Victorian Railways G class (1877)

Last updated

Victorian Railways G class
Type and origin
Power typeSteam
DesignerMeikle
Builder Williamstown Workshops
Build date1877
Total produced2
Specifications
Configuration:
   Whyte 4-4-0
Gauge 5 ft 3 in (1,600 mm) Victorian broad gauge
Leading dia. 3 ft 1+12 in (952 mm)
Driver dia.4 ft 0 in (1,220 mm)
Tender wheels4 ft 0 in (1,220 mm)
Wheelbase 34 ft 4+12 in (10.478 m)
Length42 ft 8+12 in (13.018 m) [1]
Height12 ft 6 in (3.81 m) [1]
Axle load 10  long tons  14 cwt (24,000 lb or 10.9 t)
Loco weight30  long tons  7 cwt (68,000 lb or 30.8 t)
Tender weight20  long tons  15 cwt (46,500 lb or 21.1 t)
Total weight51  long tons  2 cwt (114,500 lb or 51.9 t)
Fuel typeCoal
Fuel capacity60  long cwt (6,700 lb or 3,000 kg)
Water cap.1,698 imp gal (7,720 L; 2,039 US gal)
Boiler pressureNo. 38 (1904):120  psi (827  kPa)
No. 44 (1904):130  psi (896  kPa) [1]
Heating surface:
  Firebox82.40 sq ft (7.655 m2)
  Tubes794.85 sq ft (73.844 m2)
  Total surface877.25 sq ft (81 m2)
Cylinders 2
Cylinder size 15 in × 18 in (381 mm × 457 mm)
Performance figures
Tractive effort 8,437  lbf (37.53  kN) at 100 psi
Career
Operators Victorian Railways
NumbersG38, G44
First runJanuary 1877
Last run13 August 1904
(27.6 years)
Disposition2 scrapped

The Victorian Railways G class was a class of 4-4-0 light line passenger locomotives operated by the Victorian Railways between 1877 and 1904.

Contents

History

Numbered 38 and 44, numbers vacated by two withdrawn Geelong and Melbourne Railway Company engines. Classed 'G' in 1886. [2]

Production

Built by the Williamstown Workshops in 1877. Design was similar to the 1874 K class in both power and weight. The four-wheel bogie instead of a fixed axle at the front reduced the maximum wheel load a little and improved lateral stability. All Meikle engines had been fitted with almost standard four-wheeled tenders, differing only in minor details, but this new design had a wheelbase of 8 feet compared with 7 feet and had a larger capacity. [2]

Regular service

Based at Castlemaine in the 1890s presumably for the Maldon line. [2]

Design improvements

Both reboilering in 1882. No.38 fitted with an extended smokebox. [2]

Withdrawal

Both the locomotives were scrapped in 1904. [2]

Fleet summary

Key:In ServicePreservedStored or WithdrawnScrapped
LocomotiveBuilder No.Entered serviceWithdrawnScrappedStatusNotes
G38February 18778 August 1904Scrapped [2]
G44January 187713 August 1904Scrapped [2]

Related Research Articles

The DD class (later reclassified into D1, D2 and D3 subclasses) was a passenger and mixed traffic steam locomotive that ran on Victorian Railways from 1902 to 1974. Originally introduced on mainline express passenger services, they were quickly superseded by the much larger A2 class and were relegated to secondary and branch line passenger and goods service, where they gave excellent service for the next fifty years. The DD design was adapted into a 4-6-2T tank locomotive for suburban passenger use, the DDE (later D4) class. They were the most numerous locomotive class on the VR, with a total of 261 DD and 58 locomotives built.

The Phoenix Foundry was a company that built steam locomotives and other industrial machinery in the city of Ballarat, Victoria, Australia. Over 30 years they built 352 locomotives for the Victorian Railways, of 38 different designs.

<span class="mw-page-title-main">Victorian Railways AA class</span>

The AA class was an express passenger locomotive that ran on the Victorian Railways between 1900 and 1932. The largest, heaviest and most powerful 4-4-0 steam locomotive to run in Australia, it was the final development of this locomotive type in Australia.

<span class="mw-page-title-main">Victorian Railways B class</span>

The mainline passenger locomotives, later classified as B class, ran on the Victorian Railways (VR) between 1862 and 1917. They used a 2-4-0 wheel arrangement, which provided greater traction on the new, more heavily graded Geelong–Ballarat railway and the Melbourne-Bendigo-Echuca railway, as opposed to the 2-2-2 arrangement previously selected for the relatively level Geelong line. The B class locomotives are regarded as the first mainline VR motive power, and were highly successful in passenger operations.

Victorian Railways 'Old' V class were the first government goods steam locomotives on Victorian Railways, built by George England & Co. The four 0-6-0 tender locomotives were built in 1857–8 with builder's numbers 142–145. They arrived in Port Phillip in September 1858 along with 2-2-2 passenger locomotive No. 1.

<span class="mw-page-title-main">Victorian Railways Z class</span>

The Victorian Railways Z class were three locomotives built in 1893 in Victoria, Australia

<span class="mw-page-title-main">Victorian Railways E class</span>

The E class was a class of suburban tank steam locomotive that ran on Australia's Victorian Railways (VR).

<span class="mw-page-title-main">Victorian Railways F class (1874)</span>

The Victorian Railways F class was originally a class of 2-4-0 light line passenger locomotives operated by the Victorian Railways between 1874 and 1929.

<span class="mw-page-title-main">Victorian Railways T class (1874)</span>

The 23 Victorian Railways T class locomotives were built from 1874 as a light lines goods engine.

The Victorian Railways X class was a class of 0-6-0 mainline goods locomotives operated by the Victorian Railways between 1886 and 1920.

The Victorian Railways H class was a class of 4-4-0 light line passenger locomotives operated by the Victorian Railways between 1877 and 1916.

<span class="mw-page-title-main">Victorian Railways D class (1887)</span>

The D class of 1887 were Phoenix-built locomotives to be used on Victorian Railways.

The D class of 1876 was the first example of American-built locomotives to be used on Victorian Railways, and among the first such engines to operate in Australia.

Victorian Railways No.1 was the first government passenger steam locomotive on Victorian Railways(VR). It was a 2-2-2 tender locomotive built in 1857 by George England & Co. with their builders number 146. It arrived at Port Phillip in September 1858 along with 4 goods locomotives of 0-6-0 tender configuration.

The Victorian Railways J class was a class of 2-2-2 main line passenger locomotives manufactured by Beyer, Peacock & Company, Manchester, England for the Victorian Railways.

The Victorian Railways P class was a class of 0-6-0 goods locomotives operated by the Victorian Railways between 1860 and 1921.

The Victorian Railways L class was a class of 2-4-0ST passenger locomotives operated by the Victorian Railways between 1861 and 1906.

The Geelong & Melbourne Railway Company operated a total of 1 locomotive that fell under the Whyte notation of 0-4-0T, with a Vertical boiler, between 1855 and 1860. Later it was operated by the Victorian Railways between 1860 and 1893. This was the second locomotive manufactured in Australia.

The Geelong and Melbourne Railway Company operated a total of four 2-2-2WT locomotives between 1856 and 1860. They were later operated by the Victorian Railways between 1860 and 1889.

References

Specific

  1. 1 2 3 Victorian Railways Rolling Stock Branch: Diagrams & Particulars of Locomotives, Cars, Vans & Trucks (1904 ed.). Vic: Victorian Railways. 1904. p. 3.
  2. 1 2 3 4 5 6 7 Cave, Buckland & Beardsell 2002