| Twin | |
|---|---|
 | |
| Role | Torpedo bomber |
| Manufacturer | J. Samuel White |
| Designer | Howard T Wright |
| First flight | 1915 (Twin Landplane) |
| Number built | 4 |
The Wight Twin was a British large twin-engined aircraft of the First World War. It was a twin-engined, twin boom biplane. One was built as a landplane for France, while three more similar aircraft were built as Seaplanes for the British Royal Naval Air Service. Both versions were unsuccessful and saw no service.
In summer 1914, just before the outbreak of the First World War, the French government ordered a single example of a twin-engined bomber from the Samuel White shipyard in Cowes, Isle of Wight. The result, designed by Howard T. Wright, chief designer of White's aircraft department (which operated as Wight Aircraft after its location), was a very large twin boom biplane with five-bay folding wings, powered by two 200 hp (149 kW) Salmson water-cooled radial engines fitted in the front of the fuselage booms. The crew of three was housed in a small central nacelle between the twin booms and situated on the lower wing. [1]
The Twin Landplane was completed in July 1915, and was found to have adequate flying characteristics during testing at Eastchurch during August. In September 1915, however, a French test pilot crashed the Twin Landplane during acceptance testing, and the contract for the aircraft was cancelled. [1]
At the same time, the British Admiralty required a long range aircraft capable of carrying the 18 inch torpedoes thought necessary to sink large warships. An order was therefore placed with Samuel White's for a large torpedo carrying aircraft. The resulting Twin Seaplane was based closely on the Twin Landplane, with the central nacelle removed and cockpits for the crew of two fitted in the two fuselages behind the wings. The first prototype, which was delayed by the unavailability of the engines, was completed in 1916, but proved during testing to be unable to carry both a torpedo and a full fuel load. Two modified aircraft followed, with longer float struts and new tail surfaces. These two aircraft also proved underpowered, and the type was abandoned, with the last Twin Seaplane written off in 1917. [2] [3]
Data fromWight Elephants [4]
General characteristics
Performance
Armament
Aircraft of comparable role, configuration, and era
The AD Seaplane Type 1000 also known as the Admiralty Type 1000 and the AD.1 was a British seaplane of the First World War designed to attack German warships. When it first flew, it was the largest British aircraft yet to take to the air.
The Blackburn Shark was a carrier-borne torpedo bomber designed and built by the British aviation manufacturer Blackburn Aircraft. It was originally known as the Blackburn T.S.R., standing for "torpedo-spotter-reconnaissance", in reference to its intended roles. The Shark was the last of Blackburn's biplane torpedo bombers.
The Blackburn Dart was a carrier-based torpedo bomber biplane aircraft, designed and manufactured by the British aviation company Blackburn Aircraft. It was the standard single-seat torpedo bomber operated by the Fleet Air Arm (FAA) between 1923 and 1933.
The Hawker Dantorp H.B. III was a Danish single-engined biplane bomber of the 1930s. The aircraft was a development of the British Hawker Horsley designed for the Danish Navy, but differed in being powered by a radial engine and having a third crew member. Two examples were built in Britain as a precursor to licensed production in Denmark. Financial constraints meant this was not realised and the Hawker-built examples were the only aircraft produced. They served until the German invasion of Denmark in 1940.
The Blackburn T.4 Cubaroo was a British prototype biplane torpedo bomber of the 1920s. Built by Blackburn Aircraft and intended to carry a large 21 in (533 mm) torpedo, the Cubaroo was claimed to be the largest single-engined aircraft in the world at the time of its first flight.
The Wight Converted Seaplane was a British twin-float patrol seaplane produced by John Samuel White & Company Limited.
The Wight Pusher Seaplane, or Navyplane, was a British twin-float patrol seaplane produced by John Samuel White & Company Limited.
The Sopwith Admiralty Type 860 was a 1910s British biplane seaplane torpedo bomber designed and built for the Admiralty by the Sopwith Aviation Company.
The Short Type 166 was a 1910s British two-seat reconnaissance, bombing and torpedo-carrying folder seaplane, designed by Short Brothers.
The Blackburn Type L was a single-engine, two-seat biplane built for the 1914 Daily Mail Circuit of Britain seaplane race of 1914.
The Grahame-White Ganymede was a prototype British heavy night bomber intended to serve with the Royal Air Force in the First World War. A large, three-engined, twin-boom biplane, the sole prototype Ganymede did not fly until after the war had ended, and although an attempt was made to convert the aircraft to an airliner, it was unsuccessful.
The Gloster Goring was a single-engined two-seat biplane designed to meet 1926 Air Ministry specifications for a day/torpedo bomber. It was not put into production and the one aircraft built served later as an engine testbed.
The Norman Thompson N.1B was a prototype British flying boat fighter aircraft of the First World War. A two-seat single-engined pusher biplane, a single example was built in 1917, but no production followed.
The Curtiss C-1 Canada was a twin-engined bomber aircraft of the First World War which was designed by Curtiss of America to be built by their Canadian subsidiary for the British Royal Naval Air Service and Royal Flying Corps. Although large orders were placed, only twelve were built, the type being rejected in favour of more capable aircraft such as the Handley Page O/100.
The Vickers F.B.25 was a British two-seat night fighter prototype of World War I designed to attack enemy airships. Completed in 1917, it failed in its official flight tests that year and no order for production resulted.
The Curtiss CT-1 model 24, a twin engine torpedo bomber mounted on floats, was first flown in 1921.
The Blackburn G.P seaplane,, was a British twin-engine reconnaissance torpedo floatplane of the First World War, built by the Blackburn Aeroplane and Motor Co Ltd.
The Anatra DE was a three-engined prototype Russian medium bomber of World War I. The biplane bomber was designed to hold four people. It was planned to use three engines to reach its target, then return using only one engine, having been lightened after dropping its payload. There was a single 140 hp Salmson engine at the front of the fuselage, and an 80 hp Le Rhône engine on each wing, which turned propellers attached to the rear of the engine, behind the wing. These engines were placed in a pusher configuration, and each wing also had a gun turret one each engine nacelle. In total, the aircraft had three guns, and could carry 400 kg of bombs. The only prototype that was built, weighing 327 kg more than expected, first flew on June 23, 1916. During testing, however, the fuselage and rear propellers became damaged when a tail skid broke, and it became evident that the design needed to be changed; the project was then abandoned.
The Sopwith Admiralty Types 137 and 138 were a pair of single-engine, two-seat naval biplane floatplanes, built to a British Admiralty order in 1914. They were similar in design, but having a more powerful engine the Type 138 was the larger and heavier. They were used in early torpedo dropping experiments in 1914.
The Sopwith Special torpedo seaplane Type C was the first British aircraft designed to drop torpedoes. A single-engine biplane floatplane, it flew in July 1914 but proved unable to lift the design load and was soon abandoned.
