a kit for amateur construction. [1] [2]

Contents

The X350 Generation II designation indicates a design top speed goal of 350 km/h (189 kn), with the larger engine fitted. [1]

Design and development

The aircraft features a cantilever low-wing, a two-seats-in-side-by-side configuration enclosed cockpit that is 47.2 in (119.9 cm) wide, under an acrylic plastic articulated lift-up bubble canopy. It has fixed optionally tricycle landing gear or conventional landing gear and a single engine in tractor configuration. [1]

The aircraft is predominately made from vacuum-bagged, post-cured carbon fibre composites, with E-glass used for non-structural parts, including the engine cowling, aircraft fairings, wing and tail tips. The structure is 10% anodized aluminum and cadmium-plated steel, with the landing gear legs made from steel. [1] [2]

The design's 26.17 ft (8.0 m) span wing has an area of 122 sq ft (11.3 m2) and mounts plain flaps and features a cruciform tail. The aircraft's recommended engine power range is 160 to 200 hp (119 to 149 kW) and standard engines used include the 160 hp (119 kW) Lycoming O-320, the 180 hp (134 kW) Lycoming O-360, the 200 hp (149 kW) Lycoming IO-390, or the 180 to 200 hp (134 to 149 kW) ULPower UL520i four-stroke powerplants. [1] [2]

The fuel capacity is 32 U.S. gallons (120 L; 27 imp gal) in two fuselage tanks, although future production kits will have 63 U.S. gallons (240 L; 52 imp gal) in a wet wing. [1]

The design has a single centre console-mounted side-stick or optional individual centre stick controls. The ailerons are actuated via push rods, while the elevator has push rods to the tailcone and then cables. The rudder is cable-actuated. There is no elevator trim tab system, but it may be included as a future factory option. Evaluation flights indicated neutral longitudinal stability, however, reducing the need for one. The left seat is equipped with toe-brakes. [1]

The 51% compliant kit includes a mated fuselage and pre-closed wing structures. The aircraft can be constructed in a two-car garage. Construction time from the supplied kit is estimated by the manufacturer as 500 hours. [1] [2]

The design as load factors of +6/-4 g, but is not designed for aerobatics. The instrument panel is made from aluminum. The seats and rudder pedals are independently adjustable. There are optional rear fuselage windows for improved visibility, LED navigation lights and strobe lights on the wing tips and tail. Lightning protection is a factory option. [1] [2]

Operational history

By May 2020 one example had been registered in the United States with the Federal Aviation Administration. [3]

In a 2020 review, Kitplanes writer LeRoy Cook stated, "the Whisper is a sharp-looking side-by-side two-seater, particularly when perched on tailwheel landing gear. Tricycle gear will probably be a popular option, out of necessity for tamer handling and greater tolerance of gusty winds." Cook noted from his evaluation flight, "from my brief sampling, I’d like to see a little more cockpit ventilation, more foot room after the wing fuel system is installed, and enhanced stability with an elevator trim system. I’d also like to revisit it with tricycle gear." He concluded, "there’s a lot to like about the Whisper X350 Gen II: its sleek looks, the blazing cruise speed, a roomy cockpit, and an apparent ease of assembly." [1]

Specifications (X350 Gen II)

Data from Kitplanes [1] and manufacturer [2]

General characteristics

Performance

Related Research Articles

Vans Aircraft RV-8

The Van's RV-8 is a tandem two-seat, single-engine, low-wing homebuilt aircraft sold in kit form by Van's Aircraft. The RV-8 is equipped with conventional landing gear, while the RV-8A version features tricycle landing gear. The design is similar to the earlier RV-4, although it is larger than that earlier model.

The Preceptor STOL King is an American STOL amateur-built aircraft that was designed and produced by Preceptor Aircraft, of Rutherfordton, North Carolina. When it was available the aircraft was supplied as plans or as a kit for amateur construction.

The US Aviation CAVU is an American high-wing, strut-braced, single-seat, open cockpit, single engine in pusher configuration, ultralight aircraft that was designed and produced by AeroDreams of Manchester, Tennessee, but marketed by US Aviation of St Paul, Minnesota under their brand name. The aircraft was supplied as a kit for amateur construction.

Murphy Elite Canadian homebuilt light aircraft

The Murphy Elite is a Canadian light aircraft that was designed and is produced by Murphy Aircraft of Chilliwack, British Columbia. The aircraft is supplied as a kit for amateur construction.

Bushcaddy L-160 Canadian homebuilt light aircraft

The Bushcaddy L-160 is a Canadian kit aircraft that was designed by Jean Eudes Potvin and produced by Club Aeronautique Delisle Incorporated, Canadian Light Aircraft Sales and Service and most recently by Bushcaddy. The aircraft is supplied as a kit for amateur construction.

Bushcaddy L-162 Max Canadian homebuilt light aircraft

The Bushcaddy L-162 Max is a Canadian kit aircraft that was designed by Sean Gilmore and produced by Canadian Light Aircraft Sales and Service and most recently by Bushcaddy. The aircraft is supplied as a kit for amateur construction.

The Bushcaddy L-164 is a Canadian kit aircraft that was designed by Sean Gilmore and produced by Canadian Light Aircraft Sales and Service and most recently by Bushcaddy. The aircraft is supplied as a kit for amateur construction.

Vans Aircraft RV-14 American homebuilt airplane

The Van's Aircraft RV-14 is an American aerobatic kit aircraft designed by Richard VanGrunsven and produced by Van's Aircraft. It was introduced at AirVenture in July 2012. The aircraft is supplied as a kit for amateur construction.

Glasair GlaStar American homebuilt airplane

The Glasair GlaStar is an American amateur-built aircraft that was designed by Tom Hamilton and produced by Stoddard-Hamilton Aircraft and later Glasair Aviation. It was first flown in 1994 and was superseded in production by the Glasair Sportsman 2+2 c. 2005. When it was available the aircraft was supplied as a kit for amateur construction.

Stoddard-Hamilton Glasair II American homebuilt light aircraft

The Stoddard-Hamilton Glasair II is an American amateur-built aircraft that was designed by Tom Hamilton and produced by Stoddard-Hamilton Aircraft and later Glasair Aviation as a kit for amateur construction. It was first flown in 1989, and remained in production in 2012.

Team Tango Foxtrot American homebuilt aircraft

The Team Tango Foxtrot, or Foxtrot 4, is an American amateur-built aircraft, designed and produced by Team Tango of Williston, Florida. The aircraft is supplied as a kit for amateur construction, with or without factory builder assistance.

The Aero Concepts Discovery is an American amateur-built aircraft, produced by Aero Concepts of Florida. The aircraft is supplied as a kit for amateur construction.

Backcountry Super Cubs Mackey SQ2 American homebuilt aircraft

The Backcountry Super Cubs Mackey SQ2 is an American STOL amateur-built aircraft, designed and produced by Backcountry Super Cubs of Douglas, Wyoming. The aircraft is based upon the design of the Piper PA-18 Super Cub and is supplied as a kit for amateur construction.

The Backcountry Super Cubs Supercruiser is an American amateur-built aircraft, designed and produced by Backcountry Super Cubs of Douglas, Wyoming. The aircraft is based upon the design of the Piper PA-12 Super Cruiser and is supplied as a kit for amateur construction.

Backcountry Super Cubs Super Cub American homebuilt aircraft

The Backcountry Super Cubs Super Cub, also referred to as the Supercub replica, is an American amateur-built aircraft, designed and produced by Backcountry Super Cubs of Douglas, Wyoming. The aircraft is based on the design of the Piper PA-18 Super Cub and is supplied as a kit for amateur construction.

Dakota Cub Super 18 American light aircraft

The Dakota Cub Super 18 is an American amateur-built aircraft, designed and produced by Dakota Cub of Sioux Falls, South Dakota. The aircraft is supplied as a kit for amateur construction.

Ravin 500 South African homebuilt aircraft

The Ravin 500 is a South African amateur-built aircraft, designed and produced by Ravin Aircraft of Pretoria. The aircraft first flew on 15 September 2002 and is supplied as a kit for amateur construction or as a complete ready-to-fly aircraft.

The Tapanee Levitation 2 is a Canadian STOL amateur-built aircraft, designed and produced by Tapanee Aviation of Mont-Saint-Michel, Quebec. The aircraft is supplied as a kit for amateur construction.

The Team Mini-Max AeroMax is an American amateur-built aircraft and light-sport aircraft, produced by Team Mini-Max of Niles, Michigan. The aircraft is supplied as a kit for amateur construction.

The Vortech Shadow is an American autogyro that was designed by Tyler Flight, Inc. and produced by Vortech of Fallston, Maryland. The aircraft is supplied as a kit and also in the form of plans for amateur construction. Vortech also supplies rotor blades for the design.

References

  1. 1 2 3 4 5 6 7 8 9 10 11 Cook, LeRoy (12 May 2020). "Kitplanes Flight Review: Whisper X350". Kitplanes. Archived from the original on 13 May 2020. Retrieved 13 May 2020.
  2. 1 2 3 4 5 6 Whisper Aircraft (2019). "X350 Gen II". whisperaircraft.com. Archived from the original on 19 May 2020. Retrieved 13 May 2020.
  3. ↑ Federal Aviation Administration (13 May 2020). "Make / Model Inquiry Results" . Retrieved 13 May 2020.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.