8 cm PAW 600

Last updated
8 cm Panzerabwehrwerfer 600
PAW600 8cm 1.jpg
PAW 600 at Aberdeen military proving grounds
Type Anti-tank gun
Place of origin Nazi Germany
Service history
Used byNazi Germany
Wars World War II
Production history
Designer Rheinmetall
Designed1943–1944
ProducedDecember 1944–March 1945
No. built260
Specifications
Mass640 kg (1,410 lb)
Barrel  length2.95 m (9 ft 8 in)
Crew6

Caliber 81.4 mm (3.20 in)
Breech vertical sliding-block
Recoil Hydro-pneumatic
Carriage Split trail
Elevation -6° to +32°
Traverse 55°
Muzzle velocity 520 m/s (1,706 ft/s)
Effective firing range750 m (820 yd) (anti-tank)
Maximum firing range6,200 m (6,800 yd) (high explosive)

The PAW 600 (Panzerabwehrwerfer 600, officially designated 8H63) was a lightweight anti-tank gun that used the high-low pressure system to fire hollow charge warheads. In 1945, it was used operationally by the Wehrmacht in small numbers. Only about 260 were produced before the war's end.

Contents

Background

By 1943, the German army was faced with various problems concerning their existing anti-tank gun designs. They had started the war with the 3.7 cm PaK 36, which had the advantage of being very light at 328 kg, so that it could be moved a reasonable distance by hand using only its own crew. By 1941, this gun was inadequate; it could not deal with the heaviest armoured Soviet and British tanks. Its replacement, the 5 cm PaK 38, offered better performance (though still only marginal against the new threat) but, at 1,000 kg, was at the absolute limit of what the gun's own crew could effectively move into and out of a firing position by hand. The next gun, the 7.5 cm PaK 40, was a very effective tank-killer; but, at 1,425 kg, was no longer suitable for use by the infantry. A much larger crew and a vehicle was required to move this gun any distance at all and often just to displace it out of its firing position. Many were lost intact simply because they were overrun before their crews could move them. As the guns got bigger to deal with the latest tank technology, they became too heavy for tactical employment and more expensive. The PAK 36 cost RM 5,730 and took 900 work-hours to build, while a PAK 40 cost RM 12,000 and took 2,000 work-hours to build. The situation was so bad that, by May 1944, the 14th (Panzerjager) Kompanie of infantry regiments were having their heavy anti-tank guns removed and replaced by the Panzerschreck rocket launcher. But with an effective range of only 150 meters, this weapon did not provide the depth of fire required for the regiment's anti-tank defense. The only other alternative for a light anti-tank gun had been a recoilless weapon, but the German Army was less than enthusiastic because this type of weapon had many shortcomings, particularly its high demand for propellant.

Design and development

In 1943, a specification was issued for a lightweight anti-tank gun that used less propellant than a rocket or recoilless weapon, yet was sufficiently accurate to hit a 1-meter square target at a range of 750 meters. Rheinmetall-Borsig proposed a design to meet this requirement using the new high-low pressure ballistic principle, also known as the Hoch-Niederdruck system. In this system, high pressure caused by the combustion of the propellant was confined to the breech section, which was relatively heavy, and did not act directly on the projectile. The pressure was allowed to bleed gradually into the barrel at a controlled rate and lower pressure to propel the projectile. Thus the barrel could be exceptionally light for a weapon that still had the advantages that accrue from a high pressure gun. The carriage too could be very light, although the initial prototype carriages proved to be too light and had to be redesigned. The resulting PAW 600 (later redesignated 8H63) gun weighed about 600 kg, less than half that of the 7.5 cm PaK 40, while having comparable armor penetration out to its full effective anti-tank range of 750 meters.

Unlike previous anti-tank guns, which relied on firing steel projectiles at high velocities to penetrate heavy armor, the 8H63 was designed to fire shaped charge ammunition (also called hollow-charge ammunition, high explosive anti-tank, or HEAT). Because shaped charge warheads perform best when no spin is imparted on the projectile, the 8H63 was a smoothbore design. To simplify development and manufacture, the projectiles used were based on the widely used 8 cm Granatwerfer 34 mortar (actual caliber 81.4 mm). This allowed the use of existing tooling in the manufacture of the ammunition, which reduced the costs. The cartridge case was developed from the 10.5 cm leFH 18 howitzer.

The standard shaped charge projectile, which was designated 8 cm W Gr Patr H1 4462, weighed 2.70 kg. The propelling charge was 360 g of Digl B1 P (compared to a 500 g propelling charge for a Gr 38 Hl/B fired from a PAK 40), which produced a muzzle velocity of 520 mps and provided an effective range of 750 meters against a 1m² target. Armor penetration was 140mm of vertical armor, which was comparable to the 7.5 cm PAK 40 firing the rare and expensive tungsten-cored PzGr40 shot.

Other uses and rounds

Because the ammunition was developed from the standard infantry mortar, any type of round developed for the mortar could have been readily adapted for the 8H63, including high-explosive (HE), smoke and illuminating rounds. The HE round, the 8 cm W Gr Patr 5071 with a 4.46 kg projectile and total round weight of 8.30 kg was developed. This could employ three different charge increments for maximum ranges of 3,400 meters @ 220 mps, 5,600 meters @ 320 mps or 6,200 meters at 420 mps - about three times the range of the mortar and with the possibility of direct or indirect fire. This performance brings up another interesting feature of this gun. Traditional high-velocity anti-tank guns were very inefficient when employed as field artillery firing explosive rounds in support of the infantry. The thick projectile walls necessary to withstand high velocities ensured a small explosive payload and the amount of propellent used was wasteful. The guns also fired at low trajectories (+22 degrees for a PAK 40), which limited their utility. For this reason, the German Army had always employed Infantry Guns, such as the 7.5 cm leichtes Infanteriegeschütz 18, at the regimental level to provide fire support under the direct and immediate control of the infantry. This meant that every infantry regiment had an infantry gun company for use against unarmored targets and a tank destroyer (anti-tank gun) company for use against armored targets. A 8H63 firing an explosive round had a lethality almost comparable to the 7.5 cm infantry gun and had a greater range. The 8H63's multi-charge cartridge, 55 degree traverse (fine for anti-tank defence) and +32 degree maximum elevation could have allowed the merger of the infantry and anti-tank gun categories with resulting savings in production, logistics, and precious manpower. The 8H63 was to be organized under the new 1945 Table of Organization and Equipment (TO&E) in anti-tank companies of 12 guns with 104 men, replacing the anti-tank and infantry gun companies (300+ men) of previous organizations.

Production

Some 260 guns and 34,800 rounds of ammunition were completed from December 1944, with 81 guns delivered to the troops in January 1945 and 155 listed on 1 March 1945. Plans had called for the production of 1,000 guns, 4,000,000 anti-tank and 800,000 explosive shells per month. Production models were fitted with PAK 40 muzzle brakes and had either the purpose-built light carriage or used redundant PAK 38 carriages, which were slightly heavier.

Further development perspectives

Several self-propelled models were proposed in 1945, but the war ended before even prototypes could be built. It is clear that, had the war in Europe carried on longer, the 8H63 would have been a major factor and would likely have complemented the towed PAK 40 and replaced various 7.5 cm infantry guns in production.

Krupp was also developing an enlarged 10 cm design, known as the 10 cm PAW 1000 or 10H64, towards the end of the war, but it didn't reach the production stage. This would have had an armor penetration increased to 200 mm, with the effective range against tanks increased to 1,000 meters all in a gun weighing about 1,000 kg.

Use in combat

The weapon was used near the River Aller on 14 April 1945, as described in the following account by the official history of 15th/19th The King's Royal Hussars by Major G Courage 15/19H, who was with the regiment on the day.

"The enemy resistance had been determined and tough, only equalled by that met in the Rhineland fighting. The Marines had used their SA weapons and bazookas with skill and they had been well backed up by the large number of guns sited in support of them. Their 88-mm guns were well sited and difficult to spot in the thick country which was admirably suited to defence. The one which had given the most trouble was afterwards found to be well dug in and almost impossible of detection from the A or C Squadron positions. We found too that the first guns which had been met were 75-mm bored out to 80-mm and firing a hollow charge projectile through a smooth bore.

This was a new weapon and, although it was not thought to be effective over about five hundred yards, it was an interesting example of German improvisation."

Nomenclature

The Panzerabwehrwerfer 600 ("anti-tank thrower") designation was used by Rheinmetall during the design phase. The service designation was 8H63 in accordance to the new designation system used during the last year of the war.

In 1944–5, the Germans changed their system of artillery designations from the old "year" system. Each weapon was to have a number showing their caliber group, a letter denoting the ammunition group, and the last two digits were from the weapon drawing number. In this case, 8H denoted an 81.4 mm caliber weapon using the H group of ammunition. The shells were all to be designated as H with a four digit number, the first three were the drawing number and the last was the shell's category from the following list:

#Shell type#Shell type
1 high explosive 6gas
2 hollow charge anti-tank7incendiary
3 armor-piercing 8leaflet
4high explosive, high capacity9practice
5smoke10proof projectile
PAW 600 PAW600 8cm 2.jpg
PAW 600

In museums

Coastal Defence Museum in Świnoujście (Poland) - one of three remaining PAW 600 in the world. [1] Aberdeen Proving ground in Maryland, USA.

Related Research Articles

<span class="mw-page-title-main">Armour-piercing ammunition</span> Ammunition type designed to penetrate armour

Armour-piercing ammunition (AP) is a type of projectile designed to penetrate armour protection, most often including naval armour, body armour, vehicle armour.

<span class="mw-page-title-main">8.8 cm KwK 36</span> 88 mm tank gun used by the German Army during World War II

The 8.8 cm KwK 36 was an 88-millimetre (3.5 in) tank gun used by the German Army during World War II. This was the primary armament of the PzKpfw VI Tiger I tank. It was developed and built by Krupp.

<span class="mw-page-title-main">8.8 cm KwK 43</span> German tank gun

The 8.8 cm KwK 43 was an 88 mm 71 calibre length tank gun designed by Krupp and used by the German Wehrmacht during the Second World War. It was mounted as the primary armament on the Panzerkampfwagen VI Ausf. B Tiger II. The 8.8 cm Pak 43, an anti-tank gun, was very similar in design but mounted on tank destroyers or deployed stand-alone on the field.

<span class="mw-page-title-main">High-explosive anti-tank</span> Type of shaped charge explosive

High-explosive anti-tank (HEAT) is the effect of a shaped charge explosive that uses the Munroe effect to penetrate heavy armor. The warhead functions by having an explosive charge collapse a metal liner inside the warhead into a high-velocity shaped charge jet; this is capable of penetrating armor steel to a depth of seven or more times the diameter of the charge. The shaped charge jet armor penetration effect is purely kinetic in nature; the round has no explosive or incendiary effect on the armor.

<i>Panzerfaust</i> German man-portable anti-tank recoilless weapons, WW2

The Panzerfaust was a development family of single-shot man-portable anti-tank systems developed by Nazi Germany during World War II. The weapons were the first single-use light anti-tank weapons based on a pre-loaded disposable launch tube, a weapon configuration which is still used today.

<span class="mw-page-title-main">Anti-tank warfare</span> Science and Technology tactics based around countering and immobilizing tanks

Anti-tank warfare originated from the need to develop technology and tactics to destroy tanks during World War I. Since the Allies deployed the first tanks in 1916, the German Empire developed the first anti-tank weapons. The first developed anti-tank weapon was a scaled-up bolt-action rifle, the Mauser 1918 T-Gewehr, that fired a 13.2 mm cartridge with a solid bullet that could penetrate the thin armor of tanks at that time and destroy the engine or ricochet inside, killing occupants. Because tanks represent an enemy's strong force projection on land, military strategists have incorporated anti-tank warfare into the doctrine of nearly every combat service since. The most predominant anti-tank weapons at the start of World War II in 1939 included the tank-mounted gun, anti-tank guns and anti-tank grenades used by the infantry, and ground-attack aircraft.

<span class="mw-page-title-main">Anti-tank gun</span> Form of artillery designed to destroy tanks and other armored fighting vehicles

An anti-tank gun is a form of artillery designed to destroy tanks and other armoured fighting vehicles, normally from a static defensive position. The development of specialized anti-tank munitions and anti-tank guns was prompted by the appearance of tanks during World War I. To destroy hostile tanks, artillerymen often used field guns depressed to fire directly at their targets, but this practice expended too much valuable ammunition and was of increasingly limited effectiveness as tank armor became thicker. The first dedicated anti-tank artillery began appearing in the 1920s, and by World War II was a common appearance in many European armies. To penetrate armor, they fired specialized ammunition from longer barrels to achieve a higher muzzle velocity than field guns. Most anti-tank guns were developed in the 1930s as improvements in tanks were noted, and nearly every major arms manufacturer produced one type or another.

<span class="mw-page-title-main">7.5 cm Pak 40</span> Anti-tank gun

The 7.5 cm Pak 40 was a German 75 millimetre anti-tank gun of the Second World War.

<span class="mw-page-title-main">3.7 cm Pak 36</span> German anti-tank gun

The Pak 36 is a 3.7 cm / 37mm caliber German anti-tank gun used during the Second World War. It was the main anti-tank weapon of Wehrmacht Panzerjäger units until 1942. Developed by Rheinmetall in 1933, it was first issued to the German Army in 1936, with 9,120 being available by the beginning of the war in September 1939 and a further 5,339 produced during the war. As the predominant anti-tank gun design in the world during the late 1930s, demand was high for the Pak 36, with another 6,000 examples produced for export and the design being copied by the Soviet Union as the 45 mm anti-tank gun M1932 (19-K) and by other nations such as Japan.

<span class="mw-page-title-main">7.5 cm KwK 42</span> German tank gun

The 7.5 cm KwK 42 L/70 was a 7.5 cm calibre German tank gun used on German armoured fighting vehicles in the Second World War. The gun was the armament of the Panther medium tank and two variants of the Jagdpanzer IV self-propelled anti-tank gun. On the latter it was designated as the "7.5 cm Panzerabwehrkanone 42" anti-tank gun.

<span class="mw-page-title-main">8.8 cm Pak 43</span> Anti-tank gun

The Pak 43 was a German 88 mm anti-tank gun developed by Krupp in competition with the Rheinmetall 8.8 cm Flak 41 anti-aircraft gun and used during World War II. The Pak 43 was the most powerful anti-tank gun of the Wehrmacht to see service in significant numbers, also serving in modified form as the 8.8 cm KwK 43 main gun on the Tiger II tank, the open-top Nashorn and fully enclosed, casemate-hulled Elefant and Jagdpanther tank destroyers.

<span class="mw-page-title-main">7.5 cm KwK 40</span> German tank gun and anti-tank gun

The 7.5 cm KwK 40 was a German 75 mm Second World War era vehicle-mounted gun, used as the primary armament of the German Panzer IV medium tank and the Sturmgeschütz III and Sturmgeschütz IV assault guns which were used as tank destroyers.

<span class="mw-page-title-main">7.5 cm Pak 97/38</span> Anti-tank gun

The Pak 97/38 was a German anti-tank gun used by the Wehrmacht in World War II. The gun was a combination of the barrel from the French Canon de 75 modèle 1897 fitted with a Swiss Solothurn muzzle brake and mounted on the carriage of the German 5 cm Pak 38 and could fire captured French and Polish ammunition.

<span class="mw-page-title-main">12.8 cm Pak 44</span> German anti-tank gun

The 12.8 cm Pak 44 was a German anti-tank gun used during World War II. It was designed as a result of experiences on the Eastern front in 1943. The German Army came upon the Soviet 122 mm field guns and issued a requirement for a similar weapon. Development initially concentrated on a field gun known as the Kanone K 44. However, once heavier Soviet tanks such as the IS-2 started to appear, the design requirements were altered to include an anti-armour role.

<span class="mw-page-title-main">7.5 cm Pak 41</span> Anti-tank gun

The 7.5 cm Pak 41 was one of the last German anti-tank guns brought into service and used in World War II and notable for being one of the largest anti-tank guns to rely on the Gerlich principle to deliver a higher muzzle velocity and therefore greater penetration in relation to its size.

The 10 cm PAW 1000 - later re-designated 10H64 - was a lightweight anti-tank gun that utilized a high-low pressure system to fire hollow charge warheads.

Panzerabwehrkanone, usually referred to with the acronym Pak, is the German language term for anti-tank gun. Before and during World War II, the German Army produced a series of 13 anti-tank guns which they designated Panzerabwehrkanone, i.e. Pak. In addition they produced one weapon they designated an anti-tank rifle, which is generally considered to actually be an anti-tank gun; and one gun they designated Panzerabwehrwerfer, PAW, the anti-tank launcher.

The high–low system is a design of cannon and anti-tank warfare launcher using a smaller high-pressure chamber to store propellant. It allows a much larger projectile to be launched without the heavy equipment usually needed for large caliber weapons. When the propellant is ignited, the higher pressure gases are bled out through vents at reduced pressure to a much larger low pressure chamber to push a projectile forward. The high-low system allows the weight of the weapon and its ammunition to be reduced significantly. Production cost and time are drastically lower than for standard cannon or other small-arm weapon systems firing a projectile of the same size and weight. It has a far more efficient use of the propellant, unlike earlier recoilless weapons, where most of the propellant is expended to the rear of the weapon to counter the recoil of the projectile being fired.

<span class="mw-page-title-main">8.8 cm SK C/35 naval gun</span> Naval gun

The 8.8 cm SK C/35 was a German naval gun used in World War II.

The 7.5 cm Panzerabwehrkanone 50 or 7.5 cm Pak 50 was an anti-tank gun, produced in limited numbers by Germany, towards the end of World War II.

References

  1. S.C. 2011, Infoman. "Unikat z dna Świny trafił do naszego muzeum!". fort-gerharda.pl. Retrieved 20 May 2020.