Victorian Railways J class (1859)

Last updated

Victorian Railways J class
Type and origin
Power typeSteam
DesignerMeikle
Builder Beyer, Peacock & Company, Manchester, England
Serial number110-114
Build date1859
Total produced5
Rebuilder1872
Specifications
Configuration:
   Whyte 2-2-2 , Rebuilt 1872: 2-4-0
Gauge 5 ft 3 in (1,600 mm)
Leading dia. 1894 diagram:3 ft 1+12 in (952 mm) [1]
Driver dia.1894 diagram: 5 ft 0 in (1,520 mm) [1]
Wheelbase 31 ft 4+12 in (9.563 m), [2] 1894 diagram:33 ft 5+58 in (10.201 m), [1] 1904 diagram:31 ft 11+12 in (9.741 m) [3]
  Coupled1894 diagram: 7 ft 0 in (2.13 m) [2]
Length1894 diagram:42 ft 0+18 in (12.805 m), [1] 1904 diagram: 40 ft 4 in (12.29 m) [3]
Height13 ft 0 in (3.96 m) [1]
Axle load 1894 diagram: 10  long tons  1 cwt (22,500 lb or 10.2 t) [2]
Loco weight1894 diagram: 27  long tons  3 cwt (60,800 lb or 27.6 t), [2] 1904 diagram: 27  long tons  10 cwt (61,600 lb or 27.9 t) [3]
Tender weight1894 diagram: 23  long tons  6 cwt (52,200 lb or 23.7 t), [2] 1904 diagram: 17  long tons  11 cwt (39,300 lb or 17.8 t) [3]
Total weight1894 diagram: 50  long tons  9 cwt (113,000 lb or 51.3 t), [2] 1904 diagram: 45  long tons  1 cwt (100,900 lb or 45.8 t) [3]
Fuel typeCoal
Fuel capacity60  long cwt (6,700 lb or 3,000 kg) [2]
Water cap.21,710 imp gal (98,700 L; 26,070 US gal), [2] 1904 diagram: 1,220 imp gal (5,500 L; 1,470 US gal) [3]
Firebox:
  Grate area13.0 sq ft (1.21 m2) [2]
Heating surface:
  Firebox1894 diagram: 77.22 sq ft (7.174 m2) [2]
  Tubes1894 diagram: 937.92 sq ft (87.136 m2) [2]
  Total surface1894 diagram: 1,015.14 sq ft (94 m2) [2]
Cylinders 2, inside
Cylinder size 14 in × 21 in (356 mm × 533 mm), [2] 1894 diagram: 15 in × 22 in (381 mm × 559 mm) [2]
Performance figures
Tractive effort 1894 diagram: 1,710  lbf (7.6  kN) at 100 psi, [2] 1904 diagram: 8,580  lbf (38.2  kN) at 100 psi [3]
Career
Operators Victorian Railways
Number in class5
Numbers2-6, Later 2-10 (even only)
First runMay 1860
WithdrawnFebruary 1916
DispositionAll scrapped

The Victorian Railways J class was a class of 2-2-2 main line passenger locomotives manufactured by Beyer, Peacock & Company, Manchester, England for the Victorian Railways.

Contents

History

Originally numbered 2-6 under the first system of consecutive numbering system which duplicated numbers in each type (passenger / goods) locomotives.

Not long after, the VR changed to the odd/even system, odd for goods, even for passenger. These locomotives were renumbered 2-10 (even only). Classed 'J' in 1886.


Fleet summary

Key:In servicePreservedStored or withdrawnScrapped
First nos.LocomotiveBuilder no.Entered serviceWithdrawnScrappedStatusNotes
2J 2110May 186023 April 1904Scrapped
4J 4112July 18609 November 1912ScrappedSold to Mr Findlay of Serviceton - 9 November 1912
6J 6114August 186010 August 1912ScrappedHot water engine - 10 August 1912. Broken up? - 19 February 1916. Last seen - 9 March 1917
3J 8111June 18605 July 1904Scrapped
5J 10113July 186028 April 1907ScrappedStationary engine at Newport - 29 April 1907

Related Research Articles

<span class="mw-page-title-main">Wonthaggi railway line</span> Former railway line in Victoria, Australia

The Wonthaggi railway line is a closed railway line located in South Gippsland, Victoria, Australia. Its primary purpose was to serve the State Coal Mine but the line also provided passenger and general goods services. The line was opened in 1910 and closed in 1978.

<span class="mw-page-title-main">Victorian Railways J class (1954)</span>

The Victorian Railways J class was a branch line steam locomotive operated by the Victorian Railways (VR) between 1954 and 1972. A development of the successful Victorian Railways K class 2-8-0, it was the last new class of steam locomotive introduced on the VR. Introduced almost concurrently with the diesel-electric locomotives that ultimately superseded them, the locomotives were only in service for a relatively short time.

The Phoenix Foundry was a company that built steam locomotives and other industrial machinery in the city of Ballarat, Victoria, Australia. Over 30 years they built 352 locomotives for the Victorian Railways, of 38 different designs.

<span class="mw-page-title-main">Victorian Railways B class</span>

The mainline passenger locomotives, later classified as B class, ran on the Victorian Railways (VR) between 1862 and 1917. They used a 2-4-0 wheel arrangement, which provided greater traction on the new, more heavily graded Geelong–Ballarat railway and the Melbourne-Bendigo-Echuca railway, as opposed to the 2-2-2 arrangement previously selected for the relatively level Geelong line. The B class locomotives are regarded as the first mainline VR motive power, and were highly successful in passenger operations.

<span class="mw-page-title-main">Victorian Railways M class</span>

The Victorian Railways M class were 4-4-0T (tank) steam locomotives for suburban passenger service in Melbourne, a pattern engine being supplied in 1879 by Beyer, Peacock & Co. Twenty-one further locomotives of this model were built by the Phoenix Foundry of Ballarat, in three batches, from 1884 to 1886. They were numbered 40, 210-240, and 312-320, and were classed M in 1886.

Victorian Railways 'Old' V class were the first government goods steam locomotives on Victorian Railways, built by George England & Co. The four 0-6-0 tender locomotives were built in 1857–8 with builder's numbers 142–145. They arrived in Port Phillip in September 1858 along with 2-2-2 passenger locomotive No. 1.

<span class="mw-page-title-main">Victorian Railways E class</span>

The E class was a class of suburban tank steam locomotive that ran on Australia's Victorian Railways (VR).

<span class="mw-page-title-main">Victorian Railways F class (1874)</span>

The Victorian Railways F class was originally a class of 2-4-0 light line passenger locomotives operated by the Victorian Railways between 1874 and 1929.

<span class="mw-page-title-main">Victorian Railways T class (1874)</span>

The 23 Victorian Railways T class locomotives were built from 1874 as a light lines goods engine.

The Victorian Railways X class was a class of 0-6-0 mainline goods locomotives operated by the Victorian Railways between 1886 and 1920.

The Victorian Railways G class was a class of 4-4-0 light line passenger locomotives operated by the Victorian Railways between 1877 and 1904.

The Victorian Railways H class was a class of 4-4-0 light line passenger locomotives operated by the Victorian Railways between 1877 and 1916.

<span class="mw-page-title-main">Victorian Railways D class (1887)</span>

The D class of 1887 were Phoenix-built locomotives to be used on Victorian Railways.

The D class of 1876 was the first example of American-built locomotives to be used on Victorian Railways, and among the first such engines to operate in Australia.

Victorian Railways No.1 was the first government passenger steam locomotive on Victorian Railways(VR). It was a 2-2-2 tender locomotive built in 1857 by George England & Co. with their builders number 146. It arrived at Port Phillip in September 1858 along with 4 goods locomotives of 0-6-0 tender configuration.

The Victorian Railways P class was a class of 0-6-0 goods locomotives operated by the Victorian Railways between 1860 and 1921.

The Victorian Railways L class was a class of 2-4-0ST passenger locomotives operated by the Victorian Railways between 1861 and 1906.

The Geelong & Melbourne Railway Company operated a total of 1 locomotive that fell under the Whyte notation of 0-4-0T, with a Vertical boiler, between 1855 and 1860. Later it was operated by the Victorian Railways between 1860 and 1893. This was the second locomotive manufactured in Australia.

The Geelong and Melbourne Railway Company operated a total of four 2-2-2WT locomotives between 1856 and 1860. They were later operated by the Victorian Railways between 1860 and 1889.

References

Specific

  1. 1 2 3 4 5 Victorian Railways Rolling Stock Branch: Diagrams & Particulars of Locomotives, Cars, Vans & Trucks (1894 ed.). Vic: Victorian Railways. 1894.
  2. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Cave, Norman; Buckland, John; Beardsell, David (2002). Steam Locomotives of the Victorian Railways. Vol. 1: The First Fifty Years. Melbourne, Vic: ARHS Victoria Division. p. 35. ISBN   1876677384.
  3. 1 2 3 4 5 6 7 Victorian Railways Rolling Stock Branch: Diagrams & Particulars of Locomotives, Cars, Vans & Trucks (1904 ed.). Vic: Victorian Railways. 1904. p. 4.