Rope access

Last updated
Forms of rope access
Viuna jackup .jpg
Repairing on oil platforms and rigs in Iran
Spasskaya Uhrmacher.jpg
Cleaning a clock
Technicien cordiste purge.JPG
Maintenance work on a facade

Rope access or industrial climbing or commercial climbing, is a form of work positioning, initially developed from techniques used in climbing and caving, which applies practical ropework to allow workers to access difficult-to-reach locations without the use of scaffolding, cradles or an aerial work platform. Rope access technicians descend, ascend, and traverse ropes for access and work while suspended by their harnesses. Sometimes a work seat may be used. The support of the rope is intended to eliminate the likelihood of a fall altogether, but a backup fall arrest system (Personal protective equipment) is used in case of the unlikely failure of the primary means of support. This redundancy system is usually achieved by using two ropes - a working line and a safety line. [1] [2]

Contents

See also

Related Research Articles

<span class="mw-page-title-main">Bouldering</span> Form of rock climbing

Bouldering is a form of free climbing that is performed on small rock formations or artificial rock walls without the use of ropes or harnesses. While bouldering can be done without any equipment, most climbers use climbing shoes to help secure footholds, chalk to keep their hands dry and to provide a firmer grip, and bouldering mats to prevent injuries from falls. Unlike free solo climbing, which is also performed without ropes, bouldering problems are usually less than six metres (20 ft) tall. Traverses, which are a form of boulder problem, require the climber to climb horizontally from one end to another. Artificial climbing walls allow boulderers to climb indoors in areas without natural boulders. In addition, bouldering competitions take place in both indoor and outdoor settings.

<span class="mw-page-title-main">Climbing</span> Activity to ascend a steep object

Climbing is the activity of using one's hands, feet, or other parts of the body to ascend a steep topographical object that can range from the world's tallest mountains to small boulders. Climbing is done for locomotion, sporting recreation, for competition, and is also done in trades that rely on ascension, such as rescue and military operations. Climbing is done indoors and outdoors, on natural surfaces, and on artificial surfaces

<span class="mw-page-title-main">Carabiner</span> Shackle with a spring-loaded gate

A carabiner or karabiner, often shortened to biner or to crab, colloquially known as a (climbing) clip, is a specialized type of shackle, a metal loop with a spring-loaded gate used to quickly and reversibly connect components, most notably in safety-critical systems. The word comes from the German Karabiner, short for Karabinerhaken, meaning "carbine rifle hook" used by a carbine rifleman, or carabinier, to attach his carbine to a belt or bandolier.

<span class="mw-page-title-main">Block and tackle</span> System of two or more pulleys and a rope or cable

A block and tackle or only tackle is a system of two or more pulleys with a rope or cable threaded between them, usually used to lift heavy loads.

<span class="mw-page-title-main">Rope</span> Length of braided strands

A rope is a group of yarns, plies, fibres, or strands that are twisted or braided together into a larger and stronger form. Ropes have tensile strength and so can be used for dragging and lifting. Rope is thicker and stronger than similarly constructed cord, string, and twine.

<span class="mw-page-title-main">Glossary of climbing terms</span> For rock climbing and mountaineering

Glossary of climbing terms relates to rock climbing, mountaineering, and to ice climbing.

<span class="mw-page-title-main">Rock-climbing equipment</span> List of manmade gear

Rock-climbing equipment varies with the type of climbing undertaken. Bouldering needs the least equipment outside of shoes and chalk and optional crash pads. Sport climbing adds ropes, harnesses, belay devices, and quickdraws to clip into pre-drilled bolts. Traditional climbing adds the need for carrying a "rack" of temporary passive and active protection devices. Multi-pitch climbing adds devices to assist in ascending and descending fixed ropes. And finally aid climbing uses unique equipment.

<span class="mw-page-title-main">Abseiling</span> Rope-controlled descent

Abseiling, also known as rappelling, is the controlled descent of a steep slope, such as a rock face, by moving down a rope. When abseiling, the person descending controls his own movement down a static or fixed rope, in contrast to lowering off, in which the rope attached to the person descending is paid out by his belayer.

<span class="mw-page-title-main">Belaying</span> Rock climbing safety technique using ropes

Belaying is a variety of techniques climbers use to create friction within a climbing system, particularly on a climbing rope, so that a falling climber does not fall very far. A climbing partner typically applies tension at the other end of the rope whenever the climber is not moving, and removes the tension from the rope whenever the climber needs more rope to continue climbing.

<span class="mw-page-title-main">Fall factor</span> Mathematical ratio relevant to climbing safety

In lead climbing using a dynamic rope, the fall factor (f) is the ratio of the height (h) a climber falls before the climber's rope begins to stretch and the rope length (L) available to absorb the energy of the fall,

<span class="mw-page-title-main">Rock climbing</span> Type of sport

Rock climbing is a sport in which participants climb up, across, or down natural rock formations or indoor climbing walls. The goal is to reach the summit of a formation or the endpoint of a usually pre-defined route without falling. Rock climbing is a physically and mentally demanding sport, one that often tests a climber's strength, endurance, agility and balance along with mental control. Knowledge of proper climbing techniques and the use of specialized climbing equipment is crucial for the safe completion of routes.

Kernmantle rope is rope constructed with its interior core protected by a woven exterior sheath designed to optimize strength, durability, and flexibility. The core fibers provide the tensile strength of the rope, while the sheath protects the core from abrasion during use. This is the only construction of rope that is considered to be life safety rope by most fire and rescue services.

<span class="mw-page-title-main">Offset overhand bend</span> Knot used to join two ropes together

The offset overhand bend is a knot used to join two ropes together end-to-end. It is formed by holding two rope ends next to each other and tying an overhand knot in them as if they were a single line. Due to its common use in several fields, this bend has become known by many names, such as thumb knot, openhand knot, one-sided overhand knot or flat overhand bend (FOB), though the terms "one-sided" and "flat" are considered incorrect.

<span class="mw-page-title-main">Fixed rope</span> Technique in mountaineering

In climbing and mountaineering, a fixed-rope is the practice of securing in-situ anchored static climbing ropes to assist any following climbers to ascend more rapidly—and with less effort—by using mechanical aid devices called ascenders. Fixed ropes also allow climbers to descend rapidly using mechanical devices called descenders. Fixed ropes also help to identify the climbing route in periods of low visibility. The act of climbing up a fixed rope is also called jumaring, which is the name of a particular type of ascender device.

<span class="mw-page-title-main">Prusik knot</span> Type of knot

A Prusik is a friction hitch or knot used to attach a loop of cord around a rope, applied in climbing, canyoneering, mountaineering, caving, rope rescue, ziplining, and by arborists. The term Prusik is a name for both the loops of cord used to tie the hitch and the hitch itself, and the verb is "to prusik" or "prusiking". More casually, the term is used for any friction hitch or device that can grab a rope. Due to the pronunciation, the word is often misspelled Prussik, Prussick, or Prussic.

<span class="mw-page-title-main">Wire rope</span> Metal rope

Wire rope is composed of as few as two solid, metal wires twisted into a helix that forms a composite rope, in a pattern known as laid rope. Larger diameter wire rope consists of multiple strands of such laid rope in a pattern known as cable laid. Manufactured using an industrial machine known as a strander, the wires are fed through a series of barrels and spun into their final composite orientation.

<span class="mw-page-title-main">Safety harness</span> Equipment designed to protect from falling

A safety harness is a form of protective equipment designed to safeguard the user from injury or death from falling. The core item of a fall arrest system, the harness is usually fabricated from rope, braided wire cable, or synthetic webbing. It is attached securely to a stationary object directly by a locking device or indirectly via a rope, cable, or webbing and one or more locking devices. Some safety harnesses are used in combination with a shock-absorbing lanyard, which is used to regulate deceleration and thereby prevent a serious G-force injury when the end of the rope is reached.

<span class="mw-page-title-main">Climbing rope</span> Rope used to secure climbers

A climbing rope is a rope that is used in climbing. It is a critical part of an extensive chain of protective equipment used by climbers to help prevent potentially fatal fall-related accidents.

<span class="mw-page-title-main">Dynamic rope</span> Rope designed to stretch under load

A dynamic rope is a specially constructed, somewhat elastic rope used primarily in rock climbing, ice climbing, and mountaineering. This elasticity, or stretch, is the property that makes the rope dynamic—in contrast to a static rope that has only slight elongation under load. Greater elasticity allows a dynamic rope to more slowly absorb the energy of a sudden load, such from arresting a climber's fall, by reducing the peak force on the rope and thus the probability of the rope's catastrophic failure. A kernmantle rope is the most common type of dynamic rope now used. Since 1945, nylon has, because of its superior durability and strength, replaced all natural materials in climbing rope.

<span class="mw-page-title-main">Petzl Croll</span> Device used in rock climbing

A Petzl Croll is an ascending device used in caving and industrial rope access made by the French company Petzl. Its name comes from the town Crolles where Petzl's company headquarters are located but might also be a reference to the nearby cave system of the Dent de Crolles, the exploration of which triggered a lot of technical effort leading to innovation in caving equipment.

References

  1. "Rope Access | SPRAT" . Retrieved 2021-04-23.
  2. "What is Rope Access | IRATA International". www.irata.org. Retrieved 2021-04-23.