Production truck

Last updated

Dutchview's DV3 at AVManifestatie in 2008 Dv3 dutchview.JPG
Dutchview's DV3 at AVManifestatie in 2008

A television production truck or OB van is a small mobile production control room to allow filming of events and video production at locations outside a regular television studio. They are used for remote broadcasts, outside broadcasting (OB), and electronic field production (EFP). Some require a crew of as many as 30 people, [1] with additional trucks for additional equipment as well as a satellite truck, which transmits video back to the studio by sending it up through a communications satellite using a satellite dish, which then transmits it back down to the studio. [2] Alternatively, some production trucks include a satellite transmitter and satellite dish for this purpose in a single truck body to save space, time and cost.

Contents

Other television production trucks are smaller in size and generally require two or three people in the field to manage. For instance broadcast journalism reporters providing live television, local news in the field electronic news gathering (ENG) outside a formal television studio. [3] In some cases, it can be a station wagon, people carrier or even a motorbike (especially in cities with congested streets or where a rapid response is needed and a motorbike is more manoeuvrable).

History

Dumont Telecruiser, an early production truck developed by the US DuMont Television Network in 1949 DuMont Telecruiser - Early TV production truck.jpg
Dumont Telecruiser, an early production truck developed by the US DuMont Television Network in 1949
Television South (TVS) OB Unit 1, a Bedford VAL in 1991 TVS OB Unit 1.jpg
Television South (TVS) OB Unit 1, a Bedford VAL in 1991

One of the BBC's early Outside Broadcast vehicles, MCR 1 (short for Mobile Control Room), was built by the joint Marconi-EMI company and delivered to the BBC just in time to televise the Coronation of George VI and Elizabeth in May 1937. [4] MCR 2 was identical to MCR 1 and was delivered in the summer of 1938. The MCRs could handle three cameras. Initially, they were standard Emitrons, but were later supplemented by Super Emitrons, which performed much better than the standard ones in low light. The MCRs were built on the chassis of an AEC Regal single-decker bus.

After World War II, the joint company Marconi-EMI ceased. The BBC ordered two 3-camera MCRs from EMI. The cameras were equipped with CPS tubes, had electronic viewfinders and a 3-lens turret. MCR 4 was delivered in time to be used on the 1948 Olympics. [5] [6]

The BBC continued to develop mobile control rooms throughout the 1950s and 60s. The 1955 MCR13 was the unit the famous Dinky Toys BBC OB van was based on. MCR13 was equipped with three Marconi Image Orthicon cameras using the newly developed 4.5 inch tube. The further evolution of camera and mixing equipment led to the BBC 1963 specification TV90. Ten OB vans were built by Pye to this specification, with the coachwork by Marshall Bus of Cambridge. Pye called them “Main Fleet Scanners”. MCR19 was the first and MCR28 was the final development of the monochrome OB van series. These were equipped with four Pye MK6 cameras, built to meet the BBC specification.[ citation needed ]

Restored 1963 BBC scanner MCR21, with Pye Mk6 tv camera, at Broadcasting House, London, July 2022 Mcrbbc21.jpg
Restored 1963 BBC scanner MCR21, with Pye Mk6 tv camera, at Broadcasting House, London, July 2022

After developing colour television in the mid 1960s, the BBC began to develop a fleet of colour OB units, known as CMCRs. [7] [8] Type 2 scanners, introduced in 1969, first came equipped with Pye PC80 cameras but these were soon superseded by EMI 2001 colour cameras. Nine Type 2 vehicles were built by Pye, with these trucks remaining in service through the 1970s and into the mid 1980s. [9] Throughout this time, they would see use on some of the BBC's most prestigious programmes, including Royal Events, Doctor Who, Wimbledon Championships and Question Time. Type 2 units went on to be replaced by Type 5 units. [10]

Although made from converted HGVs, inside these trucks were incredibly cramped as a result of housing all of the components of a television gallery. The vehicles were normally made up of three sections: [11]

Interior

A typical modern OB vehicle is usually divided into five parts, but many vehicles are customised to specific roles.

Production control

Inside Arena Television OB7's production gallery at the Wimbledon Championships, England Wimbledon OB.JPG
Inside Arena Television OB7's production gallery at the Wimbledon Championships, England
The production control room at an outside broadcast for UEFA Euro 2008 Euro2008 television broadcast 1.jpg
The production control room at an outside broadcast for UEFA Euro 2008

This is the production hub of the vehicle, and is where the majority of the production crew sit in front of a wall of video monitors. The video monitors show all the video feeds from various sources, including computer graphics, professional video cameras, video servers and slow-motion replay machines. The wall of monitors contains a preview monitor showing what could be the next source on air and a program monitor that shows the feed currently going to air or being recorded. The keyed dirty feed (with digital on-screen graphic) is what is actually transmitted back to the central studio that is controlling the outside broadcast. [13] A clean feed (without the graphics) could be sent to other vehicles for use in their production. [14] Behind the directors there is usually a desk with monitors where the assistant producers can work. It is essential that the directors and assistant producers are in communication with each other during events, so that replays and slow-motion shots can be selected and aired.

Chyron, a well known manufacturer of character generators, “keys” graphics over a specified source the TD chooses, but is generally used for images, and lower third messages, as well as occasionally smaller videos. The Bug Box character generator works the same way but is only for sporting events - the operator is in charge of ensuring that the time, score, and statistics are displayed on the broadcast as appropriate.

Crew

Television director – responsible for directing the overall production, including cameras, replays and inserts
Television producers – responsible for the overall running of the production, liaising with talent and choosing when to take commercial breaks
Technical director (also known as a vision mixer) – operates the vision mixer, switching the video sources, including graphics, to air as directed [15]
Production assistant (also known as a script supervisor) – responsible for communicating with the broadcast channel about timings, counting in and out of breaks, and giving timings on replays and packages [16]
Assistant producers – often there will be an assistant producer who will be the communication link between the director and the VTR crew, providing information on which channel has the best replay of a certain moment for example [16]
Graphics Operator and Graphics Coordinator – There are a wide range of digital on-screen graphic elements used in television production. [17] [18]

Equipment

Vision mixer – switch between multiple video feeds to produce an easy-to-watch television experience.
Video monitor – monitor different routable sources on multiple monitors to help select which feed is the best at any given time.
Character generator – used to generate a variety of graphics that can be keyed over a video source.

Sound

Inside the sound control area of an ABC OB vehicle ABC OB van.jpg
Inside the sound control area of an ABC OB vehicle

This is where the audio engineer (sound supervisor in the UK) uses a mixing console (being fed with all the various audio feeds: reporters, commentary, on-field microphones, etc.) to control which channels are added to the output and follows instructions from the director. They ensure that the audio is within pre-set limits, typically with the help of peak programme meters and loudness monitors. They relay the information from producers and directors to their A2's (audio assistants) who typically set up the audio cables and equipment throughout the arenas and the booth where the commentators sit. The audio engineer normally also has a dirty feed monitor to help with the synchronization of sound and video. Intercom is also generally the responsibility of the sound department.

Crew

Audio mix engineer (A1) (also known as audio mixer, audio director or sound supervisor) – The A1 mixes the sounds that the audience will listen to. They will mix the assorted sounds such as crowd noise, effect sounds, announcers, etc. They route the different sources of sounds from microphones, cameras, discs, video tapes, telephones, EVS, or outside audio sources, into the audio mixing board for control. They are also in charge of ensuring the audio is successfully being transmitted. They also ensure the intercom is working for every station in the production, as well as dial-up coordination with a network director. [16]
Audio assistant (A2) – The A2s work under the direction of the A1 as they set up all the audio equipment around the venue for various sounds. They also set up the intercom system between the production truck and stage or announcer booths. They are also in charge of placing microphones on the talent as they enter and exit. [19]

Equipment

Audio Mixing console – combine any source of audio and change the level and dynamics of the audio, digital or analog audio sources.
Audio router – used to ensure that all sources of audio appear in the right place on the audio mixing console or in other parts of the production truck
Multitrack recording devices – recording individual tracks of the incoming sources allowing for a dub to be done at a later time
Intercom – two-wire or four-wire intercom allows everyone on the production able to communicate quickly and effectively.

VTR

The VTR area has a collection of machines including video servers and may also house additional power supplies or computer equipment. The "tape room" has VTR operators who monitor one or more cameras that go into machines and can be played back for replays when an exciting or important play occurs during the game. These operators can play back in slow motion or pause to show a key part of the action. VTR operators also play replay rollouts that lead into commercial breaks, run title sequences and introductory clips, or show the highlights of the event at the end of play. [20]

This area is often called "EVS", after prominent supplier EVS Broadcast Equipment, who make replay machines and associated software.

Crew

Video Tape Operator (also known as LSM Operator or EVS Operator) – The Tape Operators control the recording equipment, nowadays video servers, that receive the video from the various cameras. They coordinate with the Director on playing back pre-recorded video, and other replays of action they recorded. [16] [21]

Equipment

Video server - used to record, store and play back video clips (and sometimes visual effects) used during the broadcast
Video tape recorder – previously used to record, store and play back video [22]

Racks / engineering

Most production trucks contain a patch panel Patchpanel2.JPG
Most production trucks contain a patch panel

In this area, the professional video cameras are controlled using camera control units (CCU) by multiple vision engineers, to make sure that the iris is at the correct level and that all cameras look the same. These operators shade, balance, and focus the cameras from this position inside the vehicle. This area is controlled by an operator called a V1 (vision supervisor in the UK) and depending on the size of the show may have multiple V2s. This area is also where the majority of the racked technical equipment is stored, including the video router and converters.

Crew

Engineer In Charge (EIC) – a broadcast engineer who has a greater deal of knowledge about the truck than anyone else on the production. They are involved in installing all required equipment, having the correct skills needed to fix and maintain the equipment. EIC’s usually stay on one truck for years learning all the intricacies about each machine and how to fix them in difficult situations. [23]
Vision engineer (also known as a video technician or camera shader) – The vision engineers are in charge of all the cameras' iris and overall look of the camera's video. The vision engineers also troubleshoot issues that may arise with the cameras and cable length.

Equipment

Broadcast reference monitor – used to monitor the output of cameras and the transmission for confidence checking
Video router – send video and audio to any destination from any source.
Frame synchronizer – puts Asynchronous or “wild” video sources into Synchronization with other video signals.
Test card Signal generator – used for checking signal paths and troubleshooting.

Transmission

Some production trucks contain an integrated transmission area, where the outgoing feeds are monitored by the vehicle's engineers to ensure the audience have a good picture and a high-quality signal output. It is then transmitted directly from the truck if it has satellite or fibre uplink facilities, or is sent to other vehicles (typically a dedicated satellite truck) that handle this directly.

Support Vehicles

NEP Adriatic-T tender vehicle at Edinburgh Castle NEP UK's Adriatic-T at Edinburgh Castle.jpg
NEP Adriatic-T tender vehicle at Edinburgh Castle

Production trucks can broadcast from most remote locations and are available in platforms ranging from Ford Transit and Sprinter Vans, self-propelled units up to 45', and trailers up to 53'. However, most larger production trucks will travel with a tender vehicle, which will contain additional equipment that cannot be stored in the production truck itself. This equipment includes:

These vehicles will often contain workbenches for basic maintenance and repairs.

Transmission of video

TV news production truck doing a remote broadcast at New York Passenger Ship Terminal. The tall telescoping antenna is pointed at a receiving antenna on the Empire State Building, allowing the truck to send video by microwave link to the production facility. TV remote pickup Pier 88 jeh.JPG
TV news production truck doing a remote broadcast at New York Passenger Ship Terminal. The tall telescoping antenna is pointed at a receiving antenna on the Empire State Building, allowing the truck to send video by microwave link to the production facility.

The transmission of the raw video feed from the remote location to the studio or master control is called backhaul . There are several ways of transmitting the backhaul:

The earliest method, used before satellites, is to beam the video directly back to the studio using a microwave dish, where another dish receives the signal. [24] Microwave transmission requires an unobstructed line-of-sight path from the transmitting to the receiving antenna, which can be difficult to achieve in urban locations. Some production trucks have a small microwave dish mounted on a telescoping mast, that can be raised 30 to 40 feet to "see" over buildings and other obstructions. It is still used for short ranges.

Communication satellites

An ABS-CBN satellite truck 02292jfHoly Wednesday Good Friday processions Baliuag Bulacan Augustine Parish Churchfvf 11.JPG
An ABS-CBN satellite truck

One of the most common techniques is to use a satellite dish to transmit the video feed on a microwave uplink signal to a communication satellite orbiting the Earth, which then retransmits it back to a dish at the studio. Satellite feed allows televising live events virtually anywhere on Earth. The satellite is in a geostationary orbit about the Earth and so appears at a stationary position in the sky, so the dish merely has to be pointed initially at the satellite when the truck reaches its remote location and does not have to turn to "track" the satellite. Satellite feed became common in the 1970s when there were enough satellites in orbit that a consumer market for satellite use started in television. This open market for satellite space spawned a flurry in mobile satellite uplink trucks for hire, making possible the television viewing of live events all over the world. The first satellite trucks were allocated frequencies in the C band (5.700-6.500 GHz) which required large 2-meter dishes. In the 1980s frequencies in the Ku band (12 to 18 GHz). were authorized, which required only small dishes less than a meter in diameter, but these are not usable in rainy weather because of rain fade. [25]

Today, the satellite dish and microwave transmitter may be on a satellite truck (uplink truck) separate from the production truck, but some production trucks (called "hybrids") also incorporate the satellite dish and transmitter.

Fiber optic lines

Where available, production trucks can use existing high capacity fiber optic cable to send video directly via the Internet to broadcasting companies for distribution. These accept an asynchronous serial interface (ASI) digital stream from the video encoder. This is a very high quality, low loss way of sending video quickly and securely around the world. [26]

Cellular networks

Portable, battery-powered, IP video encoders are sometimes used over cellular modems that leverage a technology called bonded cellular, to transmit video signals from a camera back to a control room or content delivery network. There have been recent tests using 5G for backhaul, with fibre optic as backup. [27]

Related Research Articles

<span class="mw-page-title-main">Sky (New Zealand)</span> Pay television company in New Zealand

Sky Network Television Limited, more commonly known as Sky, is a New Zealand broadcasting company that provides pay television services via satellite, media streaming services, and broadband internet services. As of 31 December 2022, Sky had 1,023,378 residential television subscribers consisting of 517,003 satellite subscribers and 506,375 streaming subscribers. Additionally, Sky had 23,156 broadband customers. Despite the similarity of name, branding and services, such as Sky Go and MySky shared with its European equivalent, Sky Group, there is no connection between the companies.

<span class="mw-page-title-main">Camera control unit</span> Equipment for powering, controling and handling signals of a video camera

The camera control unit (CCU) is typically part of a live television broadcast chain. It is responsible for powering the professional video camera, handling signals sent over the camera cable to and from the camera, and can be used to control various camera parameters remotely.

<span class="mw-page-title-main">Pebble Mill Studios</span> Former BBC television studios in Birmingham, England

Pebble Mill Studios was the BBC's television studio complex located in Edgbaston, Birmingham, England, United Kingdom, which served as the headquarters for BBC Birmingham from 1971 until 2004. The nine-acre site was opened by Princess Anne on 10 June 1971, and in addition to the studios contained two canteens, a post office, gardens, a seven-storey office block, and an outside broadcasting (OB) base.

<span class="mw-page-title-main">Video server</span> Device that is dedicated to delivering video

A video server is a computer-based device that is dedicated to delivering video. Video servers are used in a number of applications, and often have additional functions and capabilities that address the needs of particular applications. For example, video servers used in security, surveillance and inspection applications typically are designed to capture video from one or more cameras and deliver the video via a computer network. In video production and broadcast applications, a video server may have the ability to record and play recorded video, and to deliver many video streams simultaneously.

<span class="mw-page-title-main">Master control</span> Hub of a television broadcast operation

Master control is the technical hub of a broadcast operation common among most over-the-air television stations and television networks. It is distinct from a production control room (PCR) in television studios where the activities such as switching from camera to camera are coordinated. A transmission control room (TCR) is usually smaller in size and is a scaled down version of centralcasting.

<span class="mw-page-title-main">Electronic news gathering</span> Technique of delivering the news on television

Electronic news gathering (ENG) or electronic journalism (EJ) is usage of electronic video and audio technologies by reporters to gather and present news instead of using film cameras. The term was coined during the rise of videotape technology in the 1970s. ENG can involve anything from a single reporter with a single professional video camera, to an entire television crew taking a truck on location.

<span class="mw-page-title-main">Vision mixer</span> Electronic device for selecting and compositing of live video sources

A vision mixer is a device used to select between several different live video sources and, in some cases, compositing live video sources together to create visual effects.

<span class="mw-page-title-main">Television studio</span> Installation in which video productions take place

A television studio, also called a television production studio, is an installation room in which video productions take place, either for the production of live television and its recording onto video tape or other media such as SSDs, or for the acquisition of raw footage for post-production. The design of a studio is similar to, and derived from, movie studios, with a few amendments for the special requirements of television production. A professional television studio generally has several rooms, which are kept separate for noise and practicality reasons. These rooms are connected via 'talkback' or an intercom, and personnel will be divided among these workplaces.

<span class="mw-page-title-main">Production control room</span> Part of a television studio

The production control room (PCR) or studio control room (SCR) is the place in a television studio in which the composition of the outgoing program takes place.

<span class="mw-page-title-main">Electronic field production</span> Video production which takes place outside a television studio

Electronic field production (EFP) is a television industry term referring to a video production which takes place in the field, outside of a formal television studio, in a practical location, special venue or fitting environment. Zettl defines EFP as using "both ENG and studio techniques. From ENG it borrows its mobility and flexibility; from the studio it borrows its production care and quality control. EFP takes place on location and has to adapt to the location conditions... Good lighting and audio are always difficult to achieve in EFP, regardless of whether you are outdoors or indoors. Compared to ENG, in which you simply respond to a situation, EFP needs careful planning."

Video assist is a system used in filmmaking that allows filmmakers to view and distribute a video version of a take immediately after it is filmed. On set, the location where the assist is reviewed is called a video village.

<span class="mw-page-title-main">Outside broadcasting</span> Remote production of television or radio programmes

Outside broadcasting (OB) is the electronic field production (EFP) of television or radio programmes from a mobile remote broadcast television studio. Professional video camera and microphone signals come into the production truck for processing, recording and possibly transmission.

Television crew positions are derived from those of film crew, but with several differences.

In broadcasting, channel playout is the generation of the source signal of a radio or television channel produced by a broadcaster, coupled with the transmission of this signal for primary distribution or direct-to-audience distribution via any network. Such radio or television distribution networks include terrestrial broadcasting, cable networks, satellites, IPTV, OTT Video, point-to-point transport over managed networks or the public Internet, etc.

<span class="mw-page-title-main">Satellite truck</span> Mobile communications satellite earth station

A Satellite Truck is a mobile communications satellite ground station mounted on a truck chassis as a platform. Employed in remote television broadcasts, satellite trucks transmit video signals back to studios or production facilities for editing and broadcasting. Satellite trucks usually travel with a production truck, which contains video cameras, sound equipment and a crew. A satellite truck has a large satellite dish antenna which is pointed at a communication satellite, which then relays the signal back down to the studio. Satellite communication allows transmission from any location that the production truck can reach, provided a line of sight to the desired satellite is available.

<span class="mw-page-title-main">Central apparatus room</span> Room where shared broadcast equipment is located

In broadcast facilities and television studios, a central apparatus room, central machine room, or central equipment room (CER), or central technical area (CTA), or rack room is where shared equipment common to all technical areas is located. Some broadcast facilities have several of these rooms. It should be air-conditioned, however low-noise specifications such as acoustical treatments are optional. Equipment is connected either directly with an attached foldout monitor, keyboard and mouse or remotely via KVM switch, SSH, VNC, RS-232 or remote desktop.

<span class="mw-page-title-main">Operator (profession)</span> Profession that involves the operation of specific equipment or service

An operator is a professional designation used in various industries, including broadcasting, computing, power generation and transmission, customer service, physics, and construction. Operators are day-to-day end users of systems, that may or may not be mission-critical, but are typically managed and maintained by technicians or engineers. They might also work on a 24-hour rotating shift schedule.

<span class="mw-page-title-main">XT3</span> Video server

XT3 is a model of the XT video server. It was created in 2011 by Belgian company EVS Broadcast Equipment.

Link Electronics Ltd. was a major UK industrial and broadcast television equipment manufacturer and systems integrator in the 1970s and 1980s. The company was founded by John Tanner and David Mann, who began manufacturing television cameras in 1966.

Rhodesia Television (RTV) was a live-broadcast, television station operating in Southern Rhodesia (now Zimbabwe) as a private company. It was established on the 14th of November, 1960, first in Salisbury (now Harare), with transmissions in Bulawayo beginning seven months later. It was only the fourth TV service in Africa after Algeria, Nigeria and Egypt, and the first such service in southern Africa, since South Africa did not introduce television until 1976.

References

  1. "Outside Broadcasts". Media College. Retrieved 24 June 2019.
  2. "How SuperSport broadcasts sport – Behind the scenes". MyBroadband. 22 June 2019. Retrieved 24 June 2019.
  3. "Sky News enhances newsgathering with SIS Live". TVBEurope. 20 November 2014. Retrieved 24 June 2019.
  4. "Coronation of King George VI and Queen Elizabeth, 12 May 1937". History of the BBC. BBC. 3 June 2014. Retrieved 16 November 2019.
  5. "TV OUTSIDE BROADCAST HISTORY". TV Outside Broadcast History. Retrieved 2018-05-28.
  6. Webb, Dr Alban. "1948 London Olympics". History of the BBC. BBC. Retrieved 16 November 2019.
  7. "BBC CMCRs - Colour". TV Outside Broadcast History. Retrieved 16 November 2019.
  8. "Outside Broadcast – How television used to be made". Adapt: TV History. Department of Media Arts at Royal Holloway, University of London. Retrieved 16 November 2019.
  9. "BBC Colour Mobile Control Rooms". Vintage Radio. On The Air Ltd. Retrieved 16 November 2019.
  10. "BBC EHX86V CMCR20". Broadcast Engineering Conservation Group . Retrieved 16 November 2019.
  11. "Colour Outside Broadcast Vehicles" (PDF). vtoldboys.com. p. 11. Retrieved 16 November 2019.
  12. John, Ellis; Nick, Hall (2017-11-09). "ADAPT". Figshare. doi:10.17637/rh.c.3925603.v1.
  13. Penzel, Reinhard (24 June 2010). "HD Production: FIFA World Cup 2010". Live Production. Retrieved 24 June 2019.
  14. "Remote cue, clean feed, mix-minus and telephone balance units". www.canford.co.uk. Retrieved 24 June 2019.
  15. "Vision Mixer". Careers in Screen. Retrieved 24 June 2019.
  16. 1 2 3 4 "Meet the players: The outside broadcast crew". Colin Jackson's Raise Your Game. BBC Wales. Retrieved 24 June 2019.
  17. "Graphics Operator TV / Outside Broadcast". Careers in Screen. Retrieved 24 June 2019.
  18. "What is a Graphics Operator?". broadcastgraduate.com. Retrieved 24 June 2019.
  19. "Sound Assistant (Outside Broadcast Unit)". Careers in Screen. Retrieved 24 June 2019.
  20. Cooper, Cath (10 February 2015). "EVS operator Jason Lynn is interviewed by broadcast recruitment specialists Frame 25". Frame 25. Retrieved 24 June 2019.
  21. "EVS Operator". Careers in Screen. Retrieved 24 June 2019.
  22. Hall, Nick; Ellis, John; Murphy, Amanda (19 April 2018). "outsidebroadcast-rigging-bitesize23-videotapedevelopment.mp4". figshare. ADAPT. doi:10.17637/rh.6159656.v1 . Retrieved 24 June 2019.
  23. "Broadcast engineer job profile". www.prospects.ac.uk. Retrieved 24 June 2019.
  24. "Colour Mobile Control Rooms". www.vintageradio.co.uk. Retrieved 24 June 2019.
  25. "Skyware Technologies - Ka vs. Ku - An Unbiased Review". www.skywaretechnologies.com. Retrieved 24 June 2019.
  26. "SIS LIVE expands Anylive network". TVBEurope. 11 September 2016. Retrieved 24 June 2019.
  27. "EE UK Test Live 5G Broadcast from Wembley Stadium with BT Sport". www.ispreview.co.uk. 21 November 2018. Retrieved 24 June 2019.