Baire category theorem

Last updated

The Baire category theorem (BCT) is an important result in general topology and functional analysis. The theorem has two forms, each of which gives sufficient conditions for a topological space to be a Baire space (a topological space such that the intersection of countably many dense open sets is still dense). It is used in the proof of results in many areas of analysis and geometry, including some of the fundamental theorems of functional analysis.

Contents

Versions of the Baire category theorem were first proved independently in 1897 by Osgood for the real line and in 1899 by Baire [1] for Euclidean space . [2] The more general statement for completely metrizable spaces was first shown by Hausdorff [3] in 1914.

Statement

A Baire space is a topological space in which every countable intersection of open dense sets is dense in See the corresponding article for a list of equivalent characterizations, as some are more useful than others depending on the application.

Neither of these statements directly implies the other, since there are complete metric spaces that are not locally compact (the irrational numbers with the metric defined below; also, any Banach space of infinite dimension), and there are locally compact Hausdorff spaces that are not metrizable (for instance, any uncountable product of non-trivial compact Hausdorff spaces is such; also, several function spaces used in functional analysis; the uncountable Fort space). See Steen and Seebach in the references below.

Relation to the axiom of choice

The proof of BCT1 for arbitrary complete metric spaces requires some form of the axiom of choice; and in fact BCT1 is equivalent over ZF to the axiom of dependent choice, a weak form of the axiom of choice. [9]

A restricted form of the Baire category theorem, in which the complete metric space is also assumed to be separable, is provable in ZF with no additional choice principles. [10] This restricted form applies in particular to the real line, the Baire space the Cantor space and a separable Hilbert space such as the -space .

Uses

BCT1 is used in functional analysis to prove the open mapping theorem, the closed graph theorem and the uniform boundedness principle.

BCT1 also shows that every nonempty complete metric space with no isolated point is uncountable. (If is a nonempty countable metric space with no isolated point, then each singleton in is nowhere dense, and is meagre in itself.) In particular, this proves that the set of all real numbers is uncountable.

BCT1 shows that each of the following is a Baire space:

By BCT2, every finite-dimensional Hausdorff manifold is a Baire space, since it is locally compact and Hausdorff. This is so even for non-paracompact (hence nonmetrizable) manifolds such as the long line.

BCT is used to prove Hartogs's theorem, a fundamental result in the theory of several complex variables.

BCT1 is used to prove that a Banach space cannot have countably infinite dimension.

Proof

(BCT1) The following is a standard proof that a complete pseudometric space is a Baire space. [6]

Let be a countable collection of open dense subsets. It remains to show that the intersection is dense. A subset is dense if and only if every nonempty open subset intersects it. Thus to show that the intersection is dense, it suffices to show that any nonempty open subset of has some point in common with all of the . Because is dense, intersects consequently, there exists a point and a number such that:

where and denote an open and closed ball, respectively, centered at with radius Since each is dense, this construction can be continued recursively to find a pair of sequences and such that:

(This step relies on the axiom of choice and the fact that a finite intersection of open sets is open and hence an open ball can be found inside it centered at .) The sequence is Cauchy because whenever and hence converges to some limit by completeness. If is a positive integer then (because this set is closed). Thus and for all

There is an alternative proof using Choquet's game. [11]

(BCT2) The proof that a locally compact regular space is a Baire space is similar. [7] It uses the facts that (1) in such a space every point has a local base of closed compact neighborhoods; and (2) in a compact space any collection of closed sets with the finite intersection property has nonempty intersection. The result for locally compact Hausdorff spaces is a special case, as such spaces are regular.

Notes

  1. Baire, R. (1899). "Sur les fonctions de variables réelles". Ann. Di Mat. 3: 1–123.
  2. Bourbaki 1989, Historical Note, p. 272.
  3. Engelking 1989, Historical and bibliographic notes to section 4.3, p. 277.
  4. 1 2 Kelley 1975, theorem 34, p. 200.
  5. Narici & Beckenstein 2011, Theorem 11.7.2, p. 393.
  6. 1 2 Schechter 1996, Theorem 20.16, p. 537.
  7. 1 2 Schechter 1996, Theorem 20.18, p. 538.
  8. Narici & Beckenstein 2011, Theorem 11.7.3, p. 394.
  9. Blair, Charles E. (1977). "The Baire category theorem implies the principle of dependent choices". Bull. Acad. Polon. Sci. Sér. Sci. Math. Astron. Phys. 25 (10): 933–934.
  10. Levy 2002, p. 212.
  11. Baker, Matt (July 7, 2014). "Real Numbers and Infinite Games, Part II: The Choquet game and the Baire Category Theorem".

Related Research Articles

<span class="mw-page-title-main">Compact space</span> Type of mathematical space

In mathematics, specifically general topology, compactness is a property that seeks to generalize the notion of a closed and bounded subset of Euclidean space. The idea is that a compact space has no "punctures" or "missing endpoints", i.e., it includes all limiting values of points. For example, the open interval (0,1) would not be compact because it excludes the limiting values of 0 and 1, whereas the closed interval [0,1] would be compact. Similarly, the space of rational numbers is not compact, because it has infinitely many "punctures" corresponding to the irrational numbers, and the space of real numbers is not compact either, because it excludes the two limiting values and . However, the extended real number linewould be compact, since it contains both infinities. There are many ways to make this heuristic notion precise. These ways usually agree in a metric space, but may not be equivalent in other topological spaces.

In topology and related areas of mathematics, a metrizable space is a topological space that is homeomorphic to a metric space. That is, a topological space is said to be metrizable if there is a metric such that the topology induced by is Metrization theorems are theorems that give sufficient conditions for a topological space to be metrizable.

In mathematics, a topological space is called separable if it contains a countable, dense subset; that is, there exists a sequence of elements of the space such that every nonempty open subset of the space contains at least one element of the sequence.

This is a glossary of some terms used in the branch of mathematics known as topology. Although there is no absolute distinction between different areas of topology, the focus here is on general topology. The following definitions are also fundamental to algebraic topology, differential topology and geometric topology.

In mathematics, a topological vector space is one of the basic structures investigated in functional analysis. A topological vector space is a vector space that is also a topological space with the property that the vector space operations are also continuous functions. Such a topology is called a vector topology and every topological vector space has a uniform topological structure, allowing a notion of uniform convergence and completeness. Some authors also require that the space is a Hausdorff space. One of the most widely studied categories of TVSs are locally convex topological vector spaces. This article focuses on TVSs that are not necessarily locally convex. Banach spaces, Hilbert spaces and Sobolev spaces are other well-known examples of TVSs.

In the mathematical discipline of general topology, Stone–Čech compactification is a technique for constructing a universal map from a topological space X to a compact Hausdorff space βX. The Stone–Čech compactification βX of a topological space X is the largest, most general compact Hausdorff space "generated" by X, in the sense that any continuous map from X to a compact Hausdorff space factors through βX. If X is a Tychonoff space then the map from X to its image in βX is a homeomorphism, so X can be thought of as a (dense) subspace of βX; every other compact Hausdorff space that densely contains X is a quotient of βX. For general topological spaces X, the map from X to βX need not be injective.

In mathematics, Tychonoff's theorem states that the product of any collection of compact topological spaces is compact with respect to the product topology. The theorem is named after Andrey Nikolayevich Tikhonov, who proved it first in 1930 for powers of the closed unit interval and in 1935 stated the full theorem along with the remark that its proof was the same as for the special case. The earliest known published proof is contained in a 1935 article by Tychonoff, "Über einen Funktionenraum".

<span class="mw-page-title-main">General topology</span> Branch of topology

In mathematics, general topology is the branch of topology that deals with the basic set-theoretic definitions and constructions used in topology. It is the foundation of most other branches of topology, including differential topology, geometric topology, and algebraic topology.

In mathematics, a topological space is said to be a Baire space if countable unions of closed sets with empty interior also have empty interior. According to the Baire category theorem, compact Hausdorff spaces and complete metric spaces are examples of Baire spaces. The Baire category theorem combined with the properties of Baire spaces has numerous applications in topology, geometry, and analysis, in particular functional analysis. For more motivation and applications, see the article Baire category theorem. The current article focuses more on characterizations and basic properties of Baire spaces per se.

In the mathematical field of general topology, a meagre set is a subset of a topological space that is small or negligible in a precise sense detailed below. A set that is not meagre is called nonmeagre, or of the second category. See below for definitions of other related terms.

In functional analysis and related areas of mathematics, Fréchet spaces, named after Maurice Fréchet, are special topological vector spaces. They are generalizations of Banach spaces. All Banach and Hilbert spaces are Fréchet spaces. Spaces of infinitely differentiable functions are typical examples of Fréchet spaces, many of which are typically not Banach spaces.

In the mathematical field of topology, a Gδ set is a subset of a topological space that is a countable intersection of open sets. The notation originated from the German nouns Gebiet'open set' and Durchschnitt'intersection'. Historically Gδ sets were also called inner limiting sets, but that terminology is not in use anymore. Gδ sets, and their dual, F𝜎 sets, are the second level of the Borel hierarchy.

In general topology, a branch of mathematics, a non-empty family A of subsets of a set is said to have the finite intersection property (FIP) if the intersection over any finite subcollection of is non-empty. It has the strong finite intersection property (SFIP) if the intersection over any finite subcollection of is infinite. Sets with the finite intersection property are also called centered systems and filter subbases.

In the mathematical discipline of general topology, a Polish space is a separable completely metrizable topological space; that is, a space homeomorphic to a complete metric space that has a countable dense subset. Polish spaces are so named because they were first extensively studied by Polish topologists and logicians—Sierpiński, Kuratowski, Tarski and others. However, Polish spaces are mostly studied today because they are the primary setting for descriptive set theory, including the study of Borel equivalence relations. Polish spaces are also a convenient setting for more advanced measure theory, in particular in probability theory.

In functional analysis and related areas of mathematics, locally convex topological vector spaces (LCTVS) or locally convex spaces are examples of topological vector spaces (TVS) that generalize normed spaces. They can be defined as topological vector spaces whose topology is generated by translations of balanced, absorbent, convex sets. Alternatively they can be defined as a vector space with a family of seminorms, and a topology can be defined in terms of that family. Although in general such spaces are not necessarily normable, the existence of a convex local base for the zero vector is strong enough for the Hahn–Banach theorem to hold, yielding a sufficiently rich theory of continuous linear functionals.

In topology, a second-countable space, also called a completely separable space, is a topological space whose topology has a countable base. More explicitly, a topological space is second-countable if there exists some countable collection of open subsets of such that any open subset of can be written as a union of elements of some subfamily of . A second-countable space is said to satisfy the second axiom of countability. Like other countability axioms, the property of being second-countable restricts the number of open sets that a space can have.

In functional analysis and related areas of mathematics, a barrelled space is a topological vector space (TVS) for which every barrelled set in the space is a neighbourhood for the zero vector. A barrelled set or a barrel in a topological vector space is a set that is convex, balanced, absorbing, and closed. Barrelled spaces are studied because a form of the Banach–Steinhaus theorem still holds for them. Barrelled spaces were introduced by Bourbaki (1950).

In topology and related areas of mathematics, a subset A of a topological space X is said to be dense in X if every point of X either belongs to A or else is arbitrarily "close" to a member of A — for instance, the rational numbers are a dense subset of the real numbers because every real number either is a rational number or has a rational number arbitrarily close to it. Formally, is dense in if the smallest closed subset of containing is itself.

In mathematics, particularly in functional analysis, a webbed space is a topological vector space designed with the goal of allowing the results of the open mapping theorem and the closed graph theorem to hold for a wider class of linear maps whose codomains are webbed spaces. A space is called webbed if there exists a collection of sets, called a web that satisfies certain properties. Webs were first investigated by de Wilde.

In functional analysis and related areas of mathematics, a metrizable topological vector space (TVS) is a TVS whose topology is induced by a metric. An LM-space is an inductive limit of a sequence of locally convex metrizable TVS.

References