Cessna DC-6

Last updated
Model DC-6
Cessna DC-6A.jpg
The DC-6A
RoleFour-seat tourer
Manufacturer Cessna Aircraft Company
Designer Clyde Cessna
First flight 1929
Primary userUnited States Army Air Corps
Developed from Cessna CW-6

The Cessna Model DC-6 was a 1920s American high-wing four-seat tourer built by the Cessna Aircraft Company. It was used by the United States Army Air Corps as the UC-77/UC-77A.

Contents

Design and development

The DC-6 was a scaled-down four-seat version of the six-seat CW-6. It was rolled out in February 1929 and went into production in two versions, the DC-6A and DC-6B. Both versions were type certificated on October 29, 1929. [1] The Wall Street crash that day and subsequent depression reduced demand for the aircraft and only about 20 of each model were produced.

Operational history

In addition to use as private touring aircraft, DC-6As and DC-6Bs saw use as newspaper delivery aircraft and were impressed as liaison aircraft with the United States Army Air Forces (USAAF) in 1942.

Variants

The DC-6B Cessna DC-6B.jpg
The DC-6B
DC-6
The original aircraft, powered by a 170 hp (130 kW) Curtiss Challenger, developed as a scaled-down Cessna CW-6.
Model DC-6A Chief
Fitted with a 300 hp (220 kW) Wright R-975 (J-6-9) Whirlwind engine; 20 built.
Model DC-6B Scout
Fitted with a 225 hp (168 kW) Wright J-6-7 (R-760) engine; 24 built.
UC-77
Military designation of four DC-6As impressed into service by the USAAF.
UC-77A
Military designation of four DC-6Bs impressed into service by the USAAF.

Operators

Flag of the United States.svg  United States

Specifications (DC-6A Chief)

Data from Aerofiles Cessna [2]

General characteristics

Performance

Related Research Articles

Cessna AT-17 Bobcat American twin-engined advanced trainer aircraft

The Cessna AT-17 Bobcat or Cessna Crane is a twin-engined advanced trainer aircraft designed and made in the United States, and used during World War II to bridge the gap between single-engined trainers and larger multi-engined combat aircraft. The commercial version was the Model T-50, from which the military versions were developed.

Howard DGA-15

The Howard DGA-15 was a single-engine civil aircraft produced in the United States by the Howard Aircraft Corporation from 1939 to 1944. After the United States' entry into World War II, it was built in large numbers for the United States Navy and also served various roles in the United States Army Air Forces.

Stinson Reliant

The Stinson Reliant is a popular single-engine four- to five-seat high-wing monoplane manufactured by the Stinson Aircraft Division of the Aviation Manufacturing Corporation of Wayne, Michigan.

Howard DGA-8

The Howard DGA-8, DGA-9, DGA-11, and DGA-12 were a family of four-place, single-engine, high-wing light monoplanes built by the Howard Aircraft Corporation, Chicago, Illinois from 1936.

Waco Custom Cabin series

The Waco Custom Cabins were a series of up-market single-engined four-to-five-seat cabin sesquiplanes of the late 1930s produced by the Waco Aircraft Company of the United States. "Custom Cabin" was Waco's own description of the aircraft which despite minor differences, were all fabric-covered biplanes.

Cessna 195 American light single radial engine aircraft

The Cessna 190 and 195 Businessliner are a family of light single radial engine powered, conventional landing gear equipped, general aviation aircraft which were manufactured by Cessna between 1947 and 1954.

Cessna Airmaster

The Cessna Airmaster, is a family of single-engined aircraft manufactured by the Cessna Aircraft Company. The Airmaster played an important role in the revitalization of Cessna in the 1930s after the crash of the aviation industry during the Great Depression.

Cessna Model A

The Cessna Model A was a 1920s American high-wing four-seat tourer built by the Cessna Aircraft Company, the first in a long line of high-wing single-engined monoplanes.

Cessna CW-6

The Cessna Model CW-6 was a 1920s American six-seat touring aircraft built by the Cessna Aircraft Company.

Stinson Voyager 1940s American light utility monoplane

The Stinson Voyager was a 1940s American light utility monoplane built by the Stinson Aircraft Company.

Travel Air 2000

The Travel Air 2000/3000/4000 (originally, the Model A, Model B and Model BH were open-cockpit biplane aircraft produced in the United States in the late 1920s by the Travel Air Manufacturing Company. During the period from 1924–1929, Travel Air produced more aircraft than any other American manufacturer, including over 1,000 biplanes. While an exact number is almost impossible to ascertain due to the number of conversions and rebuilds, some estimates for Travel Air as a whole range from 1,200 to nearly 2,000 aircraft.

Ryan S-C

The Ryan S-C (Sports-Coupe) was an American three-seat cabin monoplane designed and built by the Ryan Aeronautical Company. At least one was impressed into service with the United States Army Air Forces as the L-10.

The Boeing Model 203 was a three-seat biplane trainer build by Boeing in the late 1920s and used in the company training school.

Stout Skycar

The Stout Skycar was a series of four one-off American light aircraft of the 1930s.

Stearman XBT-17

The Stearman XBT-17 was a prototype 1940s American two-seat low-wing monoplane primary trainer designed and built by Stearman Aircraft. It was evaluated by the United States Army Air Force in 1942 as the XBT-17.

Hamilton H-47

The Hamilton H-45 and H-47 were six-passenger-seat, all-metal, high-wing monoplanes powered by single Pratt & Whitney radial engines. They were built for passenger and mail-carrying work in the US in the late 1920s.

Waco E series

The Waco E series is a small family of American-built cabin biplanes built between 1939 and 1942, which differed primarily by engine installation.

Aeronca Chief family

The Aeronca K series, Aeronca Chief, Aeronca Super Chief, Aeronca Tandem, Aeronca Scout, Aeronca Sea Scout, Aeronca Champion and Aeronca Defender were a family of American high-winged light touring aircraft, designed and built starting in the late 1930s by Aeronca Aircraft.

G Elias & Brother American Aircraft Manufacturer

G Elias & Brother was and American manufacturer of cabinets and aircraft based in Buffalo, New York in the 1920s. A.G. Elias sat on the Manufacturers Aircraft Association's board of directors along with President Frank H. Russell, VP Glenn L. Martin, Charles L. Laurence, Chance M. Vought, S.S. Bradley, George P. Tidmarsh, and Donald Douglas. E.J Elias promoted the construction of a Buffalo municipal airport to aid the local fledgling airplane industry of five aviation companies constructing airplanes and airplane parts. From 1920 to 1925, Elias company's chief engineer, David Earle Dunlap (1896-1957), designed the Elias EM-2 Expeditionary planes. He designed the NBS-3 bomber fuselage and the Elias M-1 Mail plane. Dunlap's Elias TA-1 design was the first United States Army Air Corps Trainer to have a radial engine. After tests a McCook Field, the Army Air Corps selected other manufacturers over the Elias bomber and trainer. The company designed the Elias EM-1 to meet requirements for a multirole amphibian marine expeditionary aircraft. Elias delivered six production Elias EM-2 aircraft with Liberty engines to the United States Navy in 1922.

The Travel Air Model 10 was a 4-seat single-engined light aircraft of the late 1920s. Twelve aircraft were built before production ended.

References

  1. "Cessna History 1927–1939". Cessna. Archived from the original on August 23, 2012. Retrieved July 24, 2018.
  2. Eckland, K.O. "Cessna". aerofiles.com. Retrieved 17 September 2014.

Commons-logo.svg Media related to Cessna DC-6 at Wikimedia Commons